Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SURFACE DISTORTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Elongation Transducer For Tensile Tests

Extensometer transducer measures elongation of tensile-test specimen with negligible distortion of test results. Used in stress-versus-strain tests of small specimens of composite materials. Clamping stress distributed more evenly. Specimen clamped gently between jaw and facing surface of housing. Friction force of load points on conical tips onto specimen depends on compression of spring, adjusted by turning cover on housing. Limp, light nylon-insulated electrical leads impose minimal extraneous loads on measuring elements.

Roberts, Paul W.↗
NASA NTRS1997

Demonstration of mechanical connections between integrins, cytoskeletal filaments, and nucleoplasm that stabilize nuclear structure

We report here that living cells and nuclei are hard-wired such that a mechanical tug on cell surface receptors can immediately change the organization of molecular assemblies in the cytoplasm and nucleus. When integrins were pulled by micromanipulating bound microbeads or micropipettes, cytoskeletal filaments reoriented, nuclei distorted, and nucleoli redistributed along the axis of the applied tension field. These effects were specific for integrins, independent of cortical membrane distortion, and were mediated by direct linkages between the cytoskeleton and nucleus. Actin microfilaments mediated force transfer to the nucleus at low strain; however, tearing of the actin gel resulted with greater distortion. In contrast, intermediate filaments effectively mediated force transfer to the nucleus under both conditions. These filament systems also acted as molecular guy wires to mechanically stiffen the nucleus and anchor it in place, whereas microtubules acted to hold open the intermediate filament lattice and to stabilize the nucleus against lateral compression. Molecular connections between integrins, cytoskeletal filaments, and nuclear scaffolds may therefore provide a discrete path for mechanical signal transfer through cells as well as a mechanism for producing integrated changes in cell and nuclear structure in response to changes in extracellular matrix adhesivity or mechanics.

NASA Discipline Cell Biology↗
DOE OSTI2022

Stable CsPbBr 3 Nanoclusters Feature a Disk-like Shape and a Distorted Orthorhombic Structure

CsPbBr 3 nanoclusters have been synthesized by several groups and mostly employed as single-source precursors for the synthesis of anisotropic perovskite nanostructures or perovskite-based heterostructures. Yet, a detailed characterization of such clusters is still lacking due to their high instability. In this work, we were able to stabilize CsPbBr 3 nanoclusters by carefully selecting ad hoc ligands (benzoic acid together with oleylamine) to passivate their surface. The clusters have a narrow absorption peak at 400 nm, a band-edge emission peaked at 410 nm at room temperature, and their composition is identified as CsPbBr 2.3 . Synchrotron X-ray pair distribution function measurements indicate that the clusters exhibit a disk-like shape with a thickness smaller than 2 nm and a diameter of 13 nm, and their crystal structure is a highly distorted orthorhombic CsPbBr 3 . Based on small- and wide-angle X-ray scattering analyses, the clusters tend to form a two-dimensional (2D) hexagonal packing with a short-range order and a lamellar packing with a long-range order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Stresses, strains, and surface pressures in the lung caused by its weight.

In an effort to understand how the lung is deformed by its own weight, we have analyzed the distribution of regional expansion, stresses, and surface pressures in a theoretical elastic lung-shaped model using the technique of finite elements. In the upright position, the parenchyma was most expanded at the apex and least at the base. Stresses in both the vertical and lateral directions were maximal at the apex. As the lung was inflated from very low volumes to total lung capacity, parenchymal expansion and stress at the apex first decreased, then increased. This behavior can be explained by the increasing rigidity of the expanded lung which enabled it to resist distortion by its own weight. At functional residual capacity, the stress at the apex was near its minimum. The differences in intrapleural pressure down the lung were volume dependent, increasing at very low volumes. In the inverted lung, the regional differences in stress, strain, and surface pressures were less marked because of the shape of the chest.

West, J. B.↗
DOE OSTI2021

Quasi-particle interference of the van Hove singularity in Sr2RuO4

Abstract The single-layered ruthenate Sr 2 RuO 4 is one of the most enigmatic unconventional superconductors. While for many years it was thought to be the best candidate for a chiral p -wave superconducting ground state, desirable for topological quantum computations, recent experiments suggest a singlet state, ruling out the original p -wave scenario. The superconductivity as well as the properties of the multi-layered compounds of the ruthenate perovskites are strongly influenced by a van Hove singularity in proximity of the Fermi energy. Tiny structural distortions move the van Hove singularity across the Fermi energy with dramatic consequences for the physical properties. Here, we determine the electronic structure of the van Hove singularity in the surface layer of Sr 2 RuO 4 by quasi-particle interference imaging. We trace its dispersion and demonstrate from a model calculation accounting for the full vacuum overlap of the wave functions that its detection is facilitated through the octahedral rotations in the surface layer.

36 MATERIALS SCIENCE↗
DOE OSTI2023

New linear stability parameter to describe low-β electromagnetic microinstabilities driven by passing electrons in axisymmetric toroidal geometry

In magnetic confinement fusion devices, the ratio of the plasma pressure to the magnetic field energy, β, can become sufficiently large that electromagnetic microinstabilities become unstable, driving turbulence that distorts or reconnects the equilibrium magnetic field. In this paper, a theory is proposed for electromagnetic, electron-driven linear instabilities that have current layers localised to mode-rational surfaces and binormal wavelengths comparable to the ion gyroradius. The model retains axisymmetric toroidal geometry with arbitrary shaping, and consists of orbit-averaged equations for the mode-rational surface layer, with a ballooning space kinetic matching condition for passing electrons. The matching condition connects the current layer to the large scale electromagnetic fluctuations, and is derived in the limit that β is comparable to the square root of the electron-to-ion-mass ratio. Electromagnetic fluctuations only enter through the matching condition, allowing for the identification of an effective β that includes the effects of equilibrium flux surface shaping. The scaling predictions made by the asymptotic theory are tested with comparisons to results from linear simulations of micro-tearing and electrostatic microinstabilities in MAST discharge #6252, showing excellent agreement. In particular, it is demonstrated that the effective β can explain the dependence of the local micro-tearing mode (MTM) growth rate on the ballooning parameter θ 0 – possibly providing a route to optimise local flux surfaces for reduced MTM-driven transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1973

A reflection model for eclipsing binary stars

A highly accurate reflection model has been developed which emphasizes efficiency of computer calculation. It is assumed that the heating of the irradiated star must depend upon the following properties of the irradiating star: (1) effective temperature; (2) apparent area as seen from a point on the surface of the irradiated star; (3) limb darkening; and (4) zenith distance of the apparent centre as seen from a point on the surface of the irradiated star. The algorithm eliminates the need to integrate over the irradiating star while providing a highly accurate representation of the integrated bolometric flux, even for gravitationally distorted stars.

Wood, D. B.↗
NASA NTRS1977

Fundamental electronic mechanisms limiting the performance of solar cells

Attention is focused on distortion in the energy band, and carrier recombination and generation rates (lifetimes), as the two dominant mechanisms. Spatial dependences associated with these two mechanisms, in the direction normal to the surface illuminated by the sun and in the direction tangential to that surface, are also emphasized as crucial factors in governing the efficiency of solar cells. Electronic parameters for the set of differential equations characterizing transport, recombination, and generation of carriers, and interband and band-bound transition rates, are studied.

Lindholm, F. A.↗
NASA NTRS1979

Deployable antenna reflector

The first phase in the development of a solid surface, deployable, antenna reflector is outlined and discussed. The deployment concept is described in conjunction with illustrations and photos of the fabricated reflector models. Details and results of the thermal distortion analysis are presented. Results indicate that the discussed reflector concept is an effective approach in satisfying the requirements for large deployable antennas in the 6 GHz to 100 GHz frequency regime.

Palmer, W. B.↗
NASA NTRS1980

A study of radio frequency interference with the Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR)

One of the important objectives of the NIMBUS-7 Scanning Multichannel Microwave Radiometer (SMMR) is to demonstrate the feasibility of all weather measurements of various ocean parameters; such as sea surface temperature (SST) and near surface wind speed (WS). These ocean parameters can be determined from multispectral measurements of ocean brightness temperatures in the microwave region of the electromagnetic spectrum. These microwave measurements, however, are distorted if the field of view of the SMMR antenna encounters radio transmissions from terrestrial sources. Sources of terrestrial Radio Frequency Interference (RFI) in the SMMR ocean data were identified. Its extent and characteristics over different ocean areas on the Earth were determined.

Kogut, J. A.↗
NASA NTRS1984

Gravitational radiation from accreting neutron stars

Attention is given to the evolution of neutron stars whose magnetic fields are so weak that (1) the effects of the magnetosphere on the accretion disk are negligible, allowing it to extend to the surface of the star; and (2) the loss of energy and angular momentum by the pulsar mechanism is negligible compared with that provided by the accretion disk. The small nonaxisymmetric distortion of the neutron star should produce some modulation of the X-ray emission at the gravitational wave frequency, and it is hypothesized that this frequency will lie in the 200-800 Hz range. This is significantly below the rotational frequency of the neutron star.

Wagoner, R. V.↗
NASA NTRS1986

A technique for the optical analysis of deformed telescope mirrors

The NASTRAN-ACCOS V programs' interface merges structural and optical analysis capabilities in order to characterize the performance of the NASA Goddard Space Flight Center's Solar Optical Telescope primary mirror, which has a large diameter/thickness ratio. The first step in the optical analysis is to use NASTRAN's FEM to model the primary mirror, simulating any distortions due to gravitation, thermal gradients, and coefficient of thermal expansion nonuniformities. NASTRAN outputs are then converted into an ACCOS V-acceptable form; ACCOS V generates the deformed optical surface on the basis of these inputs, and imaging qualities can be determined.

Bolton, John F.↗
NASA NTRS1988

On the relation between photospheric flow fields and the magnetic field distribution on the solar surface

Using the technique of local correlation tracking on a 28 minute time sequence of white-light images of solar granulation, the horizontal flow field on the solar surface is measured. The time series was obtained by the Solar Optical Universal Polarimeter (SOUP) on Spacelab 2 (Space Shuttle flight 51-F) and is free from atmospheric blurring and distortion. The SOUP flow fields have been compared with carefully aligned magnetograms taken over a nine hour period at the Big Bear Solar Observatory before, during, and after the SOUP images. The flow field and the magnetic field agree in considerable detail: vectors which define the flow of the white-light intensity pattern (granulation) point toward magnetic field regions, magnetic fields surround flow cells, and magnetic features move along the flow arrows. The projected locations of free particles ('corks') in the measured flow field congregate at the same locations where the magnetic field is observed.

Simon, George W.↗
NASA NTRS1994

Unsteady aerodynamics of vortical flows: Early and recent developments

The development of aerodynamic theories of streaming motions around bodies with unsteady vortical and entropic disturbances is reviewed. The basic concepts associated with such motions, their interaction with solid boundaries and their noise generating mechanisms are described. The theory was first developed in the approximation wherein the unsteady flow is linearized about a uniform mean lfow. This approach has been extensively developed and used in aeroelastic and aeroacoustic calculations. The theory was recently extended to account for the effect of distortion of the incident disturbances by the nonuniform mean flow around the body. This effect is found to have a significant influence on the unsteady aerodynamic force along the body surface and the sound radiated in the far field. Finally, the nonlinear characteristics of unsteady transonic flows are reviewed and recent results of linear and nonlinear computations are presented.

Atassi, H. M.↗
NASA NTRS1998

On the Environmental Realizability of Algebraically Growing Disturbances and Their Relation to Klebanoff Modes

A theoretical explanation of some experimentally observed phenomena associated with the so-called Klebanoff modes is obtained by analyzing the flow over a finite thickness flat plate resulting from a small-amplitude distortion imposed on the upstream mean flow. The analysis shows (among other things) how the stretching of the vortex lines around the plate leads to streamwise vorticity at the plate surface, which then produces a streamwise velocity perturbation within the boundary layer that can be related to the experimentally observed Klebanoff mode. The complete evolution of this flow must be found by solving the boundary-region equations of Kemp (1951) and Davis and Rubin (1980), but a limiting analytical solution can also be obtained. Since the initial growth of the boundary-layer disturbance is nearly algebraic, our results demonstrate how the algebraically growing disturbances promoted by Landahl and others can be generated by a realistic external-disturbance environment. The relationship between these results and various bypass transition mechanisms is discussed.

Goldstein, Marvin E.↗
NASA NTRS1998

On the Environmental Realizability of Algebraically Growing Disturbances and Their Relation to Klebanoff Modes

A theoretical explanation of some experimentally observed phenomena associated with the so-called Klebanoff modes is obtained by analyzing the flow over a finite thickness flat plate resulting from a small-amplitude distortion imposed on the upstream mean flow. The analysis shows (among other things) how the stretching of the vortex lines around the plate leads to streamwise vorticity at the plate surface, which then produces a streamwise velocity perturbation within the boundary layer that can be related to the experimentally observed Klebanoff mode. The complete evolution of this flow must be found by solving the boundary-region equations of Kemp (1951) and Davis and Rubin (1980), but a limiting analytical solution can also be obtained. Since the initial growth of the boundary-layer disturbance is nearly algebraic, our results demonstrate how the algebraically growing disturbances promoted by Landahl and others can be generated by a realistic external-disturbance environment. The relationship between these results and various bypass transition mechanisms is discussed.

Goldstein, M. E.↗
NASA NTRS2004

Category 3: Sound Generation by Interacting With a Gust

Solve the time-dependent inviscid flow equations for this geometry subject to the specified inflow/outflow mean conditions and the fluctuating inflow velocity distortion. (1) Compute the unsteady solution until periodicity in pressure is achieved by showing that at least two successive periods are identical. Periodicity must be achieved on both the airfoil surface and the inflow/outflow boundaries. (2) Once periodicity is achieved, compute the pressure frequency spectra on the reference airfoil on both the upper and lower surfaces at x=(-0.25c,0.00, +0.25c), on the inflow boundary at (x,y)={1.5c,-0.3c), (-1.5c,0.0),(-1.5c,0.3c)} and on the outflow boundary at (x,y)= {(1.5c,-0.3c),(1.5c,0.0), (1.5c,0.3c)}. Express the spectral results in dB using the standard definition 20 log(P(sub(r.m.s)/P(sub ref), where p(sub ref) == 20 microPa. (3) Extract the harmonic pressure distributions on the inflow and outflow boundaries (i.e., on x= -/+ 1.5c lines) at the fundamental frequency omega and apply a Fourier transform in y direction to identify the spatial (i.e., mode order) structure of the pressure perturbations. Express the result in dB for each mode order. Repeat the process for the frequencies 2omega and 3omega.

Envia, Edmane↗