Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Strain calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Elucidating the Initial Steps in α-Uranium Hydriding Using First-Principles Calculations

Hydrogen embrittlement of uranium, which arises due to the formation of a structurally weak pyrophoric hydride, poses a major safety risk in material applications. Previous experiments have shown that hydriding begins on the top or near the surface (i.e., subsurface) of α-uranium. However, the fundamental molecular-level mechanism of this process remains unknown. Here, in this work, starting from pristine α-U bulk and surfaces, we present a systematic investigation of possible mechanisms for the formation of metal hydride. Specifically, we address this problem by examining the individual steps of hydrogen embrittlement, including surface adsorption, subsurface absorption, and the interlayer diffusion of atomic hydrogen. Furthermore, by examining these processes across different facets, we highlight the importance of both (1) hydrogen monolayer coverage and (2) applied tensile strain on hydriding kinetics. Taken together, by studying previously overlooked phenomena, this study provides foundational insights into the initial steps of this overall complex process. We anticipate that this work will guide near-term future development of multiscale kinetic models for uranium hydriding and subsequently identify potential strategies to mitigate this undesired process.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Design of a V–Ti–Ni alloy with superelastic nano-precipitates

Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformation after initial stress-induced forward transformation. To this end, utilizing ab-initio simulations and thermodynamic calculations we designed and produced a V 45 Ti 30 Ni 25 (at%) alloy. In this alloy, TiNi is present as nano-precipitates uniformly distributed within a ductile V-rich base-centered cubic (bcc) β matrix, as well as being present as a larger matrix phase. We characterized the microstructure of the produced alloy using various scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. Furthermore, the bulk mechanical properties of the alloy are demonstrated through tensile tests, and the reversible transformation in each of the TiNi morphologies were confirmed by in-situ TEM micro-pillar compression experiments, in-situ high-energy diffraction synchrotron cyclic tensile tests, indentation experiments, and differential scanning calorimetry experiments. The observed transformation pathways and variables impacting phase stability are critically discussed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Orientation-Controlled Large-Area Epitaxial PbI 2 Thin Films with Tunable Optical Properties

Lead iodide (PbI 2 ) as a layered material has emerged as an excellent candidate for optoelectronics in the visible and ultraviolet regime. Micrometer-sized flakes synthesized by mechanical exfoliation from bulk crystals or by physical vapor deposition have shown a plethora of applications from low-threshold lasing at room temperature to high-performance photodetectors with large responsivity and faster response. However, large-area centimeter-sized growth of epitaxial thin films of PbI 2 with well-controlled orientation has been challenging. Additionally, the nature of grain boundaries in epitaxial thin films of PbI 2 remains elusive. Here, we use mica as a model substrate to unravel the growth mechanism of large-area epitaxial PbI 2 thin films. The partial growth leading to uncoalesced domains reveals the existence of inversion domain boundaries in epitaxial PbI 2 thin films on mica. Combining the experimental results with first-principles calculations, we also develop an understanding of the thermodynamic and kinetic factors that govern the growth mechanism, which paves the way for the synthesis of high-quality large-area PbI 2 on other substrates and heterostructures of PbI 2 on single-crystalline graphene. Here, the ability to reproducibly synthesize high-quality large-area thin films with precise control over orientation and tunable optical properties could open up unique and hitherto unavailable opportunities for the use of PbI 2 and its heterostructures in optoelectronics, twistronics, substrate engineering, and strain engineering.

2D materials↗
DOE OSTI2023

Phosphorus diffusion and deactivation during SiGe oxidation

Dopant profiles near the semiconductor–oxide interface are critical for microelectronic device performance. As the incorporation of Si 1−x Ge x into transistors continues to increase, it is necessary to understand the behavior of dopants in Si 1−x Ge x . In this paper, the diffusion and electrical activation of phosphorus within a strained, single-crystal Si 0.7 Ge 0.3 layer on Si during oxidation are reported. Both layers were uniformly doped, in situ, with an average phosphorus concentration of 4 × 10 19 atoms/cm 3 . After high-temperature oxidation, secondary ion mass spectrometry measurements revealed that the bulk of the phosphorus diffuses out of only the SiGe layer and segregates at the oxidizing SiGe–SiO 2 interface. Hall effect measurements corroborate the observed phosphorus loss and show that the phosphorus diffusing to the oxidizing interface is electrically inactive. Through density functional theory (DFT) calculations, it is shown that phosphorus interstitials prefer sites near the SiGe–SiO 2 interface. Finally, based on a combination of experimental data and DFT calculations, we propose that the phosphorus atoms are displaced from their lattice sites by Ge interstitials that are generated during SiGe oxidation. The phosphorus atoms then migrate toward the SiGe–SiO 2 interface through a novel mechanism of hopping between Ge sites as P–Ge split interstitials. Once they reach the interface, they are electrically inactive, potentially in the form of interstitial clusters or as part of the reconstructed interface or oxide.

Thornton, Chappel S.↗
DOE OSTI2023

HopPyBar

HopPyBar is a python program to import, analyze, and export split-Hopkinson pressure bar (SHPB, also known as Kolsky bar) data. Traditional analysis offers a black box approach, where input data is converted to analyzed output by performing a series of calculations without user involvement. This program serves as a developmental platform to "white box" the data analysis process. Data streams can be captured (in-situ) to enable advanced or unconventional analyses, statistics, and comparisons. Additionally, the program is geared towards the standardized forms of input and output used at LANL to streamline analysis, but the open nature of the program makes additional input/output schemes straightforward to add. General workflow will import SHPB data in one of a number of formats, identify relevant portions of data signals, and convert to stress-strain-strain rate to show material behavior as a function of dynamic testing.

Morrow, Benjamin↗
DOE OSTI2020

Structure of the Polymer Backbones in polyMOF Materials

The molecular connectivity of polymer–metal–organic framework (polyMOF) hybrid materials was investigated using density functional theory calculations and solid-state NMR spectroscopy. The architectural constraints that dictate the formation of polyMOFs were assessed by examining poly(1,4-benzenedicarboxylic acid) (pbdc) polymers in two archetypical MOF lattices (UiO-66 and IRMOF-1). Modeling of the polyMOFs showed that in the IRMOF-1-type lattice, six, seven, and eight methylene (–CH 2 –) groups between 1,4-benzenedicarboxylate (terephthalate, bdc 2– ) units can be accommodated without significant distortions, while in the UiO-66-type lattice, an optimal spacing of seven methylene groups between bdc 2– units is needed to minimize strain. Solid-state NMR supports these predictions and reveals pronounced spectral differences for the same polymer in the two polyMOF lattices. With seven methylene groups, polyUiO-66-7a shows 7 ± 3% of uncoordinated terephthalate linkers, while these are undetectable (<4%) in the corresponding polyIRMOF-1-7a. Additionally, NMR-detected backbone mobility is significantly higher in the polyIRMOF-1-7a than in the corresponding polyUiO-66-7a, again indicative of taut chains in the latter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structure and mechanical properties of grain boundaries in molybdenum disulfide (MoS 2 )

Molybdenum disulfide (MoS 2 ) is a two-dimensional material widely used as a lubricant in many applications involving mechanical loading under a wide range of operating temperatures. Since many synthesis and processing techniques yield MoS 2 in its polycrystalline form, establishing grain boundary (GB) structure–property relations is key to designing MoS 2 microstructures with tailored properties. Here, we employ classical, reactive atomistic simulations to investigate the structure and mechanical behavior of a wide range of GBs in MoS 2 as a function of temperature. Using a bicrystal MoS 2 geometry, we characterize the atomic structure and calculate the energy of several low-angle GBs. Then, we simulate the tensile deformation behavior of MoS 2 bicrystals at several temperatures. Our results reveal that at temperatures above 100 K, the deformation of MoS 2 bicrystals is characterized by the nucleation of shear bands from GBs that grow, with subsequent loading, into the MoS 2 crystals. At low temperatures, the tensile deformation is characterized by the nucleation and propagation of deformation fronts, resulting in altered bond angles and bond lengths. Quantitative analysis reveals a decrease in the ultimate tensile stress and ultimate failure strain of MoS 2 bicrystals with the increase in temperature. Furthermore, our simulations of the mechanical behavior of metastable GBs reveal that the strength and ductility decrease with the increase in energy of these boundary structures. In broad terms, our work provides future avenues to employ GB engineering as a strategy to tailor the properties of MoS 2 microstructures.

Moore, Robert D. [Lehigh Univ., Bethlehem, PA (Uni↗
DOE OSTI2022

Investigating Abiotic and Biotic Mechanisms of Pyrite Reduction

Pyrite (FeS 2 ) has a very low solubility and therefore has historically been considered a sink for iron (Fe) and sulfur (S) and unavailable to biology in the absence of oxygen and oxidative weathering. Anaerobic methanogens were recently shown to reduce FeS 2 and assimilate Fe and S reduction products to meet nutrient demands. However, the mechanism of FeS 2 mineral reduction and the forms of Fe and S assimilated by methanogens remained unclear. Thermodynamic calculations described herein indicate that H 2 at aqueous concentrations as low as 10 –10 M favors the reduction of FeS 2 , with sulfide (HS – ) and pyrrhotite (Fe 1–x S) as products; abiotic laboratory experiments confirmed the reduction of FeS 2 with dissolved H 2 concentrations greater than 1.98 × 10 –4 M H 2 . Growth studies of Methanosarcina barkeri provided with FeS 2 as the sole source of Fe and S resulted in H 2 production but at concentrations too low to drive abiotic FeS 2 reduction, based on abiotic laboratory experimental data. A strain of M. barkeri with deletions in all [NiFe]-hydrogenases maintained the ability to reduce FeS 2 during growth, providing further evidence that extracellular electron transport (EET) to FeS 2 does not involve H 2 or [NiFe]-hydrogenases. Physical contact between cells and FeS 2 was required for mineral reduction but was not required to obtain Fe and S from dissolution products. The addition of a synthetic electron shuttle, anthraquinone-2,6-disulfonate, allowed for biological reduction of FeS 2 when physical contact between cells and FeS 2 was prohibited, indicating that exogenous electron shuttles can mediate FeS 2 reduction. Here, transcriptomics experiments revealed upregulation of several cytoplasmic oxidoreductases during growth of M. barkeri on FeS 2 , which may indicate involvement in provisioning low potential electrons for EET to FeS 2 . Collectively, the data presented herein indicate that reduction of insoluble FeS 2 by M. barkeri occurred via electron transfer from the cell surface to the mineral surface resulting in the generation of soluble HS – and mineral-associated Fe 1–x S. Solubilized Fe(II), but not HS – , from mineral-associated Fe 1–x S reacts with aqueous HS – yielding aqueous iron sulfur clusters (FeS aq ) that likely serve as the Fe and S source for methanogen growth and activity. FeS aq nucleation and subsequent precipitation on the surface of cells may result in accelerated EET to FeS 2 , resulting in positive feedback between cell activity and FeS 2 reduction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Density functional study of atomic arrangements in CrMnFeCoNi high-entropy alloy and their impact on vacancy formation energy and segregation

Here, using the density functional theory-coupled Monte Carlo approach, we explored the chemical short-range order (SRO) and element segregation in equimolar CrMnFeCoNi alloy. We found that state-of-the-art approximation of random element distribution is only applicable at > 1100 K close to the melting temperature, while the Cr-Cr repulsion driving the system stabilization and accompanying the formation of cubic Cr sublattice, and mild Ni-Ni attraction are the most prominent pair interactions at lower temperatures. Chemical potential and vacancy formation energy calculations indicate that Cr is most sensitive to the local chemical environment, making Cr atoms most stabilized when the preferred SRO is introduced. While the vacancy formation is predicted equally probable among five constituting elements in the random solid solution, Cr and Ni atoms show the lowest vacancy formation energies in the structure with SRO. Furthermore, distinct element segregation was predicted in the vicinity of planar defects, including symmetric tilt grain boundary and stacking fault, which we correlated to the site- and chemistry-dependent atomic volume and bond lengths. It suggests that the local mechanical strain and bond energy induce the SRO development and element segregation: Namely, the system takes advantage of segregation of Ni atoms having large atomic volume or Cr-Cr pairs having elongated bond lengths to fill in the excess volume at defects that relaxes the mechanical strain field and optimizes bond energy distribution. The correlation between the SRO and properties of CrMnFeCoNi alloy needs further investigations, which is expected to greatly help understand and control the properties of high-entropy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Understanding the deformation behavior of the γ rich transformative Fe 38.5 Mn 20 Co 20 Cr 15 Si 5 Cu 1.5 complex concentrated alloy using in situ synchrotron diffraction

In situ tensile testing coupled with synchrotron x-ray diffraction was used to study the deformation behavior of metastability-engineered Fe 38.5 Mn 20 Co 20 Cr 15 Si 5 Cu 1.5 complex concentrated alloy. Monitoring the evolution of phase fraction and strain hardening response allowed the determination of true critical stress for the onset of the transformation-induced plasticity (TRIP) to be ∼375 MPa, preceded by slip starting at ∼255 MPa. In situ EBSD was used to validate the critical stress for transformation at the microstructure level and observe slip traces to confirm prior slip activity before the transformation. Further, a modeling framework based on stacking fault energy (SFE) was developed to predict the critical stress for transformation. Modeling suggested the SFE of the alloy to fall nearly 15 mJ/m 2 , which agrees well with SFE values calculated using synchrotron peak shifting (12 mJ/m 2 ) and thermodynamic calculation (11 mJ/m 2 ). As a result of γ-fcc to ε-hcp phase transformation, new {0002} ε planes emerged parallel to unaligned {111} γ planes with the tensile loading following S-N orientation relationship. Such selective emergence of new diffraction rings corresponding to ε phase is understood based on the reorientation of γ crystals with reference to tensile axis. In conclusion, this approach can be extended to effectively design alloys based on critical stress required for activating different deformation mechanisms to further push the limits of the strength-ductility envelope.

Complex concentrated alloy↗
DOE OSTI2022

Computational discovery of two-dimensional rare-earth iodides: promising ferrovalley materials for valleytronics

Two-dimensional Ferrovalley materials with intrinsic valley polarization are rare but highly promising for valley-based nonvolatile random access memory and valley filter devices. These ferromagnetic materials exhibit valleys at or near the Fermi level with intrinsic magnetism. The strong coupling between magnetism and spin–orbit coupling induces intrinsic valley polarization. Using Kinetically Limited Minimization, an unconstrained crystal structure prediction algorithm, and prototype sampling based on first-principles calculations, we have discovered new Ferrovalley materials, rare-earth iodides RI 2 , where R is a rare-earth element belonging to Sc, Y, or La-Lu, and I is Iodine. The rare-earth iodides are layered and demonstrate either 2H, 1T, or 1T d phase as the ground state in bulk, analogous to transition metal dichalcogenides (TMDCs). The calculated exfoliation energy of monolayers (MLs) is comparable to that of graphene and TMDCs, suggesting possible experimental synthesis. The MLs in the 2H phase exhibit ferromagnetism due to unpaired electrons in d and f orbitals. Throughout the rare-earth series, d bands have valley polarization at K and $\overline{K}$ points in the Brillouin zone in the vicinity of the Fermi level. Large intrinsic valley polarization in the range of 15–143 meV without external stimuli is observed in these Ferrovalley materials, which can be enhanced further by applying an in-plane bi-axial strain. These valleys can selectively be probed and manipulated for information storage and processing, potentially offering superior performance beyond conventional electronics and spintronics. Here we further show that the 2H ferromagnetic phase of RI 2 MLs possesses non-zero Berry curvature and exhibits anomalous valley Hall effect with considerable anomalous Hall conductivity. Our work will incite exploratory synthesis of the predicted Ferrovalley materials and their application in valleytronics and beyond.

2D materials↗
DOE OSTI2020

Thermal / structural analysis of the HB 650 thermal shield

Fermilab’s PIP-II project’s superconducting linear accelerator will drive the next generation of particle accelerators through a revolution in beam intensity. Key to beam intensification are the high efficiencies of niobium-tin superconducting radiofrequency (SRF) cavities operating at cryogenic temperatures near 5 Kelvin. A multifaceted approach is employed to achieve and maintain the extreme temperature. Vacuum provides the first barrier to thermal convection. Physical thermal intercept zones further isolate the exterior shell vacuum vessel at 300 Kelvin from the supercooled beamline. The first thermal intercept lies just inside the exterior vacuum vessel forming the 40 Kelvin zone. This 40K thermal shield is the focus of this investigation. In preparation for operation, the thermal shield is cooled from 300K to 40K in a slow process over 2-1/2 days. The factors limiting the cooling rate are a high thermal gradient which produces thermal strain and high mechanical stress. D ecreasing the time required to reach operational temperatures is the desired research goal. Physical testing data and finite element method (FEM) computer models from the Single Spoke Resonator – 1 (SSR1) and Linac Coherent Light Source (LCLS-II) cryomodules will be evaluated to determine needed design changes. The thermal shield design for the High Beta 650 MHz (HB650) will be modified and analyzed using FEM computer models to determine maximum cooling rate with a target of 50 thermal cycles of life. Maximum allowable stress will be determined through low cycle fatigue calculations.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Electronic, magnetic and structural properties of CoFeVAl and CoFeV 0.5 Mn 0.5 Al

Abstract In this study, we present results of a comprehensive computational and experimental study of CoFeVAl and CoFeV 0.5 Mn 0.5 Al Heusler alloys. It is shown that while CoFeVAl exhibits a fairly large degree of spin polarization, this material is not half-metallic due to the presence of the vanadium spin-down states at the Fermi level. However, replacing 50% of vanadium with manganese results in a nearly half-metallic transition, largely due to the shift of the Fermi level towards occupied states. Moreover, the half-metallicity of CoFeV 0.5 Mn 0.5 Al is rather robust in a wide range of considered mechanical strain and under experimentally observed B2-type atomic disorder, thus making this alloy potentially suitable for practical spintronic applications. Both considered alloys exhibit ferromagnetic alignment at larger lattice constants, aside from a relatively small magnetic moment of vanadium which is anti-aligned with the magnetic moments of Co, Fe and Mn. We have synthesized both CoFeVAl and CoFeV 0.5 Mn 0.5 Al alloys in cubic structure with some structural disorder using arc melting and annealing. The structural and magnetic properties of the synthesized CoFeV 0.5 Mn 0.5 Al alloy are in good agreement with the theoretical calculations but vary slightly from the parent compound.

Physics↗
DOE OSTI2022

Less Common Topological Phenomena in Bulk Materials

"Prediction and subsequent discovery of topological insulators is considered to be one of the main results in condensed matter physics in the last decades. Not surprisingly, it has received major attention of both researchers and funding agencies. This attention is well-deserved; yet, one cannot but note that nearly all this research revolves about essentially the same concept: electronic excitations with linear dispersion, covering, of course, such diverse and intriguing phenomena as topological insulator, bulk Dirac states (or Weyl, if not spin degenerate), Mayorana fermions. In this project, we will address, mainly, other topological phenomena, such as topologically nontrivial magnetic patterns (as, for instance, topological Hall and related phenomena). Specifically, we propose three interrelated trusts: (1) Time-reversal symmetry breaking nonrelativistic antiferromagnets, called altermagnets. These are materials that break Kramers degeneracy of electronic bands, despite having zero net magnetization by symmetry and being fully collinear, and not necessarily non-centrosymmetric. The corresponding band structure is very similar to the band structure in non-centrosymmetric spin-orbital materials, but materials that we propose to study are distinctly different, first and foremost in the sense that despite sharing many aspects of their electronic properties with the latter, they break the time-reversal symmetry without either spin-orbit coupling or lack of inversion symmetry. (2) Topologically nontrivial magnetic spirals. The PI has been engaged with the experimental group of Dr. Ghimire at GMU investigating Dirac materials with helical magnetism, based on stacked magnetic Kagome layers, with a generic formula of RMn6Sn6. In particular, Y Mn6Sn6 demonstrates a component of the Hall effect that is naturally interpreted in terms of a topological spin texture, as well as linear magnetoresistance. Our calculation identify Dirac states that are robust with respect to the spiral formation, and let us derive an advance mean-field model explaining the observed phase diagram. This model predicted four distinct phases, with very distinct properties, which have now been seen in neutron experiments. The same compound is known to demonstrate topological Hall effect in a particular magnetic phase, and only at elevated temperature. Based on our understanding of the phase diagram, we have worked out a phenomenological theory of a chiral (skyrmionic) response to an external magnetic field, similar to the nematic response to external strain in Fe-based superconductors, which is possible in a centrosymmetric lattice and without interplanar Dzyaloshinskii-Moriya interaction. This phenomenological theory agrees quantitatively with the experiment. It is in our plans to research other similar materials for this effect. (3) Search for 3D analogues of Fe-based superconductors. We want to investigate materials that can be viewed as 3D analogues of FeSe. Specifically, we want materials that are good metals and host antiferromagnetism, which can be suppressed by pressure and generate an s-wave superconductivity, as in Fe-based superconductors. We have in mind some candidates already. This work will proceed in close collaboration with the experimental group of Prof. Nirmal Ghimire in the same department, whose expertise lies in sample making, magnetometry and transport measurements of materials with complex magnetic structures."

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Monolayer Sc 2 CF 2 as a Potential Selective and Sensitive NO 2 Sensor: Insight from First-Principles Calculations

Two-dimensional materials with excellent surface–volume ratios and massive reaction sites recently have been receiving attention for gas sensing. With first-principles calculations, we explored the performance of monolayer Sc 2 CF 2 as a gas sensor. We investigated how molecule adsorption affects its electronic structure and optical properties. It is found that a large charge transfer quantity happens between Sc 2 CF 2 and NO 2 , which results from the fact that the lowest unoccupied molecular orbital (LUMO) of NO 2 is below the valence band maximum (VBM) of Sc 2 CF 2 . Moreover, the MD simulation shows that NO 2 can adsorb on the Sc 2 CF 2 surface stably at room temperature. We explored the effect of biaxial strain on the adsorption energy and charge transfer quantity of each system, and the results show that the biaxial strain can enhance both the adsorption energy and charge transfer quantity of the NO 2 system and thus can improve the sensitivity of Sc 2 CF 2 in detecting the NO 2 molecule. Furthermore, we investigated the adsorption behavior and charge transfer of polar polyatomic molecules at the Sc 2 CF 2 surface with h-BN as a substrate, and the results demonstrate that the h-BN substrate can hardly modify the main results. Our result predicts that Sc 2 CF 2 can be a promising selective and sensitive sensor to detect the NO 2 molecule, and could also give a theoretical guide for other terminated MXenes used for gas sensors or detectors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Possible Kitaev Quantum Spin Liquid State in 2D Materials with S=3/2

Quantum spin liquids (QSLs) form an extremely unusual magnetic state in which the spins are highly correlated and fluctuate coherently down to the lowest temperatures, but without symmetry breaking and without the formation of any static long-range-ordered magnetism. Such intriguing phenomena are not only of great fundamental relevance in themselves, but also hold promise for quantum computing and quantum information. Further, among different types of QSLs, the exactly solvable Kitaev model is attracting much attention, with most proposed candidate materials, e.g., RuCl 3 and Na 2 IrO 3 , having an effective $\textit{S}$ = 1/2 spin value. Here, via extensive first-principles-based simulations, we report the investigation of the Kitaev physics and possible Kitaev QSL state in epitaxially strained Cr-based monolayers, such as CrSiTe 3 , that rather possess a $\textit{S}$ = 3/2 spin value. Our study thus extends the playground of Kitaev physics and QSLs to 3$\textit{d}$ transition metal compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Straintronic Effect on Phonon-Mediated Superconductivity of Nb 2 CT 2 (T = O, S, Se, or Te) MXenes

Here, the electronic structures, phonon dispersions, and electron–phonon coupling of Nb 2 CT 2 (T = O, S, Se, or Te) MXenes were investigated via first-principles calculations. Different models of Nb 2 CT 2 were constructed, and the results show that the low-energy models of Nb 2 CT 2 are intrinsic phonon-mediated superconductors. Of the four Nb 2 CT 2 MXenes, Nb 2 CO 2 MXene exhibits the largest superconducting critical temperature ($T_c$) of 14.43 K. The existence of soft modes induced by Kohn anomalies and the contribution of Nb atoms to the Fermi level lead to strong electron–phonon coupling (λ = 0.92) in Nb 2 CO 2 MXene. The $T_c$ of Nb 2 CO 2 is further enhanced by biaxial tensile strain and reaches up to 18.28 K under 4% tensile strain. The predicted $T_c$ of Nb 2 CS 2 is 4.5 K, which is comparable with experimental data. These findings will further stimulate the search for superconducting MXenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unraveling Strain Gradient Induced Electromechanical Coupling in Twisted Double Bilayer Graphene Moiré Superlattices

Moiré superlattices of 2D materials with a small twist angle are thought to exhibit appreciable flexoelectric effect, though unambiguous confirmation of their flexoelectricity is challenging due to artifacts associated with commonly used piezoresponse force microscopy (PFM). For example, unexpectedly small phase contrast (≈8°) between opposite flexoelectric polarizations is reported in twisted bilayer graphene (tBG), though theoretically predicted value is 180°. We report a methodology is developed to extract intrinsic moiré flexoelectricity using twisted double bilayer graphene (tDBG) as a model system, probed by lateral PFM. For small twist angle samples, it is found that a vectorial decomposition is essential to recover the small intrinsic flexoelectric response at domain walls from a large background signal. The obtained threefold symmetry of commensurate domains with significant flexoelectric response at domain walls is fully consistent with the theoretical calculations. Incommensurate domains in tDBG with relatively large twist angles can also be observed by this technique. A general strategy is provided here for unraveling intrinsic flexoelectricity in van der Waals moiré superlattices while providing insights into engineered symmetry breaking in centrosymmetric materials.

36 MATERIALS SCIENCE↗