Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Simultaneous measurement of surface velocity and plasma density with interferometric velocimetry

The apparent velocity measured by an interferometric surface velocimeter is a function of both the surface velocity and the time derivative of the refractive index along the measurement path. We employed this dual sensitivity to simultaneously measure km/s surface velocities and 10 18 cm -3 average plasma densities with combined VISAR (velocity interferometer system for any reflector) and PDV (photonic Doppler velocimetry) measurements in experiments performed on the Z Pulsed Power Facility. We detail the governing equations, associated assumptions, and analysis specifics and show that the surface velocity can be extracted without knowledge of the specific plasma density profile.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Surface Phase Stability of Fe 2 O 3 (001) in Hydrogen Reducing Environments: A DFT and XPS Analysis

Here, this study combines density functional theory (DFT) and ab initio thermodynamics calculations with X-ray photoelectron spectroscopy (XPS) investigations to identify the reduction properties of the Fe 2 O 3 (001) surface with implications for corrosion resistance, hydrogen transport, and energy safety. Ab initio thermodynamics modeling predicts fully hydroxylated surface stability across a broad range of pressures (1 × 10 –23 to 1 × 10 5 mbar) and temperatures below 700 K, consistent with previous experimental studies. Above 800 K, exposures to 1 × 10 –4 mbar H 2 , 1 × 10 –4 mbar O 2 , or 1 × 10 –4 mbar H 2 + 1 × 10 –4 mbar O 2 each yield unique XPS signals indicating a loss of −OH coverage, aligning with DFT predictions. Insight into the mechanism of reduction as a function of H 2 exposure is provided, as well as conditions that promote further reduction toward Fe 3 O 4 . Theoretical and experimental investigations indicate the ability to maintain the Fe 2 O 3 protective layer of iron oxides that have been exposed to H 2 environments by including trace amounts of aqueous O2.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Biogeochemical Controls on Wood Degradation as a Source of Bioavailable Carbon in Denitrifying Bioreactors

Woodchip bioreactors (WBRs) are important tools for the removal of nitrate in agricultural drainage, but their effectiveness is often limited by the slow degradation of lignocellulosic wood residues into bioavailable forms of carbon that fuel denitrifying microorganisms. Here, we examine biogeochemical factors regulating wood degradation in saturated woodchip beds, with a focus on the effects of dissolved oxygen (DO), iron (Fe), and manganese (Mn) in generating oxidative activity that can enhance wood decomposition. Woodchips from a 10-year-old WBR were characterized with bulk techniques and a novel combination of μX-ray scattering, μXRF, and μXANES to visualize the depletion of crystalline cellulose as a proxy for wood degradation. Woodchips from upstream portions of the reactor exhibited the greatest degradation, probably due to greater DO exposure, and degradation was localized to a 100 to 200 μm thick surface layer that was also associated with higher concentrations of Fe and Mn. Greater degradation was associated with faster nitrate removal. μXANES analysis of Fe and Mn in the surface layer indicated the presence of a microenvironment in which oxygenation reactions of Fe(II) and Mn(II) could contribute to the formation of reactive oxidants involved in the degradation of lignocellulose. In conclusion, our results provide new insight into biogeochemical properties that influence wood decomposition in WBRs at both micro- and macroscales and how these wood degradation processes are coupled with denitrification.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chiral Topological Surface States on a Finite Square Photonic Crystal Bounded by Air

Chiral, topologically protected, photonic surface states can be found at the boundary between gyrotropic photonic crystals where a changing magnetic field induces different topology across the interface. Typically, photonic crystals with either a suitable band structure on both sides of the interface to provide a band gap and evanescent decay of the surface states away from the interface, or an outer layer with engineered material properties is required. In this paper, we show the emergence of topological, unidirectional surface states at the termination of finite gyrotropic photonic crystals with a simple square lattice and C 4 rotational symmetry bounded by a vacuum, eliminating the need for an outside layer to enable chiral surface modes. Here, we start from an infinite, time-reversal-symmetry-breaking photonic crystal with a band gap associated with bands with nonzero Chern numbers, different from all-zero Chern numbers in air. We then modify the photonic crystal to move this band gap below the light line, while maintaining the Chern-number discontinuities. Band-structure calculations for a supercell approximating a photonic crystal finite in the direction normal to the surface demonstrate the existence, dispersion, and chirality of the surface mode. Extensive direct scattering calculations for a point source and spatial Fourier analysis further reveal a unidirectional free-space topological surface state, which propagates counterclockwise around the surface of a finite photonic crystal, providing a nearly foolproof way to cross-check the surface-mode band structure unaffected by backscattering from local defects. Additionally, scattering simulations allow an independent characterization of the state dispersion and unveil the robustness of the topological plasmonic mode propagation around the 90° bends of the structure, being due to only radiation leakage. In contrast to buried topological surface states, the observed surface modes at the photonic crystal–air interface have the advantage of being accessible to the outside world, allowing one to take advantage of the defect-tolerant backscattering-free surface modes to engineer emission from photonic crystal surfaces into arbitrary free-space beam shapes and directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Combined effect of NaAlO2 and NaOH on the early age hydration of Portland cement with a high concentration of borate solution

The early age hydration of ordinary Portland cement in 5 M borate solution, with or without the addition of NaAlO{sub 2} and/or NaOH, was investigated. Hydration was measured using calorimetry, X-ray diffraction, thermogravimetric analysis, {sup 11}B and {sup 27}Al magic angle spinning NMR analysis, and scanning transmission electron microscopy. The purpose of this study was to reveal the mechanisms behind the retardation caused by a high concentration borate solution and the restoration of hydration through the combined addition of NaOH and NaAlO{sub 2}. Amorphous ulexite, which formed on the surface of the cement particles and prevented the further dissolution of anhydrous phases, was identified as the retardation product. The mechanism of the combined addition of NaAlO{sub 2} and NaOH in overcoming retardation was to transform amorphous ulexite into B-AFt and gowerite (CaB{sub 6}O{sub 10}·5H{sub 2}O). Formation of gowerite is favorable because of the much higher boron immobilization capacity in weight percentage, comparing to usual boron-containing phases reported previously.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Impact of n > 1 neoclassical tearing modes on fast ions, plasma rotation, and the onset of disruptive tearing modes in DIII-D ITER baseline scenario

We present integrated TRANSP-kick analyses quantitatively characterizing how n > 1 magnetic islands redistribute fast ions (FIs) and modify momentum balance in low-torque DIII-D H-mode scenarios operated with the ITER normalized parameter set and shape (ITER baseline scenario, or IBS). In this plasma scenario, disruptive neoclassical tearing modes (NTMs) are most commonly seeded by nonlinear 3-wave coupling when the differential rotation between the q = 1 and q = 2 surfaces ($δf_{1, 2}$) approaches zero. Analysis of a DIII-D IBS database of shots unstable to the 2/1 NTM demonstrates that the flattening rotation profile is correlated with n > 1 NTM amplitude growth, with a strong drop in $δf_{1, 2}$ occurring when the radial magnetic perturbation amplitude at the rational surface ($δB$ r s ) is estimated to be about 20 G. The interpretive TRANSP-kick simulations show that the experimentally observed reduction in core rotation is due to the fast-ion kicks. Nonlinearity in momentum losses versus NTM amplitude is found to be correlated with overlap of FI island chains, occurring when $δB$ r s is about 35 G, in rough agreement with the experimental results. This agreement suggests the primary mechanism for the conductive momentum loss in the core is due to chaotic FI orbits and FI losses developing from overlapping resonant FI island chains.

ITER baseline scenario↗
DOE OSTI2024

On the Departure from Monin–Obukhov Surface Similarity and Transition to the Convective Mixed Layer

Large-eddy simulations are used to evaluate mean profile similarity in the convective boundary layer (CBL). Particular care is taken regarding the grid sensitivity of the profiles and the mitigation of inertial oscillations in the simulation spin-up. The nondimensional gradients Φ for wind speed and air temperature generally align with Monin–Obukhov similarity across cases but have a steeper slope than predicted within each profile. The same trend has been noted in several other recent studies. The Businger-Dyer relations are modified here with an exponential cutoff term to account for the decay in Φ to first-order approximation, yielding improved similarity from approximately 0.05z i to above 0.3z i , where z i is the CBL depth. The necessity for the exponential correction is attributed to an extended transition from surface scaling to zero gradient in the mixed layer, where the departure from Monin–Obukhov similarity may be negligible at the surface but becomes substantial well below the conventional surface layer height of 0.1 z i .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Surface functionality and formation mechanisms of carbon and graphene quantum dots

Graphene quantum dots (GQDs) and Carbon dots (C-dots) have been widely studied in recent years due to their structural and optoelectrical properties. These properties have prompted the exploration of the role of these carbon-based materials in many potential applications. This includes solar cells, photodetectors, bioimaging, sensors, batteries and drug delivery. These properties and applications of GQDs and C-dots are highly dependent on their size, shape and surface functionality. In this work, GQDs and C-dots mixtures have been synthesized by an inexpensive wet chemical method by varying the synthesis temperature from 85°, 100° to 115 °C. The surface functionalities of the synthesized carbon-based materials were investigated by several analytical methods. We discovered a higher degree of oxidation at higher temperatures. The mechanism of formation of different sized GQDs and C-dots with different functionalities have been explained with the help of XPS and NEXAFS analysis. The influence of size and surface functionalities on the optical properties of these nanomaterials is analyzed by UV–Vis and PL spectroscopic techniques. Furthermore, this study demonstrates that physicochemical properties of GQDs and C-dots can be controlled by changing the synthesis temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ion irradiation effects on Cr-coated zircaloy-4 surface wettability and pool boiling critical heat flux.

The concept of coating the currently used nuclear fuel cladding (zirconium-based alloy, typically Zircaloy-4 or Zirc-4) with an oxidation preventive layer is a progressing Accident tolerant Fuel (ATF) candidate alloys. The coated Zirc-4-based alloys could be a solution to suppress undesirable fast reaction kinetics with high-temperature steam. Zirc-4 has been the most preferred cladding material in pressurized water reactors (PWRs). Chromium (Cr) based alloys as a coating material provides excellent corrosion protection and good strength and wear resistance. In this paper, we present the surface wettability measurements and pool boiling Critical Heat Flux (CHF) for Cr-coated Zirc-4 claddings pre- and post-exposure to an ion irradiation environment. The wettability measurements, including static contact angle (contact angle, θ) and average surface roughness (surface roughness, Ra), are introduced for samples of different coating thicknesses (5–30 μm thick). The coatings fabricated by the cold spray of Cr-Al particles to 10 mm × 10 mm × 1.95 mm Zirc-4 substrates. Post fabrication, a Pilgering (cold rolling) process, was applied to finalize the coating thickness and resulted in a significant reduction in surface roughness of initially fabricated rough surfaces. The process produced three distinguished samples 5-μm unpolished (as machined), 5-μm, and 30-μm polished (cold rolled). The measurements are presented for the three surfaces and bare Zirc-4 as a baseline surface. The contact angle analyses were implemented in theoretical models from the literature to predict pool boiling CHF. Pool boiling experiments were conducted to measure the pool boiling CHF values and compare them to the predicted values. Scanning Electron Microscope (SEM) images and Energy Dispersive X-ray Spectroscopy (EDS) analysis was performed to characterize the surfaces for better understanding and interpreting the results. The SEM images showed localized surface damage due to ion irradiation. No recognized change in the measured surface roughness due to ion irradiation. The contact angles of irradiated Cr-coated surfaces are consistently higher (10°) than pre-irradiated surfaces. Decreasing the Cr-coating layer thickness resulted in lower contact angle pre- and post- ion irradiation. The predicted pool boiling CHF using the Kandlikar model is in good agreement with the experimentally measured CHF values within ±12% for all samples.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electroconvection near an ion-selective surface with Butler–Volmer kinetics

We study the effects of interfacial kinetics on the electro-hydrodynamics of ion transport near an ion-selective surface using a combination of linear stability analysis and numerical simulation. The finite kinetics of the electrolyte–electrode interface affects the ion transfer and electroconvection in many ways. On a surface of fixed topography, such as a metal surface of slow and stable ion deposition or covered by a polymer membrane, the finite kinetics reduces the current in one-dimensional ion diffusion/migration, increases the critical voltage for the onset of the electroconvective instability, changes the dynamics of the electroconvection and the overlimiting current, and enhances the lateral ion diffusion within the interfacial layer. The first three effects are indirectly caused by the reaction kinetics and can be characterized by an effective voltage difference across the liquid electrolyte. In comparison, the last effect is controlled by a direct interplay between kinetics and nonlinear electroconvection. Scaling laws for ion transport and features of electroconvection are proposed. We also analyse the linear stability of a surface which evolves under ion deposition and find that the finite kinetics decreases the growth rate of both electroconvective and morphological instabilities and therefore modifies the wavenumber of the most unstable mode.

Mechanics↗
DOE OSTI2022

Surface Stabilization with Fluorine of Layered Ultrahigh-Nickel Oxide Cathodes for Lithium-Ion Batteries

High-nickel layered oxide cathodes are key to meet the demands of the electric vehicle industry because of their high specific capacity. However, commercialization of these materials is hindered by critical challenges, such as phase transitions, particle cracking, aggressive surface reactivity, and thermal instability. Cation doping along with surface coating has proven to be an effective way to circumvent some of these issues to a large extent. Herein, fluorine coating is employed on a high-nickel Li[Ni 0.95 Mn 0.015 Co 0.02 Al 0.01 Mg 0.005 ]O 2 (NMCAM) cathode via a solution route. Detailed structural and electrochemical analyses indicate fluorine largely decorates the surface at low enough calcination temperatures. The cathode with 1 mol % fluorine coating exhibits a capacity retention of 71% after 500 cycles as compared to 59% for the control sample when cycled to a high cutoff voltage of 4.3 V in a full cell configuration with graphite anode. Post-mortem analysis of cycled electrodes reveals that surface reactivity is a major contributor to capacity fade as compared to particle cracking. Fluorine coating reduces surface reactivity and the depth to which rock-salt phase is formed on the surface during cycling. The thermal stability is also enhanced after fluorine coating as the material shows less heat release at high states of charge. Furthermore, this work demonstrates an effective, economical, and scalable way to stabilize the surface with fluorine and enhance the electrochemical performance of high-nickel cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Design of Planarizing Growth Conditions on Unpolished and Faceted (100)-Oriented GaAs Substrates Using Hydride Vapor Phase Epitaxy

Here we performed a design of experiments (DoE) analysis to determine the effect of various growth parameters on in situ planarizing overgrowth of rough substrates using hydride vapor phase epitaxy (HVPE). We used two types of rough (100)-oriented GaAs substrates to compare the effect of the initial morphology on the epitaxial growth behavior: an irregular, as-cut surface resultant from cutting the wafer from a GaAs boule and a regularly faceted surface produced by controlled spalling. The DoE analysis identified trends in the overgrowth behavior with changing growth conditions, and we used these trends to design favorable planarization growth conditions for each surface type. These favorable conditions enabled full planarization of a spalled surface with >2.5 um facet height within 10.8 min of growth. The root mean squared (RMS) surface roughness of the resulting (100) surface was 24.5 nm over a 286 um x 215 um area. Our results show that planarization growth by HVPE is a promising technique to enable device growth directly on rough substrates, and the trends revealed through DoE analysis indicate a path toward further optimization of planarization growth conditions for as-cut and spalled surfaces.

14 SOLAR ENERGY↗
DOE OSTI2022

Analysis of solid uranium particulates on cotton swipes with an automated microextraction-ICP-MS system

Here, an automated microextraction method coupled to an inductively coupled plasma – mass spectrometer (ICP-MS) was developed for the direct analysis of solid uranium particulates on the surface of cotton swipes. The microextraction probe extracts particulates from the sample surface, in a flowing solvent, and directs the removed analyte to an ICP-MS for isotopic determination. The automated system utilizes a mechanical XY stage that is software controlled with the capability of saving and returning to specific locations and a camera focused to the swipe surface for optimal viewing of the extracted locations (i.e., material present). Here, particulates (n = 135) were extracted and measured by ICP-MS, including 35 depleted uranyl nitrate hexahydrate (UN) (used for mass bias corrections), 50 uranyl fluoride (UO 2 F 2 ), and 50 uranyl acetate (UAc) particulates. Blank extractions were performed on the cotton swipes between triplicate sample analyses. Between each swipe extraction, the probe was sent between two wells containing 10% and 5% HNO 3 to clean the probe head and to eliminate any analyte carryover between particulates. The measured 235 U/ 238 U and 234 U/ 238 U isotope ratios for the UO 2 F 2 particulates were 0.00725(8) and 0.000054(4), a percent relative difference (% RD) of –0.041% and –1.7% from the reference isotope ratios determined in-lab through multi-collector ICP-MS analysis of dissolved aliquots of the U material. The UAc samples had a measured 235 U/ 238 U isotope ratio of 0.00206(7), a –0.96% relative difference from the reference value of 0.00208(1). The 234 U/ 238 U and 236 U/ 238 U isotope ratios were 0.000008(1) and 0.000031(4), –5.1% RD and –4.3% RD, respectively. The automated sample stage enabled seamless and rapid particle analysis, leading to a significant increase in throughput versus what was previously possible. Additionally, the saved location capability reduced user sampling error as sampling locations were easily stored and recalled. Analysis of U particles on the swipe surface – including blanks, mass bias, and triplicate extractions – was completed in less than an hour without any sample preparation necessary.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Improving high temperature resilience of fiber sensor embedded smart components through laser shock peening

This study explores the use of laser shock peening (LSP) to enhance material properties and high-temperature performance of fiber-sensor-fused smart parts fabricated by additive manufacturing (AM) methods. Using embedded fiber sensors as distributed strain gauges, the study demonstrates that LSP can induce compressive strains of up to 130 µε on fiber embedded 1-mm below metal surfaces. The electron backscatter diffraction (EBSD) analysis shows that, with optimized LSP parameters, the metallic matrix undergoes substantial microstructural refinement, resulting in denser structures. Thermal cycling tests showed that the LSP process can increase fiber slippage temperatures by more than 50 °C. This work shows that the LSP process is an effective room-temperature process for enhancing both surface quality and increasing fiber slippage threshold under both thermal and mechanical stress.

Zhong, Shuda [University of Pittsburgh, PA (United↗
DOE OSTI2020

Feedback on Forty-year Long Clean-up Operations of a Contaminated Soil for Environmental Purpose - 20026

One of the CEA facilities in France is the place of miscellaneous mapping and clean-up operations since the 1980's. The final purpose of the conducted work deals with the environmental remediation of the building. In France, the absence of a regulatory framework for the management of sites polluted by radioactive substances, especially as the lack of release thresholds, has led to develop different approaches of soil radiological characterization. The geostatistical approach is part of them. Preliminary investigations are an unavoidable step prior to clearance and remediation. First, historical analysis enables to define site perimeters to investigate as well as to precisely locate expected contaminated parts. For radioactive pollutants, the media (water, soil, air) and transfer routes participate in the definition of the investigation perimeter and thus also need to be identified through a geological study. At the same time, functional analysis leads to choose the best measurement means which could provide useful information when combined with visual inspection. An equipment well adapted to easy-to-measure radionuclides as gamma emitters, such as gamma probe or on-site gamma spectrometry, is usually selected as a non-destructive assay. Coupled with spatial positions, processed on-site radiological data can be mapped. Data processing consists in mapping and kriging before a geostatistical analysis in order to identify the zones of interest to be targeted. Selected zones are not only linked to high level count rates but also to low level ones so that a pollution-free reference is known in the area. This data processing also enables to categorize waste types according to their origin and contamination levels. An expected volume of different waste then follows as well as the waste characterization equipments. In-depth investigations, e.g. core drillings and samplings, naturally ensue to aim at remediation optimization through the assessment of environmental impact. After clean-up operations, non-destructive assays as well as destructive samplings enable to check the effective clearance. Following this methodology in the present remediation work, results of the first non-destructive assay campaign highlighted a long-lived transuranic radionuclides contamination in the concrete flagstone. Successive non-destructive assays were then performed in the defined zones of interest. Count rates measured with a surface probe were first mapped. The best localization of destructive assays, i.e. core drillings at a 1 meter depth, came from this surface mapping followed by a geostatistical analysis. The concrete flagstone was totally removed. Then, the depth of soil to remove under the flagstone was optimized from the results of radiological activities measured in core drillings samples. A new surface mapping was then drawn after this partial soil excavation. The sand and demolition rubble samples, homogeneously constituted from the flagstone fragments, were analyzed by gamma spectrometry. Meanwhile, waste drums and other containers were also measured by gamma spectrometry and passive neutron measurement devices. All these results have brought miscellaneous pieces of information. In this context, major issues appear in terms of physical constraints such as the premises tininess as well as of soil sampling techniques and in terms of measurement performances assessment and the representativeness of homogeneous samples. The choice of radiological soil and waste characterization devices is described in the light of enhanced performances by keeping in mind radiation protection requirements and a willing to always optimize waste categories (very low level waste) and volume. The improvement of the characterization methods appears through this forty-year long work while sharing the feedback of encountered difficulties. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Tailored mesoporous structures of lignin-derived nano-carbons for multiple applications

This work uses a one-step KOH activation for lignin precursors to produce ultra-high mesoporous activated carbons (ACs) with an unprecedented combination of the surface area of 3207 m 2 g -1 and mesopore ratio of 76%. The ACs are applied for supercapacitors (SCs) and methylene blue (MB) adsorption. The capacitance of the SCs in the three-electrode system reaches 812.3 F g -1 and demonstrates a remarkable maximum MB adsorption capacity of 1250 mg g -1 . By modifying the process conditions, the mesopore ratio of ACs could be controlled from 10% to 80%. Compared with one-step activation, a two-step method produced microporous carbons with a lower surface area of 1227 m 2 g -1 and a high micropore ratio of 73%. The capacitance of SCs with two-step ACs reached 228.1 F g -1 and the maximum adsorption capacity of 476.19 mg g -1 for MB adsorption. The two-step method limited the surface area but had a higher oxygen surface functionality, benefiting its electrochemical performance. A techno-economic analysis reveals that the one-step KOH activation-based process develops ACs with a minimum selling price of $7648/ton. In conclusion, this work demonstrates tuning the processing-structure-property-performance relationship of lignin-based ACs to make an economically viable domestic carbon source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Climatology of Cloud‐Land‐Surface Coupling Across Different ARM Sites

Land-atmosphere interactions play a critical role in the evolution and formation of low-level clouds. The different states of coupling between low-level clouds and the surface are uncertain, primarily over continental regions, where complex thermodynamics complicates their investigation. This study uses observations from the Atmospheric Radiation Measurement User Facility to explore cloud-surface coupling and perform a climatological analysis of this interaction in five countries across three continents. The results reveal consistent coupling thresholds and average percentages across the five sites, with coupled clouds accounting for 66% of the cases and decoupled clouds for 34%. Thermodynamic and dynamic evaluations show distinct differences between coupled and decoupled clouds. Coupled clouds are characterized by humid environments, in which vertical motions connect the surface and lower atmosphere to the cloud base, conditions that favor the formation of boundary layer clouds. Decoupled clouds prefer to occur in a drier and colder environment with vertical motions inside the boundary layer being detached from the cloud base, under which boundary layer clouds are hard to form. Coupled clouds peak during warmer hours and seasons, and vice versa for decoupled clouds. This study underscores the complexity of cloud-land-surface interactions and paves the way for further investigations into cloud formation and evolution under different atmospheric environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Examination of Intergranular Crack on SC0234

The microstructure of the SC0234 weld was evaluated per DA-SPEC-01067, ''General Purpose Heat Source (GPHS) Plutonium-238 Dioxide Fueled Clad Product Specification'' and it was determined that the weld microstructure conformed to the quality requirements. During the examination of weld cross section, the metallographic analysis revealed the presence of a surface crack. Prior visual examination per RPS-TA55-303 had not revealed the crack, nor did the surface photography performed per RPS-TA55-302. The presence of the crack does not violate any of the product specifications called out on DA-SPEC-01067. Although there is a well-documented history of weld hot crack susceptibility in the early development of the DOP-26 iridium alloy, a surface crack such as this had not been documented during welding at Los Alamos. In the interest of better understanding the cause; the product engineer/program recommended further examination of the crack. This report discusses the examination of the crack found in the weld cross section of simulant clad SC0234. Metallography, Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy techniques (EDS) where used in the analysis of the crack and the surrounding weld microstructure.

36 MATERIALS SCIENCE↗