Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ti”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Operando X-ray Reflectivity Reveals the Dynamical Response of Ti 3 C 2 MXene Film Structure during Electrochemical Cycling

The dynamical structural response of MXenes during electrochemical ion intercalation is critical for their functionality in fast chemical actuation and high-power electrical energy storage but has yet to be observed. Here, the dynamically evolving layer spacing of a Ti 3 C 2 T $x$ MXene film was observed using time-resolved operando X-ray reflectivity during cyclic voltammetry for applied potentials between +0.3 and -0.7 V (vs Ag/AgCl) at sweep rates 1 ≤ $v$ ≤ 500 mV/s. The pseudocapacitive electrochemical MXene response in the aqueous 0.1 M Li 2 SO 4 electrolyte, including both capacitive and redox characteristics, is characterized by kinetically limited lithium intercalation and layer contraction. In conclusion, two types of dynamical responses were observed: slow and fast lattice contraction regimes versus applied potential are correlated with the capacitive and redox features, respectively, with structural relaxation rates that scale as ~$v$ 1/2 and ~$v$, revealing two distinct dynamical structural responses during electrochemical ion intercalation.

25 ENERGY STORAGE↗
DOE OSTI2020

Multiprincipal Component P2-Na 0.6 (Ti 0.2 Mn 0.2 Co 0.2 Ni 0.2 Ru 0.2 )O 2 as a High-Rate Cathode for Sodium-Ion Batteries

Mixing transition metal cations in nearly equiatomic proportions in layered oxide cathode materials is a new strategy for improving the performances of Na-ion batteries. The mixing of cations not only offers entropic stabilization of the crystal structure but also benefits the diffusion of Na ions with tuned diffusion activation energy barriers. In light of this strategy, a high-rate Na 0.6 (Ti 0.2 Mn 0.2 Co 0.2 Ni 0.2 Ru 0.2 )O 2 cathode was designed, synthesized, and investigated, combining graph-based deep learning calculations and complementary experimental characterizations. This new cathode material delivers high discharge capacities of 164 mA g –1 at 0.1 C and 68 mAh g –1 at a very high rate of 86 C, demonstrating an outstanding high rate capability. Ex situ and operando synchrotron X-ray diffraction were used to reveal the detailed structural evolution of the cathode upon cycling. Using the climbing-image nudged elastic-band calculation and Ab initio molecular dynamics simulations, we show that the optimal transition metal composition enables a percolating network of low barrier pathways for fast, macroscopic Na diffusion, resulting in the observed high rate performance.

25 ENERGY STORAGE↗
DOE OSTI2020

Quantum chemical topology and natural bond orbital analysis of M–O covalency in M(OC 6 H 5 ) 4 (M = Ti, Zr, Hf, Ce, Th, Pa, U, Np)

Covalency is complex yet central to our understanding of chemical bonding, particularly in the actinide series. In this work, we assess covalency in a series of isostructural d and f transition element compounds M(OC 6 H 5 ) 4 (M = Ti, Zr, Hf, Ce, Th, Pa, U, Np) using scalar relativistic hybrid density functional theory in conjunction with the Natural Bond Orbital (NBO), quantum theory of atoms in molecules (QTAIM) and interacting quantum atoms (IQA) approaches. The IQA exchange–correlation covalency metric is evaluated for the first time for actinides other than uranium, in order to assess its applicability in the 5f series. It is found to have excellent correlation with NBO and QTAIM covalency metrics, making it a promising addition to the computational toolkit for analysing metal–ligand bonding. Our range of metrics agree that the actinide-oxygen bonds are the most covalent of the elements studied, with those of the heavier group 4 elements the least. Within the early actinide series, Th stands apart from the other three elements considered, being consistently the least covalent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tracking ion intercalation into layered Ti 3 C 2 MXene films across length scales

Enhancing the energy stored and power delivered by layered materials relies strongly on improved understanding of the intricate interplay of electrolyte ions, solvents, and electrode interactions as well as the role of confinement. Here we report a highly integrated study with multiscale theory/modelling and experiments to track the intercalation of aqueous Li + , Na + , K + , Cs + , and Mg 2+ ions into Ti 3 C 2 MXene. The integrated analysis of experiments assisted by theory/modelling allows for a deep understanding of energy storage processes highlighting the importance of the dynamics of cations, their positionings between MXene sheets, their effects on mechanical properties and capacitive energy storage. Computational simulations and operando calorimetry measurements prove the processes involving cation dehydration and H+ rehydration, showing a good correlation for heat variations between experiments and theory. Operando liquid AFM mapped energy dissipation of ions appears non-uniformly across the MXene surface, indicating heterogeneities of ions inside the MXene and confirming partially the ion behaviour obtained in theory. We directly demonstrate that the average distance between the cation and MXene surface follows a modified two-sided Helmholtz model when plotted versus the open circuit potential capacitance, revealing a different electrical double layer mechanism in confinement. This new fundamental understanding lays the foundation for improved functional devices utilizing electrodes and membranes made of two-dimensional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomistic level aqueous dissolution dynamics of NASICON-Type Li 1+ x Al x Ti 2– x (PO 4 ) 3 (LATP)

Advancing the atomistic level understanding of aqueous dissolution of multicomponent materials is essential. Here, we combined ReaxFF and experiments to investigate the dissolution at the Li 1+ x Al x Ti 2– x (PO 4 ) 3 -water interface. We demonstrate that surface dissolution is a sequentially dynamic process. The phosphate dissolution destabilizes the NASICON structure, which triggers a titanium-rich secondary phase formation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Interfacial charge transfer driven by surface termination-controlled Ti 2 C MXene for enhanced hydrogen storage in magnesium

Two-dimensional transition metal carbides and nitrides (MXenes) with layered structure and high conductivity have been effectively utilized in various energy materials, including as a catalytic support of MgH 2 for hydrogen storage. However, the terminal groups formed on the surface during the etching step tend to deactivate reactive Mg metal and add dead mass, thereby deteriorating the catalytic role of MXene in hydrogen sorption of Mg. For this work, we exploited a molten-salt derived MXene with easily modifiable –Cl terminations, compared to conventional –O, –OH and –F groups, and synthesized a composite of Mg and delaminated Ti 2 CCl x MXene to improve the hydrogen storage performance of Mg through charge transfer. This strategy enables the formation of an intimate interface between Mg and MXene, facilitating charge transfer and thereby boosting the catalytic effect. The resulting composite demonstrates significantly enhanced hydrogen sorption kinetics by modulating Mg–H bond strength. This novel approach of modifying surface terminations leverages the unique properties of MXene as a superior support for active materials, offering broader applications in energy materials.

2D material↗
DOE OSTI2026

In situ electric field X-ray total scattering reveals composition-dependent electromechanical strain mechanisms in (1 − x )BiFe 2/8 Ti 3/8 Mg 3/8 O 3 – x PbTiO 3 ceramics

Ferroelectric materials find many applications in energy and aerospace industries. A major challenge for ferroelectric materials is maintaining their properties at elevated temperatures. The (1 − x )BiFe 2/8 Ti 3/8 Mg 3/8 O 3 – x PbTiO 3 (BFTM–xPT) ferroelectric solid solution is a promising candidate for high-temperature applications as it has a high piezoelectric response while also maintaining its ferroelectric phase until a high Curie temperature (T C ) of 650 °C. In this work, we investigate the piezoelectric mechanism in BFTM–xPT, a novel high-T C ferroelectric ceramic. To elucidate the origin of its enhanced piezoelectric performance, relative to other piezoceramics of similar T C , in situ electric field X-ray total scattering experiments were performed. Total scattering combines Bragg scattering (diffraction) and diffuse scattering (pair distribution function), providing insight on various length scales. With information spanning different length scales, extrinsic contributions (i.e., domain wall motion and interphase boundary motion) can be separated from intrinsic contributions (i.e., piezoelectric lattice strain). We show that, for compositions within the morphotropic phase boundary (MPB, x = 0.325), the piezoelectric response is dominated by intrinsic piezoelectric lattice strain, whereas outside the MPB (x = 0.375) the major component of the piezoelectric response is from extrinsic mechanisms including an electric-field-induced phase transition and tetragonal domain wall motion. This article reveals that the origin of piezoelectric response in BFTM–xPT is composition-dependent and shows that high-performance materials may also be located outside the MPB. These findings can help guide material design to optimize properties for specific applications.

Richtik, Brooke N. [University of Calgary, AB (Can↗
DOE OSTI2020

Structure and good piezoelectric performance in the complex system of Pb[(Zn,Ni)Nb]O 3 –Pb[(In,Yb)Nb]O 3 –Pb(Zr,Hf,Ti)O 3

High-performance piezoelectrics are always demanded for the high-end application. In this study, a complex piezoelectric system of 0.49Pb(Zn 1/2 Ni 1/2 ) 1/3 Nb 2/3 O 3 – x Pb(In 1/2 Yb 1/2 ) 1/2 Nb 1/2 O 3 –(0.51 – x )Pb(Zr 1/2 Hf 1/2 ) 0.1 Ti 0.9 O 3 (0.16 ≤ x ≤ 0.23) was fabricated through the solid-state method. The structure, ferroelectric, piezoelectric, and dielectric properties were investigated. The optimum piezoelectric coefficient d 33 of 761 pC/N, high Curie temperature of 169 °C, dielectric permittivity ( ε r ) of 4557, and electromechanical coupling coefficient ( k p ) of 63% were found at the morphotropic phase boundary composition of x = 0.19, which are superior to other complex piezoelectric materials. In particular, a significant large-signal d 33 * of 913 pm/V and low strain hysteresis (6%) was obtained in the temperature range of 20–170 °C. Temperature-dependent x-ray diffraction (XRD) has demonstrated that good temperature stability is put down to the structure stability. The agreement between the calculated lattice strain from in situ high-energy synchrotron XRD data and the macroscopic measurements suggests that the large lattice strain has a dominant contribution to the high piezoelectric response. The high piezoelectric performance and good temperature stability makes it potential for application.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effect of alloying BaTiO 3 with BiZn 1/2 Ti 1/2 O 3 on polarization reversal

Changes in the polarization state of ferroelectric materials are mediated through the motion of planar defects such as domain walls. The interplay between the two processes that enable the inversion of the macroscopic polarization in ferroelectric materials, non-180° (domain reorientation) and 180° (domain reversal), is not well understood. In this work, time-resolved x-ray diffraction was carried out during the application of an external electric field to investigate the dynamic electric-field response mechanisms of BaTiO 3 (BT) and BiZn 1/2 Ti 1/2 O 3 (BZT)-modified BT (0.94BT-0.06BZT). These data evidence that the incorporation of BZT into BT fundamentally alters what processes are activated to reorient the polarization by 180°. Polarization reversal in BT is achieved through direct inversion of spontaneous dipoles. However, the addition of BZT into BT promotes a two-step polarization reversal process (i.e., two consecutive non-180° reorientation events).

36 MATERIALS SCIENCE↗
DOE OSTI2022

The roles of kinematic constraint and diffusion in non-equilibrium solid state phase transformations of Ti-6Al-4V

A solid state phase transformation of Ti-6Al-4V was studied using high speed in situ x-ray diffraction measurements made during rapid cooling of a cold metal transfer arc weld bead deposited onto a water cooled substrate. Analysis of body centered cubic (BCC) and hexagonal close packed (HCP) lattices revealed an abrupt, nonlinear shift in the lattice parameters of both phases just after the HCP phase had nucleated. Postmortem transmission electron microscopy confirmed that V diffusion was mostly suppressed during cooling. Together, these results indicate that at this cooling rate of approximately 10 4 K/s, which is representative of cooling rates of many additive manufacturing and welding processes, kinematic coherency of the BCC–HCP interfaces gives rise to the anomalous lattice expansion and contraction behaviors of both phases during the initial nucleation and growth stages of (mostly) martensitic transformation from BCC to HCP; the role of diffusion in such lattice anomalies is shown to be minimal.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Pushing the heterometal doping limit while preserving long-lived charge separation in a Ti-based MOF photocatalyst

Here, this study explores the nature, dynamics, and reactivity of the photo-induced charge separated excited state in a Fe 3+ -doped titanium-based metal organic framework (MOF), xFeMIL125-NH 2 , as a function of iron concentration. The MOF is synthesized with doping levels x = 0.5, 1 and 2 Fe node sites per octameric Ti-oxo cluster and characterized by powder x-ray diffraction, UV-vis diffuse reflectance, atomic absorption, and steady state Fe K-edge X-ray absorption spectroscopy. For each doping level, time-resolved X-ray transient absorption spectroscopy studies confirm the electron trap site role of the Fe sites in the excited state. Time scan data reveal multiexponential decay kinetics for the charge recombination processes which extend into the microsecond range for all three concentrations. A series of dye photodegradation studies, based on the oxidative decomposition of Rhodamine B, demonstrates the reactivity of the charge separated excited state and the photocatalytic capacity of these MOF materials compared to traditional heterometal-doped semiconductor photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optimizing protic ionic liquid electrolyte for pre-intercalated Ti 3 C 2 T x MXene supercapacitor electrodes

Electrical double-layer capacitors (EDLCs) are of increasing importance in energy storage from renewable sources. The properties of the electrode and electrolyte materials influence the energy and power densities of EDLCs. We examined the specific capacitance and ion dynamics of a protic ionic liquid confined in pre-intercalated Ti 3 C 2 T x MXene. Our electrochemical measurements demonstrated that the creation of a protic ionic liquid, 1-butyl-3-H-imidazolium bis(trifluoromethanesulfonyl)imide (BuIMH-NTf2), using a mixture of ionic liquid, 1-butyl imidazole (BuIM), and salt, bis(trifluoromethanesulfonyl)imide (HNTf2), in a ratio of 0.8:0.2 led to the optimal capacitance. Remarkably, quasi-elastic neutron scattering measurements revealed increased particle mobility at this composition, attributed to the more efficient accumulation of BuIMH + on the electrode surface. This deposit of additional ions results in fewer BuIM molecules away from the surface, enhancing their mobility due to reduced crowding. This composition-dependent electrochemical behavior will guide the formulation of more efficient protic ionic liquid systems, enabling faster ion transport in energy storage devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anomalous magnetic noise in an imperfectly flat landscape in the topological magnet Dy 2 Ti 2 O 7

Noise generated by motion of charge and spin provides a unique window into materials at the atomic scale. From temperature of resistors to electrons breaking into fractional quasiparticles, “listening” to the noise spectrum is a powerful way to decode underlying dynamics. Here, we use ultrasensitive superconducting quantum interference device (SQUIDs) to probe the puzzling noise in a frustrated magnet, the spin-ice compound Dy 2 Ti 2 O 7 (DTO), revealing cooperative and memory effects. DTO is a topological magnet in three dimensions—characterized by emergent magnetostatics and telltale fractionalized magnetic monopole quasiparticles—whose real-time dynamical properties have been an enigma from the very beginning. We show that DTO exhibits highly anomalous noise spectra, differing significantly from the expected Brownian noise of monopole random walks, in three qualitatively different regimes: equilibrium spin ice, a “frozen” regime extending to ultralow temperatures, and a high-temperature “anomalous” paramagnet. We present several distinct mechanisms that give rise to varied colored noise spectra. In addition, we identify the structure of the local spin-flip dynamics as a crucial ingredient for any modeling. Thus, the dynamics of spin ice reflects the interplay of local dynamics with emergent topological degrees of freedom and a frustration-generated imperfectly flat energy landscape, and as such, it points to intriguing cooperative and memory effects for a broad class of magnetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗