Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stochastic systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Machine Learning Assisted Development of a Model for the Populations of Convective and Stratiform Clouds

Abstract Traditional parameterizations of the interaction between convection and the environment have relied on an assumption that the slowly varying large‐scale environment is in statistical equilibrium with a large number of small and short‐lived convective clouds. They fail to capture nonequilibrium transitions such as the diurnal cycle and the formation of mesoscale convective systems as well as observed precipitation statistics and extremes. Informed by analysis of radar observations, cloud‐permitting model simulation, theory, and machine learning, this work presents a new stochastic cloud population dynamics model for characterizing the interactions between convective and stratiform clouds, with the goal of informing the representation of these interactions in global climate models. Fifteen wet seasons of precipitating cloud observations by a C‐band radar at Darwin, Australia are fed into a machine learning algorithm to obtain transition functions that close a set of coupled equations relating large‐scale forcing, mass flux, the convective cell size distribution, and the stratiform area. Under realistic large‐scale forcing, the derived transition functions show that, on the one hand, interactions with stratiform clouds act to dampen the variability in the size and number of convective cells and therefore in the convective mass flux. On the other, for a given convective area fraction, a larger number of smaller cells is more favorable for the growth of stratiform area than a smaller number of larger cells. The combination of these two factors gives rise to solutions with a few convective cells embedded in a large stratiform area, reminiscent of mesoscale convective systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Stochastic AC optimal power flow: A data-driven approach

There is an emerging need for efficient solutions to stochastic AC Optimal Power Flow (AC-OPF) to ensure optimal and reliable grid operations in the presence of increasing demand and generation uncertainty. Herein this paper presents a highly scalable data-driven algorithm for stochastic AC-OPF that has extremely low sample requirement. The novelty behind the algorithm’s performance involves an iterative scenario design approach that merges information regarding constraint violations in the system with data-driven sparse regression. Compared to conventional methods with random scenario sampling, our approach is able to provide feasible operating points for realistic systems with much lower sample requirements. Furthermore, multiple sub-tasks in our approach can be easily paralleled and based on historical data to enhance its performance and application. We demonstrate the computational improvements of our approach through simulations on different test cases in the IEEE PES PGLib-OPF benchmark library.

42 ENGINEERING↗
DOE OSTI2020

Analytical Voltage Sensitivity Analysis for Unbalanced Power Distribution System

Large scale integration of distributed energy resources and electric vehicles in a transactive energy environment present new challenges in terms of voltage stability and fluctuations in a power distribution system. The impact of different level of DER/EV penetration on the voltages across the network is typically quantified through voltage sensitivity analyses. Existing methods of voltage sensitivity analysis are computationally expensive and prior efforts to develop analytical approximation lacks generality and have not been effectively validated. The objective of this work is to provide a new analytical method of voltage sensitivity analysis that has low computational cost and also allows for stochastic analysis of voltage change. This paper first derives an analytical approximation of change in voltage at a particular bus due to change in power consumption at other bus in a radial three phase unbalanced power distribution system. Then, the proposed method is shown to be valid for different load configurations, which demonstrates its generality. The results from our analytical approach is validated via classical load flow simulation of the test system based on IEEE 37 bus network. The proposed method is shown to have good accuracy, and computation complexity is of order O(1), compared to O(n3) in classical sensitivity analysis approaches.

Munikoti, Sai↗
DOE OSTI2020

The Dynamics of Interstellar Asteroids and Comets within the Galaxy: An Assessment of Local Candidate Source Regions for 1I/’Oumuamua and 2I/Borisov

The low velocity of interstellar asteroid 1I/’Oumuamua with respect to our galaxy’s local standard of rest implies that it is young. Adopting the young age hypothesis, we assess possible origin systems for this interstellar asteroid and for 2I/Borisov, though the latter’s higher speed means it is unlikely to be young. First, their past trajectories are modeled under gravitational scattering by galactic components (“disk heating”) to assess how far back one can trace them. The stochastic nature of disk heating means that a back integration can only expect to be accurate to within 15 pc and 2 km s{sup −1} at −10 Myr, dropping steeply to 400 pc and 10 km s{sup −1} at −100 Myr, sharply limiting our ability to determine a precise origin. Nevertheless, we show that ’Oumuamua’s origin system likely is currently within 1 kpc of Earth, in the local Orion Arm. Second, we back integrate ’Oumuamua’s trajectory in order to assess source regions, emphasizing young systems and moving groups. Though disk heating allows for only a statistical link to source regions, ’Oumuamua passed through a considerable subset of the Carina and Columba moving groups when those groups were forming. This makes them perhaps the most plausible source region, if ’Oumuamua was ejected during planet formation or via intra-cluster interactions. We find three stars in the Ursa Major group, one brown dwarf, and seven other stars to have plausible encounters with 2I/Borisov, within 2 pc and 30 km s{sup −1}. These encounters’ high relative speeds mean none are likely to be the home of 2I/Borisov.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Benchmarking the semi-stochastic CC( P;Q ) approach for singlet–triplet gaps in biradicals

Here, we recently proposed a semi-stochastic approach to converging high-level coupled-cluster (CC) energetics, such as those obtained in the CC calculations with singles, doubles, and triples (CCSDT), in which the deterministic CC(P;Q) framework is merged with the stochastic configuration interaction Quantum Monte Carlo propagations [J. E. Deustua, J. Shen, and P. Piecuch, Phys. Rev. Lett. 119, 223003 (2017)]. In this work, we investigate the ability of the semi-stochastic CC(P;Q) methodology to recover the CCSDT energies of the lowest singlet and triplet states and the corresponding singlet–triplet gaps of biradical systems using methylene, (HFH) − , cyclobutadiene, cyclopentadienyl cation, and trimethylenemethane as examples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Development of a framework for sequential Bayesian design of experiments: Application to a pilot-scale solvent-based CO 2 capture process

In this paper, a methodology is developed for sequential design of experiments (SDoE) for process systems and applied to a solvent-based CO 2 capture system. In this approach, the prior knowledge of the system is used to prioritize process data collection at specific operating conditions. These data are then incorporated into a Bayesian inference methodology for updating a stochastic model by refining estimations of its underlying parameters, and the updated model is then used to generate the next set of test runs. Thus, the new knowledge obtained from the data is used to guide subsequent iterations of the experimental runs, ensuring that the overall data collection is maximally informative given that most experimental campaigns, especially at pilot or higher-scale plants, are costly, time-consuming, and resource-limited. The test run objective for this work was to minimize the maximum model prediction uncertainty for key output variables, but the methodology is generic and can be readily applied to other test run objectives. This methodology is applied to an aqueous monoethanolamine (MEA) pilot plant campaign at the National Carbon Capture Center (NCCC) in Wilsonville, Alabama, USA. The SDoE framework was utilized for two iterations, while collecting 18 sets of data representing different process conditions, and this resulted in an overall average reduction in uncertainty of approximately 50% in the prediction of CO 2 capture percentage. Moreover, 11 additional data sets were obtained with variation of absorber packing height for further model validation. This work shows the capability of the SDoE framework to maximize learning given limited resources, allowing for the reduction of model uncertainty, which is of great importance for many applications including reduction of technical risk associated with scale-up and economic analysis.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

ExaSGD: 2022 Kernel Thrust Activities

The Kernel Thrust milestone ADSE22-407 covers the development of device-capable optimization algorithms and solvers technologies required by the ExaSGD project’s software stack in order to solve security-constrained alternating current optimal power flow (SC-ACOPF) problems on emerging exascale architectures. To this extent, in FY22 the main objective of the Kernel Thrust was (i) provide sparse optimization solver that runs efficiently on hardware accelerator devices (i.e., NVIDIA and AMD GPUs) to perform intra-node computations, (ii) strengthen the reliability and increase the performance of the mixed-dense sparse (MDS) solver of HiOp for deployment on the FY22 target architectures, Summit and Crusher, and (iii) increase performance by improving the mathematical algorithm and refining the parallel MPI-based implementation of the coarse-grain parallel solver HiOp-PriDec for capabilities deployment on the FY22 target architectures, Summit and Crusher. This document presents the developments and contributions done by the Kernels Thrust Team in FY22 toward completion of the above-mentioned objectives. These contributions progressed along four main development (sub)thrusts: (1) Design and implementation of a sparse optimization solver for use on hardware accelerators; (2) Improvement of the mathematical algorithm and of the parallel implementation of HiOp-PriDec to ensure readiness and efficient coarse-grain parallelism for FY23 target exascale machine; and (3) Support Software and Application Development Thrusts of the exaSGD project in their deployment of the project’s software stack on AMD- and NVIDIA-based architectures. The development of the sparse optimization solver (thrust 1 above) was new in FY22 and resulted in a new sparse solver in HiOp (available as of version 0.6). The second development thrust was a continuation of the efforts from FY21 and improved the mathematical algorithm and the communication strategy of the HiOp-PriDec solver. The last developement thrust is a large collaborative effort. Namely, the project’s teams from multiple labs (LLNL, PNNL, ORNL, and NREL) performed large-scale demonstration of the ExaSGD software stack, namely the optimization solvers of HiOp interfaced with the modeling front-end ExaGO and the stochastic sampler PowerScenarios. These demonstration efforts solved large-scale instances of the SC-ACOPF challenge problem of medium network sizes (10, 000-bus system) and large number of contingencies on Summit (NVIDIA accelerators) and Crusher (AMD accelerators) systems at ORNL.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Evaluation and Optimization of Well Completion Options for the Utah FORGE Site

Orientation and completion for well pairs that have been subjected to multi-zonal stimulation play a critical role in the long-term performance of an Enhanced Geothermal Reservoir. Enhanced geothermal systems often rely on preferential flow along fractures between well injection and production locations. Modeling this preferential flow using discrete fracture networks (DNF) relies on stochastic realizations of the DFN based on geological sampling. Here we present the development of a stochastic optimization methodology to determine well completion options in a discrete fracture network based on using parallel subset simulation. Stochastic optimization will provide insight into regions where placements of the injection and production wells are optimal. An example optimization of well-pair location optimization based on a deterministic-stochastic DFN model representing FORGE follows a discussion of the theory.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Risk-averse optimization for resilience enhancement of complex engineering systems under uncertainties

With the growth of complexity and extent, large scale interconnected network systems, e.g., transportation networks or infrastructure networks, become more vulnerable to external disturbances. Hence, managing potential disruptive events during the design, operating, and recovery phase of an engineered system and therefore improving the system’s resilience is an important yet challenging task. Here, to ensure system resilience after the occurrence of failure events, this study proposes a mixed-integer linear programming (MILP) based restoration framework using heterogeneous dispatchable agents. The scenario-based stochastic optimization (SO) technique is adopted to deal with the inherent uncertainties imposed on the recovery process from nature. Moreover, different from conventional SO using deterministic equivalent formulations, the CVaR risk measure is implemented for this study because of the temporal sparsity of the decision making in applications such as the recovery from extreme events. The resulting restoration framework involves a large-scale MILP problem and thus an adequate decomposition technique i.e. modified Lagrangian dual decomposition, is also employed to achieve tractable computational complexity. Case study results based on the IEEE 37-bus test feeder demonstrate the benefits of using the proposed framework for resilience improvement as well as the advantages of adopting SO formulations.

42 ENGINEERING↗
DOE OSTI2020

Measurement Uncertainty in One-Of-A-Kind Event Data Analysis

A golden standard in science is to repeat an experiment a statistically significant number of times, recording data using the same set of detectors and the same data analysis methodology. In such case experimental error includes both the range of true values generated by repetitions of the experiment, and measurement uncertainty caused by the detector. They are independent. It is a huge and too frequently used simplification, to assume that one can measure multiple repetitions of an identical experiment, resulting in identical true experimental value. Repetitions, as similar is it is experimentally achievable, have unavoidable built-in differences resulting in a range of the true values rather than in a single value. When modern, very sensitive and well calibrated measurement systems are used, this range is not negligible, and sometimes dominates over the measurement uncertainty. Range of true values depends on built-in differences in physics of the experiment. Stochastic physical processes result typically in a broader range of true values than non-stochastic processes do. Measurement uncertainty depends on a measurement method (properties of the detector not of the experiment). Modern measurement methods, including digital ones, frequently make the measurement uncertainty very small. When data from one–of –a kind experiment are analyzed, only the measurement uncertainty is reported. It provides no information about the range of true experimental values, neither about reliability of a reported data point. Reliability of a data point is in general independent from its measurement uncertainty. However, in practice reliable measurement methods frequently have high measurement uncertainty, while low reliability methods are applied to limit measurement uncertainty. Comparison of reliable data with high measurement uncertainty to not so reliable data measured with low uncertainty is discussed – in different scenarios different data analysis methods are applicable. Methods for data analysis from an experiment repeated statistically significant number of times are very well developed. They do not require a detailed expertise in physics of an experiment, nor in the properties of the measurement system used, and meaning of the reported uncertainty is well understood in any scientific community. It all changes when data from one-of-a-kind experiment is analyzed. Analyst’s expertise is required both in the physics of the experiment and in all aspects of the measurement system, all possible malfunctions. Data users must remember that only measurement uncertainty is reported from any one-of-a-kind experiment. Theory with simulations may provide estimation of expected built-in differences in the experiment, and by this of expected range of true values for a given experiment; yet measurement uncertainty can never be used in place of the range of true experimental values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Finite-volume pionless effective field theory for few-nucleon systems with differentiable programming

Finite-volume pionless effective field theory provides an efficient framework for the extrapolation of nuclear spectra and matrix elements calculated at finite volume in lattice QCD to infinite volume, and to nuclei with larger atomic number. In this work, it is demonstrated how this framework may be implemented via a set of correlated Gaussian wave functions optimized using differentiable programming and via solution of a generalized eigenvalue problem. This approach is shown to be significantly more efficient than a stochastic implementation of the variational method based on the same form of correlated Gaussian wave functions, yielding comparably accurate representations of the ground-state wave functions with an order of magnitude fewer terms. The efficiency of representation allows such calculations to be extended to larger systems than in previous work. Further, the method is demonstrated through calculations of the binding energies of nuclei with atomic number A ϵ {2,3,4} in finite volume, matched to lattice QCD calculations at quark masses corresponding to m π = 806 MeV, and infinite-volume effective field theory calculations of A ϵ {2,3,4,5,6} systems based on this matching.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Convective and turbulent motions in non-precipitating Cu. Part 1: Method of separation of convective and turbulent motions

Atmospheric motions in clouds and cloud surroundings have a wide range of scales, from several kilometers to centimeters. These motions have different impacts on cloud dynamics and microphysics. Larger-scale motions (hereafter referred to as convective motions) are responsible for mass transport over distances comparable with cloud scale, while motions of smaller scales (hereafter referred to as turbulent motions) are stochastic and responsible for mixing and cloud dilution. This distinction substantially simplifies the analysis of dynamic and microphysical processes in clouds. The present research is Part I of the study aimed at describing the method for separating the motion scale into a convective component and a turbulent component. An idealized flow is constructed, which is a sum of an initially prescribed field of the convective velocity with updrafts in the cloud core and downdrafts outside the core, and a stochastic turbulent velocity field obeying the turbulent properties, including the -5/3 law and the 2/3 structure function law. A wavelet method is developed allowing separation of the velocity field into the convective and turbulent components, with parameter values being in a good agreement with those prescribed initially. The efficiency of the method is demonstrated by an example of a vertical velocity field of a cumulus cloud simulated using the System for Atmospheric Modeling (SAM) with bin microphysics and resolution of 10 m. It is shown that vertical velocity in clouds indeed can be represented as a sum of convective velocity (forming zone of cloud updrafts and subsiding shell) and a stochastic velocity obeying laws of homogeneous and isotropic turbulence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

An indirect approach to optimize the reaction rates of thermal NO formation for diesel engines

With stringent emission regulations, it has become more important for modern diesel engine manufacturers to accurately predict engine-out nitrogen oxide (NO x ) emissions across a wide range of operating conditions. Thermal NO is the major source of engine-out NO x in modern diesel engines. For thermal NO formation, several earlier studies have recommended the forward and reverse reaction rate coefficients of the rate-limiting reaction (O + N 2 ⇌ NO + N). However, due to deficiencies in sub-models and inadequacies of reduced chemical mechanisms to represent diesel combustion, these recommended values more often than not need to be adjusted in reduced order combustion models to accurately predict engine-out NO x . Hence, in this work a systematic and computationally efficient approach has been proposed to streamline the process of determining the optimum reaction rate coefficients. Here, to develop the optimization approach, four different production diesel engines with different operating conditions in terms of speed, load, and exhaust-gas recirculation have been considered. Numerical simulations have been performed using a detailed zero-dimensional velocity-composition-frequency transported probability density function (0D-VCF-tPDF) model that uses hundreds of notional particles to capture in-cylinder stratification. Four different combinations of hydrocarbon and NO x chemical mechanisms were used to represent chemistry. It was found that for the rate-limiting reaction, the pre-exponent factors (A f1 , A r1 ) and activation energies (E A,f1 , E A,r1 ) of the forward and reverse reaction rates follow a linear band in A f1 - E A,f1 and A r1 - E A,r1 space where predicted engine-out NO x match the measured values closely. By encompassing such bands from different engines and considering constraints on activation energies, a reduced search domain of pre-exponent factors and activation energies was constructed that is expected to be applicable to any diesel engine. Eventually, computationally efficient three-line and one-line search approaches were proposed to determine the optimum values of the pre-exponent factors and activation energies that led to a minimum error between measured and predicted engine-out NO x . Finally, these three-line and one-line NO x optimization approaches were applied to a fifth production diesel engine for which the 0D-VCF-tPDF model showed a very good predictive performance in terms of predicting peak pressure, 50% burn rate, and engine-out NO x when compared to measured and 3D-CFD values.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Optimized Renewable Energy Integration for EV High-Power Dynamic Wireless Charging Systems

Dynamic wireless charging for electric vehicles is an emerging technology to reduce on-board battery size and extend driving range. Due to its unique characteristic of vehicle-speed-related pulse-like load profile, the high-power dynamic wireless charging system (DWCS) introduces high stress to the utility grid. In this paper, an optimization model for renewable energy integration in the DWCS is proposed to mitigate the grid impact and minimize the operation costs of the whole system. As the load profile of DWCS is related to the traffic volume and various approaching vehicle speeds, the annual average daily traffic data and a stochastic model are used to develop 24-hour load profile of DWCS. To find a tradeoff between grid impact mitigation and operation costs minimization, relationships among power demand from power grid, photovoltaic (PV) capacity, wind energy (WE) capacity and energy storage (ES) capacity are analyzed, and the optimization objective and constraints are developed. Numerical simulation results demonstrate that energy storage integration can greatly mitigate the grid impact of DWCS, and optimal ratio of PV and WE can significantly reduce the operation cost of DWCS.

Zeng, Rong↗
DOE OSTI2020

Fat Crayon Toolkit

The Fat Crayon Toolkit (FCT) provides python modules for assisting in the design and visualization of boreholes and tunnels and their relationship with natural features such as fractures. Distances of closest approach among the boreholes can be calculated, along with other key design metrics. Additionally, the shear propensity of natural fractures (either deterministic or stochastic) can be visualized in either 3D (as VTK files) or in 2D (stereonets). The example provided demonstrates a test bed developed for the Enhanced Geothermal Systems (EGS) Collab project. This material is based upon work supported by the Geothermal Office of the Department of Energy and the Sanford Underground Research Facility and was prepared by LLNL under Contract DE-AC52-07NA27344.

Morris, JosephP.↗
DOE OSTI2022

Distribution Function Instead of Steady-State Assumption in Time-Series Simulation

The quasi-steady-state assumption in time-series simulation is inadequate to model phenomena of interest to energy system integration such as inverter clipping, sell-back of excess electricity to a utility and utility hosting capacity, and battery throughput. Researchers are working on stochastic modeling, higher-resolution time series data, and machine learning approaches to address this need. This poster describes a distribution function that allows a maximum value, minimum value, and shape to the curve that can vary within each time-step based only on data inputs at the resolution of that time step (eg. Hourly). The distribution function is not used to synthesize high-resolution data, rather scalar integrals are used to calculate the quantities of interest within each time step. The form of the distribution function shows significant reduction in error when compared to 1 minute data and commercial software employing the distribution function (HOMER Pro version 14.3 and higher) shows a much improved estimate of inverter clipping in an example.

battery↗
DOE OSTI2022

Process-oriented stochastic perturbations applied to the parametrization of turbulence and shallow convection for ensemble prediction

Weather forecasting nowadays often requires some estimation of uncertainties associated with the output of meteorological models, in order to better inform decision making, especially in the context of intense weather events. Ensemble prediction systems provide such information through sets of possible scenarios which are designed to represent various uncertainty sources, including model uncertainties. A wide variety of methods have been proposed to estimate model uncertainties, among which perturbation methods targeting uncertain processes are a promising research field. Here, we focus on the representation of small-scale variability by process-oriented perturbation schemes applied to two key physical processes, namely turbulence and shallow convection. The perturbations are applied to a single-column version of the convection-permitting AROME model, in three idealized boundary-layer cases. Large-eddy simulations (LESs) of the same cases serve as a reference for the subgrid variability that has to be represented, and the results are also compared to those given by the Stochastically Perturbed Parametrization Tendencies (SPPT) method, which is a method commonly used by weather forecast centres to represent model uncertainty. The spread produced by our process-oriented perturbations of turbulence and shallow convection does not represent all the small-scale variability implied by the LESs for temperature and humidity. However, it is of a similar order of magnitude for the wind, thanks to perturbations generated by the stochastic turbulence scheme. The dispersion is structurally different from what is obtained with SPPT. It is non-negligible in the lower levels, where SPPT perturbations are usually suppressed because of numerical instabilities, indicating a possible complementarity between the schemes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Stochastic density functional theory: Real- and energy-space fragmentation for noise reduction

Stochastic density functional theory (sDFT) is becoming a valuable tool for studying ground-state properties of extended materials. The computational complexity of describing the Kohn-Sham orbitals is replaced by introducing a set of random (stochastic) orbitals leading to linear and often sub-linear scaling of certain ground-state observables at the account of introducing a statistical error. Schemes to reduce the noise are essential, for example, for determining the structure using the forces obtained from sDFT. Recently, we have introduced two embedding schemes to mitigate the statistical fluctuations in the electron density and resultant forces on the nuclei. Both techniques were based on fragmenting the system either in real space or slicing the occupied space into energy windows, allowing for a significant reduction in the statistical fluctuations. For chemical accuracy, further reduction of the noise is required, which could be achieved by increasing the number of stochastic orbitals. However, the convergence is relatively slow as the statistical error scales as 1 / N χ according to the central limit theorem, where N χ is the number of random orbitals. In this paper, we combined the embedding schemes mentioned above and introduced a new approach that builds on overlapped fragments and energy windows. The new approach significantly lowers the noise for ground-state properties, such as the electron density, total energy, and forces on the nuclei, as demonstrated for a G-center in bulk silicon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗