Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compressible flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Accuracy of schemes with nonuniform meshes for compressible fluid flows

The accuracy of the space discretization for time-dependent problems when a nonuniform mesh is used is considered. Many schemes reduce to first-order accuracy while a popular finite volume scheme is even inconsistent for general grids. This accuracy is based on physical variables. However, when accuracy is measured in computational variables then second-order accuracy can be obtained. This is meaningful only if the mesh accurately reflects the properties of the solution. In addition, the stability properties of some improved accurate schemes are analyzed and it can be shown that they also allow for larger time steps when Runge-Kutta type methods are used to advance in time.

Turkel, Eli↗
NASA NTRS1989

Effect of wall cooling on the stability of compressible subsonic flows over smooth humps and backward-facing steps

The effect of wall cooling on the two-dimensional linear stability of subsonic flows over two-dimensional surface imperfections is investigated. Results are presented for flows over smooth humps and backward-facing steps with Mach numbers up to 0.8. The results show that, whereas cooling decreases the viscous instability, it increases the shear-layer instability and hence it increases the growth rates in the separation region. The coexistence of more than one instability mechanism makes a certain degree of wall cooling most effective. For the Mach numbers 0.5 and 0.8, the optimum wall temperatures are about 80 pct and 60 pct of the adiabatic wall temperature, respectively. Increasing the Mach number decreases the effectiveness of cooling slightly and reduces the optimum wall temperature.

Al-Maaitah, Ayman A.↗
NASA NTRS1990

Effect of wall cooling on the stability of compressible subsonic flows over smooth humps and backward-facing steps

The effect of wall cooling on the two-dimensional linear stability of subsonic flows over two-dimensional surface imperfections is investigated. Results are presented for flows over smooth humps and backward-facing steps with Mach numbers up to 0.8. The results show that, whereas cooling decreases the viscous instability, it increases the shear-layer instability and hence it increases the growth rates in the separation region. The coexistence of more than one instability mechanism makes a certain degree of wall cooling most effective. For the Mach numbers 0.5 and 0.8, the optimum wall temperatures are about 80 pct and 60 pct of the adiabatic wall temperature, respectively. Increasing the Mach number decreases the effectiveness of cooling slightly and reduces the optimum wall temperature.

Al-Maaitah, Ayman A.↗
NASA NTRS1990

Radiative interactions in laminar incompressible and compressible internal flows

Analyses and numerical procedures are presented to investigate the radiative interactions of gray and nongray absorbing-emitting species between two parallel plates and in a circular tube. Laminar fully developed incompressible as well as entrance region subsonic flows are considered. The participating species considered are OH, CO, CO2, CH4, and H2O. Results obtained for different flow conditions indicate that the radiative interactions can be quite significant in fully developed incompressible flows. For subsonic flows, however, the flowfield is not changed significantly due to radiative interactions.

Tiwari, S. N.↗
NASA NTRS1991

Multigrid solution of compressible turbulent flow on unstructured meshes using a two-equation model

The system of equations consisting of the full Navier-Stokes equations and two turbulence equations was solved for in the steady state using a multigrid strategy on unstructured meshes. The flow equations and turbulence equations are solved in a loosely coupled manner. The flow equations are advanced in time using a multistage Runge-Kutta time stepping scheme with a stability bound local time step, while the turbulence equations are advanced in a point-implicit scheme with a time step which guarantees stability and positively. Low Reynolds number modifications to the original two equation model are incorporated in a manner which results in well behaved equations for arbitrarily small wall distances. A variety of aerodynamic flows are solved for, initializing all quantities with uniform freestream values, and resulting in rapid and uniform convergence rates for the flow and turbulence equations.

Mavriplis, D. J.↗
NASA NTRS1990

Acoustic radiation from lifting airfoils in compressible subsonic flow

The far field acoustic radiation from a lifting airfoil in a three-dimensional gust is studied. The acoustic pressure is calculated using the Kirchhoff method, instead of using the classical acoustic analogy approach due to Lighthill. The pressure on the Kirchhoff surface is calculated using an existing numerical solution of the unsteady flow field. The far field acoustic pressure is calculated in terms of these values using Kirchhoff's formula. The method is validated against existing semi-analytical results for a flat plate. The method is then used to study the problem of an airfoil in a harmonic three-dimensional gust, for a wide range of Mach numbers. The effect of variation of the airfoil thickness and angle of attack on the acoustic far field is studied. The changes in the mechanism of sound generation and propagation due to the presence of steady loading and nonuniform mean flow are also studied.

Atassi, Hafiz M.↗
NASA NTRS1991

Navier-Stokes computation of compressible turbulent flows with a second order closure

The objective was the development of a complete second order closure for wall bounded flows, including all components of the dissipation rate tensor and a numerical solution procedure for the resulting system of equations. The main topics discussed are the closure of the pressure correlations and the viscous destruction terms in the dissipation rate equations and the numerical solution scheme based on a block-tridiagonal solver for the nine equations required for the prediction of plane or axisymmetric flows.

Dingus, C.↗
NASA NTRS1990

Acoustic radiation from lifting airfoils in compressible subsonic flow

The far field acoustic radiation from a lifting airfoil in a three-dimensional gust is studied. The acoustic pressure is calculated using the Kirchhoff method, instead of using the classical acoustic analogy approach due to Lighthill. The pressure on the Kirchhoff surface is calculated using an existing numerical solution of the unsteady flow field. The far field acoustic pressure is calculated in terms of these values using Kirchhoff's formula. The method is validated against existing semi-analytical results for a flat plate. The method is then used to study the problem of an airfoil in a harmonic three-dimensional gust, for a wide range of Mach numbers. The effect of variation of the airfoil thickness and angle of attack on the acoustic far field is studied. The changes in the mechanism of sound generation and propagation due to the presence of steady loading and non-uniform mean flow are also studied.

Atassi, Hafiz M.↗
NASA NTRS1991

Multigrid solution of compressible turbulent flow on unstructured meshes using a two-equation model

The system of equations consisting of the full Navier-Stokes equations and two turbulence equations has been solved for in the steady-state using a multigrid strategy on unstructured meshes. The flow equations and turbulence equations are solved in a loosely coupled manner. The flow equations are advanced in time using a multistage Runge-Kutta time stepping scheme with a stability bound local time-step, while the turbulence equations are advanced in a point-implicit scheme with a time-step which guarantees stability and positivity. Low Reynolds number modifications to the original two-equation model are incorporated in a manner which results in well behaved equations for arbitrarily small wall distances. A variety of aerodynamic flows are solved for, initializing all quantities with uniform freestream values, and resulting in rapid and uniform convergence rates for the flow and turbulence equations.

Mavriplis, D. J.↗
NASA NTRS1991

Diagonal implicit multigrid solution of compressible turbulent flows

The Caughey (1988) multigrid diagonal implicit algorithm for Euler equations is extended to solve the two-dimensional thin layer Navier-Stokes equations for turbulent transonic flows. To further accelerate convergence to a steady state, the implicit scheme is used within the multigrid method. Results are presented for transonic flows past airfoils, and the flow-field results are compared with other computational data and experiments demonstrating the accuracy of the method.

Varma, R. R.↗
NASA NTRS1990

A review of reduced Navier-Stokes computations for compressible viscous flows

A reduced form of the Navier-Stokes equations, defined by a single composite of the Euler, boundary layer, and triple deck approximations, is considered for the computation of viscous interacting flows. Global pressure or pseudopotential relaxation methods are integrated with coupled sparse matrix direct solvers or coupled strongly implicit ILU algorithms to efficiently capture sharp shocks and regions of recirculation. Solutions are obtained for a variety of 2D and 3D geometries and for Mach numbers (M) spanning the range from incompressible (M = 0) to supersonic (M = 6) flow.

Rubin, S. G.↗
NASA NTRS1992

Boundary conditions for direct simulations of compressible viscous flows

The present consideration of procedures for the definition of boundary conditions for the Navier-Stokes equations emphasizes the derivation of boundary conditions that are compatible with nondissipative algorithms applicable to direct simulations of turbulent flows. A novel formulation for the Euler equations is derived on the basis of characteristic wave relations through boundaries; this formulation is generalized to the Navier-Stokes equations. The method, which applies to both sub- and supersonic flows, is used in reflecting and nonreflecting boundary-condition treatments. Attention is given to practical implementations involving inlet and outlet boundaries and slip and nonslip walls, as well as the test cases of a ducted shear layer, vortices propagating through boundaries, and Poiseuille flow.

Poinsot, T. J.↗
NASA NTRS1992

A comparison of calibration techniques for hot-wires operated in subsonic compressible slip flows

This paper focuses on the correlation of constant temperature anemometer voltages to velocity, density, and total temperature in the transonic slip flow regime. Three different calibration schemes were evaluated. The ultimate use of these hot-wire calibrations is to obtain fluctuations in the flow variables. Without the appropriate mean flow sensitivities of the heated wire, the measurements of these fluctuations cannot be accurately determined.

Jones, Gregory S.↗
NASA NTRS1992

Finite-element solution scheme for compressible viscous flow

Adaptivity offers the possibility of using FEM for problems that are otherwise intractable. The solution algorithm is combined with an adaptive approach in which the unstructured portion of the grid is adaptively regenerated as the solution proceeds; the structured portion of the mesh is modified accordingly, to ensure both compatibility along the interface between the implicit and explicit element groups and increased resolution of the viscous layer. The approach offers significant computational savings in 3D simulations.

Hassan, O.↗