Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Single-crystal NMC622 from combustion-assisted solid-state synthesis: Tunable particle size, voltage-dependent stability, and Li-ion diffusion

Cost-effective and scalable synthesis of single-crystal lithium–metal-oxide cathodes with controlled size and morphology remains challenging for advancing high-performance lithium-ion batteries. Here, we demonstrate a solution combustion–assisted solid-state method for producing single-crystal NMC622 with tunable particle size at various lithium stoichiometries. Structural and electronic characteristics were probed using synchrotron-XANES, EXAFS, XRD and XPS, confirming well-defined coordination environments and phase purity up to Li ≈ 1.3. The electrochemical behavior of LixNMC (x = 1.0 and 1.3) single crystals was evaluated across 2.8–4.3 V and 2.8–4.7 V windows to elucidate the effects of lithium content and operating voltage. At 2.8–4.3V, Li1.3NMC exhibits higher initial capacity due to its larger lithium inventory, while Li1.0NMC shows superior long-term retention driven by its larger crystal size and reduced structural distortion. Increasing the cutoff voltage to 4.7 V enhances the initial capacity of both compositions by 17–25%, but long-term capacity retention ultimately converges to values comparable to those at 4.3 V due to voltage-induced degradation, where Li+ diffusion constant remains lying ranging from 10−12 –10−11 cm2s−1. Overall, this study establishes a scalable combustion-assisted route for synthesizing tunable single-crystal NMC622 and highlights the interplay between lithium stoichiometry, particle size, and voltage window in governing cathode stability.

Roy, Subrata C [Jackson State University]↗

Photosensitive structures based on ZnP{sub 2} single crystals of monoclinic and tetragonal modifications: Fabrication and properties

The method of gas-phase resublimation is used to grow the single-crystals of monoclinic and tetragonal modifications whose composition are identical and corresponds to the ZnP{sub 2} stoichiometry. The crystal-lattice parameters are determined and natural facets of the crystals of both modifications are identified. The obtained single crystals were used to fabricate for the first time the Schottky barriers and welded point structures; the latter exhibited rectification and the photovoltaic effect. On the basis of the first studies of photosensitivity of obtained structures subjected to the natural and linearly polarized radiation, the character of interband transitions is suggested, the values of the band gap are determined, and the influence of the position ordering of atoms on the structures' properties is observed. The phenomenon of natural photopleochroism observed in the structures based on oriented ZnP{sub 2} single crystals were studied. It is concluded that it is possible to use the zinc diphosphide in photoconversion of the intensity and polarization of optical radiation.

36 MATERIALS SCIENCE↗

Single Crystal Growth of Relaxor Ferroelectric Ba 2 PrFeNb 4 O 15 by the Optical Floating Zone Method

Uniaxial tungsten bronzes have received increasing interest because of their potential application as lead-free ferroelectrics as well as their flexibility-via chemical substitution. Here we demonstrate growth of single crystals of one such material, Ba 2 PrFeNb 4 O 15 , which possesses the tetragonal tungsten bronze structure, by the optical floating zone method. The challenge of this growth is to control the stability of the molten zone which allows the growth to persist for a long enough time to achieve large volume single crystals. Our work reveals that the use of a slight overpressure of air allows the molten zone to be maintained up to 7 h at a traveling speed of 4 mm/h. The obtained crystals were studied using high-resolution single crystal scattering, powder X-ray diffraction, and dielectric measurements. We find that Ba 2 PrFeNb 4 O 15 possesses a rather complex average structure with a monoclinic symmetry in a P 112/ m space group and unit cell parameters of a = 12.49188(8) Å, b = 12.49232(8) Å, c = 3.92863(1) Å, and γ = 90.056 °, with an additional incommensurate superstructural modulation superimposed. The temperature dependence of dielectric properties has been investigated by comparing as-grown, O 2 -annealed, and Ar-annealed samples. A broad relaxation dielectric peak is observed around 150 K for the O 2 -annealed sample, indicating a typical relaxor behavior below 150 K. A larger dielectric permittivity (ε' ≈ 1300) than those of corresponding ceramics (up to ε' ≈ 200) is found in the oxygen annealed crystals. In conclusion, we suggest that as-grown single crystals are oxygen deficient and that the oxygen vacancies can be eliminated by an oxygen annealing treatment.

36 MATERIALS SCIENCE↗

Single Crystal Silicon Instrument Mirrors

The goals for the fabrication of single crystal silicon instrument mirrors include the following: 1) Develop a process for fabricating lightweight mirrors from single crystal silicon (SCS); 2) Modest lightweighting: 3X to 4X less than equivalent solid mirror; 3) High surface quality, better than lambda/40 RMS @ 633nm; 4) Significantly less expensive than current technology; and 5) Negligible distortion when cooled to cryogenic temperatures.

Bly, Vince↗

Quasi-single-crystal (001) SrTiO3 templates on Si

The integration of high quality multifunctional oxides on semiconductor devices requires single-crystal-like templates directly on silicon that match with thin film heterostructures. We report the fabrication of quasi-single-crystal (001) SrTiO3 templates on (001) Si by annealing MBE-grown epitaxial SrTiO3 films at 900oC in oxygen. The FWHM of (002) SrTiO3 rocking curve is less than 0.006o which is much narrower than SrTiO3 bulk single crystals. Atomically smooth TiO2-terminated surface is obtained by buffered-HF etching, which presents the possibility of creating novel oxide heterointerfaces on Si platform. Epitaxial SrRuO3 films grown on the etched template exhibit a superior crystalline quality to those grown on a untreated template and an atomically smooth surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Study of Single Crystal Fatigue Failure Criteria

This paper presents the results of a study whose objective was to study the applicability of different failure equations in modeling low cycle fatigue (LCF) test data for single crystal test specimens. A total of four failure criteria were considered in this study. One of the failure equations was developed by Pratt & Whitney and is based on normal and shear strains on the primary crystallographic slip planes of the single crystal material. Other failure equations considered are based on isotropic criteria. Because these failure equations were originally developed for isotropic materials such as structural steel, they were modified to be applicable to the single crystal slip systems of the LCF specimen material. By observing how closely the various equations were able to reduce the scatter in the LCF test data, the applicability of those equations in modeling the LCF test data was assessed. It is desired to subsequently use the failure equation with the highest correlation in the development of a new single crystal failure criterion for the Alternative Turbopump Development (ATD) for the space shuttle main engine (SSME) High Pressure Fuel Turbopump (HPFTP).

Sayyah, Tarek↗

The crystal structures of Fe-bearing MgCO 3 sp 2 - and sp 3 -carbonates at 98 GPa from single-crystal X-ray diffraction using synchrotron radiation

The crystal structure of MgCO 3 -II has long been discussed in the literature where DFT-based model calculations predict a pressure-induced transition of the carbon atom from the sp 2 to the sp 3 type of bonding. We have now determined the crystal structure of iron-bearing MgCO 3 -II based on single-crystal X-ray diffraction measurements using synchrotron radiation. We laser-heated a synthetic (Mg 0.85 Fe 0.15 )CO 3 single crystal at 2500 K and 98 GPa and observed the formation of a monoclinic phase with composition (Mg 2.53 Fe 0.47 )C 3 O 9 in the space group C 2/ m that contains tetrahedrally coordinated carbon, where CO 4 4- tetrahedra are linked by corner-sharing oxygen atoms to form three-membered C 3 O 9 6- ring anions. The crystal structure of (Mg 0.85 Fe 0.15 )CO 3 (magnesium iron carbonate) at 98 GPa and 300 K is reported here as well. In comparison with previous structure-prediction calculations and powder X-ray diffraction data, our structural data provide reliable information from experiments regarding atomic positions, bond lengths, and bond angles.

Chariton, Stella (ORCID:0000000155220498)↗

High Magnetic Anisotropy and Magnetocaloric Effects in Single-Crystal Cr 2 Te 3

Here, we report a systematic investigation of anisotropic magnetocaloric effects in single-crystal Cr 2 Te 3 . Single-crystal samples are synthesized by chemical vapor transport and characterized by X-ray and Laue diffraction methods. The maximum magnetic entropy change –ΔS M max is 4.50 J kg –1 K –1 for the easy c-axis (3.36 J kg –1 K –1 for the hard axis along ab-plane), and the relative cooling power (RCP) is 296.7 J kg –1 for the easy c-axis (183.84 J kg –1 for the hard axis along ab-plane) for a magnetic field change of 9 T near the Curie temperature. The magneto-crystalline anisotropy constant K u is estimated to be 580.12 kJ m –3 at 140 K, decreasing to 148.60 kJ m –3 at 168 K. Meanwhile, the maximum of the rotational magnetic entropy change –ΔS M R (T, H) between the c-axis and the ab-plane is about 1.14 J kg –1 K –1 for magnetic-field change of 9 T. The critical exponents are estimated by analyzing magnetocaloric effects, which indicate a 2D-Ising type magnetic system. The accuracy of estimated critical exponents is verified by scaling analysis. The maximum magnetic entropy change –ΔS M max ≈ 5.25 J kg –1 K –1 (along the c-axis) and the corresponding adiabatic temperature change ΔT ad ≈ 3.31 K (along the c-axis) are estimated by analyzing heat capacity measurements with a magnetic field up to 9 T.

36 MATERIALS SCIENCE↗

Periodic chiral magnetic domains in single-crystal nickel nanowires

We report here on experimental and computational investigations of the domain structure of single-crystal Ni nanowires (NWs). The ${\sim}200\times{}200\times{}8000\mathrm{n}{\mathrm{m}}^{3}$ Ni NWs were grown by a thermal chemical vapor deposition technique that results in single-crystal structures. Magnetoresistance measurements of individual NWs suggest the average magnetization points largely off the NW long axis at zero field. X-ray photoemission electron microscopy images obtained at room temperature show a well-defined periodic magnetization pattern along the surface of the nanowires with a period of ${{\lambda}}_{\mathrm{avg}}=239\pm{}37\mathrm{nm}$. Finite element micromagnetic simulations reveal that when the material parameters of the modeled system match those of nickel crystal at $T=10\mathrm{K}$, an oscillatory magnetization configuration with a period closely matching experimental observation (${\lambda}=222\mathrm{nm}$) is obtainable at remanence. This magnetization configuration involves a periodic array of alternating chirality vortex domains distributed along the length of the NW. Vortex formation is attributable to the relatively high cubic anisotropy of the single crystal Ni NW system at $T=10\mathrm{K}$ and its reduced structural dimensions. The periodic alternating chirality vortex state is a topologically protected metastable state, analogous to an array of 360° domain walls in a thin strip. Simulations show that other remanent states are also possible, depending on the field history. At room temperature ($T=273\mathrm{K}$), simulations show vortices are no longer stable due to the expected reduced cubic anisotropy of the system, suggesting a disparity between the fabricated and modeled nanowires. Negative uniaxial anisotropy and magnetoelastic effects in the presence of compressive biaxial strain are shown to promote and restore formation of vortices at room temperature.

36 MATERIALS SCIENCE↗

Shock compression modeling of metallic single crystals: comparison of finite difference, steady wave, and analytical solutions

Background: The shock response of metallic single crystals can be captured using a micro-mechanical description of the thermoelastic-viscoplastic material response; however, using a such a description within the context of traditional numerical methods may introduce a physical artifacts. Advantages and disadvantages of complex material descriptions, in particular the viscoplastic response, must be framed within approximations introduced by numerical methods. Methods: Three methods of modeling the shock response of metallic single crystals are summarized: finite difference simulations, steady wave simulations, and algebraic solutions of the Rankine-Hugoniot jump conditions. For the former two numerical techniques, a dislocation density based framework describes the rate- and temperature-dependent shear strength on each slip system. For the latter analytical technique, a simple (two-parameter) rate- and temperature-independent linear hardening description is necessarily invoked to enable simultaneous solution of the governing equations. For all models, the same nonlinear thermoelastic energy potential incorporating elastic constants of up to order 3 is applied. Results: Solutions are compared for plate impact of highly symmetric orientations (all three methods) and low symmetry orientations (numerical methods only) of aluminum single crystals shocked to 5 GPa (weak shock regime) and 25 GPa (overdriven regime). Conclusions: For weak shocks, results of the two numerical methods are very similar, regardless of crystallographic orientation. For strong shocks, artificial viscosity affects the finite difference solution, and effects of transverse waves for the lower symmetry orientations not captured by the steady wave method become important. The analytical solution, which can only be applied to highly symmetric orientations, provides reasonable accuracy with regards to prediction of most variables in the final shocked state but, by construction, does not provide insight into the shock structure afforded by the numerical methods.

36 MATERIALS SCIENCE↗

High field electron paramagnetic resonance spectroscopy under ultrahigh vacuum conditions—A multipurpose machine to study paramagnetic species on well defined single crystal surfaces

A new ultrahigh vacuum (UHV) electron paramagnetic resonance (EPR) spectrometer operating at 94 GHz to investigate paramagnetic centers on single crystal surfaces is described. It is particularly designed to study paramagnetic centers on well-defined model catalysts using epitaxial thin oxide films grown on metal single crystals. The EPR setup is based on a commercial Bruker E600 spectrometer, which is adapted to ultrahigh vacuum conditions using a home made Fabry Perot resonator. The key idea of the resonator is to use the planar metal single crystal required to grow the single crystalline oxide films as one of the mirrors of the resonator. EPR spectroscopy is solely sensitive to paramagnetic species, which are typically minority species in such a system. Hence, additional experimental characterization tools are required to allow for a comprehensive investigation of the surface. The apparatus includes a preparation chamber hosting equipment, which is required to prepare supported model catalysts. In addition, surface characterization tools such as low energy electron diffraction (LEED)/Auger spectroscopy, temperature programmed desorption (TPD), and infrared reflection absorption spectroscopy (IRAS) are available to characterize the surfaces. A second chamber used to perform EPR spectroscopy at 94 GHz has a room temperature scanning tunneling microscope attached to it, which allows for real space structural characterization. The heart of the UHV adaptation of the EPR experiment is the sealing of the Fabry-Perot resonator against atmosphere. To this end it is possible to use a thin sapphire window glued to the backside of the coupling orifice of the Fabry Perot resonator. With the help of a variety of stabilization measures reducing vibrations as well as thermal drift it is possible to accumulate data for a time span, which is for low temperature measurements only limited by the amount of liquid helium. Test measurements show that the system can detect paramagnetic species with a density of approximately 5 × 10{sup 11} spins/cm{sup 2}, which is comparable to the limit obtained for the presently available UHV-EPR spectrometer operating at 10 GHz (X-band). Investigation of electron trapped centers in MgO(001) films shows that the increased resolution offered by the experiments at W-band allows to identify new paramagnetic species, that cannot be differentiated with the currently available methodology.

36 MATERIALS SCIENCE↗

Method for the growth of large low-defect single crystals

A method and the benefits resulting from the product thereof are disclosed for the growth of large, low-defect single-crystals of tetrahedrally-bonded crystal materials. The process utilizes a uniquely designed crystal shape whereby the direction of rapid growth is parallel to a preferred crystal direction. By establishing several regions of growth, a large single crystal that is largely defect-free can be grown at high growth rates. This process is particularly suitable for producing products for wide-bandgap semiconductors, such as SiC, GaN, AlN, and diamond. Large low-defect single crystals of these semiconductors enable greatly enhanced performance and reliability for applications involving high power, high voltage, and/or high temperature operating conditions.

Powell, J. Anthony↗

Single-crystal X-ray diffraction at megabar pressures and temperatures of thousands of degrees

The most reliable information about crystal structures and their response to changes in pressure and temperature is obtained from single-crystal diffraction experiments. We have developed a methodology to perform single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells and demonstrate that structural refinements and accurate measurements of the thermal equation of state of metals, oxides and silicates from single-crystal intensity data are possible in pressures ranging up to megabars and temperatures of thousands of degrees. A new methodology was applied to solve the in situ high pressure, high temperature structure of iron oxide and study structural variations of iron and aluminum bearing silicate perovskite at conditions of the Earth's lower mantle.

36 MATERIALS SCIENCE↗

A Successful Synthesis of the CoCrFeNiAl0.3 Single-Crystal, High-Entropy Alloy by Bridgman Solidification

For the first time, a face-centered-cubic, single-crystal CoCrFeNiAl{sub 0.3} (designated as Al0.3), high-entropy alloy (HEA) was successfully synthesized by the Bridgman solidification (BS) method, at an extremely low withdrawal velocity through a constant temperature gradient, for which it underwent two BS steps. Specially, at the first BS step, the alloy sample underwent several morphological transitions accompanying the crystal growth from the melt. This microstructure evolves from as-cast dendrites, to equiaxed grains, and then to columnar crystals, and last to the single crystal. In particular, at the equiaxed-grain region, some visible annealing twins were observed, which indicates a low stacking fault energy of the Al0.3 alloy. Although a body-centered- cubic CoCrFeNiAl (Al1) HEA was also prepared under the same conditions, only a single columnar-crystal structure with instinctively preferential crystallographic orientations was obtained by the same procedure. A similar morphological transition from dendrites to equiaxed grains occurred at the equiaxed-grain region in Al1 alloy, but the annealing twins were not observed probably because a higher Al addition leads to a higher stacking fault energy for this alloy.

36 MATERIALS SCIENCE↗

Ultratough single crystal boron-doped diamond

The invention relates to a single crystal boron doped CVD diamond that has a toughness of at least about 22 MPa m.sup.1/2. The invention further relates to a method of manufacturing single crystal boron doped CVD diamond. The growth rate of the diamond can be from about 20-100 .mu.m/h.

36 MATERIALS SCIENCE↗

Effect of ultrasound on the growth striation and electrical properties of Ga{sub 0.03}In{sub 0.97}Sb single crystals

The growth striation of impurity segregation and electrical properties of Ga{sub 0.03}In{sub 0.97}Sb single crystals grown by the Czochralski method in an ultrasonic field have been investigated. It is established that ultrasonic irradiation of the melt during growth significantly decreases the growth striation (in particular, it eliminates striations spaced at a distance of more than 14 {mu}m). The Ga{sub 0.03}In{sub 0.97}Sb single crystals grown in an ultrasonic field had a higher charge-carrier mobility and thermoelectric power in comparison with the single crystals grown without ultrasound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗