Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZINC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Analysis of the Vacancy System of Restructured Zinc by the Positron Annihilation Method

We have obtained restructured zinc (high-purity zinc prepared by mechanothermal action of various intensity levels) and have analyzed its structure by the positron spectroscopy methods. Bulk vacancytype defects (vacancies and vacancy clusters), as well as the regions with an extended crystal lattice, have been discovered in the restructured samples and analyzed quantitatively. These effects are responsible for the emergence of internal microstresses in the material, which modify its properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of the Structural Evolution of Zinc Oxide Powders Obtained by Mechanical High-Energy Grinding

Zinc oxide powders made by mechanical high-energy grinding have been investigated using the methods of scanning electron microscopy, thermal nitrogen desorption, and Raman spectroscopy of infrared Fourier spectroscopy. Their structural evolution, including reduction of the average size of crystallites, increase in specific surface area, as well as changes in the number and ratio of adsorption centers, has been demonstrated. The data on the reconstruction of the surface of zinc oxide powders and multiple bond breaking in near-surface areas resulting from long-term dispersion have been presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bifunctional MnO x electrocatalysts for zinc–air batteries in alkaline electrolytes

The growing need for rechargeable zinc–air batteries has led researchers to look for low-cost and robust catalytic candidates. Furthermore, manganese oxides are promising for their low toxicity, natural abundance and low cost. In this review, we summarize the versatility of manganese oxides which is achievable by adjusting synthetic parameters. In addition, we highlight how manganese oxides impact zinc–air electrochemistry.

25 ENERGY STORAGE↗

EFFECT OF PORE SIZE ON TRAPPING ZINC VAPORS

A series of experiments were conducted to determine the effect of pore size on pumping efficiency and zinc vapor trapping efficiency. A simple pumping efficiency test was conducted for all five pore diameters where it was observed that evacuation times were adversely affected by reducing the pore size below 5 {micro}m. Common test conditions for the zinc trapping efficiency experiments were used. These conditions resulted in some variability, to ascribe different efficiencies to the filter media. However, the data suggest that there is no significant difference in trapping efficiency for filter media with pores from 0.2 to 20 {micro}m with a thickness of 0.065-inch. Consequently, the 20 {micro}m pore filter media that is currently used at SRS is a suitable filter material for to utilize for future extractions. There is evidence that smaller pore filter will adversely affect the pumping times for the TEF and little evidence to suggest that a smaller pore diameters have significant impact on the trapping efficiency.

99 GENERAL AND MISCELLANEOUS↗

Initial test results from the RedFlow 5 kW, 10 kWh zinc-bromide module, phase 1

In this paper the performance results of the RedFlow zinc-bromide module (ZBM) Gen 2.0 are reported for Phase 1 of testing, which includes initial characterization of the module. This included physical measurement, efficiency as a function of charge and discharge rates, efficiency as a function of maximum charge capacity, duration of maximum power supplied, and limited cycling with skipped strip cycles. The goal of this first phase of testing was to verify manufacturer specifications of the zinc-bromide flow battery. Initial characterization tests have shown that the ZBM meets the manufacturer's specifications. Further testing, including testing as a function of temperature and life cycle testing, will be carried out during Phase 2 of the testing, and these results will be issued in the final report, after Phase 2 testing has concluded.

25 ENERGY STORAGE↗

Upcycling Polyethylene Waste Into Hybrid Graphitic Porous Carbon Materials Used in High-Performance Zinc-Ion Hybrid Capacitors

Polyethylene (PE) waste is a challenge to upcycle into useful materials because this plastic tends to decompose into volatile compounds when heated at relatively low temperatures. In this work, we report a chemical process that addresses this challenge by converting mixtures of linear low-density polyethylene (LLDPE), low-density polyethylene (LDPE), and high-density polyethylene (HDPE) waste into a hybrid graphitic porous carbon (HGPC) that can be used as a zinc-ion hybrid capacitor cathode. The process uses a low temperature thermal oxidation pre-treatment step, with assistance of an inert solid additive (KCl) to increase the effective surface area of the PE melt, to functionalize, cross-link, and stabilize the PE waste followed by carbonization and catalytic graphitization steps at higher temperatures with a potassium carbonate (K2CO3) catalyst. The PE waste derived HPGC (PW-HPGC) has a hybrid structure composed of graphene-like carbon nanosheets grown on the surface of carbon particles, high porosity with the Brunauer–Emmett–Teller (BET) specific surface area up to 1,763 m2g-1, and good graphitic degree with average Raman I2D/IG ratios of 0.53. When used as a cathode material for zinc-ion hybrid capacitors, this PW-HGPC exhibits an excellent specific capacity up to 126.7 mAhg-1 at high mass loading of 10 mgcm-2. Moreover, PW-HGPC exhibits remarkable cycling stability with capacity retention of >94% after 10,000 cycles at a current density of 2.0 A g-1.

hybrid graphitic porous carbon↗

Foliar Application of an Inositol-Based Plant Biostimulant Boosts Zinc Accumulation in Wheat Grains: A μ-X-Ray Fluorescence Case Study

There has been much interest in the incorporation of organic molecules or biostimulants into foliar fertilizers with the rationalization that these compounds will enhance the uptake, or subsequent mobility of the applied nutrient. The objective of this research was to investigate the effects of an inositol-based plant stimulant on the mobility and accumulation of foliar-applied zinc (Zn) in wheat plants ( Triticum aestivum L.). High-resolution elemental imaging with micro-X-ray fluorescence (μ-XRF) was utilized to examine Zn distribution within the vascular bundle of the leaf and whole grains. The inclusion of myo -inositol with Zinc sulfate, significantly increased Zn concentration in shoots in contrast to untreated controls and Zn sulfate applied alone. Foliar Zn treated plants increased Zn in grains by 5–25% with myo -inositol plus Zn treated plants significantly increasing grain Zn concentration compared to both Zn treated and non-treated controls. XRF imaging revealed Zn enrichment in the bran layer and germ, with a very low Zn concentration present in the endosperm. Plants treated with Zn plus myo -inositol showed an enhanced and uniform distribution of Zn throughout the bran layer and germ with an increased concentration in the endosperm. While our data suggest that foliar application of myo -inositol in combination with Zn may be a promising strategy to increase the absorption and mobility of Zn in the plant tissue and subsequently to enhance Zn accumulation in grains, further research is needed to clarify the mechanisms by which myo -inositol affects plant metabolism and nutrient mobility.

59 BASIC BIOLOGICAL SCIENCES↗

Blue and white light emission from zinc oxide nanoforests

Blue and white light emission is observed when high voltage stress is applied using micrometer-separated tungsten probes across a nanoforest formed of ZnO nanorods. The optical spectrum of the emitted light consistently shows three fine peaks with very high amplitude in the 465–485 nm (blue) range, corresponding to atomic transitions of zinc. Additional peaks with smaller amplitudes in the 330–650 nm range and broad spectrum white light is observed depending on the excitation conditions. The spatial and spectral distribution of the emitted light, with pink–orange regions identifying percolation paths in some cases and high intensity blue and white light with center to edge variations in others, indicate that multiple mechanisms lead to light emission. Under certain conditions, the tungsten probe tips used to make electrical contact with the ZnO structures melt during the excitation, indicating that the local temperature can exceed 3422 °C, which is the melting temperature of tungsten. The distinct and narrow peaks in the optical spectra and the abrupt increase in current at high electric fields suggest that a plasma is formed by application of the electrical bias, giving rise to light emission via atomic transitions in gaseous zinc and oxygen. The broad spectrum, white light emission is possibly due to the free electron transitions in the plasma and blackbody radiation from molten silicon. The white light may also arise from the recombination through multiple defect levels in ZnO or due to the optical excitation from solid ZnO. The electrical measurements performed at different ambient pressures result in light emission with distinguishable differences in the emission properties and I – V curves, which also indicate that the dielectric breakdown of ZnO, sublimation, and plasma formation processes are the underlying mechanisms.

electrical stress↗

NASA Engineering and Safety Center Technical Bulletin No. 21-05: Industry Recommendations from Arecibo Observatory Zinc Spelter Socket Joint Failure Analysis

A structural analysis and forensic investigation concluded that the Arecibo Observatory M4N socket joint failure in August 2020 was primarily due to cumulative damage caused by initially low structural design margins and a high percentage of sustained load, resulting in zinc creep deformation, progressive internal socket wire damage, and eventual loss of joint capacity. Open spelter sockets of this type are used throughout industry in stay cables. Recommendations are proposed to prevent failures of similar socket joints, including verification of positive stress margins in socket joint wires for all failure modes, periodic visual inspections with pass/fail criteria for zinc extrusion that are tied to structural qualification, and revisiting codes/ industry standards to capture lessons learned.

Arecibo Observatory↗

Fabrication of lithium-doped zinc oxide film by anodic oxidation and its ferroelectric behavior

A lithium-doped zinc oxide (ZnO) film was obtained by the anodic oxidation of a zinc sheet in a lithium hydroxide (LiOH) solution under an external DC voltage. The formation of the ZnO film on the surface of the Zn sheet is attributed to two simultaneous processes: the electrochemical oxidation of Zn to ZnO, and the chemical dissolution of ZnO. It was also confirmed that Li element was successfully introduced into the lattice of the ZnO film. The curves of the polarization versus applied field were measured to be hysteresis loops, suggesting ferroelectricity of the Li-doped ZnO film. The remanent polarization and the coercive field of the film were measured to be 4.7 x 10{sup -3} C m{sup -2} and 1.2 x 10{sup 7} V m{sup -1}, respectively. This ferroelectricity is believed to be the result of the occupation of off-centered positions in oxygen tetrahedra by the Li{sup +} ions.

36 MATERIALS SCIENCE↗

Flux synthesis of (3,4)-connected zinc phosphites with different framework topologies

Two three-dimensional open-framework zinc phosphites, H{sub 2}aem.Zn{sub 3}(HPO{sub 3}){sub 4}.0.5H{sub 2}O (1) and H{sub 2}apm.Zn{sub 3}(HPO{sub 3}){sub 4} (2), have been synthesized by a phosphorous acid flux method, where aem=4-(2-aminoethyl)morpholine and apm=4-(3-aminopropyl)morpholine. Compound 1 crystallizes in the monoclinic system, P2{sub 1}/c, a=9.5852(7) A, b=20.3941(8) A, c=10.5339(8) A, beta=94.125(9){sup o}, V=2053.8(2) A{sup 3}, Z=4, R{sub 1}=0.0319, wR{sub 2}=0.0628. Compound 2 crystallizes in the monoclinic system, P2{sub 1}/n, a=8.589(2) A, b=14.020(3) A, c=16.606(3) A, beta=97.190(8){sup o}, V=1983.9(7) A{sup 3}, Z=4, R{sub 1}=0.0692, wR{sub 2}=0.1479. Both compounds are based on (3,4)-connected networks with 8- and 12-ring channels, which are constructed from Zn{sub 3}(HPO{sub 3}){sub 4} clusters as the same secondary building units. These inorganic clusters are spatially organized by different structure-directing agents into different three-dimensional frameworks. - Graphical abstract: Two three-dimensional open-framework zinc phosphites have been synthesized by a phosphorous acid flux method. The two compounds are constructed from Zn{sub 3}(HPO{sub 3}){sub 4} clusters and have noz and pcu topologies, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two multi-dimensional frameworks constructed from zinc coordination polymers with pyridine carboxylic acids

Two novel zinc coordination polymers [Zn{sub 2}(H{sub 2}O)L(MoO{sub 4})]{sub n} (1) and [Zn{sub 4}(PO{sub 4}){sub 2}L'(H{sub 2}O)]{sub n} (2) (H{sub 2}L=2,2'-bipyridine-6.6'-dicarboxylic acid, H{sub 2}L'=2,2'-bipyridine-4,4'-dicarboxylic acid) have been hydrothermally synthesized and characterized by elemental analyses, IR spectra, UV spectra, single-crystal X-ray diffraction and thermogravimetric analyses. Structural analyses indicate that 1 represents a 2-D sheet structure built by dimeric [Zn{sub 2}L(H{sub 2}O)]{sup 2+} units and MoO{sub 4}{sup 2-} groups whereas 2 displays an interesting 3-D framework constructed by tetranuclear zinc clusters, L'{sup 2-} ligands and PO{sub 4}{sup 3-} groups. Examination of UV spectra suggests that both 1 and 2 can stably exist in the pH range of 2.45-5.45 and 3.01-8.55 in aqueous solution, respectively. The room-temperature solid-state photoluminescence of 1 and 2 are derived from the intra-ligands {pi}-{pi}* transitions of H{sub 2}L and H{sub 2}L' ligands and the ligand-to-metal-charge-transfer transitions. - Graphical Abstract: Two new transition metal coordination polymers, namely, [Zn{sub 2}(H{sub 2}O)L{sub 1}(MoO{sub 4})]{sub n} (1), [Zn{sub 4}(PO{sub 4}){sub 2}L{sub 2}(H{sub 2}O)]{sub n} (2) (H{sub 2}L{sub 1}=2,2'-bipyridine-6,6'-dicarboxylic acid, H{sub 2}L{sub 2}=2,2'-bipyridine-4,4'-dicarboxylic acid) have been hydrothermally synthesized. 1 represents a 2-D sheet structure while 2 represents 3-D network. Highlights: {yields}Two new transition metal coordination polymers have been hydrothermally synthesized. > The two compounds have been characterized by elemental analyses, IR, UV spectra, single-crystal X-ray diffraction, thermogravimetric analyses and photoluminescence. > Compound 1 represents a 2-D sheet structure while 2 represents 3-D network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of > 5 wt % zinc at the Kimberley outcrop, Gale crater, Mars

Zinc-enriched targets have been detected at the Kimberley formation, Gale crater, Mars, using the Chemistry Camera (ChemCam) instrument. The Zn content is analyzed with a univariate calibration based on the 481.2 nm emission line. The limit of quantification for ZnO is 3 wt % (at 95% confidence level) and 1 wt % (at 68% confidence level). The limit of detection is shown to be around 0.5 wt %. As of sol 950, 12 targets on Mars present high ZnO content ranging from 1.0 wt % to 8.4 wt % (Yarrada, sol 628). Those Zn-enriched targets are almost entirely located at the Dillinger member of the Kimberley formation, where high Mn and alkali contents were also detected, probably in different phases. Zn enrichment does not depend on the textures of the rocks (coarse-grained sandstones, pebbly conglomerates, and resistant fins). The lack of sulfur enhancement suggests that Zn is not present in the sphalerite phase. Zn appears somewhat correlated with Na 2 O and the ChemCam hydration index, suggesting that it could be in an amorphous clay phase (such as sauconite). On Earth, such an enrichment would be consistent with a supergene alteration of a sphalerite gossan cap in a primary siliciclastic bedrock or a possible hypogene nonsulfide zinc deposition where Zn, Fe, Mn would have been transported in a reduced sulfur-poor fluid and precipitated rapidly in the form of oxides.

58 GEOSCIENCES↗