SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An evanescent field microwave imaging probe based on half-wavelength, microwave transmission line resonators is described. Optimization of the probe tip design, the coupling gap, and the data analysis has resulted in images of metal lines on semiconductor substrates with 2.6 microns spatial resolution and a minimum detectable line width of 0.4 microns at 1 GHz.
The objectives of the project, as they were formulated in the proposal, are the following: (1) Design and development of novel electro-optic modulator using single crystalline film of highly efficient electro-optic organic material integrated with prism coupler; (2) Experimental characterization of the figures-of-merit of the modulator. It is expected to perform with an extinction ratio of 10 dB at a driving signal of 5 V; (3) Conclusions on feasibility of the modulator as an element of data communication systems of future generations. The accomplishments of the project are the following: (1) The design of the electro-optic modulator based on a single crystalline film of organic material NPP has been explored; (2) The evaluation of the figures-of-merit of the electro-optic modulator has been performed; (3) Based on the results of characterization of the figures-of-merit, the conclusion was made that the modulator based on a thin film of NPP is feasible and has a great potential of being used in optic communication with a modulation bandwidth of up to 100 GHz and a driving voltage of the order of 3 to 5 V.
A simple method is presented to estimate the complex dielectric constants of individual layers of a multilayer composite material. Using the MatLab Optimization Tools simple MatLab scripts are written to search for electric properties of individual layers so as to match the measured and calculated S-parameters. A single layer composite material formed by using materials such as Bakelite, Nomex Felt, Fiber Glass, Woven Composite B and G, Nano Material #0, Cork, Garlock, of different thicknesses are tested using the present approach. Assuming the thicknesses of samples unknown, the present approach is shown to work well in estimating the dielectric constants and the thicknesses. A number of two layer composite materials formed by various combinations of above individual materials are tested using the present approach. However, the present approach could not provide estimate values close to their true values when the thicknesses of individual layers were assumed to be unknown. This is attributed to the difficulty in modelling the presence of airgaps between the layers while doing the measurement of S-parameters. A few examples of three layer composites are also presented.
Wireless sensors for high temperature applications such as oil drilling and mining, automobiles, and jet engine performance monitoring require circuits built on wide bandgap semiconductors. In this paper, the characteristics of microwave transmission lines on 4H-High Purity Semi-Insulating SiC and 6H, p-type SiC is presented as a function of temperature and frequency. It is shown that the attenuation of 6H, p-type substrates is too high for microwave circuits, large leakage current will flow through the substrate, and that unusual attenuation characteristics are due to trapping in the SiC. The 4H-HPSI SiC is shown to have low attenuation and leakage currents over the entire temperature range.
The use of electric fields in the growth of protein crystals was investigated, both theoretically and experimentally. We used dc, ac and optical fields to change the spatial distribution of proteins. Dc fields had only local effects, due to the conductivity of the growth solution. We found that for low frequency fields, movement of the buffer and salt ions dominated, and that for high frequency ac fields, &electrophoretic effects could be useful for relocating growing protein crystals. The most promising result was that for optical fields, a large gradient in the field could be used to capture a crystal, and observe growth in-situ. This concept could be developed into an experimental setup compatible with automated x-ray diffraction measurements in microgravity.
Explore the source record for details and available documents.
The paper offers a new approach to evaluating the performance advantage of Ka-band frequency over X-band frequency for receiving spacecraft downlink from deep space missions.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
(viewgraphs) NASA's Deep space missions have used 960 MHz, 2.3 GHz, and 8.4 GHz for spacecraft communication downlinks. Ka-band (32 GHz) is being considered as a downlink frequency for future flight projects.
(View graphs) NASA's Deep space missions have used 960 MHz, 2.3 GHz, and 8.4 GHz for spacecraft communications dowlinks. Ka-band (32 GHz) is being considered as a downlink frequency for future flight projects.
Explore the source record for details and available documents.
We report on the first planar two-diode subharmonic mixer operating at 600MGHz.
Explore the source record for details and available documents.
From Intro.: NASA'a Deep Space Network (DSN) Technology Program at the Jet Propulsion Laboratory (JPL) is evaluating the use of the Ka-Band frequency allocation band (31.8 GHz to 32.3 GHz) for deep space to Earth telecommunications...This paper addresses the three current Ka-Band and X-Band activities, 1)KaAp, 2)SURSAT-1, and 3)KaBLE-II's upcoming Ka-Band experiments aboard Mars Global Surveyor.
This paper summarizes and reports a radiation hardened Spacecraft Integrated Circuit Technology to be flown on board the Cassini spacecraft in 1997 A.D. The Multichip Module has been designed to have an operating life of fifeteen (15) years with appropriate derating guidelines for high reliability.
Explore the source record for details and available documents.
The first Ka-Band Deep Space Network downlink demonstration was recently carried out by the Ka-Band Link Experiment (KABLE) in association with the Mars Observer spacecraft.