Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “calcite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Variability in Modelled Airborne Dust Mineralogy Derived from Global Soil Composition Uncertainties

Dust aerosols consist on a variety of minerals with different physic and chemical properties. As such, they interact with short and long wave radiation, potentially form clouds, act as nutrients modulating biogeochemical cycles, or influence atmospheric chemistry, differently. Most current state-of-the-art Earth System Models (ESMs) neglect the complexity in dust composition, mainly due to computational constraints, but also to the existing uncertainties in the size resolved composition of parent soils, the resulting distribution of minerals in airborne dust, and the scarcity of observations to constrain them. Within this work, we assess the variability of global dust composition due to uncertainties in the characterization of the parent soil mineralogy. To that end, we consider two available global soil mineralogy atlases, developed by Claquin et al. (1999) –C1999- and Journet et al. (2014) –J2014-, which represent respectively 8 and 12 relevant minerals for climate (namely: illite, smectite/montmorillonite, kaolinite, calcite, gypsum, hematite, quartz, and feldspars in C1999, and those plus chlorite, vermiculite, goethite, and mica in J2014). Thanks to a recently developed feature of the MONARCH atmospheric-chemistry model, we are able to explicitly resolve the minerals’ atmospheric cycle. Therefore, we define two global experiments to assess changes on airborne dust composition attributed to the soil mineralogy assumptions and provide a measure of their variability. We also perform a preliminary evaluation of the global mineralogy results against available observations of mineral fractions in surface dust concentration. Our results will inform the climate modelling community about the potential variability in dust composition, an aspect that will gain relevance as ESMs continue growing in complexity and new processes to better characterize aerosols’ forcing or biogeochemical cycles are added. Further observational constraints, such as those that will derive from the EMIT NASA mission on soil composition or the FRAGMENT experimental campaigns on airborne dust characterization, will be key in the near future to improve our understanding of the impact of dust mineralogy on fundamental climate features.

Dust aerosols↗
NASA NTRS2021

Evidence for the Protection of N-heterocycles from Gamma Radiation by Mars Analogue Minerals

Organic compounds have been delivered to the surface of Mars via meteorites, comets and interplanetary dust particles for billions of years. Determining the effects of high energy radiation and galactic cosmic radiation (GCR) on these organic compounds is critical for understanding the potential for the preservation of organic molecules associated with past or present life, and where to look for possible chemical bio- signatures during future Mars missions. Understanding how these effects are attenuated by the mineral matrix and the depth at which they are buried have been challenging to determine in situ on Mars. There have been very few experimental studies on the survival of organic compounds under radiation from a gamma source under realistic conditions, and their interpretation until now has been difficult due to the lack of data for actual radiation levels on Mars. Using the in-situ data obtained by the MSL/RAD instrument to anchor the dose calculations, here we show that the N-heterocycles purine and uracil, crucial components of biochemical processes in extant living systems, mixed with calcite, anhydrite, and kaolinite as Mars analogue minerals can survive the effects of radiation with a dose corresponding to ~500,000 years on the Martian surface. The extent of survival varied not only with the nature of the organic compound, but its depth from the surface. These results provide new experimental data for the degree of protection offered by the regolith, in conjunction with minerals, for organic compounds that may be present on Mars.

mars↗
NASA NTRS2021

Hypogenic Karst of the Great Basin

Discoveries in the 1980s greatly expanded speleologists’ understanding of therole that hypogenic groundwater flow can play developingcaves at depth. Ascending groundwater charged with carbon dioxide and,especially,hydrogen sulfide,can readily dissolve carbonate bedrock just below and above the water table. Sulfuric acid speleogenesis, in which anoxic, rising, sulfidic groundwater mixes with oxygenated cave atmosphere to form aggressive sulfuric acid (H2SO4), formed spectacular caves in CarlsbadCaverns National Park. Cueva de Villa Luz in Mexico provides an aggressively active example of sulfuric acid speleogenesisprocesses, and the Frasassi Caves in Italy preserve the results of sulfuric acid speleogenesis in its upper levels while sulfidic groundwater currently enlarges cave passages in the lower levels. Manycaves in east-central Nevada and western Utah are products of hypogenic speleogenesis and formed before the current topography fully developed. Wet climate during the late Neogeneand Pleistocene brought extensive meteoric infiltration into the caves and calcite speleothems (e.g., stalactites, stalagmites, shields) coat the walls and floors of the caves, concealing evidence of the earlier hypogenic stage. However, by studying the speleogenetic features in well-established sulfuric acid speleogenesis caves, evidence ofhypogenic, probably sulfidic, speleogenesis inmany Great Basin caves can be teased out.Compelling evidence of hypogenicspeleogenesis in these cavesinclude folia, mammillaries, bubble trails, cupolas, and metatyuyamunite. Sulfuric acid speleogenesis signsinclude hollowcoralloidstalagmites,trays, gypsum crust, pseudoscallops, rills, and acid pool notches. Lehman Caves is particularly informative as a low-permeability capstone protected about half of the cave from significant meteoric infiltration, preserving early speleogeneticfeatures.

Louise D Hose↗
NASA NTRSDate not supplied

Constraints on triple oxygen isotope kinetics

The general assumption that systems are in equilibrium is convenient, but imperfect. Instead, the partial or full expression of kinetic reaction steps may need to be determined. Using an isotope fractionation Monte-Carlo model under the harmonic approximation (Figure 1 envelopes), we find the range of kinetic isotope effects (i.e., resulting from unidirectional chemical reactions) contains and exceeds the range of accessible equilibrium isotope effects. For the 16O-17O-18O system, accessible kinetic isotope effects can yield Δ′17O variations as large 0.8‰ from a single kinetic fractionation step. Reactions that yield the largest deviations from equilibrium are those with the largest molecular mass difference between decomposition fragments, typically the two products, such as a gas and solid generated from the thermal decomposition of an initial solid. For example, previously published experiments on the thermal decomposition of calcite (CaCO3) and dehydroxylation of brucite (Mg(OH)2) are matched by density functional theory models of each kinetic isotope effect, thus revealing their origin in mass-dependent reaction. Beyond oxygen, our approach applies to any system with more than two isotopes.

Oxygen isotopes↗
NASA NTRSDate not supplied

Less-Altered CI Lithology in the Kaidun Meteorite Breccia

One of the most interesting initial results of the characterization of the asteroid Ryugu regolith material returned by the Hayabusa2 spacecraft is the presence of a significant quantity of less-aqueously altered CI material, tentatively called “CI2”. This lithology is characterized by an approximately ten-fold increase in the amount of an hydrous ferromagnesian silicates over what is found n CI1 chondrites, with these being principally olivine, low- and high-calcium pyroxene. Remnant CAI phases are found as well as probable chondrule fragments. Magnetite, pyrrhotite and hydroxyapatite are abundant. The main carbonate is calcite. Matrix is mainly a mixture of saponite and serpentine phases. Assuming that this lithology should be a better representative of the more “primordial” mineralogy of early nebular solids than more processed CI1 material, we have been re-examining CI lithologies found as separate meteorites as well as clasts in other meteorites, seeking similar CI2 material. The Kaidun breccia is notorious for including almost every type of meteorite class except CR2 (which is ironic considering that Kaidun is still officially classified as CR2). We report here the discovery of a probable CI2 lithology in one carbonaceous chondrite-rich Kaidun sample.

Michael Zolensky↗
NASA NTRS2022

On the paragenetic modes of minerals: A mineral evolution perspective

A systematic survey of 57 different paragenetic modes distributed among 5659 mineral species reveals patterns in the diversity and distribution of minerals related to their evolving formational environments. The earliest minerals in stellar, nebular, asteroid, and primitive Earth contexts were dominated by relatively abundant chemical elements, notably H, C, O, Mg, Al, Si, S, Ca, Ti, Cr, and Fe. Significant mineral diversification subsequently occurred via two main processes, first through gradual selection and concentration of rarer elements by fluid-rock interactions (for example, in hydrothermal metal deposits, complex granite pegmatites, and agpaitic rocks), and then through near-surface biologically mediated oxidation and weathering. We find that 3349 mineral species (59.2%) are known from only one paragenetic context, whereas another 1372 species (24.2%) are associated with two paragenetic modes. Among the most genetically varied minerals are pyrite, albite, hornblende, corundum, magnetite, calcite, hematite, rutile, and baryte, each with 15 or more known modes of formation. Among the most common paragenetic modes of minerals are near-surface weathering/oxidation (1998 species), subsurface hydrothermal deposition (859 species), and condensation at volcanic fumaroles (459 species). In addition, many species are associated with compositionally extreme environments of highly differentiated igneous lithologies, including agpaitic rocks (726 species), complex granite pegmatites (564 species), and carbonatites and related carbonate-bearing magmas (291 species). Biological processes lead to at least 2707 mineral species, primarily as a consequence of oxidative weathering but also through coal-related and other taphonomic minerals (597 species), as well as anthropogenic minerals, for example as byproducts of mining (603 minerals). However, contrary to previous estimates, we find that only ~34% of mineral species form exclusively as a consequence of biological processes. By far the most significant factor in enhancing Earth’s mineral diversity has been its dynamic hydrological cycle. At least 4583 minerals—81% of all species—arise through water-rock interactions. A timeline for mineral-forming events suggests that much of Earth’s mineral diversity was established within the first 250 million years. If life is rare in the universe, then this view of a mineralogically diverse early Earth provides many more plausible reactive pathways over a longer timespan than previous models. If, however, life is a cosmic imperative that emerges on any mineral- and water-rich world, then these findings support the hypothesis that life on Earth developed rapidly in the early stages of planetary evolution

Robert M. Hazen↗
NASA NTRS2019

Forearc Carbon Sink Reduces Long-Term Volatile Recycling Into the Mantle

Carbon and other volatiles are transported from Earth’s surface into the mantle at subduction margins. The efficiency of this transfer has profound implications for the nature and scale of geochemical heterogeneities in Earth’s deep (mantle) and shallow (crustal) reservoirs, as well as Earth’s oxidation state. However, the proportion of volatiles released in the forearc and backarc are not well constrained compared to fluxes from the volcanic front. Here, we use helium and carbon isotope data from deeply sourced springs along two cross-arc transects to show that ~91% of carbon released from the slab/mantle beneath the Costa Rica forearc is sequestered within the crust by calcite deposition, and an additional ~3% is incorporated into biomass through microbial chemolithoautotrophy. We estimate that ~1.2 × 10(exp 8) to 1.3 × 10(exp 10) mol CO2/yr are released from the slab beneath the forearc, resulting in up to ~19% less carbon being transferred to Earth’s deep mantle than previously estimated.

Carbon cycle↗
NASA NTRS2020

The Old, Unique C1 Chondrite Flensburg – Insight Into the First Processes of Aqueous Alteration, Brecciation, and the Diversity of Water-Bearing Parent Bodies and Lithologies

On September 12, 2019 at 12:49:48 (UT) a bolide was observed by hundreds of eye-witnesses from the Netherlands, Germany, Belgium, Denmark and the UK. One day later a small meteorite stone was found by accident in Flensburg. The presence of short-lived cosmogenic radionuclides with half-lives as short as 16 days proves the recent exposure of the found object to cosmic rays in space linking it clearly to the bolide event. An exceptionally short exposure time of ∼5000 years was determined. The 24.5 g stone has a fresh black fusion crust, a low density of <2 g/cm(exp 3), and a magnetic susceptibility of logχ = 4.35 (χ in 10−9 m(exp 3)/kg). The rock consists of relict chondrules and clusters of sulfide and magnetite grains set in a fine-grained matrix. The most abundant phases are phyllosilicates. Carbonates (∼3.9 vol.%) occur as calcites, dolomites, and a Na-rich phase. The relict chondrules (often surrounded by sulfide laths) are free of anhydrous silicates and contain abundant serpentine. Lithic clasts are also surrounded by similar sulfide laths partly intergrown with carbonates. Mn-53-Cr-53 ages of carbonates in Flensburg indicate that brecciation and contemporaneous formation of the pyrrhotite-carbonate intergrowths by hydrothermal activities occurred no later than 4564.6 ± 1.0 Ma (using the angrite D'Orbigny as the Mn-Cr age anchor). This corresponds to 2.6 ± 1.0 or 3.4 ± 1.0 Ma after formation of CAIs, depending on the exact absolute age of CAIs. This is the oldest dated evidence for brecciation and carbonate formation, which likely occurred during parent body growth and incipient heating due to decay of Al-26. In the three oxygen isotope diagram, Flensburg plots at the 16O-rich end of the CM chondrite field and in the transition field to CV-CK-CR chondrites. The mass-dependent Te isotopic composition of Flensburg is slightly different from mean CM chondrites and is most similar to those of the ungrouped C2 chondrite Tagish Lake. On the other hand, Ti-50 and Cr-54 isotope anomalies indicate that Flensburg is similar to CM chondrites, as do the ∼10 wt.% H2O of the bulk material. Yet, the bulk Zn, Cu, and Pb concentrations are about 30% lower than those of mean CM chondrites. The He, Ne, and Ar isotopes of Flensburg show no solar wind contribution; its trapped noble gas signature is similar to that of CMs with a slightly lower concentration of Ne(sub tr)-20. Based on the bulk H, C, and N elemental abundances and isotopic compositions, Flensburg is unique among chondrites, because it has the lightest bulk H and N isotopic compositions of any type 1 or 2 chondrite investigated so far. Moreover, the number of soluble organic compounds in Flensburg is even lower than that of the brecciated CI chondrite Orgueil. The extraordinary significance of Flensburg is evident from the observation that it represents the oldest chondrite sample in which the contemporaneous episodes of aqueous alteration and brecciation have been preserved. The characterization of a large variety of carbonaceous chondrites with different alteration histories is important for interpreting returned samples from the OSIRIS-REx and Hayabusa 2 missions.

C1 chondrite↗
NASA NTRS2020

Cycling phosphorus on the Archean Earth: Part II. Phosphorus limitation on primary production in Archean ecosystems

Several lines of evidence point to low rates of net primary production (NPP) in Archean oceans. However, whether Archean NPP was limited by electron donors or nutrients, particularly phosphorus (P), and how these factors might have changed over a billion years of recorded Archean history, remains contentious. One major challenge is to understand quantitatively the biogeochemical cycling of P on the early Earth. In Part I of this series (Hao et al., 2020), we estimated the weathering flux of P to the oceans as a function of temporally increasing continental emergence and elevation through Archean time. In Part II, we conduct thermodynamic and kinetic simulations to understand key processes of P cycling within the Archean ocean, including seafloor weathering, recycling of organic P, the solubility and precipitation of secondary phosphate minerals, and the burial diagenesis of P precipitates. Our calculations suggest low solubilities of apatite minerals in Archean seawater, primarily due to nearly neutral pH and high levels of Ca. This low solubility, in turn, implies a negligible contribution of apatite dissolution to P bioavailability in Archean seawater. We also simulate the solubility limits of common secondary P-bearing minerals, showing that vivianite would have been the least soluble P mineral in ferruginous Archean seawater (0.1–0.3 µM), even at moderate supersaturation states (Ω = 100 or 1000). If vivianite precipitation was kinetically favorable by microbial activities and mineral adsorption, the sinking flux of P as vivianite in Archean seawater could have reached the modern sinking flux, implying that vivianite precipitation was a potentially major sink for P in Archean oceans. During burial diagenesis, however, vivianite in porewater would have become less stable than Ca-phosphates of lower solubility. At elevated temperatures (>100 °C) associated with burial diagenesis and low-grade metamorphism, vivianite is predicted to react irreversibly with calcite to form apatite. Optimistic assumptions about the recycling efficiency of P on the Archean Earth lead us to estimate that by the end of the eon the total flux of P (continental weathering + recycling) could have supported NPP at levels up to 7% of the modern. The total flux of P would have been much lower on the early and middle Archean Earth, whereas fluxes of electron donors could have been higher, suggesting very low productivity and P-limitation of marine ecosystems during much of the eon. Comparing our estimates of NPP as limited by P supply with the estimate by Ward et al. (2019), in which NPP was limited by electron donors and metabolic efficiency, there could have been a transition between P-limited productivity in the early to middle Archean to electron donor-limitation closer to the eon’s end (assuming no oxygenic photosynthesis). Once oxygenic photosynthesis reached ecological significance, probably near the end of the Archean, our estimated flux of P would allow rapid oxidation of atmosphere.

Vivianite↗
NASA NTRSDate not supplied

Constraints on Triple Oxygen Isotope Kinetics

Triple oxygen isotope methods (e.g., using δ 18 O, and Δ′ 17 O) have been used to classify meteorites, to constrain atmospheric chemistry, and to estimate primary productivity, among other uses. Such utility relies on the mass dependency of most chemical reactions: δ 17 O is proportional to δ 18 O by roughly a factor of 0.5. However, in detail, mass-dependency factors vary. While constraints on mass dependency are well established for equilibrium isotope effects, similar constraints for kinetic isotope effects are lacking. Using an ab initio Monte Carlo approach (see envelopes in Figure 1), we find the range of kinetic isotope effects (i.e., resulting from unidirectional chemical reactions) contains and exceeds the range of accessible equilibrium isotope effects for the 16 O 17 O 18 O system (Hayles and Killingsworth, 2022). Accessible kinetic isotope effects can yield Δ′ 17 O variations as large 0.8 ‰ from a single kinetic fractionation step. Reactions that yield the largest deviations from equilibrium are those with the largest molecular mass difference between decomposition fragments, typically the two products such as a gas and solid generated from the thermal decomposition of an initial solid. Comparison of DFT transition state model results against previously published experiments on the thermal decomposition of calcite (CaCO 3 ) (Miller et al., 2002) and dehydroxylation of brucite (Mg(OH) 2 ) (Clayton and Mayeda, 2009) show they are matched with mass-dependent kinetic isotope effects. This approach can be applied to any system with more than two isotopes.

Oxygen isotopes↗
NASA NTRSDate not supplied

Isotopic Tracers for CO 2 Produced During A Planetary Impact Into Limestone Target Rocks

Terrestrial meteorite impacts have been directly linked with multiple mass extinction events throughout Earth’s history. Among these impacts, those that land in sedimentary target rocks are thought to generate large quantities of CO 2 via decarbonation. This injection of CO 2 into the atmosphere has the potential to alter the climate and threaten terrestrial habitability. The magnitude of this change depends upon the net amount of CO 2 released, which is controlled by how much CO 2 is produced by the impact, how much CO 2 is removed by back-reactions after the impact, and other post-impact CO 2 sinks. To interrogate the behavior of CO 2 release into the impact atmosphere, we present carbon (δ 13 C), oxygen (δ 18 O), and clumped (Δ 47 ) isotope results from carbonate clasts preserved within the impact breccia of the Steen River Impact Structure (SRIS) in Alberta, Canada. These clasts exhibit a ~65‰ range in δ 13 C and a ~5‰ variation in δ 18 O. However, while δ 13 C and δ 18 O are positively correlated, Δ 47 unexpectedly has a negative relationship with δ 13 C and δ 18 O. Based on prior assumptions, there would either be (1) no relationship with carbonate Δ 47 and the bulk ratios because Δ 47 would be reset at extreme impact temperatures, or (2) Δ 47 would have a positive correlation with the bulk ratios, reflecting gradual Δ 47 ‘resetting.’ To reconcile the SRIS result with these expectations, we conducted a series of in vacuo heating experiments at temperatures above calcite decomposition. As predicted by Rayleigh fractionation, these heating experiments generated depletions in δ 13 C and δ 18 O that increased with reaction time. Mimicking the SRIS results, these experiments also produced concomitant increases in Δ 47 . Using an adaptation of a mechanistic model for decomposition fractionation (Hayles & Killingsworth, 2022) we hypothesize that these exotic isotope trends are caused by Rayleigh fractionation and a Δ 47 kinetic isotope effect that results from the disproportionation of O to CaO and CO 2 during thermal decomposition. This high Δ 47 CO 2 subsequently exchanges with the residual CaCO 3 . This work highlights a potential pathway for identifying and quantifying CO 2 generation by impacts and builds on the relatively limited literature characterizing the behavior of carbonate clumped isotopes at very high geologic temperatures.

Multi-isotope systems↗
NASA NTRSDate not supplied

Trade-Offs of Simplified Versus Comprehensive Representation of Mineralogy When Studying Dust Impacts on Earth’s Climate Systems

The intensity and direction of dust impacts on Earth’s climate systems depend on mineral composition. For example, the presence or absence of a few percent of iron oxides in dust will determine if dust is warming or cooling the atmosphere. Similarly, feldspar will enhance ice cloud formation, while acid gases in the atmosphere will react on the surface of dust calcite limiting acid rain. Still, most climate models use a simplified representation of dust mineralogy. They assume a fixed composition at emission which stays invariant during transport and removal. Such simplification assumes spatially and temporally constant physical and chemical properties of dust, and appears to provide satisfactory results when comparing some properties with observations. The trade-off is their lack of spatial gradients, which will fail to induce circulation, cloud and precipitation changes. The two reasons to omit mineral variations are the uncertainty of current atlases of soil mineral composition in arid regions, and, more practically, an improved runtime efficiency. The former reason is losing ground with the recent launch (July 2022) of a dedicated mission (NASA/JPL EMIT) to retrieve global soil mineralogy of dust sources at high spatial resolution. While the EMIT science team is finalizing a satisfactory global map of mineral composition of dust sources, we analyzed the interaction of dust mineralogy on radiation and its impact on the fast temperature response using different representations of mineral composition from detailed and spatially varying to simplified and globally uniform, assuming different hematite contents and methods to calculate optical properties. Our results show that resolving dust mineralogy reduces dust absorption, and results in improved agreement with observation-based single scattering albedo (SSA), radiative fluxes from CERES (the Clouds and the Earth’s Radiant Energy System), and land surface temperature from CRU (Climatic Research Unit), compared to the baseline bulk dust model version. It also results in distinct radiative impacts on Earth’s climate over North Africa. From our 19-year simulation, we will show that it leads to a reduction of over 50% in net downward radiation at top of atmosphere (TOA) across the Sahara and an approximately 20% reduction over the Sahel. We will explain how the surface temperature response affects the monsoon flow from the Gulf of Guinea. Interestingly, we find similar results by simply fixing the hematite content of dust to a globally uniform value of 0.9% by volume. We will discuss the underlying reasons for such results and show that they may be unrelated to the distribution of soil mineralogy. Still, an accurate representation of soil mineralogy is necessary to better understand dust impacts on the Earth’s climate systems.

dust impacts↗
NASA NTRS2024

Modeling Impacts of Dust Mineralogy on Fast Climate Response

Mineralogical composition drives dust impacts on Earth's climate systems. However, most climate models still use homogeneous dust, without accounting for the temporal and spatial variation in mineralogy. To quantify the radiative impact of resolving dust mineralogy on Earth's climate, we implement and simulate the distribution of dust minerals (i.e., illite, kaolinite, smectite, hematite, calcite, feldspar, quartz, and gypsum) from Claquin et al. (1999) (C1999) and activate their interaction with radiation in the GFDL AM4.0 model. Resolving mineralogy reduces dust absorption compared to the homogeneous dust used in the standard GFDL AM4.0 model that assumes a globally uniform hematite volume content of 2.7 % (HD27). The reduction in dust absorption results in improved agreement with observation-based single-scattering albedo (SSA), radiative fluxes from CERES (the Clouds and the Earth's Radiant Energy System), and land surface temperature from the CRU (Climatic Research Unit) compared to the baseline HD27 model version. It also results in distinct radiative impacts on Earth's climate over North Africa. Over the 19-year (from 2001 to 2019) modeled period during JJA (June–July–August), the reduction in dust absorption in AM4.0 leads to a reduction of over 50 % in net downward radiation across the Sahara and approximately 20 % over the Sahel at the top of the atmosphere (TOA) compared to the baseline HD27 model version. The reduced dust absorption weakens the atmospheric warming effect of dust aerosols and leads to an alteration in land surface temperature, resulting in a decrease of 0.66 K over the Sahara and an increase of 0.7 K over the Sahel. The less warming in the atmosphere suppresses ascent and weakens the monsoon inflow from the Gulf of Guinea. This brings less moisture to the Sahel, which combined with decreased ascent induces a reduction of precipitation. To isolate the effect of reduced absorption compared to resolving spatial and temporal mineralogy, we carry out a simulation where the hematite volume content of homogeneous dust is reduced from 2.7 % to 0.9 % (HD09). The dust absorption (e.g., single-scattering albedo) of HD09 is comparable to that of the mineralogically speciated model on a global mean scale, albeit with a lower spatial variation that arises solely from particle size. Comparison of the two models indicates that the spatial inhomogeneity in dust absorption resulting from resolving mineralogy does not have significant impacts on Earth's radiation and climate, provided there is a similar level of dust absorption on a global mean scale before and after resolving dust mineralogy. However, uncertainties related to emission and distribution of minerals may blur the advantages of resolving minerals to study their impact on radiation, cloud properties, ocean biogeochemistry, air quality, and photochemistry. On the other hand, lumping together clay minerals (i.e., illite, kaolinite, and smectite), but excluding externally mixed hematite and gypsum, appears to provide both computational efficiency and relative accuracy. Nevertheless, for specific research, it may be necessary to fully resolve mineralogy to achieve accuracy.

Soil dust↗
DOE OSTI2020

Flotation of Bastnaesite Ore Using Novel Collectors

Interest in rare earth elements (REEs) has increased due to their distinct properties and new applications. China currently has a monopoly on rare earth production due to the lack of an economically viable process used outside of China. Bastnaesite, a rare earth fluorocarbonate, is one of the most common minerals containing REEs, which is mostly comprised of cerium and other light REEs. The objective of this research is to find a novel collector for the beneficiation of bastnaesite through froth flotation experiments to increase the grade and recovery of rare earth oxides while rejecting the major gangue minerals. Microflotation and rougher bench flotation studies were evaluated to find optimal collector(s) from 19 possible candidates. Collector 2, 5, and 8 were the top performing collectors chosen from microflotation experiments. A design of experiment matrix was set up to evaluate the variables, variable interactions and provide a reverence matrix for future optimization studies. Collector 2 was assessed to be the optimal collector. A rougher flotation experiment produced a rare earth oxide grade and recovery of 41% and 78% respectively and a 91.5% rejection of calcite. Collector 8 and 14 also showed promising results in replace fatty acid.

Everly, Dylan↗
DOE OSTI2021

Raman Microscopy Analysis of Wyoming CarbonSAFE Pilot Well Thin Sections for Mineralogy and Organic Matter Characterization

Scanning confocal Raman microspectroscopy (RMS) was used to analyze thin sections for inorganic mineral content and for evaluation of organic material (OM). Thin sections were selected from a stratigraphic test well core in the Powder River Basin, Wyoming under the Wyoming CarbonSAFE project. The well was analyzed with a variety of rock and fluid characterization techniques to determine the feasibility of a commercial-scale CO2 storage site. RMS complements other analyses, including traditional petrography, SEM, porosity and permeability, and XRD For this aspect of the study, RMS is especially important in the evaluation of OM in sealing lithologies. At prospective geologic CO2 storage sites, it is imperative to assess the unconventional oil and gas potential of seals to ensure that any future development would not compromise the integrity of the seals. Whole-slide mineralogical surveys were performed on thin sections from various shale and sandstone formations. Surveys were analyzed with Direct Classical Least Squares to identify and quantify minerals. The location and concentration of minerals was color-coded and overlaid on optical images for visualization of the distribution of minerals. Dense hyperspectral Raman mapping of OM was performed on five thin sections. Eleven spectral parameters diagnostic of organic type and thermal maturity were used to train a Partial Least Squares (PLS) calibration against a set of artificially matured samples spanning the pre- to mid-oil window. The PLS was applied to the study set and a post-mature set. Additionally, the PLS was applied to each point in hyperspectral maps for visualization of trends in maturity across sample sets and discrimination of organic matter types within a given map. In inorganic surveys on thin sections, a total of 14 unique inorganic minerals were identified in Raman spectra including quartz, dolomite, calcite, hematite and anhydrite. Shale thin sections tended to be dominated by organic material. OM was often observed mixed with inorganic minerals. Sand- and mudstones were dominated by inorganic minerals. The PLS extrapolated the post-mature set to reflectances >1.2%. The study set ranged from very immature to postmature in the median of map fit-peak parameters. However, point maturity maps indicate that matrix OM in all study samples is immature and that discreet organic particles selected for mapping, which may be inertinites, bias medians towards more-mature. The work demonstrates the capabilities of RMS to perform both whole-slide mineralogy and OM analysis with applications to formation evaluation in oil & gas, carbon sequestration and mining. Here, analysis of sealing formations in the well indicates high levels of immature organic matter that would not be a viable target for future oil production that could compromise the CO2 storage site. The work brings together diverse disciplines from geology and petrography to analytical chemistry, big data and microscopy.

Myers, Grant↗
DOE OSTI2021

Combined Structural Analysis of Core and Image Log of TGH 76-31 South East of Mt Baker, Washington State

Despite active volcanism, few geothermal energy resources have been developed in the Cascades Range. Temperature Gradient Hole 76-31 was drilled to ~440 m measured depth to probe for zones where fractures provide fluid conduits that transport deep volcanic heat to shallow depths that could support baseload, carbon neutral electrical generation. These zones were predicted by a Play Fairway assessment (PFA) of resource potential along a zone 11 km west-southwest of the summit of Mount Baker Volcano. Rock core, temperature logs, and an acoustic image log were obtained. By comparison to outcrops, the core has been initially interpreted as the Chilliwack group comprised of partially metamorphosed basaltic to andesitic volcanics. Core mapping reveals complex, steeply dipping networks of fractures and brecciation along slickensided strike slip faults; clay alteration is common in many of these structures. The majority of fractures are thoroughly healed by layers of chlorite and calcite; preservation of pyrite indicates anoxic conditions. The majority of fracture porosity resides in very dense fractures a few centimeters or less in length. The image log provides good insights into attitude of fractures that fully transect the core, but generally underestimates fracture density. The combination of complex, non-planar fracture zones containing many short fractures and healing promote misinterpretation of natural fracture attitude and density in the image log. The healing and anoxic minerals are consistent with the conductive temperature gradient measured in the well below a shallow isothermal zone, although, several fractures are open or only partially healed and resulted in fluid entries into the well. Here, the equilibrated measured temperature gradient of 64ºC/km and calculated heat flow of 145 mW/m2 is more than twice the regional average, indicating local influence of the Mt Baker magmatic system at the Little Park Creek TGH site.

Cascades↗
DOE OSTI2022

Analyses of the C. Winter #10 Enhanced Open-hole Drill Stem Test of the Residual Oil Zone in the Cypress Sandstone

The objective of this report is to detail enhanced open-hole drill stem test (DST) of the Residual Oil Zone in the Cypress Sandstone. DST are 1) to confirm there is no mobile oil from the suspected residual oil zone (ROZ), 2) estimate vertical and horizontal permeability in the ROZ, and 3) test vertical communication between the Cypress main pay zone (MPZ) and the ROZ, across the upper calcite layer.

02 PETROLEUM↗
DOE OSTI2023

Subsurface Characterization for Evaluating Geothermal Resource Potential from Existing Oil and Gas Wells in Tuttle, Oklahoma: Preprint

Oil and gas (O&G) wells often encounter co-produced hot water, possibly suitable for geothermal direct-use applications. The City of Tuttle is located on the eastern part of the Anadarko sedimentary basin in Oklahoma with high heat-in-place potential and recovery capability at depth. This study aims at demonstrating the potential of geothermal energy production for direct-use applications in two public schools and 250 nearby houses in Tuttle via repurposing existing O&G wells. In this scope, geochemistry, geology, and borehole log data were collected and incorporated into a 3D conceptual subsurface model. A digital elevation model (DEM) was used to represent the study area topography with four O&G wells. In addition, hydrogeochemical characteristics of the geothermal fluid and scaling potential were analyzed using ternary diagrams and chemical ratios to develop mixing models. The subsurface geology model indicated that the study area primarily consists of Permian to Mississippian Sandstone and Limestone formations, implying a porosity ranging between 12% and 22%, and a permeability up to 3.90E-14 m2 in certain reservoir levels. The reservoir temperature is expected to be ranging between 80 degrees C to 95 degrees C around 3 km depth with an average temperature gradient of 22.8 degrees C/km. Chemical geothermometers also estimated the reservoir temperature as 90 degrees C. Findings of the chemical model demonstrated that the geothermal fluid is Sodium-Potassium-Chloride-Sulfate type and possibly mixed with shallow groundwater resulting in higher Ca and Mg concentrations and lower Na/K ratio implying lower calcite scaling. These results comprehensively characterize the potential of geothermal resources in the study area and imply that geothermal energy production by repurposing existing O&G wells is suitable for low-temperature direct-use applications.

GEOTHERMAL ENERGY↗