Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Well Locations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Terrestrial geophysics in the SeaRISE project

Some areas of research in the SeaRISE project are briefly discussed. They are as follows: (1) Radar Sounding serves multiple purposes. The most general and obvious is mapping ice thickness and the surface and bedrock topography of the ice sheet. (2) The purpose of Seismic Shooting, in addition to water depth measurements on floating ice, is to provide information about the internal physical characteristics of the ice sheet, the rock beneath it, and the interface between the two. (3) Passive Seismic monitoring of microearthquakes can be used to study brittle fracture within the ice or the rock beneath it. Common parameters available from these studies are fault location, orientation, and displacement, as well as the size of the rupture area, stress drop, and energy released. (4) There is a large contrast in Electrical Resistivity between ice or permafrost on the one hand and liquid water or wet rock on the other hand. Thus, electrical resistivity profiles have the ability of revealing the depth to the melting point, whether it is found at the base of the ice or in the subglacial rock. (5) Gravity anomalies, especially combined with seismic measurements, are an effective tool for determining deeper crustal structure. Anomalies averaged over extensive areas are useful also for their potential to reveal isostatic imbalance, which is a measure of average glacial change over the last several hundred years.

Bentley, C. R.↗

Discovery of a young, 267 millisecond pulsar in the supernova remnant W44

This paper reports the discovery of a 267 msec pulsar, PSR 1853 + 01, in the SNR W44 (G34.7 - 0.4), located south of the W44, well within its radio shell and at the outher edge of the X-ray emission region which fills the SNR interior. The PSR 1853 + 01 is separated only 20 arcmin from the PSR 1854 + 00 pulsar discovered by Mohanty (1983). Results of timing observatons of PSR 1853 + 01 are presented, and a possible relationship between the two objects is examined. It is suggested that the two pulsars may have a common origin in a binary system disrupted by the explosion that produced W44.

Wolszczan, A.↗

The definition and stability of local inertial reference frames

VLBI measurements of extragalactic radio sources are utilized to develop a definition system for local inertial reference frames. Significant astrometric errors are identified and minimized by means of a parameter-estimation technique. A reference frame is measured for 30 min to observe the radio emission of the object to be located in the frame as well as the emission from about five additional sources which define the frame. Because the structures of the objects are unknown and tropospheric fluctuations exist, limiting errors exist for both single-epoch position determination and epoch-to-epoch differential position measurements. Data are presented regarding relativistic gravitational deflection by Jupiter which show that the local reference frame is stable at 240 microarcseconds over 12 days.

Treuhaft, R. N.↗

CCD With Back-Side Illumination And Charge Steering

Proposed charge-coupled device (CCD) imaging array of photodetectors has features of back-side-illuminated CCD and interline-transfer CCD. Photoelectrons generated near back surface and swept by electric fields toward front into collecting potential wells, not directly opposite that location. By suitable timing of control signals, charges from multiple image frames stored in rapid succession. Useful in imaging rapid transient phenomena as chemically reacting flows, with interframe intervals of microseconds.

Fossum, Eric R.↗

Lunar and Hawaiian lava tubes: Analogs and uses based on terrestrial field data

Presented here is an analysis of the data collected for a large number of Hawaiian lava tubes on the islands of Oahu, Molokai, and Hawaii. The results are extrapolated to lunar conditions. It is argued that lava tubes that formed on the Earth and the Moon are relatively stable over time, as illustrated by the ridigity of the Hawaiian prehistoric lava tubes as well as the historic tubes located in the bombing range near Mauna Loa. These natural structures should be considered for use in planning for the expansion and advanced stages of the future manned lunar base.

Coombs, Cassandra R.↗

Remote Detection of Biological Particles and Chemical Plumes Using UV Fluorescence Lidar

A lidar system based on ultraviolet (UV) laser induced fluorescence (LIF) was developed for the remote detection of atmospherically dispersed biological particles and chemical vapors. This UV fluorescence lidar has many potential applications for monitoring environmental pollution, industrial waste emission, agricultural insect control, illicit chemical processing, and military defense operations. The general goal of this work is to investigate the research issues associated with the long range detection and identification of chemicals, e.g. aromatic solvents and chemical precursors, and biological materials, e.g. bacillus thuringiensis (BT) and bacillus globiggi (BG). In the detection of biological particulates, we are particularly interested in extending the detection range of an existing solar-blind 248-nm lidar system. We are investigating the use of longer excitation laser wavelengths (i.e. lambda greater than 280-nm to have more favorable atmospheric light transmission characteristics) for improving detection range to better than 10 km. In the detection of chemical plumes, our main research objectives are to determine how accurately and sensitively a chemical plume can be located at range, and how well spectrally the chemical species can be measured to allow their identification.

J J Tiee↗

Flow prediction over a transport multi-element high-lift system and comparison with flight measurements

Accurate prediction of surface-pressure distributions, merging boundary-layers, and separated-flow regions over multi-element high-lift airfoils is required to design advanced high-lift systems for efficient subsonic transport aircraft. The availability of detailed measurements of pressure distributions and both averaged and time-dependent boundary-layer flow parameters at flight Reynolds numbers is critical to evaluate computational methods and to model the turbulence structure for closure of the flow equations. Several detailed wind-tunnel measurements at subscale Reynolds numbers were conducted to obtain detailed flow information including the Reynolds-stress component. As part of a subsonic-transport high-lift research program, flight experiments are conducted using the NASA-Langley B737-100 research aircraft to obtain detailed flow characteristics for support of computational and wind-tunnel efforts. Planned flight measurements include pressure distributions at several spanwise locations, boundary-layer transition and separation locations, surface skin friction, as well as boundary-layer profiles and Reynolds stresses in adverse pressure-gradient flow.

Vijgen, P. M. H. W.↗

Direct numerical simulation of laminar breakdown in high-speed, axisymmetric boundary layers

The compressible Navier-Stokes equations are solved using spectral collocation and high-order compact-difference techniques to simulate the laminar breakdown in high-speed, axisymmetric boundary-layer flow. Mach 4.5 flow along a hollow cylinder and Mach 6.8 flow along a sharp cone are considered. Data obtained replicate two previously unexplained phenomena, namely, the appearance of so-called 'rope-like waves' and 'the precursor transition effect', in which transitional flow originates near the critical layer well upstream of the transition location at the wall. The numerical data also reveal that neither of these effects can be explained, even qualitatively, by linear stability theory alone. It is shown that rope-like appearance arises from secondary instability. Certain features of the precursor transition effect also emerge from secondary instability but its nature is revealed to be fundamentally nonlinear.

Pruett, C. D.↗

Theoretical investigation of variable periodicity (graded) multilayers for hard x ray applications

The objective of this research was to investigate the possibility of increasing the useful bandwidth of multilayer mirrors. Mirrors 'constructed' with non-periodically spaced reflecting surfaces were considered. These structures included depth-graded and laterally-graded mirrors as well as those with reflectors located via a log-periodic spacing rule. No enhancement of bandwidth resulted from simulations of simple versions of any of the three non-periodic mirrors. However, certain depth-graded structures did exhibit reflectances essentially the same as from uniform mirrors. Moreover, it was found that some control was possible regarding the location (with respect to energy) of the maximum reflectance peak. Effective bandwidth was increased when composite models were simulated. In two of the cases studied, bandwidth was enhanced by a factor of approximately 3. One model consisted of a depth-graded mirror constructed with three separately defined structures, or blocks. Each block consisted of two layer-pairs repeated three times. Then, the entire 18 layer-pair group was repeated several times. Simulation of this 3 block depth-graded configuration yielded three reflectance peaks, one representative of each depth-graded block. The other configurations resulting in enhanced bandwidth assumed independently constructed mirrors immediately adjacent to each other and sharing the same substrate. Reflectance peaks from each mirror appeared in the response. Both basic models show greatly enhanced effective bandwidths even though the reflectance curves appear as non-overlapping for these specific models. Additionally, these configurations are realizable. Details are contained in the section, DESIGN SIMULATIONS.

Kinney, Ralph A.↗

Coronal streamers as detected with the SPARTAN 201-01 white light coronagraph

The preliminary results concerning the fine scale structure analysis of the streamers on the east limb and the region between these streamers, as well as their morphological and physical characteristics are presented. The results were obtained using white light polarized brightness data. The solar corona was observed with an externally occulted white light coronagraph carried on the SPARTAN 201-01 spacecraft for a 47 h period beginning on DOY 101, 1993. At this phase of the solar magnetic activity cycle there were well developed coronal helmet streamers located over both the east and west limbs of the sun. The photometric properties of one streamer found near the south east limb of the sun are similar to those measured of helmet streamers at the time of the 1973 total eclipse by both the ground based white light coronal camera and the Skylab externally occulted coronagraph.

Fisher, Richard↗

Cross-correlation of point series using a new method

Traditional methods of cross-correlation of two time series do not apply to point time series. Here, a new method, devised specifically for point series, utilizes a correlation measure that is based in the rms difference (or, alternatively, the median absolute difference) between nearest neightbors in overlapped segments of the two series. Error estimates for the observed locations of the points, as well as a systematic shift of one series with respect to the other to accommodate a constant, but unknown, lead or lag, are easily incorporated into the analysis using Monte Carlo techniques. A methodological restriction adopted here is that one series be treated as a template series against which the other, called the target series, is cross-correlated. To estimate a significance level for the correlation measure, the adopted alternative (null) hypothesis is that the target series arises from a homogeneous Poisson process. The new method is applied to cross-correlating the times of the greatest geomagnetic storms with the times of maximum in the undecennial solar activity cycle.

Strothers, Richard B.↗

The structure of mass-loading shocks. 1: Comets

A new multifluid model to describe the solar wind-cometary ion plasma in the outer cometary coma is derived. This model is distinguished from previous multifluid models in that wave-particle effects are included explicitly. By considering hydrodynamic timescales, self-consistent dissipative terms (which correspond to the spatial diffusion of cometary ions) are derived, thereby allowing the structure of a cometary bow shock to be resolved. In the hypersonic limit, our diffusive multifluid model reveals an attractive connection to the one-fluid model formulated by Biermann et al. (1967), a connection which serves as an important guide when investigating our more complicated nonhypersonic diffusive model. The detailed model consists of cometary ions diffusing in a warm solar wind which is heated by the dissipation of Alfvenic turbulence (in situ and generated by the initial ring beam distribution). The quasi-parallel cometary shock is found to be at least an order of magnitude thicker than a quasi-perpendicular cometary shock. It is furthermore found that for undisturbed solar wind (sonic) Mach numbers in excess of approximately 6, the cometary bow shock (for both perpendicular and parallel cases) is smoothed completely by the cometary ions and no 'proton' or thermal subshock is necessary. Finally, a detailed comparison of the model with the plasma observations made at Halley by Giotto is undertaken. It is found that the observed shock structure, thickness, location, and plasma parameters compare well with the predictions of the theoretical model, particularly in the case of the quasi-parallel shock.

Zank, G. P.↗

Geometry and pulse profiles of x-ray pulsars: Asymmetric relativistic fits to 4U1538 - 52 and vela x-1

Model calculation of inhomogenuous magnetized neutron star atmospheres are used to analyze the phase-dependent spectra of 4U 1538-52 and Vela X-1 taking into account general relativistic effects. A chi (exp 2) fitting procedure is used on the Ginga data for these objects to determine the geometry and the magnetic structure of the polar caps, as well as their size and location on the surface of the stars. Other parameters determined by the fit are the masses and radii of neutron stars, the accretion rates, and the rotation and magnetic inclination angles including an azimuthal offset to reproduce the asymmetry of the pulse shapes. We find that general relativistic effects play a significant role in determining the derived cap sizes, the fluxes, and the observational appearance of the pulses. There is evidence that the polar caps are unequal and nonantipodal, suggesting either an off-center or bent magnetic axis, or a strong nondipole component. The magnetic field structure is approximated by a two-component model. The rotation axes are inferred to be moderately close to the mean magnetic axes and seen at large inclinations with respect to the line of sight.

Bulik, T.↗

Results of Aerothermodynamic and Boundary-Layer Transition Testing of 0.0362-Scale X-38 (Rev. 3.1) Vehicle in NASA Langley 20-Inch Mach 6 Tunnel

The aeroheating characteristics of the X-38 Revision 3.1 lifting-body configuration have been experimentally examined in the Langley 20-inch Mach 6 Tunnel. Global surface heat transfer distributions, surface streamline patterns, and shock shapes were measured on a 0.0362-scale model of a proposed Space Station Crew Return Vehicle at Mach 6 in air. Parametric variations include angles-of-attack of 20 deg, 30 deg, and 40 deg; Reynolds numbers based on model length of 0.9 to 3.7 million; and body-flap deflections of O deg, 20 deg, 25 deg, and 30 deg. The effects of discrete roughness elements, which included trip height, location, size, and orientation, as well as multiple-trip parametrics, were investigated. This document is intended to serve as a quick release of preliminary data to the X-38 program; analysis is limited to observations of the experimental trends in order to expedite dissemination.

Berry, Scott A.↗

Unstable Air-Sea Interaction in the Extratropical North Atlantic

The possibility of coupled modes in the extratropical North Atlantic has fascinated the climate community since 1960's. A significant aspect of such modes is an unstable air-sea interaction, also called positive feedback, where disturbances between the atmosphere and ocean grow unbound. If a delayed response exists before the negative feedback takes effect, an oscillatory behaviour will develop. Here we explore the relationship between heat flux (positive upward) and sea surface temperature (SST). Positive feedback is characterized by a cross-correlation between the two where correlation maintains a negative sign whether SST or heat flux leads. We use model results and observations to argue that in the North Atlantic there exist regions with positive feedback. The two main locations coincide with the well-known north-south SST dipole where anomalies of opposite sign occupy areas east of Florida and north-east of Newfoundland. We show that oceanic dynamics, wave propagation and advection, give rise to oceanic anomalies in these regions. Subsequently these anomalies are amplified by atmosphere- ocean interaction: thus a positive feedback.

Hakkinen, Sirpa↗

Subsonic Investigation of a Leading-Edge Boundary Layer Control Suction System on a High-Speed Civil Transport Configuration

A wind tunnel investigation of a leading edge boundary layer control system was conducted on a High Speed Civil Transport (HSCT) configuration in the Langley 14- by 22-Foot Subsonic Tunnel. Data were obtained over a Mach number range of 0.08 to 0.27, with corresponding chord Reynolds numbers of 1.79 x 10(exp 6) to 5.76 x 10(exp 6). Variations in the amount of suction, as well as the size and location of the suction area, were tested with outboard leading edge flaps deflected 0 and 30 deg and trailing-edge flaps deflected 0 and 20 deg. The longitudinal and lateral aerodynamic data are presented without analysis. A complete tabulated data listing is also presented herein.

Campbell, Bryan A.↗

H-alpha Proxies for EIT Crinkles: Further Evidence for Pre-Flare "Breakout"-Type Activity in an Ejective Solar Eruption

We present Halpha observations from Big Bear Solar Observatory of an eruptive flare in NOAA AR 8210, occurring near 22:30 UT on 1998 May 1. Previously, using the EUV Imaging Telescope (EIT) on the SOHO spacecraft, we found that a pattern of transient, localized brightenings, which we call "EIT crinkles," appears in the neighborhood of the eruption near the time of flare onset. These EIT crinkles occur at a location in the active region well separated from the sheared core magnetic fields, which is where the most intense features of the eruption are concentrated. We also previously found that high-cadence images from the Soft X-ray Telescope (SXT) on Yohkoh indicate that soft X-ray intensity enhancements in the core begin after the start of the EIT crinkles. With the Halpha data, we find remote flare brightening counterparts to the EIT crinkles. Lightcurves as functions of time of various areas of the active region show that several of the remote flare brightenings undergo intensity increases prior to onset of principle brightenings in the core region, consistent with our earlier findings from EIT and SXT data. These timing relationships are consistent with the eruption onset mechanism known as the breakout model, introduced by Antiochos and colleagues, which proposes that eruptions begin with reconnection at a magnetic null high above the core region. Our observations are also consistent with other proposed mechanisms which do not involve early reconnection in the core region. As a corollary, our observations are not consistent with the so-called tether cutting models, which say that the eruption begins with reconnection in the core. The Halpha data further show that a filament in the core region becomes activated near the time of EIT crinkle onset, but little if any of the filament actually erupts, despite the presence of a halo Coronal Mass Ejection (CME) associated with this event.

Sterling, Alphonse C.↗

Testing of a Commercial CCD Camera

The results are presented of the examination and testing of a commercial CCD camera designed for use by amateur astronomers and university astronomy laboratory courses. The characteristics of the CCD chip are presented in graphical and tabular form. Individual and averaged bias frames are discussed. Dark frames were taken and counts are presented as a function of time. Flat field and other images were used to identify and locate bad pixel columns as well as pixels which vary significantly from the mean pixel sensitivity.

Tulsee, Taran↗