SEARCH · Engineering Papers

Results for “binary alloys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS2003

Alloy Design Data Generated for B2-Ordered Compounds

Developing alloys based on ordered compounds is significantly more complicated than developing designs based on disordered materials. In ordered compounds, the major constituent elements reside on particular sublattices. Therefore, the addition of a ternary element to a binary-ordered compound is complicated by the manner in which the ternary addition is made (at the expense of which binary component). When ternary additions are substituted for the wrong constituent, the physical and mechanical properties usually degrade. In some cases the resulting degradation in properties can be quite severe. For example, adding alloying additions to NiAl in the wrong combination (i.e., alloying additions that prefer the Al sublattice but are added at the expense of Ni) will severely embrittle the alloy to the point that it can literally fall apart during processing on cooling from the molten state. Consequently, alloying additions that strongly prefer one sublattice over another should always be added at the expense of that component during alloy development. Elements that have a very weak preference for a sublattice can usually be safely added at the expense of either element and will accommodate any deviation from stoichiometry by filling in for the deficient component. Unfortunately, this type of information is not known beforehand for most ordered systems. Therefore, a computational survey study, using a recently developed quantum approximate method, was undertaken at the NASA Glenn Research Center to determine the preferred site occupancy of ternary alloying additions to 12 different B2-ordered compounds including NiAl, FeAl, CoAl, CoFe, CoHf, CoTi, FeTi, RuAl, RuSi, RuHf, RuTi, and RuZr. Some of these compounds are potential high temperature structural alloys; others are used in thin-film magnetic and other electronic applications. The results are summarized. The italicized elements represent the previous sum total alloying information known and verify the computational method used to establish the table. Details of the computational procedures used to determine the preferred site occupancy can be found in reference 2. As further substantiation of the validity of the technique, and its extension to even more complicated systems, it was applied to two simultaneous alloying additions in an ordered alloy.

Noebe, Ronald D.↗

DOE OSTI2021

Microstructure and properties of additively manufactured Al–Ce–Mg alloys

Additive manufacturing of aluminum alloys is largely dominated by a near-eutectic Al-Si compositions, which are highly weldable, but have mechanical properties that are not competitive with conventional wrought Al alloys. In addition, there is a need for new Al alloys with improved high temperature properties and thermal stability for applications in the automotive and aerospace fields. In this work, we considered laser powder bed fusion additive manufacturing of two alloys in the Al–Ce–Mg system, designed as near-eutectic (Al–11Ce–7Mg) and hyper-eutectic (Al–15Ce–9Mg) compositions with respect to the binary L → Al + Al 11 Ce eutectic reaction. The addition of magnesium is used to promote solid solution strengthening. A custom laser scan pattern was used to reduce the formation of keyhole porosity, which was caused by excessive vaporization due to the high vapor pressure of magnesium. The microstructure and tensile mechanical properties of the alloys were characterized in the as-fabricated condition and following hot isostatic pressing. The two alloys exhibit significant variations in solidification structure morphology. These variations in non-equilibrium solidification structure were rationalized using a combination of thermodynamic and thermal modeling. Both alloys showed higher yield strength than AM Al-10Si-Mg for temperatures up to 350 °C and better strength retention at elevated temperatures than additively manufactured Scalmaloy.

36 MATERIALS SCIENCE↗

NASA NTRS2007

Oxidation Kinetics of a NiPtTi High Temperature Shape Memory Alloy

A high temperature shape memory alloy (HTSMA), Ni30Pt50Ti, with an M(sub s) near 600 C, was isothermally oxidized in air for 100 hr over the temperature range of 500 to 900 C. Parabolic kinetics were confirmed by log-log and parabolic plots and showed no indication of fast transient oxidation. The overall behavior could be best described by the Arrhenius relationship: k(sub p) = 1.64 x 10(exp 12)[(-250 kJ/mole)/RT] mg(sup 2)/cm(sup 4)hr. This is about a factor of 4 reduction compared to values measured here for a binary Ni47Ti commercial SMA. The activation energy agreed with most literature values for TiO2 scale growth measured for elemental Ti and other NiTi alloys. Assuming uniform alloy depletion of a 20 mil (0.5 mm) dia. HTSMA wire, approx. 1 percent Ti reduction is predicted after 20,000 hr oxidation at 500 C, but becomes much more serious at higher temperatures.

Smialek, James L.↗

DOE OSTI2023

A Modified Embedded-Atom Method Potential for a Quaternary Fe-Cr-Si-Mo Solid Solution Alloy

Ferritic-martensitic steels, such as T91, are candidate materials for high-temperature applications, including superheaters, heat exchangers, and advanced nuclear reactors. Considering these alloys’ wide applications, an atomistic understanding of the underlying mechanisms responsible for their excellent mechano-chemical properties is crucial. Here, we developed a modified embedded-atom method (MEAM) potential for the Fe-Cr-Si-Mo quaternary alloy system—i.e., four major elements of T91—using a multi-objective optimization approach to fit thermomechanical properties reported using density functional theory (DFT) calculations and experimental measurements. Elastic constants calculated using the proposed potential for binary interactions agreed well with ab initio calculations. Furthermore, the computed thermal expansion and self-diffusion coefficients employing this potential are in good agreement with other studies. This potential will offer insightful atomistic knowledge to design alloys for use in harsh environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Two-stage formation-energy correction (NbZr, TaZr, VZr)

This bundle contains the scripts, the raw and corrected per-structure data, and the manuscript plots for the NbZr / TaZr / VZr BCC binary formation energies and the associated RMSDs. Why a two-stage correction is necessary: The "raw" formation energy of every relaxed VASP configuration is computed in the usual way, FE_raw(c) = E_alloy(c) - sum_i x_i * E_pure_i , where E_pure_i are the per-atom total energies of the pure-element reference structures (Nb, Ta, V, Zr in the same BCC supercell, with identical INCAR / KPOINTS / PAW choices). With perfectly consistent reference runs the raw FE should vanish at the two pure-element endpoints (x = 0 and x = 1) by construction. In practice this does not hold for two reasons that are present in our dataset: 1. Reference-energy inconsistency (composition-dependent bias). Even with identical input parameters, the pure-element runs (stored in `corrected_DFT_pure_element_runs/`) differ slightly from the values that would be implied by the alloy runs at near-pure compositions (a few meV/atom). This bias is approximately linear in concentration, because the residual error in E_pure_Nb (or E_pure_Ta / E_pure_V) propagates into FE_raw(c) as (1 - x) * dE_pure_1, and the corresponding error in E_pure_Zr propagates as x * dE_pure_2. Left uncorrected, this produces a non-physical "tilt" of FE_raw(x) and shifts the entire FE-vs-x cloud away from zero at the endpoints. 2. Endpoint anchoring against the audited true endpoints. The strict endpoint values (FE_x0_meVatom, FE_x1_meVatom in `corrected_fe_strict_endpoints_20260518/strict_endpoint_check_20260518.csv`) were re-derived from an independent cross-check of the pure-element runs. After stage 1 removes the linear bias, the near-pure compositions in the alloy dataset still extrapolate to values that differ slightly from these audited endpoints — because stage 1 is fit from a few near-end alloy bins, not from the audited pure-element references themselves. The README.txt file discusses how these issues are addressed by the two-stage correction, and describes folder layout, pipeline summary, and how to re-run.

36 MATERIALS SCIENCE↗

NASA NTRS1993

Application of hard coatings to substrates at low temperatures

BIRL, the industrial research laboratory of Northwestern University, has conducted unique and innovative research, under sponsorship from the NASA Marshall Space Flight Center (MSFC), in the application of hard, wear resistant coatings to bearing steels using the high-rate reactive sputtering (HRRS) process that was pioneered by Dr. William Sproul, the principal investigator on this program. Prior to this program, Dr. Sproul had demonstrated that it is possible to apply hard coatings such as titanium nitride (TiN) to alloy steels at low temperatures via the HRRS process without changing the metallurgical properties of the steel. The NASA MSFC program at BIRL had the specific objectives to: apply TiN to 440C stainless steel without changing the metallurgical properties of the steel; prepare rolling contact fatigue (RCF) test samples coated with binary hard coatings of TiN, zirconium nitride (ZrN), hafnium nitride (HfN), chromium nitride (CrN), and molybdenum nitride (MoN), and metal coatings of copper (Cu) and gold (Au); and develop new alloyed hard coatings of titanium aluminum nitride (Ti(0.5)Al(0.5)N), titanium zirconium nitride (Ti(0.5)Zr(0.5)N), and titanium aluminum vanadium nitride.

Sproul, William D.↗

DOE OSTI2022

Revisit the VEC criterion in high entropy alloys (HEAs) with high-throughput ab initio calculations: A case study with Al-Co-Cr-Fe-Ni system

Valence electron concentration (VEC) was treated as a useful parameter to predict the stability of solid solution phases. However, the available experimental data to support this criterion is far from enough. In the current study, the high-throughput ab initio modeling is applied to investigate the relative stability of FCC and BCC single crystals of the Al-Co-Cr-Fe-Ni high entropy alloys (HEAs) by using the special quasi-random structure (SQS) approach. Furthermore, the predictions start with pure elements of the Al-Co-Cr-Fe-Ni system and are continued with binaries, ternaries, and quaternary compositions, which come up with 180 compositions (360 structures). After that, the reliability of the VEC criterion is testified. The results show that the VEC criterion not only works for the stable structure but also works effectively for metastable structure when both FCC and BCC are not thermodynamic stable. However, it is found that the old VEC criterion proposed by Guo et al. fails to work effectively for compositions containing high concentrations of light-weight metals such as Al at VEC<5. To solve this problem, the present work proposes a new VEC rule to define the stability of FCC and BCC structures at the ground state. With the implementation of the new VEC rule, the effectiveness of the VEC rule (EVEC) of both FCC and BCC structures is enhanced, especially for pure elements and binary compositions, indicating that this rule does not only work effectively for multicomponent systems but also works for low-order systems.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Thermodynamic Modeling of the Al-Ce-Cu-Mg-Si System and Its Application to Aluminum-Cerium Alloy Design

Recently discovered AlCe alloys have shown promise in a number of applications, but the propensity of Ce to react with Al and other alloying elements can complicate the phase equilibria and design approach. To solve this, the CALPHAD method is used to explore an alloy within the quinary Al-Ce-Cu-Mg-Si system by developing a thermodynamic database with self-consistent parameters. The database includes a description of all 10 binary systems and 8 ternary systems consisting of: (i) 6 Al-containing ternaries (Al-Ce-Cu, Al-Ce-Mg, Al-Ce-Si, Al-Cu-Mg, Al-Cu-Si and Al-Mg-Si); and (ii) 2 additional ternaries that include Mg and Si (i.e., Ce-Mg-Si and Cu-Mg-Si). The thermodynamic description for the Al-Ce-Mg and Al-Mg-Si systems were reassessed to ensure consistency with the binary systems and the Ce-Mg-Si system is presented for the first time and compared to theoretical data from DFT (Density Functional Theory). In addition to the ternary interactions, the quaternary compound Al3Cu2Mg9Si7 and solid solution extending from the ternary Al2CuMg phase (Al,Si)2CuMg are incorporated. The CALPHAD method is employed and leveraged through the use of a Materials Design Simulator (MDS) to accelerate the design of novel aluminum-cerium-based alloys. The combination of a CALPHAD-based framework with experimental efforts and industrial insight permits the development of three new Al-Ce alloys: Al-3.5Ce-0.4Mg-7Si (Ce-modified A356), Al-5Ce-1Cu-0.5Mg-10Si and Al-19Ce-0.9Mg-1.1Si.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Structure and Behavior of the Ni End-Member Schreibersite Ni 3 P under Compression to 50 GPa

To better understand the potential presence of light element alloys of Fe and Ni in the Earth’s interior, the crystal structure and compressional behavior of the Ni-P binary compound, schreibersite (Ni 3 P), have been investigated using synchrotron X-ray diffraction experiments. Both powder and two single-crystal samples of synthetic Ni 3 P (in different orientations with respect to the loading axis of the diamond anvil cell) were compressed up to approximately 50 GPa at ambient temperature. The compressional data obtained for Ni3P were fitted with a 3rd order Birch–Murnaghan equation of state. All data indicated that the c/a ratio of unit cell parameters remained approximately constant up to about 30 GPa but then increased progressively with pressure, exhibiting a second slight discontinuity at approximately 40 GPa. The changes in unit cell parameters at ~30 GPa and ~40 GPa suggested discontinuous changes in magnetic ordering. Moreover, the threshold of these subtle discontinuities is sensitive to the stress state and orientation of the crystal in the diamond anvil cell. This study is the first report on the compressional behavior of both powder and single-crystal schreibersite at high-pressure (up to 50 GPa). It offers insights into the effects of Ni 3 P components on the compressional behavior of the Earth’s core.

36 MATERIALS SCIENCE↗

NASA NTRS1973

Vapor phase growth of group 3, 4, and 5 compounds by HCl transport of elements

Technique has been devised for vapor-phase epitaxial growth of group 3, 4, and 5 binary, ternary, or quaternary compounds by HCl transport of the constituent elements or dopants. Technique uses all the constituents of the alloy system in their elemental form. Transport of these elements by an HCl + H2 carrier gas facilitates their transport as subchlorides.

Tyagi, R. C.↗

NASA NTRS1992

Microstructural development during directional solidification of peritectic alloys

Despite the widespread commercial use of peritectic alloys (e.g., steels, brass, bronze, intermetallic compounds, Co based superalloys and A3B type superconductors), the characterization of the microstructural development during directional solidification of peritectics has historically lagged behind similar efforts directed towards other types of binary invariant reactions such as eutectic or monotectic. A wide variety of possible microstructures has been shown to form in peritectics depending upon the imposed temperature gradient, G, the solidification velocity, V, as well as the presence or absence of convection in the melt. This has important technological implications since many commercially important alloys exhibit peritectics and processing methods such as casting and welding often involve widely changing conditions. It has been the aim of this project to examine, in a systematic fashion, both experimentally and theoretically, the influence of gravitationally driven convection on segregation and microstructural development during solidification in peritectic systems under terrestrial conditions. The scientific results of the project will be used to establish ground based data in support of a meaningful microgravity flight experiment.

Lograsso, Thomas A.↗

DOE OSTI2025

Relative phase stability of L1 2 and DO 22 /DO 23 structures in Al 3 Nb, Al 3 Zr and Al 3 V compounds

The relative stability of the different tri-aluminide (Al 3 M) phases in three binary systems (M = Zr, Nb and V) was assessed for their potential to form fine cubic L1 2 precipitates in additively manufactured alloys. Supersaturated thin films of Al-(8–30) at% M were sputtered and heat treated during in-situ x-ray diffraction (XRD) measurements to observe the temperature ranges of stability for each phase. As-sputtered films were then processed with laser tracks simulating additive manufacturing solidification conditions, and the formation of phases in the laser tracks was correlated with density functional theory (DFT) and nucleation rate calculations. We found that the metastable L1 2 structure is highly competitive with the stable DO 23 structure in the Al-Zr system, but much less stable than the DO 22 structure in the Al-Nb system, and both the DO 22 and Al 8 V 5 structure in the Al-V system. Furthermore, these experimental results were found to be in good agreement with the DFT and kinetic calculations, as we determined that the metastable L1 2 in Al-Zr only requires a small amount of undercooling to favor its nucleation over the stable DO 23 , suggesting additive manufacturing can be a viable pathway to develop Al-Zr alloys strengthened by a high volume fraction of L1 2 Al 3 Zr phase.

Perrin, Alice E. [Oak Ridge National Laboratory (O↗

DOE OSTI2024

Effect of Si impurities on microstructure and tensile properties of a cast Al-Mg-Fe alloy

Al-Mg alloys are attractive for structural castings owing to their superior strength and ductility in the as-cast state. However, given the tight tolerance for impurities, Al-Mg alloys produced from secondary sources still face multiple challenges. Here, we report the effect of increased Si impurity (0.05–1.6 wt%), which is commonly found in secondary Al sources, on microstructure and tensile properties of a cast Al-4.3Mg-1.6Fe (wt%) alloy, commercially referred to as Castaduct-42 alloy. Microstructural characterization revealed that Si addition increased the volume fraction, size, and aspect ratio of primary Al13Fe4 intermetallic particles as well as the volume fraction of other binary and ternary eutectic phases. Tensile testing results demonstrated that increasing Si impurities from 0.05 to 1.6 wt% reduced ductility from 14.3 ± 1.4 % to 2.2 ± 1.0 %. A particle cracking damage accumulation model coupled with failure analysis indicated primary Al13Fe4 intermetallic particles to be the major contributing factor to the deterioration in ductility with increasing Si content. Additionally, the stabilizing effect of Si on primary Al 13 Fe 4 was inconsistent with the CALPHAD calculation results based on existing CALPHAD databases which predict a slightly decreasing primary Al13Fe4 phase fraction with increasing Si concentration. This work provides new insights into the phase stability and mechanical behavior of the lesser studied Al-Mg-Fe-Si alloy system that will contribute to the development of sustainable cast Al-Mg based alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Regulating crystallization to maintain balanced carrier mobility via ternary strategy in blade-coated flexible organic solar cells

Regulating the crystallization of donor and acceptor to maintain balanced carrier mobility is of great importance to fabricate efficient organic solar cells (OSCs). Herein, the balanced crystallinity between donor and acceptor was finely controlled in blade-coated OSCs. By adding high crystalline FOIC into PBDB-T:ITIC system, a balanced carrier mobility was achieved, resulting in the much improved fill factor. The optimized ternary device exhibits an increased current density, due to the enhanced light-harvesting efficiency with complementary absorption and the morphology change. Morphology characterization demonstrated that the ternary film exhibits a highly balanced crystallinity between the donor and acceptor on account of the formation of acceptor alloy. Moreover, the ternary film not only possesses a small domain size, but also exhibits a high domain purity as compared to both binary films. Encouragingly, a highest power conversion efficiency (PCE) of 10.68% was obtained for the blade-coated ternary OSCs. In addition, the blade-coated flexible large-area (105 mm 2 ) OSC based on PBDB-T:ITIC:FOIC ternary system also exhibits a high PCE of 9.81%, showing great potential in the high-throughput fabrication of OSCs.

14 SOLAR ENERGY↗

DOE OSTI2022

Hot Hydride Superconductivity Above 550 K

The search for room temperature superconductivity has accelerated in the last few years driven by experimentally accessible theoretical predictions that indicated alloying dense hydrogen with other elements could produce conventional superconductivity at high temperatures and pressures. These predictions helped inform the synthesis of simple binary hydrides that culminated in the discovery of the superhydride LaH 10 with a superconducting transition temperature T c of 260 K at 180 GPa. We have now successfully synthesized a metallic La-based superhydride with an initial T c of 294 K. When subjected to subsequent thermal excursions that promoted a chemical reaction to a higher order system, the Tc onset was driven irreversibly to 556 K. X-ray characterization confirmed the formation of a distorted LaH 10 based backbone that suggests the formation of ternary or quaternary compounds with substitution at the La and/or H sites. The results provide evidence for hot superconductivity, aligning with recent predictions for higher order hydrides under pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1985

Turbine airfoil deposition models and their hot corrosion implications

This research project deals with the prediction of single- and multi-component salt(-solution) deposition, flow and oxide dissolution and their effects on the lifetime of turbine blades. Goals include rationalizing and helping to predict corrosion patterns on operational gas turbine (GT) rotor blades and stator vanes, and ultimately providing some of the tools required to design laboratory simulators and future corrosion resistant high-performance engines. Necessary background developments are reviewed. Results and tentative conclusions for single species (Na sub 2 SO sub 4 (1)) condensation, binary salt-solution (Na sub 2 SO sub 4-K sub 2 SO sub 4) condensation, and burner-rig testing of alloy materials are outlined.

Rosner, D. E.↗

NASA NTRS1986

Crystallization microstructure in transparent monotectic alloys

The surprising funguslike morphology which occurs at the liquid(1)/liquid(2)/solid triple junction in directionally solidifying miscibility gap systems at the monotectic temperature is described. The monotectic temperature in a binary mixture is the one at which two immiscible solutions of the same two components form phases in equilibrium with the solid phase of one of the components. The growth of this morphology is described, and a similarity between it and that of a known crystal growth morphology is pointed out.

Kaukler, W. F.↗

NASA NTRS1996

Microalloying Improves the Low-Cycle Fatigue Behavior of Powder-Extruded NiAl

There is considerable interest in developing new structural materials in which high use temperatures and strength, coupled with low density, are the minimum requirements. The goal for these new materials is to provide operation well beyond the working range of conventional superalloys. Of the many intermetallics under consideration, NiAl is one of the few systems that has emerged as a promising candidate for further development. This is because of a number of property advantages--including low density, high melting temperature, high thermal conductivity, and excellent environmental resistance. However, binary NiAl lacks strength and creep resistance at elevated temperatures. Also, its poor high-temperature strength results in worse-than-predicted low-cycle fatigue (LCF) lives at low strain ranges at 727 C (1341 F) because of accelerated creep damage mechanisms that result in significant intergranular cracking. One approach for improving these properties involves microalloying NiAl with either Zr or N. As an integral part of this alloy-development program at the NASA Lewis Research Center, the low-cycle fatigue behavior of Zr- and N-doped nickel aluminides produced by extrusion of prealloyed powders was investigated and compared with similarly processed binary NiAl.

Source record↗