SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A simple heuristic algorithm for designing highly reliable modularly redundant computer systems under complexity constraints is presented. The technique, which produces near optimal solutions, is intuitively appealing and easy to apply. The algorithms performance is shown to compare very well with the optimal solution obtained via a computerized model for dynamic programming.
A second order problem is outlined for which MACSYMA was used only for checking purpose. A fourth order problem is briefly described for which a symbolic system is necessary. At the end, some sample output is displayed to indicate the complexity of the computational problem.
A technology evaluation study on axially grooved heat pipes is presented. The state-of-the-art is reviewed and present and future requirements are identified. Analytical models, the Groove Analysis Program (GAP) and a closed form solution, were developed to facilitate parametric performance evaluations. GAP provides a numerical solution of the differential equations which govern the hydrodynamic flow. The model accounts for liquid recession, liquid/vapor shear interaction, puddle flow as well as laminar and turbulent vapor flow conditions. The closed form solution was developed to reduce computation time and complexity in parametric evaluations. It is applicable to laminar and ideal charge conditions, liquid/vapor shear interaction, and an empirical liquid flow factor which accounts for groove geometry and liquid recession effects. The validity of the closed form solution is verified by comparison with GAP predictions and measured data.
A method of obtaining test data from two independent models or bodies in a conventional wind tunnel is described. The system makes efficient use of wind tunnel test time with computer control performing complex coordinate transformations necessary for model positioning. The apparatus is designed to be used in any of the three Unitary Wind Tunnels at NASA-Ames Research Center. Mechanical design details and a brief description of the control system for the separation apparatus are presented.
A process for adjusting perturbation magnitude for accurate difference-quotient estimation of derivatives is described. The process is intended to be carried out sequentially, alternating with iterations of a parameter-optimization algorithm. A more complex and computationally-expensive scheme for occasional auxiliary use is also described.
The strategies for managing computer based geometry are described. The computer model of geometry is the basis for communication, manipulation, and analysis of shape information. The research on integrated programs for aerospace-vehicle design (IPAD) focuses on the use of data base management system (DBMS) technology to manage engineering/manufacturing data. The objectives of IPAD is to develop a computer based engineering complex which automates the storage, management, protection, and retrieval of engineering data. In particular, this facility must manage geometry information as well as associated data. The approach taken on the IPAD project to achieve this objective is discussed. Geometry management in current systems and the approach taken in the early IPAD prototypes are examined.
The systems of truncated differential equations that have been proposed to reduce the complexity and large computational costs of solutions to the full Navier-Stokes equations are considered. These systems are computationally efficient and capture all the physically relevant behavior. The systems follow a certain hierarchy: (1) the classical boundary-layer equations with specified edge properties (usually the streamwise pressure distribution); (2) the coupled boundary-layer/inviscid equations; (3) the so-called thin-layer equations that discard streamwise diffusion; and (4) the Navier-Stokes equations. Consideration is given to each of these approximations applied to an incompressible, laminar-separating flow at low and moderate Reynolds numbers. It is pointed out that for any flow or region of flow for which viscous-inviscid interaction effects are small, classical boundary-layer equations will provide a satisfactory description of the viscous flow at a fraction of the computational cost of any higher approximations.
Experimental modal analysis is extremely important with regard to verification of analytical models, identification of vibration and acoustic problems, and structural modification and sensitivity analysis. With the expanding access of the testing environment to computational power, the complexity of existing approaches, as well as the development of new approaches, to the estimation of modal parameters has grown tremendously. Currently, the state of the art in experimental modal analysis involves methods that can be grouped in four categories: forced normal mode excitation method, frequency response function method, damped complex exponential function method, and mathematical input-output model methods. The theoretical basis of each of these general approaches, with appropriate references, is reviewed briefly.
A three-dimensional (3-D) chimera grid-embedding technique is described. The technique simplifies the construction of computational grids about complex geometries. The method subdivides the physical domain into regions which can accommodate easily generated grids. Communication among the grids is accomplished by interpolation of the dependent variables at grid boundaries. The procedures for constructing the composite mesh and the associated data structures are described. The method is demonstrated by solution of the Euler equations for the transonic flow about a wing/body, wing/body/tail, and a configuration of three ellipsoidal bodies.
Specialty methods are presented for the computational simulation of specific composite behavior. These methods encompass all aspects of composite mechanics, impact, progressive fracture and component specific simulation. Some of these methods are structured to computationally simulate, in parallel, the composite behavior and history from the initial fabrication through several missions and even to fracture. Select methods and typical results obtained from such simulations are described in detail in order to demonstrate the effectiveness of computationally simulating (1) complex composite structural behavior in general and (2) specific aerospace propulsion structural components in particular.
The Fluid Dynamics Panel of AGARD arranged a Symposium on Applications of Computational Fluid Dynamics in Aeronautics, on 7 to 10 April 1986 in Aix-en-Provence, France. The purpose of the Symposium was to provide an assessment of the status of CFD in aerodynamic design and analysis, with an emphasis on emerging applications of advanced computational techniques to complex configurations. Sessions were devoted specifically to grid generation, methods for inviscid flows, calculations of viscous-inviscid interactions, and methods for solving the Navier-Stokes equations. The 31 papers presented at the meeting are published in AGARD Conference Proceedings CP-412 and are listed in the Appendix of this report. A brief synopsis of each paper and some general conclusions and recommendations are given.
Specialty methods are presented for the computational simulation of specific composite behavior. These methods encompass all aspects of composite mechanics, impact, progressive fracture and component specific simulation. Some of these methods are structured to computationally simulate, in parallel, the composite behavior and history from the initial frabrication through several missions and even to fracture. Select methods and typical results obtained from such simulations are described in detail in order to demonstrate the effectiveness of computationally simulating: (1) complex composite structural behavior in general, and (2) specific aerospace propulsion structural components in particular.
In September of 1984, NASA performed a series of experiments on orbit with a large solar wing attached to the Space Shuttle orbiter. These experiments, the Solar Array Flight Experiment (SAFE), mark the first tests of a large space structure in space. Extension, retraction, and dynamic tests had to be performed in space due to the fragility of the solar array. Due to the extendable and retractable design of the solar array, accelerometers and associated wires could not be used; therefore, remote sensing, the Dynamics Augmentation Experiment (DAE), was added to the SAFE program. The DAE uses a remote sensor based on star tracker technology to measure the dynamic response of the solar array. The DAE sensor tracked 18 targets on the solar array during free-decay response to a transient excitation. An overview of the SAFE/DAE is presented, highlighting analysis results from the remotely sensed data. Modal parameter estimates from the remotely sensed data were computed using the complex exponential and polyreference techniques.
Number of arms increased without introducing undue complexity. Strategy and computer architecture developed for simultaneous control of positions of number of robot arms manipulating same object and of forces and torques that arms exert on object. Scheme enables coordinated manipulation of object, causing it to move along assigned trajectory and be subjected to assigned internal forces and torques.
An attempt is made to give a unified and generalized formulation of a class of high resolution, explicit and implicit shock capturing methods, and to illustrate their versatility in various steady and unsteady complex shock wave computations. Included is a systematic review of the basic design principle of the various related numerical methods. Special emphasis is on the construction of the basis nonlinear, spatially second and third order schemes for nonlinear scalar hyperbolic conservation laws and the methods of extending these nonlinear scalar schemes to nonlinear systems via the approximate Riemann solvers and the flux vector splitting approaches. Generalization of these methods to efficiently include equilibrium real gases and large systems of nonequilibrium flows are discussed. Some issues concerning the applicability of these methods that were designed for homogeneous hyperbolic conservation laws to problems containing stiff source terms and shock waves are also included. The performance of some of these schemes is illustrated by numerical examples for 1-, 2- and 3-dimensional gas dynamics problems.
Job scheduling is a deceptively complex subfield of computer science. The highly combinatorial nature of the problem, which is NP-complete in nearly all cases, requires a scheduling program to intelligently transverse an immense search tree to create the best possible schedule in a minimal amount of time. In addition, the program must continually make adjustments to the initial schedule when faced with last-minute user requests, cancellations, unexpected device failures, quests, cancellations, unexpected device failures, etc. A good scheduler must be quick, flexible, and efficient, even at the expense of generating slightly less-than-optimal schedules. The Space Communication Scheduler (SCS) is an intelligent rule-based scheduling system. SCS is an adaptive deadline scheduler which allocates modular communications resources to meet an ordered set of user-specified job requests on board the NASA Space Station. SCS uses pattern matching techniques to detect potential conflicts through algorithmic and heuristic means. As a result, the system generates and maintains high density schedules without relying heavily on backtracking or blind search techniques. SCS is suitable for many common real-world applications.
The use of simplified error models to accurately simulate and evaluate the performance of an optical linear-algebra processor is described. The optical architecture used to perform banded matrix-vector products is reviewed, along with a linear dynamic finite-element case study. The laboratory hardware and ac-modulation technique used are presented. The individual processor error-source models and their simulator implementation are detailed. Several significant simplifications are introduced to ease the computational requirements and complexity of the simulations. The error models are verified with a laboratory implementation of the processor, and are used to evaluate its potential performance.
The internal carriage of stores by the military aircraft is an option, particularly at high speeds, for a possible reduction in the aerodynamic drag and in the radar observability. Trade studies of this option, which include the safe separation of stores from their bays and aerodynamic complications of a cavity flow, require studying the aircraft and the stores together. With this motivation, the computer code, VISCC, is developed to solve the three-dimensional, Reynolds-averaged, unsteady, compressible, and complete Navier-Stokes equations. The store considered here for simulation is a missile configuration with four tail fins and an L-shaped offset sting. The missile is placed first directly above the opening of a rectangular box cavity, then submerged completely inside the cavity. The freestream Mach and the unit Reynolds numbers are 2.75 and 2.97 million per foot, respectively. The results of the time-accurate computations depict these complex flows and help understanding the interference effects. The time-averaged surface pressures compare favorably with the available wind tunnel data.