Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STEELS, STAINLESS - WELDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Characterisation of Ceramic-Coated 316LN Stainless Steel Exposed to High-Temperature Thermite Melt and Molten Sodium

Currently, stainless steel grade 316LN is the material of construction widely used for core catcher of sodium-cooled fast reactors. Design philosophy for core catcher demands its capability to withstand corium loading from whole core melt accidents. Towards this, two ceramic coatings were investigated for its application as a layer of sacrificial material on the top of core catcher to enhance its capability. Plasma-sprayed thermal barrier layer of alumina and partially stabilised zirconia (PSZ) with an intermediate bond coat of NiCrAlY are selected as candidate material and deposited over 316LN SS substrates and were tested for their suitability as thermal barrier layer for core catcher. Coated specimens were exposed to high-temperature thermite melt to simulate impingement of molten corium. Sodium compatibility of alumina and PSZ coatings were also investigated by exposing samples to molten sodium at 400 °C for 500 h. The surface morphology of high-temperature thermite melt-exposed samples and sodium-exposed samples was examined using scanning electron microscope. Phase identification of the exposed samples was carried out by x-ray diffraction technique. Observation from sodium exposure tests indicated that alumina coating offers better protection compared to PSZ coating. However, PSZ coating provided better protection against high-temperature melt exposure, as confirmed during thermite melt exposure test.

36 MATERIALS SCIENCE↗

Influence of carbon nanotubes on microstructure and corrosion performance of additively manufactured 316L stainless steel

For this study, laser powder bed fusion (LPBF) was performed on feedstock-modified 316L stainless steel powder with 1 and 2 vol% carbon nanotubes (CNT). The corrosion resistance was evaluated following cyclic potentiodynamic polarization tests conducted in 0.6 M NaCl at room temperature, 35 and 50 °C, and immersion tests in 6 % FeCl 3 . The CNT addition has increased the pitting potential and decreased number of pits formed during immersion in FeCl 3 solution, which could be attributed to Mn-Si-O nano inclusions refinement and segregation of chromium around the inclusions. The observed corrosion behavior was correlated with the altered microstructure due to CNT addition.

36 MATERIALS SCIENCE↗

Formation of Nanosized Surface Layers of 03Kh17N12M2 Stainless Steel by Implantation of N{sup +} Ions

Accumulation of nitrogen in nanosized surface layers of 03Kh17N12M2 stainless steel has been detected upon N{sup +} ion implantation up to 14 at % together with metal nitrides, mainly of chromium nitride CrN and interstitial solid solution. It has been demonstrated that N{sup +} ion implantation accompanied by preliminary irradiation by Ar{sup +} and O{sup +} ions decreases maximum nitrogen concentration by at least two times. It is assumed that this is stipulated by segregation to surface layers of iron atoms upon irradiation by Ar{sup +} ions as well as formation of chromium oxide Cr{sub 2}O{sub 3} and chromium hydroxide CrOOH upon irradiation by O{sup +} ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructure and XRD analysis of brazing joint for duplex stainless steel using a Ni-Si-B filler metal

Brazing of a nitrogen-containing duplex stainless steel was preformed using a nickel-based filler metal (Ni-4.5wt.%, Si-3.2wt.%, B). The microstructure of the brazed joint was investigated using scanning electron microscopy, energy dispersive spectrometry, electron probe microanalyzer, and layer-by-layer X-ray diffraction analysis. The results indicated that before completion of isothermal solidification, BN, Ni{sub 3}B and Ni{sub 3}Si precipitates formed at the interface, in the athermally solidified zone and isothermally solidified zone, respectively. After isothermal solidification, only {gamma}-Ni phase appeared in the brazed interlayer. The appearance of hardness peak values in the athermally solidified zone and the interface most probably corresponded to the formation of Ni{sub 3}B and BN, respectively.

36 MATERIALS SCIENCE↗

Effect of alloying additions on phase equilibria and creep resistance of alumina-forming austenitic stainless steels

The high-temperature creep properties of a series of alumina-forming austenitic (AFA) stainless steels based on Fe-20Ni-(12-14)Cr-(2.5-4)Al-(0.2-3.3)Nb-0.1C (weight percent) were studied. Computational thermodynamics were used to aid in the interpretation of data on microstructural stability, phase equilibria, and creep resistance. Phases of MC (M: mainly Nb), M{sub 23}C{sub 6} (M: mainly Cr), B2 [{beta}-(Ni,Fe)Al], and Laves [Fe{sub 2}(Mo,Nb)] were observed after creep-rupture testing at 750 C and 170 MPa; this was generally consistent with the thermodynamic calculations. The creep resistance increased with increasing Nb additions up to 1 wt pct in the 2.5 and 3 Al wt pct alloy series, due to the stabilization of nanoscale MC particles relative to M{sub 23}C{sub 6}. Additions of Nb greater than 1 wt pct decreased creep resistance in the alloy series due to stabilization of the Laves phase and increased amounts of undissolved, coarse MC, which effectively reduced the precipitation of nanoscale MC particles. The additions of Al also increased the creep resistance moderately due to the increase in the volume fraction of B2 phase precipitates. Calculations suggested that optimum creep resistance would be achieved at approximately 1.5 wt pct Nb in the 4 wt pct Al alloy series.

36 MATERIALS SCIENCE↗

X-ray Diffraction Investigation of Annealing Behavior of Peened Surface Deformation Layer on Precipitation Hardening Stainless Steel

In order to investigate the recrystallization behavior of peened surface deformation layer of precipitation hardening stainless steel, a classic x-ray diffraction line profile analysis, Voigt method, was carried out on peened 17-4PH with different isothermal annealing temperatures. The activation energy of domain boundary migration (Q{sub a}) and the activation energy of microstrain relaxation (Q{sub b}) were calculated by regression analysis in different annealing temperature conditions. The results show that the value of Q{sub a} decreases with annealing temperature increasing, which is due to the influence of precipitation (ε-Cu) size on the movements of grain and subgrain boundaries. The maximum growth rate of ε-Cu particles occurs during 400 to 500 °C interval. Compared with growth behavior of domain size, microstrain relaxation behavior is less sensitive to precipitation particle size. The effects of annealing temperature and time on dislocation density are both significant when annealing temperature is lower than 500 °C. However, the effect of annealing temperature on dislocation density becomes insignificant when annealing temperature is higher than 500 °C. 300 °C annealing temperature only leads to the microstrain relaxation but nearly cannot lead to the domain size growth even if prolonging annealing time. Microstructure enhancement effect still exists in plastic deformation layer when 300 °C annealing temperature lasts for 60 min but nearly disappears when 600 °C annealing temperature lasts for 20 min.

36 MATERIALS SCIENCE↗

Evolution of cellular dislocation structures and defects in additively manufactured austenitic stainless steel under ion irradiation

Here, the evolution of irradiation-induced defects in additively manufactured (AM) austenitic stainless steel was explored in situ by 1 MeV Kr ion irradiation at 450 and 600 °C in a transmission electron microscope. Cellular dislocation structure in AM steel act as sink/trap sites for the irradiation-induced defects, resulting in the lower density and smaller dislocation loops in AM steel than conventional forged (CF) steel at 450 °C. The higher stacking fault energy and local stress concentration induced by cellular dislocation structure in AM steel promotes the unfaulting process and the formation of network dislocation at 600 °C.

36 MATERIALS SCIENCE↗

Swelling resistance of advanced austenitic alloy A709 and its comparison with 316 stainless steel at high damage levels

Alloy A709 is an austenitic alloy developed for power boiler applications in thermal power plants and is being considered as a candidate structural material for Generation IV reactors and fusion reactors, based especially on its increased creep strength over Type 316 stainless steel. However, improved thermal creep properties would not necessarily imply improved radiation resistance, especially with respect to void swelling. Since there are currently no neutron irradiation data on A709 to high fluences, A709 and cold-worked 316 were irradiated in the present study under identical conditions to doses between 100 and 400 peak dpa using irradiation by 3.5 MeV Fe +2 ions. The swelling behavior of 316 is well-known for both neutron and ion irradiation, thus the relative swelling behavior of A709 and 316 under ion irradiation might provide an indication of the swelling behavior of A709 in neutron irradiation environment. Swelling of A709 under ion irradiation was observed over the range of 500-600 ⁰C, peaking at 575 ⁰C. Both A709 and 316 eventually swelled at a rate of ~1 %/dpa under ion irradiation at 575 ⁰C, consistent with the swelling of 316 observed during neutron irradiation. But A709 had a significantly longer transient regime than 316 at any given dpa rate, demonstrating enhanced swelling resistance of A709 over 316 under self-ion irradiation. The swelling levels reached at 400 peak dpa were 55% and 90% for A709 and 316, respectively. The assigned local dpa levels were adjusted both temporally and spatially at each dose for swelling-induced increases in the ion range and concomitant decreases in density. The duration of the transient regimes in each alloy was also observed to increase as the local dpa rate increased, an observation also consistent with neutron irradiation behavior of 316 stainless steel.

36 MATERIALS SCIENCE↗

Oxidation Characteristics of Fe–18Cr–18Mn-Stainless Steel Alloys

Air oxidation studies of Fe-18Cr-18Mn stainless steels were conducted at 525°C, 625°C, and 725°C. Alloys were evaluated with respect to changes in oxidation properties as a result of interstitial additions of nitrogen and carbon and of minor solute additions of silicon, molybdenum, and nickel. Interstitial concentrations possibly had a small, positive effect on oxidation resistance. Minor solute additions significantly improved oxidation resistance but could also reduce interstitial solubility resulting in formation of chromium carbides. Loss of solute chromium resulted in a slight reduction in oxidation protection. Oxidation lasting over 500 hours produced a manganese rich, duplex oxide structure: an outer sesquioxide and an inner spinel oxide.

36 MATERIALS SCIENCE↗

Effect of thermal aging on corrosion behavior of duplex stainless steels

Abstract Despite their exceptional mechanical and corrosion properties, duplex stainless steels (DSS) have not found widespread use in high-temperature applications due to concerns over thermal aging and embrittlement at elevated operational temperatures (> 300 °C). The present study investigated the effect of thermal aging time on the electrochemical properties of lean and standard grade DSS that are exposed to a range of pressurized water reactors containing LiOH and H 3 BO 3 . The results indicated that the electrolyte chemistry plays a significant role in the corrosion behavior of the DSS alloys. Corrosion resistance decreased with thermal aging time for all DSS alloys; however, standard grade DSS (2205 and 2209-w) alloys showed better corrosion resistance than lean grades (2003, 2101, 2101-w). The presence of dissolved oxygen in the electrolytes resulted in a significant increase in corrosion rate for the DSS alloys, but it did not affect the general trend of corrosion rates with aging time. All DSS alloys became vulnerable to pitting corrosion due to chloride addition, but the pitting resistance decreased with increasing thermal aging time. Increased boron B content resulted in degradation of corrosion resistance of the DSS alloys, while minor changes in pH did not show a significant change in corrosion resistance. Mechanical and metallurgical characterization coupled with electrochemical characterization of the DSS alloys gave a comprehensive insight into the effects of thermal aging on the electrochemical response of the DSS. Graphical abstract

Murkute, Pratik (ORCID:0000000278636346)↗