Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “base effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Simulation of mineral dissolution at the pore scale with evolving fluid-solid interfaces: review of approaches and benchmark problem set

This manuscript presents a benchmark problem for the simulation of single-phase flow, reactive transport, and solid geometry evolution at the pore scale. The problem is organized in three parts that focus on specific aspects: flow and reactive transport (part I), dissolution-driven geometry evolution in two dimensions (part II), and an experimental validation of three-dimensional dissolution-driven geometry evolution (part III). Five codes are used to obtain the solution to this benchmark problem, including Chombo-Crunch, OpenFOAM-DBS, a lattice Boltzman code, Vortex, and dissolFoam. These codes cover a good portion of the wide range of approaches typically employed for solving pore-scale problems in the literature, including discretization methods, characterization of the fluid-solid interfaces, and methods to move these interfaces as a result of fluid-solid reactions. A short review of these approaches is given in relation to selected published studies. Results from the simulations performed by the five codes show remarkable agreement both quantitatively--based on upscaled parameters such as surface area, solid volume, and effective reaction rate--and qualitatively--based on comparisons of shape evolution. This outcome is especially notable given the disparity of approaches used by the codes. Therefore, these results establish a strong benchmark for the validation and testing of pore-scale codes developed for the simulation of flow and reactive transport with evolving geometries. They also underscore the significant advances seen in the last decade in tools and approaches for simulating this type of problem.

58 GEOSCIENCES↗
DOE OSTI2025

Advances in Carbon Electrode Integration for Stable and Efficient Perovskite Solar Cells and Modules

Carbon-electrode-based perovskite solar cells (C-PSCs) have emerged as a cost-effective and scalable alternative to noble-metal-based PSCs, addressing critical challenges related to device stability, fabrication complexity, and commercialization potential. This review explores the recent progress in C-PSC development, focusing on the benefits of carbon electrodes (CEs), including their hydrophobicity, chemical inertness to halide corrosion, and compatibility with low-temperature cost-effective solution-based deposition methods. Despite relatively lower power conversion efficiencies (PCEs) than their metal (e.g., Au/Ag) counterparts, recent advances in carbon paste formulation, interfacial contact engineering, and work function modification have elevated C-PSC efficiencies above 22%. This review further examines strategies to enhance electrode conductivity, interfacial properties, and charge selectivity to further increase C-PSC performance. Progress in carbon-electrode-based perovskite solar modules (C-PSMs), particularly within mesoporous and planar architectures, is also analyzed, revealing significant developments in active area scaling and long-term stability. Notably, the limited research in inverted (PIN) C-PSCs is also highlighted as a compelling opportunity for innovation, given the architecture's inherent advantages in flexibility, tandem integration, and low-temperature processing. Collectively, these insights affirm the potential of C-PSCs and C-PSMs to deliver affordable, stable, and high-performance photovoltaics suitable for scalable deployment.

Carbon Electrodes↗
DOE OSTI2023

Metal Complex Molecular Solids Showing Band-like Transport Driven by In Situ Ligand Exchange

Transition-metal complexes exhibit excellent charge transport properties in solid films, rendering them promising for application in modern electronics. Although the charge transport mechanism of metal complex solids with multiple redox states is considered to be governed by self-exchange hole hopping, the effect of additives, such as Lewis bases, has not been identified. Herein, we describe the effect of 4- tert -butylpyridine (TBP) on the charge transport mechanism and film properties of [Cu(dmbpy) 2 ] 2 + / + (dmbpy = 6,6'-dimethyl-2,2'-bipyridine)-based molecular solids. The formation of [Cu(TBP) 4 ] 2 + , excess TBP, and free dmbpy from the ligand-exchange reaction between [Cu(dmbpy) 2 ] 2 + and TBP increases the film conductivity and changes the transport mechanism from hopping to band-like transport through a combination of chemical composition, film morphology, and crystallographic changes. In conclusion, these findings advance our understanding of the fundamental properties of molecular metal complex solids and enable optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Transparent MgO for Back-Contact Passivation of CdTe-Based Solar Cells

The passivating effects of MgO have been studied by integrating into an existing superstrate CdTe thin film solar cell device architecture. When implemented as an emitter to replace the typical MZO, the device performance was below par, but improved PL and TRPL was detected with significant carrier lifetimes in comparison to the MZO devices. However, when integrated at the back, the PL signal was detected upon the illumination of excitation laser from the back. This has opened the possibility of probing the back of the CdTe thin film solar cells with transparent back contact with improved back passivation and a bifacial device structure. Further, the TRPL measurements suggests that the MgO shows passivating effects to a CdTe surface irrespective of method of deposition implemented.

bifacial↗
DOE OSTI2022

Near‐Cloud Aerosol Retrieval Using Machine Learning Techniques, and Implied Direct Radiative Effects

Abstract There is a lack of satellite‐based aerosol retrievals in the vicinity of low‐topped clouds, mainly because reflectance from aerosols is overwhelmed by three‐dimensional cloud radiative effects. To account for cloud radiative effects on reflectance observations, we develop a Convolutional Neural Network and retrieve aerosol optical depth (AOD) with 100–500 m horizontal resolution for all cloud‐free regions regardless of their distances to clouds. The retrieval uncertainty is 0.01 + 5%AOD, and the mean bias is approximately −2%. In an application to satellite observations, aerosol hygroscopic growth due to humidification near clouds enhances AOD by 100% in regions within 1 km of cloud edges. The humidification effect leads to an overall 55% increase in the clear‐sky aerosol direct radiative effect. Although this increase is based on a case study, it highlights the importance of aerosol retrievals in near‐cloud regions, and the need to incorporate the humidification effect in radiative forcing estimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Climate Base State Influences on South Asian Monsoon Processes Derived From Analyses of E3SMv2 and CESM2

Abstract The effects of differences in climate base state are related to processes associated with the present‐day South Asian monsoon simulations in the Energy Exascale Earth System Model version 2 (E3SMv2) and the Community Earth System Model version 2 (CESM2). Though tropical Pacific and Indian Ocean base state sea surface temperatures (SSTs) are over 1°C cooler in E3SMv2 compared to CESM2, and there is an overall reduction of Indian sector precipitation, the pattern of South Asian monsoon precipitation is similar in the two models. Monsoon‐ENSO teleconnections, dynamically linked by the large‐scale east‐west atmospheric circulation, are reduced in E3SMv2 compared to CESM2. In E3SMv2, this is related to cooler tropical SSTs and ENSO amplitude that is less than half that in CESM2. Comparison to a tropical Pacific pacemaker experiment shows, to a first order, that the base state SSTs and ENSO amplitude contribute roughly equally to lower amplitude monsoon‐ENSO teleconnections in E3SMv2.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

In situ effective pumping speed measurements as a tool for non-evaporable getter activation and saturation monitoring

We have developed method of in situ effective pumping speed measurements based on injecting finite gas pulse into a vacuum volume and subsequent recording of pressure response using a Residual Gas Analyzer (RGA). The pressure burst caused by injected gas pulse falls exponentially in time and the exponential coefficient of such pressure decay is proportional to total effective pumping speed of all vacuum pumps acting on vacuum chamber volume. The effective pumping speed can be extracted from the dependence of injected gas species pressure vs time recorded by an RGA. Non-Evaporable Getters (NEGs) are widely used in multiple ultra and extremely high vacuum devices and applications during the last several decades. Areas of NEG applications were recently expanded into vacuum devices with relatively high-pressure levels (up to 10 -7 Torr) by the invention of high capacity ZAO NEG which can be operated at elevated temperatures. The intrinsic property of all NEG-based vacuum pumps is the reduction of their pumping speed, called “NEG saturation”, after an extended period of operation. Typical time interval for such process can span from about a month and up to a few years depending on NEG type, vacuum level of NEG pump operation, and residual gas content. After that, the NEG pump will require a re-activation cycle to restore its pumping speed close to the initial value. For many applications it is difficult to realize what is the current pumping speed of NEG pump is and when the pump should be re-activated. A method for in situ effective pumping speed measurements developed in this study can be used as a tool for NEG-based pump activation and saturation monitoring. Application of such an approach to monitor pumping status of NEG pumps was utilized and will be continually used at Extended EBIS which was recently developed and commissioned for Relativistic Heavy Ion Collider (RHIC) and future Electron Ion Collider (EIC). The results obtained during commissioning are presented and discussed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Molecular dynamics study on the interfacial properties of mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders on graphene and graphite surfaces

This study investigates the behavior of two different mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders, polyvinylpyrrolidone:polyvinylidene difluoride (PVP:PVDF) and polyvinylpyrrolidone:polyacrylic acid (PVP:PAA), at graphene and graphite interfaces using classical molecular dynamics simulations. The aim is to identify the best performing monomer binder blend and carbon-based material for the design of battery-optimized energy devices. The PVP:PAA monomer binder blend and graphite are found to have the best interaction energies, densification upon adsorption, and more ordered structure. The adsorption of both monomer binder blends is strongly guided by the higher affinity of PVP and PAA monomeric molecules for the surfaces compared to PVDF. The structure of adsorbed layers of PVP:PVDF monomer binder blend on graphene and graphite develops more quickly than PVP:PAA, indicating faster kinetics. This study complements a previous density functional theory study recently reported by our group and contributes to a better understanding of the nanoscopic features of relevant interfacial regions involving mixtures of monomers of PVP-based battery binders and different carbon-based materials. In conclusion, the effect of a blend of commonly used monomer binders on carbon-based materials is essential for obtaining tightly bound anode and cathode active materials in lithium-ion batteries, which is crucial for designing battery-optimized energy devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Inhibition of FOXP3 by stapled alpha-helical peptides dampens regulatory T cell function

Despite continuing advances in the development of novel cellular-, antibody-, and chemotherapeutic-based strategies to enhance immune reactivity, the presence of regulatory T cells (Treg cells) remains a complicating factor for their clinical efficacy. To overcome dosing limitations and off-target effects from antibody-based Treg cell deletional strategies or small molecule drugging, we investigated the ability of hydrocarbon stapled alpha-helical (SAH) peptides to target FOXP3, the master transcription factor regulator of Treg cell development, maintenance, and suppressive function. Using the crystal structure of the FOXP3 homodimer as a guide, we developed SAHs in the likeness of a portion of the native FOXP3 antiparallel coiled-coil homodimerization domain (SAH-FOXP3) to block this key FOXP3 protein-protein interaction (PPI) through molecular mimicry. We describe the design, synthesis, and biochemical evaluation of single- and double-stapled SAHs covering the entire coiled-coil expanse. We show that lead SAH-FOXP3s bind FOXP3, are cell permeable and nontoxic to T cells, induce dose-dependent transcript and protein level alterations of FOXP3 target genes, impede Treg cell function, and lead to Treg cell gene expression changes in vivo consistent with FOXP3 dysfunction. These results demonstrate a proof of concept for rationally designed FOXP3-directed peptide therapeutics that could be used as approaches to amplify endogenous immune responsiveness.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Science–based maize stover removal can be sustainable

Maize (Zea mays L.) stover can be harvested for multiple uses or left in the field to sustain soil organic carbon (SOC), cycle essential plant nutrients, and protect soil health. This 13-yr field study quantified effects of no (0 Mg ha –1 yr –1 ), low (1.0–1.4 Mg ha –1 yr –1 ), moderate (3.5–4.0 Mg ha –1 yr –1 ), or high rates (4.7–5.4 Mg ha –1 yr –1 ) of stover harvest from either continuous maize or maize–soybean [Glycine max (L.) Merr.] rotation on grain yield, plant nutrient concentrations, and multiple soil properties at two sites in Iowa. Stover harvest increased plant macro- and micro-nutrient removal, but did not affect average grain yields of either crops. Soil inorganic carbon (IC), SOC, bulk density, pH, and cation exchange capacity (CEC) showed no significant differences due to stover harvest. Plant tissue and soil-test nutrient concentration effects were also minor and site-specific. Stover harvest significantly (p < .05) decreased exchangeable K and Ca concentrations by 8.3–23.8% and 0.3–22.5% but overall soil health indicator effects were minimal. Overall, based on crop yields, plant nutrient and soil-test concentrations, soil health indicators, and carbon sequestration estimates, maize stover harvest can be sustainable provided: (a) grain yields consistently exceed 11 Mg ha –1 , (b) stover removal does not exceed 40% of the aboveground biomass (i.e., 3.5–4.0 Mg ha –1 yr –1 ), and (c) plant nutrients (especially K) are closely monitored.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Effect of Aluminum Oxide on the Performance of Ionic Liquid-Based Aluminum–Air Battery

The aluminum–air (or oxygen) battery has received intense attention in the past because of its excellent benefits such as low cost and high energy density, but due to the challenging issues such as hydrogen evolution and inactive oxide film formation on the Al surface, it could not be fully applied. In this study, 1-Ethyl 3-Methyl Imidazolium Chloride ([EmIm]Cl) and aluminum chloride (AlCl3) are applied to resolve the aforementioned issues. Ex situ component-level and in situ cell-level open circuit voltage (OCV) tests combined with the physics-based model analyses were conducted to investigate the electrochemical reaction behaviors of the Al–air cell. Especially, the effect of aluminum oxide formation on the anode- and cathode-side reactions were analyzed in detail. The oxide film formed at the Al surface strongly was found to significantly impede the electrochemical reaction at the surface, and the film growth was controlled by decreasing the surface tension by aggressive anions. In the cathode side, the aluminum oxide precipitated in the porous cathode electrode was found to decrease the porous reaction area and block reactant access into the reaction sites. The effects of O2 solubility in the electrolyte, initial porosity and thickness of the porous electrode are compared in detailed, and optimal thickness is suggested.

25 ENERGY STORAGE↗
DOE OSTI2024

An efficient construction of nano-interfaces for excellent coking tolerance of cermet anodes

Solid oxide fuel cells (SOFCs) are promising energy conversion devices for the effective and convenient utilization of hydrocarbons (for example, methane) to electricity. However, the development of direct methane SOFCs is primarily hindered by the poor coking tolerance of the state-of-the-art Ni-based cermet anodes. Herein, we efficiently construct nano-interfaces in the anode by infiltrating a Ni 0.6 Y 0.064 Zr 0.336 O 2-δ (NYZ) catalyst onto the traditional Ni-based cermet anode to effectively enhance the coking tolerance. After being reduced in H 2 , Ni and Y 0.16 Zr 0.84 O 2-δ (YSZ) nanoparticles (NPs) are in situ formed on the surface of the Ni-YSZ substrate. The roughened anode demonstrates significantly improved fuel oxidation activity and coking tolerance, due likely to the formation of nano-interfaces. Specifically, when applied in the Ni-YSZ-based anode-supported SOFCs, a high peak power density of 1.785 W cm –2 and a stable operation of ~ 240 h with no observable degradation is achieved at 750 °C in nearly dry methane (3% H 2 O). Finally, a density functional theory study suggests that the excellent coking tolerance is attributed to the formation of OH species on Ni/YSZ nano-interfaces, which would further interact with intermediate carbon species to generate COH intermediates.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Revisiting Lebedev’s one-century old experiment

One hundred years ago, world-famous scientist A. A. Lebedev performed a set of classical measurements on annealed optic crown glasses. He found that these glasses exhibited characteristic endothermic effects in a particular temperature range. To explain these phenomena, Lebedev proposed a hypothesis that the glasses contain tiny quartz crystals. This initial hypothesis was quickly disapproved, and the origin of the endothermic effect of glasses remains an unsolved puzzle. This work uses recently proposed nanoflake model of silica glass structure to explain the endothermic effect of various glasses. The new model differs from the popular continuous random network theory in that it emphasizes the medium-range ordering structure of glasses. According to the nanoflake based theory, the endothermic effect of glasses is caused by the transition from ordered one-dimensional structures into disordered structure in glasses. The new theory also predicts that the temperature range of the endothermic effect is dependent on both glass composition and cooling rates during glass formation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of momentum-dependent quasiparticle renormalization on the gap structure of iron-based superconductors

We discuss the influence of momentum-dependent correlations on the superconducting gap structure in iron-based superconductors. Within the weak coupling approach including self-energy effects at the one-loop spin-fluctuation level, we construct a dimensionless pairing strength functional which includes the effects of quasiparticle renormalization. The stationary solution of this equation determines the gap function at Tc. The resulting equations represent the simplest generalization of spin fluctuation pairing theory to include the effects of an anisotropic quasiparticle weight. We obtain good agreement with experimentally observed anisotropic gap structures in LiFeAs, indicating that the inclusion of quasiparticle renormalization effects in the existing weak-coupling theories can account for the observed anomalies in the gap structure of Fe-based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Medium-Range Structural Order as the Driver of Activated Dynamics and Complexity Reduction in Glass-Forming Liquids

Here, we analyze in depth the Elastically Collective Nonlinear Langevin Equation theory of activated dynamics in metastable liquids to establish that the predicted inter-relationships between the alpha relaxation time, local cage and collective elastic barriers, dynamic localization length, and shear modulus are causally related within the theory to the medium range order (MRO) static correlation length. The latter grows exponentially with density for metastable hard sphere fluids and as a nonuniversal inverse power law with temperature for supercooled liquids under isobaric conditions. The physical origin of predicted connections between the alpha time and other metrics of cage order and the thermodynamic inverse dimensionless compressibility is fully established. It is discovered that although kinetic constraints from the real space first coordination shell are important for the alpha time, they are of secondary importance compared to the consequences of the more universal MRO correlations in both the modestly and deeply metastable regimes. This understanding sheds new light on the theoretical basis for, and prior successes of, the predictive mapping of chemically complex thermal liquids to effective hard sphere fluids based on matching their dimensionless compressibilities, a scheme we call “complexity reduction”. In essence, the latter is equivalent to the physical requirement that the thermal liquid MRO correlation equals that of its effective hard sphere analog. The mapping alone is shown to provide a remarkable level of quantitative predictive power for the glass transition temperature T g of 21 molecular and polymer liquids. Predictions for the chemically specific absolute magnitude and growth with cooling of the MRO correlation length are obtained and lie in the window of 2–6 nm at T g . Dynamic heterogeneity, elastic facilitation, and beyond pair structure issues are briefly discussed. Future opportunities to theoretically analyze the equilibrated deep glass regime are outlined.

cancer↗
DOE OSTI2024

Large Language Models for the Creation and Use of Semantic Ontologies in Buildings: Requirements and Challenges

Semantic ontologies offer a formalized, machine-readable framework for representing knowledge, enabling the structured description of complex systems. In the building domain, the adoption of ontologies like the Brick schema has transformed how buildings and their systems are modeled by providing a standardized, interoperable language. However, the complexity and the steep learning curve involved in developing and querying semantic models present substantial challenges, often requiring a workforce with specialized expertise. This paper builds on our experience in investigating how Large Language Models (LLMs) can help address these challenges, focusing on their role in constructing and querying of semantic models, particularly using the Brick Schema. Our study outlines the requirements and metrics for evaluating the scalability and effectiveness of LLM-based tools, while also discussing the current challenges and limitations in developing such tools. Ultimately, this paper aims to orient research efforts as various groups experiment with diverse techniques, while enabling more effective comparison of emerging solutions and fostering collaboration across the field.

Mulayim, Ozan Baris↗
DOE OSTI2025

Benchmarking Concentration and Extraction Methods for Wastewater-Based Surveillance of Eight Human Respiratory Viruses: Implications for Rapid Application to Novel Pathogens

To provide early warning and support a rapid response to a novel virus through wastewater surveillance, it would be ideal to understand in advance which concentration and extraction methods are likely to be effective for dPCR-based methods, depending on virus characteristics. In this study, we spiked raw wastewater samples with eight human respiratory viruses and processed them with four methods that concentrate and/or extract nucleic acids from both liquid and solid fractions (Promega, Nanotrap, and InnovaPrep) or only the solid fraction of wastewater (Solids). Our findings provide encouraging evidence that all four methods combined with dPCR could detect an emerging virus in wastewater, although they differed in sensitivity. The pattern of recovery efficiency for adenoviruses, coronaviruses, and influenza A viruses was consistent across methods, with Promega producing higher median recovery efficiencies, while distinct patterns were observed for coxsackieviruses. We also normalized the concentration data with two endogenous fecal indicators, PMMoV and Carjivirus (formerly crAssphage). We found that normalization could reduce method-associated differences if the indicator exhibited a recovery pattern similar to that of the target virus. These findings can guide the selection of concentration and extraction methods for wastewater monitoring based on the properties of target viruses, thus enhancing pandemic preparedness.

Biological and medical sciences↗
DOE OSTI2025

Physically constrained 3D diffusion for inverse design of fiber-reinforced polymer composite materials

Designing fiber-reinforced polymer composites (FRPCs) with a tailored nonlinear stress-strain response is crucial for applications such as energy absorption in crash structures, flexible robotics, and impact-resistant protective gear. However, the inherent complexities of composite materials and the multitude of parameters involved, render traditional design and optimization methods inadequate for achieving effective inverse design of composites. In this paper, we present an AI-based inverse design framework that effectively and efficiently generates FRPCs with targeted nonlinear stress-strain responses. We introduce a physically constrained diffusion model (PC3D_Diffusion) capable of managing the complexities of composite materials and producing detailed, high-quality designs. We propose a loss-guided, learning-free approach to generate physically feasible microstructure designs by explicitly enforcing physical constraints during the generation process. For training purposes, 1.35 million FRPC samples were created, and their corresponding stress-strain curves were computed using established physics-based computational models. The results show that PC3D_Diffusion consistently generates high-quality designs with tailored mechanical behaviors, while guaranteeing compliance with the physical constraints. PC3D_Diffusion advances FRPC inverse design and may facilitate the inverse design of other 3D materials, offering potential applications in industries reliant on materials with custom mechanical properties.

Xu, Pei [Clemson Univ., SC (United States)]↗