Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Three-dimensional kinematic reconnection in the presence of field nulls and closed field lines

The present investigation of three-dimensional reconnection of magnetic fields with nulls and of fields with closed lines gives attention to the geometry of the former, with a view to their gamma-line and Sigma-surface structures. The geometric structures of configurations with a pair of type A and B nulls permit reconnection across the null-null lines; these are the field lines which join the two nulls. Also noted is the case of magnetostatic reconnection, in which the magnetic field is time-independent and the electrostatic potential is constant along field lines.

Lau, Yun-Tung↗

Interactive wall turbulence control

After presenting boundary layer turbulence physics in a manner that emphasizes the possible modification of structural surfaces in a way that locally alters the production of turbulent flows, an account is given of the hardware that could plausibly be employed to implement such a turbulence-control scheme. The essential system components are flow sensors, electronic processors, and actuators; at present, actuator technology presents the greatest problems and limitations. High frequency/efficiency actuators are required to handle three-dimensional turbulent motions whose frequency and intensity increases in approximate proportion to freestream speed.

Wilkinson, Stephen P.↗

Coagulation of particles in Saturn's rings - Measurements of the cohesive force of water frost

Experimental data are presented on the sticking force of water ice particles which are indicative of the role that the cohesive properties of such particles could play in the dynamics of Saturn ring particles. Sticking forces are dependent on particle impact velocities; a 'Velcro' model is devised to describe the surface structure involved in sticking. The data indicate that below the critical impact velocity of about 0.03 cm/sec, particle cohesion always occurs. Due to the optical depth of micron-sized grains in the Saturn rings, particles are hypothesized to be coated with a layer of frost which will render cohesion an important ring-dynamics process.

Hatzes, A. P.↗

Diffractive optics technology and the NASA Geostationary Earth Observatory (GEO)

Diffractive (or binary) optics offers unique capabilities for the development of large-aperture, high-performance, light-weight optical systems. The Geostationary Earth Observatory (GEO) will consist of a variety of instruments to monitor the environmental conditions of the earth and its atmosphere. The aim of this investigation is to analyze the design of the GEO instrument that is being proposed and to identify the areas in which diffractive (or binary) optics technology can make a significant impact in GEO sensor design. Several potential applications where diffractive optics may indeed serve as a key technology for improving the performance and reducing the weight and cost of the GEO sensors have been identified. Applications include the use of diffractive/refractive hybrid lenses for aft-optic imagers, diffractive telescopes for narrowband imaging, subwavelength structured surfaces for anti-reflection and polarization control, and aberration compensation for reflective imaging systems and grating spectrometers.

Morris, G. Michael↗

A video-aided study of sea spikes in radar backscatter at moderate incidence

Backscatter from a lake was measured at a 37-deg incidence angle using an FM-CW radar operating on X band and C band simultaneously. A limited amount of Ka-band data was also collected at 50 deg incidence. A video camera recorded the activity within the footprint looking upwind and crosswind. The video showed that breaking waves at all look directions and wedge-shaped waves when looking upwind consistently produced spikes in the radar time series. However, 62 percent to 90 percent of the spikes were not attributable to any surface structure visible on the video picture except wave crests. These spikes may be due to specular reflections or micro-scale breaking too small to be seen. Individual contributions to the backscattering coefficient were calculated for unattributed spikes, breaker spikes, and wedge spikes.

Bush, Daniel A.↗

In-step Inflatable Antenna Experiment

The topics are presented in viewgraph form and include the following: potential space antenna applications; experiment objectives; experiment technical approach; experiment scenario; spartan services; experiment orbital configuration; experiment canister structure; surface measurement system configuration; and orbital functional sequences.

Veal, G.↗

A prediction of Mars seismicity from surface faulting

The shallow seismicity of Mars has been estimated by measurement of the total slip on faults visible on the surface of the planet throughout geologic time. Seismicity was calibrated with estimates based on surface structures on the moon and measured lunar seismicity that includes the entire seismogenic lithosphere. Results indicate that Mars is seismically active today, with a sufficient number of detectable marsquakes to allow seismic investigations of its interior.

Golombek, Matthew P.↗

Power systems for the Mars Environmental Survey (MESUR) Mission

Mars Environmental Survey Mission (MESUR) is intended to be a low cost, near term mission to study the chemical composition of Martian surface, structure and circulation of Mars' atmosphere, and the structure and dynamics of Mars' interior. To meet the science objectives of the mission, a network of 16 landers will be placed at various latitudes and longitudes of Mars. The paper identifies various options for powering the landers and lists the attributes of each option. The current strategy is to precede the lander launch and deployment with an engineering demo mission called the Pathfinder which would demonstrate the landing strategy and the engineering subsystems. The paper briefly describes the challenges involved in the power system development for the Pathfinder mission.

Shirbacheh, Mike↗

Near-ultraviolet imaging of Jupiter's satellite Io with the Hubble Space Telescope

The surface of Jupiter's Galilean satellite Io has been resolved for the first time in the near ultraviolet at 2850 A by the Faint Object Camera (FOC) on the Hubble Space Telescope (HST). The restored images reveal significant surface structure down to the resolution limit of the optical system corresponding to approximately 250 km at the sub-earth point.

Paresce, F.↗

Hot hydrogen testing of metallic turbo pump materials

The objectives of this investigation are to expose heat resistant alloys to hydrogen at elevated temperatures and to use various microstructural and analytical techniques to determine the chemical and rate process involved in degradation of these materials due to hydrogen environment. Inconel 718 and NASA-23 (wrought and cast) are candidate materials. The degradation of these materials in the presence of 1 to 5 atmospheric pressure of hydrogen from 450 C to 1100 C was examined. The hydrogen facility at Auburn University was used for this purpose. Control experiments were also conducted wherein the samples were exposed to vacuum so that a direct comparison of the results would separate the thermal contribution from the hydrogen effects. The samples were analyzed prior to and after exposure. A residual gas collection system was used to determine the gaseous species produced by any chemical reaction that may have occurred during the exposure. Analysis of this gas sample shows only the presence of H2 as expected. Analyses of the samples were conducted using optical microscopy, x-ray diffraction, scanning electron microscopy, and weight change. There appears to be no change in weight of the samples as a result of hydrogen exposure. In addition no visible change on the surface structure was detected. This indicates that the materials of interest do not have strong interaction with hot hydrogen. This is consistent with the microstructure results.

Zee, Ralph↗

Near surface analysis

This is a study to assist in the understanding of earth near surface structure. Higher order moments are used to detect the density distribution as well as to seek patterns found in geological structures. It is shown how higher order moments at points outside a mass structure are determined as well as how to recover the mass distribution from the higher order moments. It is interesting to note that the first moment at a point P outside the mass structure, V(sub O)(P), is the entire mass and the second moment, V(sub 1)(P), is the potential at P due to the mass structure. Usually only the mass and the potential function are used to determine the density distribution in a body. An infinite function sequence (V(sub n)(P))(sub n=0)(sup infinity) is required to uniquely determine the density distribution.

Johnson, Gordon G.↗

Implications of summertime marine stratocumulus on the North American climate

This study focuses on the effects of summertime stratocumulus over the eastern Pacific. This cloud is linked to the semi-permanent sub-tropical highs that dominate the low-level circulation over the Pacific and Atlantic. Subsidence on the eastern flank of these highs creates an inversion based about 800 m above sea level that caps moist air near the surface. This air overlies cool waters driven by upwelling along the coastal regions of North America. Strong surface north-westerlies mix the boundary layer enough to saturate the air just below the capping inversion. Widespread stratocumulus is thus formed. All calculations were carried out using the GENESIS general circulation model that was run at MSFC. Among the more important properties of the model is that it includes radiative forcing due to absorption of solar radiation and the emission of infrared radiation, interactive clouds (both stratocumulus and cumulus types), exchanges of heat and moisture with the lower boundary. Clouds are interactive in the sense that they impact the circulation by modifying the fields of radiative heating and turbulent fluxes of heat and moisture in the boundary layer. In turn, clouds are modified by the winds through the advection of moisture. In order to isolate the effects of mid- and high-latitude stratocumulus, two runs were made with the model: one with and the other without stratocumulus. The runs were made for a year, but with perpetual July conditions, i.e., solar forcing was fixed. The diurnal solar cycle, however, was allowed for. The sea surface temperature distribution was fixed in both runs to represent climatological July conditions. All dependent variables were represented at 12 surfaces of constant sigma = p/p(sub O), where p is pressure and p(sub O) is surface pressure. To facilitate analysis, model output was transformed to constant pressure surfaces. Structures no smaller in size than 7.5 degrees longitude and 4.5 degrees in latitude were resolved. Smaller features of the circulation were parameterized. The model thus captures synoptic- and planetary-scale circulation features.

Clark, John H. E.↗

The sensitivity of various mode sets for probing differential rotation shear zones

The potential of future data sets from global oscillations network group (GONG) and solar oscillations investigation (SOI) for resolving long-lived azimuthal jets and shearing flows, is investigated. Various artificial data sets are constructed, containing noise resembling that of a one-year observation run. These are inverted using a two dimensional regularized least squares inversion. The ability of this method to form well localized averages of the rotation rate, as measured by the averaging kernels, is investigated using an extensive mode set and subsets. It is shown that it is possible to keep the noise in the solution down to a few nHz in much of the solar interior, while obtaining a reasonable resolution for a GONG-like data set. At low latitudes in the middle of the convection zone, an angular resolution of less than 10 deg and a radial resolution of about 0.04 solar radii, are obtained. The averaging kernels depend on the mode set, and a reduction in the number of modes tends to introduce small-scale near surface structures into the averaging kernels which would adversely affect the inferred rotation rate.

Christensen-Dalsgaard, Joergen↗

Laser-Scan Ultrasonic/Thermographic Inspection System

Laser ultrasonic/thermographic inspection system is conceptual instrument used in nondestructive inspection of large areas of structures for subsurface defects. For example, operated in field to examine aircraft and pressure vessels for hidden cracks. System would not require contact with inspected structure or use of ultrasonic-coupling medium. Instrument obtains data in ultrasonic and thermographic C-scans over structural surfaces with contours characterized by surface normal vectors varying by angles as large as 45 degrees.

Bar-Cohen, Yoseph↗

The Surfaces of Pluto and Charon

Much of the surface of Pluto consists of high-albedo regions covered to an unknown depth by Beta-N2, contaminated with CH4, CO, and other molecules. A portion of the exposed surface appears to consist of solid H2O. The remainder is covered by lower albedo material of unknown composition. The N2 ice may occur as polar caps of large extent, leaving ices and other solids of lower volatility in the equatorial regions. The low-albedo material found primarily in the equatorial regions may consist in part of solid hydrocarbons and nitriles produced from N2 and CH4 in the atmosphere or in the surface ices. Alternatively, it may arise from deposition from impacting bodies and/or the chemistry of the impact process itself. Charon's surface is probably more compositionally uniform than that of Pluto, and is covered by H2O ice with possible contaminants or exposures of other materials that are as yet unidentified. The molecular ices discovered on Pluto and Charon have been identified from near-infrared spectra obtained with Earth-based telescopes. The quantitative interpretation of those data has been achieved through the computation of synthetic spectra using the Hapke scattering theory and the optical constants of various ices observed in the laboratory. Despite limitations imposed by the availability of laboratory data on ices in various mixtures, certain specific results have been obtained. It appears that CH4 and CO are trace constituents, and that some fraction of the CH4 (and probably the CO) on Pluto is dissolved in the matrix of solid N2. Pure CH4 probably also occurs on Pluto's surface, allowing direct access to the atmosphere. Study of the nitrogen absorption band at 2.148 micrometers shows that the temperature of the N2 in the present epoch is 40 +/-2 K. The global temperature regime of Pluto can be modeled from observations of the thermal flux at far-infrared and millimeter wavelengths. The low-albedo equatorial regions must be significantly warmer than the polar regions covered by N2 (at T = 40 K) to account for the total thermal flux measured. At the present season, the diurnal skin depth of the insolation-driven thermal wave is small, and the observed mm-wave fluxes may arise from a greater depth. Alternatively, the mm-wave flux may arise from the cool, sublimation source region. The surface microstructure in the regions covered by N2 ice is likely governed by the sintering properties of this highly volatile material. The observed nitrogen infrared band strength requires that expanses of the surface be covered with cm-sized crystals of N2. Grains of H2O ice on Charon, in contrast, are probably of order 50 micrometers in size, and do not metamorphose into larger grains at a significant rate. Because of the similarities in size, density, atmosphere and surface composition between Pluto and Neptune's satellite Triton, the surface structures observed by Voyager on Triton serve as a plausible paradigm for what might be expected on Pluto. Such crater forms, tectonic structures, aeolian features, cryovolcanic structures, and sublimation-degraded topography as are eventually observed on Pluto and Charon by spacecraft will give information on their interior compositions and structures, as well as on the temperature and wind regimes over the planet's extreme seasonal cycle.

Cruikshank, Dale P.↗

Spectroscopic Evidence for Nonuniform Starspot Properties on II Pegasi

We present spectroscopic evidence for Multiple Spot temperatures on the RS CVn star II Pegasi (HD 224085). We model the strengths of the 7055 and 8860 A TiO absorption bands in the spectrum of II Peg using weighted sums of inactive comparison spectra: a K star to represent the nonspotted photosphere and an M star to represent the spots. The best fit yields independent measurements of the starspot filling factor (f(sub s) and mean spot temperature (T(sub s)) averaged over the visible hemisphere of the star. During three-fourths of a rotation of II Peg in late 1996, we measure a constant f(sub s) approximately equals 55% +/- 5%. However, (T(sub s) varies from 3350 +/- 60 to 3550 +/- 70 K. We compute (T(sub s) for two simple models: (1) a star with two distinct spot temperatures, and (2) a star with different umbral/penumbral area ratios. The changing (T(sub s) correlates with emission strengths of H(alpha) and the Ca II infrared triplet in the sense that cooler (T(sub s) accompanies weaker emission. We explore possible implications of these results for the physical properties of the spots on II Peg and for stellar surface structure in general.

ONeal, Douglas↗

Chromospheric Doppler Imaging

We reanalyzed the IUE data from the 1991, 1993, and 1995 AR Lac campaigns. Doppler imaging analyses show evidence for asymmetric chromospheric flux distributions, but the plages are not as compact as they were in the 1980's. The expected 1997 data were not obtained due to the failure of the IUE. A discussion of the data, the problems, and the initial results, is in "Stellar Chromospheres", F.M. Walter, in "Stellar Surface Structure", ed. K.G. Strassmeier & J.L. Linsky (Dordrecht:Kluwer) (1996), p. 355. We are currently working on a paper based on this work.

Walter, Frederick M.↗

Final Report

As an ongoing project, the original proposal of implementing BFS (Bozzolo-Ferrante-Smith methods) to the process of alloy design was satisfied beyond the original expectations, as the project evolved from the original goal of backing the experimental results with theoretical and computational evidence, to the point where theoretical predictions lead the way for further experimental studies. For the first time, computer simulations were used to predict the phase stability of many component systems (four and five elements), which are currently being developed and analyzed experimentally. Similar progress was made in the area of surface structure analysis via computer simulations.

Bozzolo, Guillermo↗