Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

The effects of fire on biogenic emissions of methane and nitric oxide from wetlands

Enhanced emissions of methane (CH4) and nitric oxide (NO) were measured following three controlled burns in a Florida wetlands in 1987 and 1988. Wetlands are the major global source of methane resulting from metabolic activity of methanogenic bacteria. Methanogens require carbon dioxide, acetate, or formate for their growth and the metabolic production of methane. All three water-soluble compounds are produced in large concentrations during biomass burning. Postfire methane emissions exceeded 0.15 g CH 4/sq m per day. Preburn and postburn measurements of soil nutrients indicate significant postburn increases in soil ammonium, from 8.35 to 13.49 parts per million (ppm) in the upper 5 cm of the Juncus marsh and from 8.83 to 23.75 ppm in the upper 5 cm of the Spartina marsh. Soil nitrate concentrations were found to decrease in both marshes after the fire. These measurements indicate that the combustion products of biomass burning exert an important 'fertilizing' effect on the biosphere and on the biogenic production of environmentally significant atmospheric gases.

Levine, Joel S.↗

The fuelling of active galactic nuclei

Accretion mechanisms for powering the central engines of active galactic nuclei (AGN) and possible sources of fuel are reviewed. It is a argued that the interstellar matter in the main body of the host galaxy is channeled toward the center, and the problem of angular momentum transport is addressed. Thin accretion disks are not a viable means of delivering fuel to luminous AGN on scales much larger than a parsec because of the long inflow time and effects of self-gravity. There are also serious obstacles to maintaining and regulating geometrically thick, hot accretion flows. The role of nonaxisymmetric perturbations of the gravitational potential on galactic scales and their triggers is emphasized. A unified model is outlined for fueling AGN, in which the inflow on large scales is driven by gravitational torques, and on small scales forms a mildly self-gravitating disk of clouds with inflow driven by magnetic torques or cloud-cloud collisions.

Shlosman, Isaac↗

Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications

Under the Department of Energy's (DOE) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for terrestrial Solar Distributed Heat Receivers. The Stirling engine has been identified by Sandia as one of the most promising engines for terrestrial applications. The Stirling engine also has the potential to meet DOE's performance and cost goals. The NASA Lewis Research Center is conducting Stirling engine technology development activities directed toward a dynamic power source for space applications. Space power systems requirements include high reliability, very long life, low vibration and high efficiency. The free-piston Stirling engine has the potential for future high power space conversion systems, either nuclear or solar powered. Although both applications appear to be quite different, their requirements complement each other. Preliminary designs feature a free-piston Stirling engine, a liquid metal heat transport system, and a means to provide nominally 25 kW electric power to a utility grid while meeting DOE's performance and long term cost goals. The Cummins design incorporates a linear alternator to provide the electrical output, while the STC design generates electrical power indirectly through a hydraulic pump/motor coupled to an induction generator. Both designs for the ASCS's will use technology which can reasonably be expected to be available in the early 1990's.

Shaltens, Richard K.↗

Synchrotron emission from a cosmological jet as a model of gamma-ray bursts

The nonthermal rapidly varying spectra of gamma-ray bursts require relativistic beaming if the source is at a cosmological distance. Limits on the Lorentz factors and magnetic fields of extragalactic jet models of gamma-ray bursts are derived from the synchrotron source function, the position of the fundamental cyclotron resonance, the Thomson optical depth of radiating electrons, and the Thomson optical depth of electron-positron pairs created in photon-photon collisions of Compton upscattered radiation. The last of these constraints is the strongest, and it is satisfied by the observations if the jet's Lorentz factor is greater than 100. The limit from the position of the cyclotron fundamental requires a magnetic field strength below approximately 10 exp 10 G. Jet models producing observable cyclotron lines are allowed. The acceleration region in the burst must be separate from the emission region. The similarity of gamma-ray burst jet models to models of quasars and BL Lac objects suggest that if gamma-ray bursts are cosmological sources, they are a type of active galaxy.

Brainerd, J. J.↗

Bromoalkane production by Antarctic ice algae

Ice microalgae, collected from the underside of annual sea ice in McMurdo Sound, Antarctica, were found to contain and release to seawater a number of brominated hydrocarbons. These included bromoform, dibromomethane, mixed bromochloromethanes, and methyl bromide. Atmospheric measurements in the McMurdo Sound vicinity revealed the presence of bromoform and methyl bromide in the lower atmosphere, with lowest concentrations inland, further indicating that biogenic activity in the Sound is a source of organic bromine gases to the Antarctic atmosphere. This may have important implications for boundary layer chemistry in Antarctica. In the Arctic, the presence of bromoform has been linked to loss of surface ozone in the spring. We report here preliminary evidence for similar surface ozone loss at McMurdo Station.

Sturges, W. T.↗

Design considerations for a Space Station radiation shield for protection from both man-made and natural sources

This study was conducted to analyze scenarios involving the use of nuclear-power vehicles in the vicinity of a manned Space Station (SS) in low-earth-orbit (LEO) to quantify their radiological impact to the station crew. In limiting the radiant dose to crew members, mission planners may (1) shut the reactor down prior to reentry, (2) position the vehicle at a prescribed parking distance, and (3) deploy radiation shield about the shutdown reactor. The current report focuses on the third option in which point-kernel gamma-ray shielding calculations were performed for a variety of shield configurations for both nuclear electric propulsion (NEP) and nuclear thermal rocket (NTR) vehicles. For a returning NTR vehicle, calculations indicate that a 14.9 MT shield would be needed to limit the integrated crew exposure to no more than 0.05 Sv over a period of six months (25 percent of the allowable exposure to man-made radiation sources). During periods of low vehicular activity in LEO, the shield may be redeployed about the SS habitation module in order to decrease crew exposures to trapped proton radiations by approximately a factor of 10. The corresponding shield mass required for deployment at a returning NEP vehicle is 2.21 MT. Additional scenarios examined include the radioactivation of various metals as might be found in tools used in EVA activities.

Bolch, Wesley E.↗

High-energy gamma-ray observations of active galaxies

During the period from 1992 May to early 1992 November, the Energetic Gamma-Ray Experiment Telescope (EGRET) on board the Compton Gamma Ray Observatory obtained high-energy gamma-ray data for most of the sky. A total of 18 active galaxies have been seen with high certainty, and it is expected that more will be found in the data when a more thorough analysis is complete. All of those that have been seen are radio-loud quasars or BL Lacertae objects; most have already been identified as blazars. No Seyfert galaxies have been found thus far. If the spectra are represented as a power law in energy, spectral slopes ranging from approximately -1.7 to -2.4 are found. A wide range of z-values exits in the observed sample, eight having values in excess of 1.0. Time variations have been seen, with the timescale for a significant change being as short as days in at least one case. These results imply the existence of very large numbers of relativistic particles, probably close to the central object. Although a large extrapolation is required, their existence also suggests that these active galactic nuclei may be the source of the extragalactic cosmic rays.

Fichtel, Carl E.↗

Increase of carbonyl fluoride (COF2) in the stratosphere and its contribution to the 1992 budget of inorganic fluorine in the upper stratosphere

Volume mixing ratio profiles of COF2 have been derived through most of the stratosphere between 30 deg N and 54 deg S from series of 0.01-/cm resolution infrared solar spectra recorded in the occultation mode by the atmospheric trace molecule spectroscopy (ATMOS) instrument during the ATLAS 1 space shuttle mission of March-April 1992. When compared with similar results obtained from the ATMOS/Spacelab 3 mission of April-May 1985, the cumulative increase in the burden of COF2 in the middle and upper stratosphere was found to be 67% for that 7-year time interval. By combining a subset of these COF2 results with upper stratospheric concentrations of HF also derived from the ATMOS observations, it was further found that the budget of inorganic fluorine above 35 km altitude increased by (60 +/- 10)% over the 1985-1992 time interval, which corresponds to an average exponential rate of increase of (6.7 +/- 1/1)%/yr, or a linear rate of increase reference to 1985 of (8.5 +/- 1.3)%/yr at the 1 sigma confidence level. The total inorganic F atom volume mixing ratio found in the upper stratosphere for 1985 and 1992 and the increase during this perid mirror the rise in man-made fluorine-bearing compounds at the ground during the early to mid 1980s. This demonstrates the negligible impact of natural sources of fluorine, in particular volcanic activity, on the observed change in F in the upper stratosphere. Implications of the present findings and comparison with model results are discussed.

Zander, R.↗

Hubble Space Telescope imaging of a radio-quiet galaxy at redshift z = 3.4

We have observed with the Wide Field/Planetary Camera (WF/PC) on the Hubble Space Telescope (HST) a radio-quiet Ly alpha-emitting galaxy at redshift z = 3.428 (G2 below). The images probe the rest-frame UV light around 1250 A with an angular resolution of approx. = 0.1 sec, corresponding to 1.4 h(exp -1, sub 50) kpc at redshift z = 3.4 (in this Letter we use q(sub 0) = 0 and H(sub 0) = 50 h(exp -1, sub 50) km/s/Mpc). The light profile of the central approx. 10h(exp -1, sub 50) kpc region is well fitted by an r(exp 1/4) law with r(sub e) approx. = 1.3 h(exp -1, sub 50) kpc, suggesting a dynamically relaxed state. The outer regions are characterized by the presence of substructures, such as an elongated formation and low surface brightness nebulosities. The isophotal analysis shows no evidence of an active galactic nuclei (AGN)-like unresolved source in the center. The structural properties of G2 are consistent with a dynamically hot stellar system observed during an early phase of star formation, very likely the progenitor of an elliptical or the bulge of a spiral galaxy.

Giavalisco, Mauro↗

Increase of carbonyl fluoride (COF2) in the stratosphere and its contribution to the 1992 budget of inorganic fluorine in the upper stratosphere

Volume mixing ratio profiles of COF2 have been derived through most of the stratosphere between 30 deg N and 54 deg S from series of 0.01-cm(exp -1) resolution infrared solar spectra recorded in the occultation mode by the atmospheric trace molecule spectroscopy (ATMOS) instrument during the ATLAS 1 space shuttle mission of March-April 1992. When compared with similar results obtained from the ATMOS/Spacelab 3 mission of April-May 1985, the cumulative increase in the burden of COF2 in the middle and upper stratosphere was found to be 67% for that 7-year time interval. By combining a subset of these COF2 results with upper stratospheric concentrations of HF also derived from the ATMOS observations, it was further found that the budget of inorganic fluorine above 35 km altitude increased by (60 +/- 10) % over the 1985-1992 time interval, which corresponds to an average exponential rate of increase of(6.7 +/- 1.1) % /yr , or a linear rate of increase referenced to 1985 of (8.5 +/- 1.3) % /yr at the 1(sigma) confidence level. The total inorganic F atom volume mixing ratio found in the upper stratosphere for 1985 and 1992 and the increase during this period mirror the rise in man-made fluorine-bearing compounds at the ground during the early to mid 1980s. This demonstrates the negligible impact of natural sources of fluorine, in particular volcanic activity, on the observed change of F in the upper stratosphere. Implications of the present findings and comparison with model results are discussed.

Zander, R.↗

Flood Management Enhancement Using Remotely Sensed Data

SENTAR, Inc., entered into a cooperative agreement with NASA Goddard Space Flight Center (GSFC) in December 1994. The intent of the NASA Cooperative Agreement was to stimulate broad public use, via the Internet, of the very large remote sensing databases maintained by NASA and other agencies, thus stimulating U.S. economic growth, improving the quality of life, and contributing to the implementation of a National Information Infrastructure. SENTAR headed a team of collaborating organizations in meeting the goals of this project. SENTAR's teammates were the NASA Marshall Space Flight Center (MSFC) Global Hydrology and Climate Center (GHCC), the U.S. Army Space and Strategic Defense Command (USASSDC), and the Alabama Emergency Management Agency (EMA). For this cooperative agreement, SENTAR and its teammates accessed remotely sensed data in the Distributed Active Archive Centers, and other available sources, for use in enhancing the present capabilities for flood disaster management by the Alabama EMA. The project developed a prototype software system for addressing prediction, warning, and damage assessment for floods, though it currently focuses on assessment. The objectives of the prototype system were to demonstrate the added value of remote sensing data for emergency management operations during floods and the ability of the Internet to provide the primary communications medium for the system. To help achieve these objectives, SENTAR developed an integrated interface for the emergency operations staff to simplify acquiring and manipulating source data and data products for use in generating new data products. The prototype system establishes a systems infrastructure designed to expand to include future flood-related data and models or to include other disasters with their associated remote sensing data requirements and distributed data sources. This report covers the specific work performed during the seventh, and final, milestone period of the project, which began on 1 October 1996 and ended on 31 January 1997. In addition, it provides a summary of the entire project.

Romanowski, Gregory J.↗

Ultrasonic Imaging System

An imaging system is described which can be used to either passively search for sources of ultrasonics or as an active phase imaging system. which can image fires. gas leaks, or air temperature gradients. This system uses an array of ultrasonic receivers coupled to an ultrasound collector or lens to provide an electronic image of the ultrasound intensity in a selected angular region of space. A system is described which includes a video camera to provide a visual reference to a region being examined for ultrasonic signals.

Youngquist, Robert C.↗

The Interplay Between Hardware and Control System Design in the Development of the Active Rack Isolation System

A primary mission of the International Space Station (ISS) is to provide a premier microgravity laboratory environment for conducting acceleration sensitive scientific research. In order to accomplish this goal, vibroacoustic disturbances caused by station activities that occur during the microgravity mode of operation, must be controlled. In addition to source isolation and other passive isolation methods, the ISS uses active isolation at the receiver, through the use of an Active Rack Isolation System (ARIS), as part of its overall vibration isolation strategy. A schematic diagram of a typical ARIS payload rack is shown. The ARIS isolation control system senses rack acceleration via three triaxial accelerometer heads and uses eight pushrod actuators to perform active vibration attenuation. Position sensors housed in the actuator assembly are used to sense the relative position between the rack and the station. Electrical power, data and other essential resources are routed through a set of umbilicals that interface with a passthrough panel at the bottom of the rack. A representative umbilical set is shown.

Fialho, Ian J.↗

A Coordinated RXTE/ASCA Study of Absorption Dips in Circinus X-1 at Phase Zero

This proposal was for an Rossi X Ray Timing Explorer (RXTE) study of Circinus X-1 with the ASCA satellite for the purpose of studying the iron emission feature during intensity dips. These dips had been discovered previously with ASCA and they appeared to vary in equivalent width and in the energy of the iron K edge. Proper analyses requires good continuum measurements which Rossi X Ray Timing Explorer/Proportional Counter Array (RXTE/PCA) could provide. Also, the PCA data would show any temporal evolution correlated with spectral evolution. RXTE provided 90 ks of data during March 3-5, 1998 which included phase zero which is where the dips usually take place. The ASCA observations were taken by Dr. Neil Brandt of Penn State University. Unfortunately, the source intensity showed far less dipping activity than is typical near phase zero. The light curve exhibited only very narrow sporadic dips rather than some long deep dips necessary for sufficient statistics in the ASCA and RXTE instruments for spectral studies. This prevented us from carrying out the primary goal of the proposal.

Bradt, Hale↗

Modeling Coma Gas Jets in Comet Hale-Bopp

We present an analysis of OH, CN, and C2 jets observed in Comet Hale-Bopp. The relative contributions from and composition of the coma gas sources, and the parameters describing the active areas responsible for the gas jets will be discussed. Additional information is contained in the original extended abstract.

Lederer, S. M.↗

Adaptive Multi-Layer LMS Controller Design and Application to Active Vibration Suppression on a Truss and Proposed Impact Analysis Technique

This research develops an adaptive controller that actively suppresses a single frequency disturbance source at a remote position and tests the system on the NPS Space Truss. The experimental results are then compared to those predicted by an ANSYS finite element model. The NPS space truss is a 3.7-meter long truss that simulates a space-borne appendage with sensitive equipment mounted at its extremities. One of two installed piezoelectric actuators and an Adaptive Multi-Layer LMS control law were used to effectively eliminate an axial component of the vibrations induced by a linear proof mass actuator mounted at one end of the truss. Experimental and analytical results both demonstrate reductions to the level of system noise. Vibration reductions in excess of 50dB were obtained through experimentation and over 100dB using ANSYS, demonstrating the ability to model this system with a finite element model. This report also proposes a method to use distributed quartz accelerometers to evaluate the location, direction, and energy of impacts on the NPS space truss using the dSPACE data acquisition and processing system to capture the structural response and compare it to known reference Signals.

Barney, Timothy A.↗

Passive Isolators for use on the International Space Station

The value of the International Space Station (ISS) as a premier microgravity environment is currently at risk due to structure-borne vibration. The vibration sources are varied and include crew activities such as exercising or simply moving from module to module, and electro- mechanical equipment such as fans and pumps. Given such potential degradation of usable microgravity, anything that can be done to dampen vibration on-orbit will significantly benefit microgravity users. Most vibration isolation schemes, both active and passive, have proven to be expensive - both operationally and from the cost of integrating isolation systems into primary/secondary structural interfaces (e.g., the ISS module/rack interface). Recently, passively absorptive materials have been tested at the bolt interfaces between the operating equipment and support structure (secondary/tertiary structural interfaces). The results indicate that these materials may prove cost-effective in mitigating the vibrational problems of the ISS. We report herein tests of passive absorbers placed at the interface of a vibration-inducing component: the Development Distillation Assembly, a subassembly of the Urine Processing Assembly, which is a rotating centrifuge and cylinder assembly attached to a mounting plate. Passive isolators were installed between this mounting plate and its support shelf. Three materials were tested: BISCO HT-800, Sorbothane 30 and Sorbothane 50, plus a control test with a hard shim. In addition, four distinct combinations of the HT-800 and Sorbothane 50 were tested. Results show a significant (three orders of magnitude) reduction of transmitted energy, as measured in power spectral density (PSD), using the isolation materials. It is noted, however, that passive materials cannot prevent the transmission of very strong forces or absorb the total energy induced from structural resonances.

Houston, Janice↗

Active Control of Fan-Generated Tone Noise

This paper reports on an experiment to control the noise radiated from the inlet of a ducted fan using a time domain active adaptive system. The control ,sound source consists of loudspeakers arranged in a ring around the fan duct. The error sensor location is in the fan duct. The purpose of this experiment is to demonstrate that the in-duct error sensor reduces the mode spillover in the far field, thereby increasing the efficiency of the control system. The control system is found to reduce the blade passage frequency tone significantly in the acoustic far field when the mode orders of the noise source and of the control source are the same, when the dominant wave in the duct is a plane wave. The presence of higher order modes in the duct reduces the noise reduction efficiency, particularly near the mode cut-on where the standing wave component is strong, but the control system converges stably. The control system is stable and converges when the first circumferential mode is generated in the duct. The control system is found to reduce the fan noise in the far field on an arc around the fan inlet by as much as 20 dB with none of the sound amplification associated with mode spillover.

Gerhold, Carl H.↗