Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Long-Term Aging in Miscible Polymer Nanocomposites

Here we find that the initial, solvent-cast state of nanoparticles (NPs) in a polymer matrix temporally evolves during thermal annealing such that, at steady state, NPs maximize their distance from each other subject to mass balance constraints. The observed timescales for this unexpected structural reorganization, as probed by small-angle X-ray scattering, are temperature-dependent and can be prohibitively large, especially at temperatures around and below 1.2Tg. X-ray photon correlation spectroscopy measurements during reorganization reveal that the collective NP dynamics slow down with annealing at constant temperature; this is accompanied by changes in the low-frequency regime in macroscopic viscoelastic measurements in equilibrated materials. By ruling out other potential sources for these effects (i.e., electrostatic interactions, adsorbed layers), we attribute these results to a long-ranged repulsive force between the NPs caused by fluctuations in the polymer phase, i.e., the "anti-Casimir" effect proposed by Obhukhov and Semenov [Long-range interactions in polymer melts: The anti-Casimir effect. Phys Rev Lett 2005, 95 (3), 038305]. Thus, our results highlight the important role of long-term, slow NP reorganization on the structure and, subsequently, the properties of polymer nanocomposites (PNCs), even in the case of nominally miscible polymer nanoparticle hybrids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Global Patterns and Controls of Nutrient Immobilization on Decomposing Cellulose in Riverine Ecosystems

Microbes play a critical role in plant litter decomposition and influence the fate of carbon in rivers and riparian zones. When decomposing low-nutrient plant litter, microbes acquire nitrogen (N) and phosphorus (P) from the environment (i.e., nutrient immobilization), and this process is potentially sensitive to nutrient loading and changing climate. Nonetheless, environmental controls on immobilization are poorly understood because rates are also influenced by plant litter chemistry, which is coupled to the same environmental factors. Here we used a standardized, low-nutrient organic matter substrate (cotton strips) to quantify nutrient immobilization at 100 paired stream and riparian sites representing 11 biomes worldwide. Immobilization rates varied by three orders of magnitude, were greater in rivers than riparian zones, and were strongly correlated to decomposition rates. In rivers, P immobilization rates were controlled by surface water phosphate concentrations, but N immobilization rates were not related to inorganic N. The N:P of immobilized nutrients was tightly constrained to a molar ratio of 10:1 despite wide variation in surface water N:P. Immobilization rates were temperature-dependent in riparian zones but not related to temperature in rivers. However, in rivers nutrient supply ultimately controlled whether microbes could achieve the maximum expected decomposition rate at a given temperature. Collectively, we demonstrated that exogenous nutrient supply and immobilization are critical control points for decomposition of organic matter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Anharmonicity in partially filled skutterudites Yb x Co 4 Sb 12

Here, we report an experimental investigation of Yb filler ion dynamics in partially filled skutterudite samples Yb x Co 4 Sb 12 ( x = 0.26 and x = 0.4). From extended x-ray absorption fine structure (EXAFS) measurements at the Yb L 2 -edge, the mean-square displacements of the Yb fillers were extracted over a wide temperature range from 10 to 500 K. We found that the low-temperature dynamics of Yb fillers are described well using a harmonic oscillator approximation with Einstein temperatures of 70 ± 5 K for both samples. This finding is consistent with the observed low-energy phonon mode at 5.3(5) meV in the inelastic x-ray scattering (IXS) data. However, the temperature dependence deviates from the harmonic approximation at high temperatures due to significant cubic anharmonicity, which was revealed in the EXAFS cumulant analysis. Our study also demonstrates that complementary information on filler dynamics in skutterudites can be acquired using EXAFS and IXS.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Irradiation damage concurrent challenges with RAFM and ODS steels for fusion reactor first-wall/blanket: a review

Reduced activation ferritic martensitic (RAFM) and oxide dispersion strengthened (ODS) steels are the most promising candidates for fusion first-wall/blanket (FW/B) structures. The performance of these steels will deteriorate during service due to neutron damage and transmutation-induced gases, such as helium/hydrogen, at elevated operating temperatures. Here, after highlighting the operating conditions of fusion reactor concepts and a brief overview, the main irradiation-induced degradation challenges associated with RAFM/ODS steels are discussed. Their long-term degradation scenarios such as (a) low-temperature hardening embrittlement (LTHE)—including dose-temperature dependent yield stress, tensile elongations, necking ductility, test temperature effect on hardening, Charpy impact ductile-to-brittle transition temperature and fracture toughness, (b) intermediate temperature cavity swelling, (c) the effect of helium on LTHE and cavity swelling, (d) irradiation creep and (e) tritium management issues are reviewed. The potential causes of LTHE are discussed, which highlights the need for advanced characterisation techniques. The mechanical properties, including the tensile/Charpy impact of RAFM and ODS steels, are compared to show that the current generation of ODS steels also suffers from LTHE, and shows irradiation hardening up to high temperatures of ~400 °C–500 °C. To minimise this, future ODS steel development for FW/B-specific application should target materials with a lower Cr concentration (to minimise α'), and minimise other elements that could form embrittling phases under irradiation. RAFM steel-designing activities targeting improvements in creep and LTHE are reviewed. The need to better understand the synergistic effects of helium on the thermo-mechanical properties in the entire temperature range of FW/B is highlighted. Because fusion operating conditions will be complex, including stresses due to the magnetic field, primary loads like coolant pressure, secondary loads from thermal gradients, and due to spatial variation in damage levels and gas production rates, an experimentally validated multiscale modelling approach is suggested as a pathway to future reactor component designing such as for the fusion neutron science facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Spatiotemporal Crossover between Low- and High-Temperature Dynamical Regimes in the Quantum Heisenberg Magnet

The stranglehold of low temperatures on fascinating quantum phenomena in one-dimensional quantum magnets has been challenged recently by the discovery of anomalous spin transport at high temperatures. Whereas both regimes have been investigated separately, no study has attempted to reconcile them. For instance, the paradigmatic quantum Heisenberg spin-$1/2$ chain falls at low-temperature within the Tomonaga-Luttinger liquid framework, while its high-temperature dynamics is superdiffusive and relates to the Kardar-Parisi-Zhang universality class in $1+1$ dimensions. This work aims at reconciling the two regimes. Building on large-scale matrix product state simulations, we find that they are connected by a temperature-dependent spatiotemporal crossover. In this work, as the temperature $T$ is reduced, we show that the onset of superdiffusion takes place at longer length and time scales $\propto 1/T$. This prediction has direct consequences for experiments including nuclear magnetic resonance: it is consistent with earlier measurements on the nearly ideal Heisenberg $S=1/2$ chain compound Sr$_2$CuO$_3$ yet calls for new and dedicated experiments.

1-dimensional spin chains↗
DOE OSTI2025

Spin-strain interactions under hydrostatic pressure in α-RuCl 3

We investigate the effects of hydrostatic pressure on 𝛼−RuCl 3 , a prototypical material for the Kitaev spin model on a honeycomb lattice with a possible spin-liquid ground state. Using ultrasound measurements at pressures up to 1.16 GPa, we reveal significant modifications of the acoustic properties and the 𝐻−𝑇 phase diagram of this material. Hydrostatic pressure suppresses the three-dimensional magnetic order and induces a dimerization transition at higher pressures. At low pressures, the sound attenuation exhibits a linear temperature dependence, while above 0.28 GPa, it becomes nearly temperature independent, suggesting a shift in the phonon scattering regime dominated by Majorana fermions. These findings provide new insights into spin-strain interactions in Kitaev magnets and deliver a detailed characterization of the 𝐻−𝑇 phase diagram of 𝛼−RuCl 3 under hydrostatic pressure.

Focused ion beam↗
DOE OSTI2022

Temperature and Dynamic Strain Measurements Using a Single SAWR Sensor

Dynamic strain sensing is relevant in numerous applications involving structural health monitoring, condition-based maintenance, operation efficiency preservation, and work environment safety. These sensors are particularly critical for high-temperature (HT) harsh-environment (HE) industries such as aerospace, automotive, power plants, and advanced manufacturing. In HT/HE, sensor implementation and measurement present challenges such as maintaining sensor stability, accounting for temperature cross-sensitivity, providing HT attachment, and packaging of the sensors and system. Surface acoustic wave resonator (SAWR) sensors can address these needs and offer additional benefits such as compact size and wireless interrogation capability. The SAWR sensitivity to dynamic strain is temperature dependent, making it necessary to measure the sensor temperature in order to use the correct dynamic strain calibration curve. In this work, a method for determining the temperature, dynamic strain magnitude, and dynamic strain spectral components using a single SAWR sensor is presented. Here, the established technique for determining operational temperature and dynamic strain magnitude/spectral components using only one SAWR simplifies the sensor measurement system, thus being very attractive for HT /HE applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Pristine quantum criticality in a Kondo semimetal

The observation of quantum criticality in diverse classes of strongly correlated electron systems has been instrumental in establishing ordering principles, discovering new phases, and identifying the relevant degrees of freedom and interactions. At focus so far have been insulators and metals. Semimetals, which are of great current interest as candidate phases with nontrivial topology, are much less explored in experiments. Here, we study the Kondo semimetal CeRu 4 Sn 6 by magnetic susceptibility, specific heat, and inelastic neutron scattering experiments. The power-law divergence of the magnetic Grünesien ratio reveals that, unexpectedly, this compound is quantum critical without tuning. The dynamical energy over temperature scaling in the neutron response throughout the Brillouin zone and the temperature dependence of the static uniform susceptibility, indicate that temperature is the only energy scale in the criticality. Such behavior, which has been associated with Kondo destruction quantum criticality in metallic systems, could be generic in the semimetal setting.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Optimization of the light detection system of the ICARUS detector

The Short Baseline Neutrino (SBN) Program at Fermilab is designed to investigate short-baseline neutrino oscillations and test the hypothesis of sterile neutrinos, motivated by several experimental anomalies observed over the past decades. Within this program, the ICARUS experiment plays a key role. It employs the world’s largest Liquid Argon Time Projection Chamber (LArTPC) and serves as the farthest and most sensitive SBN detector for studying muon and electron neutrino oscillations. A crucial subsystem of the ICARUS detector is the Light Detection System (LDS), which captures the prompt scintillation light produced by neutrino interactions in the 600-ton active liquid Argon volume. This system provides precise timing information that is essential for event reconstruction, the trigger system, and cosmic background rejection. The LDS is composed of 360 Hamamatsu R5912-MOD 8-inch photomultiplier tubes (PMTs), operating under cryogenic conditions ($\sim 87 \ K$) inside the detector’s cryostats. During the detector’s operation at FNAL, a degradation in PMT gain has been observed, attributed to aging under low-temperature conditions. In collaboration with ICARUS teams from INFN Pavia and Catania, I developed an experimental setup to study the temperature-dependent behavior of the PMTs, performing gain measurements both at room temperature and down to $-70°C$ using a climatic chamber at INFN Catania. The results indicate that while the PMTs maintain stable gain at room temperature, a significant and permanent gain reduction occurs at low temperatures. Although $-70°C$ is still warmer than liquid Argon temperatures, the findings clearly demonstrate a gain-dependent performance degradation. The thesis also discusses mitigation strategies implemented in the ICARUS detector to address this issue and presents a simplified model to describe and simulate the observed behavior.

Saia, Clara [Catania U.] (ORCID:0009000464102417)↗
DOE OSTI2024

Isotope effects in supercooled H 2 O and D 2 O and a corresponding-states-like rescaling of the temperature and pressure

Water shows anomalous properties that are enhanced upon supercooling. The unusual behavior is observed in both H 2 O and D 2 O, however, with different temperature dependences for the two isotopes. It is often noted that comparing the properties of the isotopes at two different temperatures (i.e., a temperature shift) approximately accounts for many of the observations—with a temperature shift of 7.2 K in the temperature of maximum density being the most well-known example. However, the physical justification for such a shift is unclear. Motivated by recent work demonstrating a “corresponding-states-like” rescaling for water properties in three classical water models that all exhibit a liquid–liquid transition and critical point, the applicability of this approach for reconciling the differences in the temperature- and pressure-dependent thermodynamic properties of H 2 O and D 2 O is investigated here. Utilizing previously published data and equations-of-state for H 2 O and D 2 O, we show that the available data and models for these isotopes are consistent with such a low temperature correspondence. These observations provide support for the hypothesis that a liquid–liquid critical point, which is predicted to occur at low temperatures and high pressures, is the origin of many of water’s anomalies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Thermal tolerance of perovskite quantum dots dependent on A-site cation and surface ligand

A detailed picture of temperature dependent behavior of Cs x FA 1-x PbI 3 perovskite quantum dots across the composition range is constructed by performing in situ optical spectroscopic and structural measurements, supported by theoretical calculations that focus on the relation between A-site chemical composition and surface ligand binding. The thermal degradation mechanism depends not only on the exact chemical composition, but also on the ligand binding energy. The thermal degradation of Cs-rich perovskite quantum dots is induced by a phase transition from black γ-phase to yellow δ-phase, while FA-rich perovskite quantum dots with higher ligand binding energy directly decompose into PbI 2 . Quantum dot growth to form large bulk size grain is observed for all Cs x FA 1-x PbI 3 perovskite quantum dots at elevated temperatures. In addition, FA-rich quantum dots possess stronger electron-longitudinal optical phonon coupling, suggesting that photogenerated excitons in FA-rich quantum dots have higher probability to be dissociated by phonon scattering compared to Cs-rich quantum dots.

14 SOLAR ENERGY↗
DOE OSTI2022

Understanding the Role of Order in Y‐Series Non‐Fullerene Solar Cells to Realize High Open‐Circuit Voltages

Abstract Non‐fullerene acceptors (NFAs) as used in state‐of‐the‐art organic solar cells feature highly crystalline layers that go along with low energetic disorder. Here, the crucial role of energetic disorder in blends of the donor polymer PM6 with two Y‐series NFAs, Y6, and N4 is studied. By performing temperature‐dependent charge transport and recombination studies, a consistent picture of the shape of the density of state distributions for free charges in the two blends is developed, allowing an analytical description of the dependence of the open‐circuit voltage V OC on temperature and illumination intensity. Disorder is found to influence the value of the V OC at room temperature, but also its progression with temperature. Here, the PM6:Y6 blend benefits substantially from its narrower state distributions. The analysis also shows that the energy of the equilibrated free charge population is well below the energy of the NFA singlet excitons for both blends and possibly below the energy of the populated charge transfer manifold, indicating a down‐hill driving force for free charge formation. It is concluded that energetic disorder of charge‐separated states has to be considered in the analysis of the photovoltaic properties, even for the more ordered PM6:Y6 blend.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Additively manufactured polymer composites for heat exchanger applications: evaluation of critical thermophysical properties

Polymeric heat exchangers (PHXs) have been used in applications involving weight restrictions, chemical compatibility, and fouling issues. Additive manufacturing (AM) or 3D printing provide new solutions to previously inaccessible combinations of properties and geometries. There are some advancements in the PHXs by AM; however, the process and the properties of materials still need further investigation to improve the overall performance. In this study, additively manufactured polyethylene terephthalate glycol (PETG) composites reinforced with graphite and pitch-based carbon fibers were evaluated for their potential application as PHXs. The thermal conductivity, volumetric heat capacity, coefficient of thermal expansion, creep behavior, and long-term performance were studied in detail. Our results reveal that the composites have an anisotropic thermal conductivity. The thermal conductivity along the printing direction is higher than the layer building direction due to the shear-induced alignment of the fillers. The printed composites achieve good thermal stability with 80% lower CTE at room temperature than neat PETG. Creep tests suggest the creep and creep recovery were highly temperature-dependent, and the deformation can be recovered when the temperature is below glass transition. These results suggest additive manufactured composites be potentially used for heat exchanger applications at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Temperature Inhibition of Plasma-Driven Methane Conversion in DBD Systems

Low-temperature non-thermal plasmas produce highly reactive chemical environments made up of electrons, ions, radicals, and vibrationally excited molecules. These reactive species, when combined with catalysts, can help drive thermodynamically unfavorable chemical reactions at low temperatures and atmospheric pressure. The conversion of methane (CH 4 ) to produce other value-added chemicals is a good model system because of its applicability to a wide range of industries. To effectively create these plasma catalytic systems, a fundamental understanding of the plasma-phase chemistry alone is imperative. While there have been many studies on methane plasmas and how certain operating conditions (i.e., gas composition and power) affect the plasma, there is limited understanding on how changing bulk reaction temperature affects the plasma properties and ensuing plasma chemistry. Here, in this work, we use a dielectric barrier discharge to investigate the effects of temperature on the reaction chemistry and the plasma’s electrical properties in various methane-gas mixtures. Results show that increasing temperature leads to a reduction in methane conversion as well as changes to both the gas and dielectric material pre-breakdown, which manifests itself in temperature-dependent electrical properties of the plasma. Experiments at various temperatures and power show a positive correlation between key electrical plasma properties (average charge and lifetime per filament) and the measured methane conversion as a function of temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Turbulence-induced bias in time-averaged laser absorption tomography of correlated concentration and temperature fields with a first-order correction

The influence of correlated scalar fluctuations on time-averaged laser absorption tomography measurements of temperature and species in a piloted turbulent premixed flame was examined using a coupled spectroscopic and fluid-dynamic analysis. To understand bias associated with turbulence, spatio-temporally resolved temperature and species mole fraction profiles predicted by large eddy simulations (LES) were used to synthetically generate time-resolved line-of-sight absorption measurements at short time scales (microsecond) to reflect the unsteady nature of a canonical jet burner across various transverse measurement planes. Inversion methods were employed on the time-averaged line-of-sight data to produce radially-resolved temperature and mole fraction profiles, analogous to those produced by laser absorption tomography performed on a time-averaged axisymmetric flowfield. It is shown that bias in the measurements compared to true time-averaged scalar fields is a function primarily of temperature dependence in absorptivity and non-zero correlation between temperature and species concentration scalars. Finally, a first-order correction to tomography measurements is proposed to account for the bias based on estimated correlations and the known spectroscopic parameters of the probed absorption transitions.

42 ENGINEERING↗
DOE OSTI2022

Eu 5 Al 3 Sb 6 : Al 4 Tetrahedra Embedded in a Rock-Salt-Like Structure

The new Eu 5 Al 3 Sb 6 phase has been successfully synthesized as a pure phase through Sn flux methods yielding large, high-quality crystals. This structure type features disordered Al clusters that appear in the form of dual tetrahedra. It crystallizes in the monoclinic C2/m space group exhibiting a rock-salt-like Eu–Sb framework with [Al 4 ] tetrahedra replacing some of the cationic Eu atoms (space group: C2/m, a = 8.151(1) Å, b = 14.181(2) Å, c = 8.145(1) Å, β = 109.577(2)°). The structure models the [Al 4 ] as dual tetrahedra with the Al atom sites 37.5% occupied along with Eu present on the central site at 8% occupancy and the remainder of the site being vacant. The presence of the [Al 4 ] cluster is further supported by HRTEM. Electronic structure calculations show that this material is a semimetal with observed band crossings close to the Fermi level. Strong Al–Sb antibonding interactions were found from COHP calculations close to the Fermi level and provide the rationale for the deficiency of the Al cluster. Mössbauer spectroscopy on Eu-151 and Sb-121 provides oxidation states of 2+ and 3– along with the local environment. Magnetic susceptibility measurements can be described well with a Curie–Weiss law where an effective moment of 7.80 μB/mol Eu is obtained, consistent with Eu 2+ , and show canted antiferromagnetic behavior below 10 K. Temperature dependent resistivity shows a Kondo-like low-temperature upturn caused by enhanced scattering of the itinerant electrons with the 4f orbitals of Eu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Using Hyperoptimized Tensor Networks and First-Principles Electronic Structure to Simulate the Experimental Properties of the Giant {Mn 84 } Torus

The single-molecule magnet {Mn 84 } is a challenge to theory because of its high nuclearity. Here, we directly compute two experimentally accessible observables, the field-dependent magnetization up to 75 T and the temperature-dependent heat capacity, using parameter-free theory. In particular, we use first-principles calculations to derive short- and long-range exchange interactions and compute the exact partition function of the resulting classical Potts and Ising spin models for all 84 Mn S = 2 spins to obtain observables. The latter computation is made possible by using hyperoptimized tensor network contractions, a technique developed to simulate quantum supremacy circuits. We also synthesize the magnet and measure its heat capacity and magnetization, observing qualitative agreement between theory and experiment and identifying an unusual bump in the heat capacity and a plateau in the magnetization. Our work also identifies some limitations of current theoretical modeling in large magnets, such as sensitivity to small, long-range exchange couplings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A trapping tolerant drain current based temperature measurement of β -Ga 2 O 3 MOSFETs

The drain current temperature dependence is an efficient way to determine the channel temperature in semiconductor devices; however, it has been challenging to use due to the potential interference of trapping effects. A trapping tolerant method is proposed, illustrated here for Ga 2 O 3 MOSFETs, making in situ temperature measurements possible, allowing a thermal resistance of 59 K∙mm/W to be measured in Ga 2 O 3 MOSFETs. However, neglecting the effect of trapping causes an error of ~15% in the channel temperature measured using the drain current. 3D simulations show that the measured channel temperature is the average temperature value between source and drain contact.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗