Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Verification and transfer of thermal pollution model. Volume 6: User's manual for 1-dimensional numerical model

The six-volume report: describes the theory of a three dimensional (3-D) mathematical thermal discharge model and a related one dimensional (1-D) model, includes model verification at two sites, and provides a separate user's manual for each model. The 3-D model has two forms: free surface and rigid lid. The former, verified at Anclote Anchorage (FL), allows a free air/water interface and is suited for significant surface wave heights compared to mean water depth; e.g., estuaries and coastal regions. The latter, verified at Lake Keowee (SC), is suited for small surface wave heights compared to depth (e.g., natural or man-made inland lakes) because surface elevation has been removed as a parameter.

Lee, S. S.↗

Investigation of optical/infrared sensor techniques for application satellites

A method of scanning an optical sensor array by acoustic surface waves is discussed. Data cover detailed computer based analysis of the operation of a multielement acoustic surface-wave-scanned optical sensor, the development of design and operation techniques that were used to show the feasibility of an integrated array to design several such arrays, and experimental verification of a number of the calculations with discrete sensor devices.

Kaufman, I.↗

A chain of winking (oscillating) filaments triggered by an invisible extreme-ultraviolet wave

Winking (oscillating) filaments have been observed for many years. However, observations of successive winking filaments in one event have not yet been reported. In this paper, we present the observations of a chain of winking filaments and a subsequent jet that are observed right after the X2.1 flare in AR11283. The event also produced an extreme-ultraviolet (EUV) wave that has two components: an upward dome-like wave (850 km s{sup –1}) and a lateral surface wave (554 km s{sup –1}) that was very weak (or invisible) in imaging observations. By analyzing the temporal and spatial relationships between the oscillating filaments and the EUV waves, we propose that all the winking filaments and the jet were triggered by the weak (or invisible) lateral surface EUV wave. The oscillation of the filaments last for two or three cycles, and their periods, Doppler velocity amplitudes, and damping times are 11-22 minutes, 6-14 km s{sup –1}, and 25-60 minutes, respectively. We further estimate the radial component magnetic field and the maximum kinetic energy of the filaments, and they are 5-10 G and ∼10{sup 19} J, respectively. The estimated maximum kinetic energy is comparable to the minimum energy of ordinary EUV waves, suggesting that EUV waves can efficiently launch filament oscillations on their path. Based on our analysis results, we conclude that the EUV wave is a good agent for triggering and connecting successive but separated solar activities in the solar atmosphere, and it is also important for producing solar sympathetic eruptions.

79 ASTRONOMY AND ASTROPHYSICS↗

Microwave N{sub 2}-Ar plasma torch. II. Experiment and comparison with theory

Spatially resolved emission spectroscopy techniques have been used to determine the gas temperature, the electron, and N{sub 2}{sup +} ion densities and the relative emission intensities of radiative species in a microwave (2.45 GHz) plasma torch driven by a surface wave. The experimental results have been analyzed in terms of a two-dimensional theoretical model based on a self-consistent treatment of particles kinetics, gas dynamics, and wave electrodynamics. The measured spatial variations in the various quantities agree well with the model predictions. The radially averaged gas temperature is around 3000 K and varies only slowly along the discharge zone of the source but it drops sharply down to about 400 K in the postdischarge. The experimental wave dispersion characteristics nearly follow the theoretical ones, thus confirming that this plasma source is driven by a surface wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microscale ocean dynamics

The detailed dynamics of the micro-scale ocean surface phenomena are studied along with the relationships among the surface signatures with the underlying dynamical processes. The approach to advance the understanding in this area is as follows: (1) Conduct rigorous theoretical studies of the ocean surface wave dynamics and statistical properties; (2) Conduct process-oriented laboratory experiments to verify the theoretical results, and to provide guidance for further studies; and (3) Prepare testable hypotheses for field verifications and comparisons during the ONR/NASA sponsored Surface Wave Dynamics Experiment (SWADE). An analytic model was established for wave breaking probability to study the influence of wave breaking on the spectrum shape in both deep and finite-depth waters. The spectrum was processed along with the structures of the water surface under the influence of wind and existing waves.

Huang, N.↗

Determining bonding, thickness, and density via thermal wave impedance NDE

Bonding, density, and thickness of coatings have a vital effect on their performance in many applications. Pioneering development work on thermal wave nondestructive evaluation (NDE) methods during the past 25 years has resulted in an array of useful techniques for performing bonding, density, and thickness measurements in a practical shop environment. The most useful thermal wave methods for this purpose are based on thermal wave surface impedance measurement or scanning. A pulse of heat from either a thermal transducer or a hot gas pulse is projected onto the surface, and the resulting temperature response is analyzed to unfold the bonding, density, and thickness of the coating. An advanced emissivity independent infrared method was applied to detect the temperature response. These methods were recently completely computerized and can automatically provide information on coating quality in near real-time using the proper equipment. Complex shapes such as turbine blades can be scanned. Microscopic inhomogeneities such as microstructural differences and small, normal, isolated voids do not cause problems but are seen as slight differences in the bulk thermal properties. Test objects with rough surfaces can be effectively nondestructively evaluated using proper thermal surface impedance methods. Some of the basic principles involved, as well as metallographic results illustrating the ability of the thermal wave surface impedance method to detect natural nonbonds under a two-layer thermally sprayed coating, will be presented.

Green, D. R.↗

Numerical Analysis of Liquid Metal MHD Flow and Heat Transfer for Open-Surface Li Divertor in FNSF

Within the ongoing U.S.-based program on the development of liquid metal plasma-facing components, numerical simulations and analyses are performed to address the feasibility of the open-surface Li divertor. In the previous scoping studies (Smolentsev, 2021), heat-removal capabilities of the divertor were assessed using a simplified flow model for a slug-type velocity profile and constant flow thickness. Here, new analyses take into account forces acting on the flowing Li layer. Three reduced-order mathematical models are applied under the conditions of the U.S. Fusion Nuclear Science Facility (FNSF) to access magnetohydrodynamic (MHD) flow development effects, velocity distribution, and surface waves: 1) fully developed MHD flow; 2) quasi-2-D developing MHD flow; and 3) multiphase MHD flow. The obtained results for MHD flows and the surface heat flux computed with the plasma code scrape-off layer plasma simulation for ITER (SOLPS-ITER) are then used as input data to compute the temperature distribution in the divertor by solving the convection–diffusion energy equation.

Smolentsev, Sergey↗

Surface and internal ocean wave observations

The physical characteristics of the ocean surface waves are discussed, together with the prinicples behind altimetry measurements of the wave height and SAR measurements of surface wave direction and length. In addition, theoretical aspects of oceanic internal gravity waves are presented, and the measurements of oceanic internal wave fields, using the 'surface signatures' accompanying the underlying oscillations, are described. Results of the surface wave measurements obtained by the Seasat altimeter and SAR are presented along with inferred internal wave results obtained by SAR.

Rufenach, C. L.↗

Rayleigh Wave Propagation in the Bighorn Mountains Region, Wyoming

Short-period Rayleigh waves, Rg , provide strong constraints on the depth of shallow seismic events and are of interest for monitoring small explosions. Characterizing the seismic sources that generate Rg requires an understanding of how shallow crustal structure affects Rayleigh wave propagation. Here, in support of these efforts, this study utilizes observed waveforms from small shallow explosions recorded on temporary seismic network deployments in the Bighorn region, Wyoming. We study regional near-surface geology by measuring changes in surface-wave amplitude and polarization during propagation through basins, foothills, and mountains. We develop additional insight by carrying out surface-wave eigenfunction analyses and numerical-wave simulations, which together reproduce many characteristics seen in the observed waveforms. Our results show how sedimentary basins in the Bighorn region allow for amplified prograde-polarized higher-mode and retrograde-polarized fundamental-mode Rayleigh waves, whereas adjacent mountains only support retrograde motion. These different modes provide distinct constraints on the Earth structure and source characteristics, potentially enabling targeted inversions in future studies. Finally, our findings provide insight into Rg propagation through complex near-surface geology, improving our understanding of shallow propagation and source effects that are relevant to explosion monitoring efforts.

58 GEOSCIENCES↗

Considerations for millimeter wave printed antennas

Calculated data are presented on the performance of printed antenna elements on substrates which may be electrically thick, as would be the case for printed antennas at millimeter wave frequencies. Printed dipoles and microstrip patch antennas on polytetrafluoroethylene (PTFE), quartz, and gallium arsenide substrates are considered. Data are given for resonant length, resonant resistance, bandwidth, loss due to surface waves, loss due to dielectric heating, and mutual coupling. Also presented is an optimization procedure for maximizing or minimizing power launched into surface waves from a multielement printed antenna array. The data are calculated by a moment method solution.

Pozar, D. M.↗

Residual stress measurement and analysis using ultrasonic techniques.

A technique which utilizes ultrasonic radiation has been developed to measure residual stresses in metals. This technique makes it possible to detect and measure the magnitude of the principle stresses and also to obtain their direction. The velocities of ultrasonic waves in materials are measured as the time to travel a fixed path length, and the change in transit time is related to the applied stress. The linear relationship obtained allows a procedure based on this principle to be used for the measurement of residual stress using surface waves and shear waves. A method for plotting stress profiles through a material using surface waves uses varying frequencies for the ultrasonic wave. A limitation of the shear wave method is considered. The system used for this technique is called the Modified Time of Flight System.

Noronha, P. J.↗

Aftershocks of the 2012 Off-Coast of Sumatra Earthquake Sequence

Aftershocks of the 2012 Off-Coast of Sumatra Earthquake Sequence exhibit a complex and diffuse spatial distribution. The first-order complexity in aftershock distribution is clear and well beyond the influence of typical earthquake location uncertainty. The sequence included rupture of multiple fault segments, spatially separated. We use surface-wave based relative centroid locations to examine whether, at the small scale, the distribution of the aftershocks was influenced by location errors. Surface-wave based relative location has delineated precise oceanic transform fault earthquake locations in multiple regions. However, the relocated aftershocks off the coast of Sumatra seldom align along simple linear trends that are compatible with the corresponding fault strikes as estimated for the GCMT catalog. The relocation of roughly 60 moderate-earthquake epicentroids suggests that the faulting involved in the 2012 earthquake aftershock sequence included strain release along many short fault segments. Statistical analysis and temporal variations of aftershocks show a typical decay of the aftershocks but a relatively low number of aftershocks, as is common for intraplate oceanic earthquakes. Coulomb stress calculations indicate that most of the moderate-magnitude aftershocks are compatible with stress changes predicted by the large-event slip models. Furthermore the patterns in the aftershocks suggest that the formation of the boundary and eventual localization of deformation between the Indian and Australian plate is a complicated process.

2012 Sumatra Earthquake↗

Verification and transfer of thermal pollution model. Volume 2: User's manual for 3-dimensional free-surface model

The six-volume report: describes the theory of a three-dimensional (3-D) mathematical thermal discharge model and a related one-dimensional (1-D) model, includes model verification at two sites, and provides a separate user's manual for each model. The 3-D model has two forms: free surface and rigid lid. The former, verified at Anclote Anchorage (FL), allows a free air/water interface and is suited for significant surface wave heights compared to mean water depth; e.g., estuaries and coastal regions. The latter, verified at Lake Keowee (SC), is suited for small surface wave heights compared to depth. These models allow computation of time-dependent velocity and temperature fields for given initial conditions and time-varying boundary conditions.

Lee, S. S.↗

One pot synthesis of nanosized anion doped TiO{sub 2}: Effect of irradiation of sound waves on surface morphology and optical properties

Commercialization of AOP’s for remediation of pollutants from environmental matrix required the process to be operated by solar light. Semiconductor TiO{sub 2} has emerged as an effective and preferred photocatalyst in the field of environmental photocatalysis due to its; (i) biological and chemical inertness (ii) resistance to chemical and photo corrosion, (iii) can absorb natural UV light due to appropriate energetic separation between its valence and conduction band. However, unfortunately the optical band gap of TiO{sub 2} (3.0-3.23 eV) with absorption cut off ∼ 380 nm, enables it to harness only a small fraction (∼ 5%) of the entire solar spectrum. One of the current areas of research is modification of TiO{sub 2} photocatalyst. In present paper one pot greener synthesis from titanium isopropoxide and hydroxylamine hydrochloride has been used as titanium and nitrogen precursor under ultrasonic waves. The as synthesized TiO{sub 2} nanomaterials were dried at 100°C and further calcinated at different temperatures. The effect of reaction parameters such as ultrasonication time on the yield, surface morphology, spectroscopic data and optical properties was also investigated. The results confirm that the anatase phase is a main phase with a crystallite size of 35-77 nm and the calculated band gap of nanomaterials varies from 2.10-3.1 eV.

36 MATERIALS SCIENCE↗

Simulation of asteroid impact on ocean surfaces, subsequent wave generation and the effect on US shorelines

As part of a larger effort involving members of several other organizations, we have conducted numerical simulations in support of emergency-response exercises of postulated asteroid ocean impacts. We have addressed the problem from source (asteroid entry) to ocean impact (splash) to wave generation, propagation and interaction with the U.S. shoreline. We simulated three impact sites. The first site is located off the east coast by Maryland's shoreline. The second site is located off of the West coast, the San Francisco bay. The third set of sites are situated in the Gulf of Mexico. Asteroid impacts on the ocean surface are conducted using LLNL's hydrocode GEODYN to create the impact wave source for the shallow water wave propagation code, SWWP, a shallow depth averaged water wave code.

58 GEOSCIENCES↗

Resonant Alfven wave heating of the plasma sheet boundary layer

The exchange of energy between the plasma mantle and the plasma sheet boundary layer (PSBL) is examined with a one-dimensional magnetotail model. The energy exchange occurs via Poynting flux generated by the localized mode conversion of a surface wave to an Alfven wave. This Poynting flux propagates through the lobe and into the PSBL where it is absorbed by two processes. The first arises from a gradient in the plasma beta causing a smooth absorption of Poynting flux. The second process results from the localized mode conversion of the decaying surface wave to an Alfven wave, causing a localized absorption of energy. A numerical solution of the linearized ideal MHD equations is obtained by assuming an adiabatic equation of state.

Harrold, B. G.↗

The possible role of high-frequency waves in heating solar coronal loops

We investigate the role of high-frequency waves in the heating of solar active region coronal loops. We assume a uniform background magnetic field, and we introduce a density stratification in a direction perpendicular to this field. We focus on ion compressive viscosity as the damping mechanism of the waves. We incorporate viscosity self-consistently into the equations, and we derive a dispersion relation by adopting a slab model, where the density inside the slab is greater than that outside. Such a configuration supports two types of modes: surface waves and trapped body waves. In order to determine under what conditions these waves may contribute to the heating of active regions, we solve our dispersion relation for a range of densities, temperatures, magnetic field strengths, density ratios, wavevector magnitudes, wavevector ratios, and slab widths. We find that surface waves exhibit very small damping, but body waves can potentially damp at rates needed to balance radiative losses. However, the required frequencies of these body waves are very high. For example, the wave frequency must be at least 5.0/s for a slab density of 10(exp 9,5)/cc, a slab temperature of 10(exp 6,5) K, a field strength of 100 G, and a density ratio of 5. For a slab density of 10(exp 10)/cc, this frequency increases to 8.8/s. Although these frequencies are very high, there in no observational evidence to rule out their existence, and they may be generated both below the corona and at magnetic reconnection sites in the corona. However, we do find that, for slab densities of 10(exp 10)/cc or less, the dissipation of high-frequency waves will be insufficient to balance the radiative losses if the magnetic field strength exceeds roughly 200 G. Because the magnetic field is known to exceed 200 G in many active region loops, particularly low-lying loops and loops emanating from sunspots, it is unlikely that high-frequency waves can provide sufficient heating in these regions.

Porter, Lisa J.↗