Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILVER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Influence of annealing on the optical properties of vacuum deposited silver thin films

Thin Silver films of thickness 15nm were prepared by thermal evaporation on well cleaned glass substrates at room temperature at a pressure of 2×10{sup −5} mbar with the deposition rate of 0.01À/sec and annealed in air for an hour at temperatures between 300°c and 400°c. The prepared films were characterized by X-ray diffraction (XRD), UV-visible spectroscopy and AFM. The mean grain size of the film at different annealing temperatures was determined by the X-ray diffraction pattern by using Scheer’s formula. It is found that from absorbance studies surface Plasmon peak position decreases as the annealing temperature increases and blue shifted. And also from transmittance studies the thermal effect of silver film strongly affects the optical transmittance. From AFM studies the average particle size and RMS surface roughness increase with increase of annealing temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silver-containing polymer composition used in spacecraft and semiconductor optoelectronics control systems

The copolymer of the vinyl chloride-maleic anhydride and silver nano- and microparticle (70 wt %) composition is offered as a conductive adhesive for fixing various chips on the dielectric substrate. The wiring volume resistivity is up to 3.1×10{sup −8} Ohm×m. The adhesive strength of the silver-containing polymer composition (70% of Ag) applied under a shear on the dielectric substrate is 106 N/mm{sup 2}. Adhesive layers obtained from these substances have a high thermal conductivity up to λ = 199.93 W/m×K that depends on the amount of Ag in the polymer composition.

36 MATERIALS SCIENCE↗

Effect of silver additive on physicochemical properties of hydroxyapatite applied to reconstructive surgery

The effect of silver adding to hydroxyapatite (HA) in its solubility in physiological solution and biological activity was investigated. Samples of HA containing silver (AgHA) obtained by liquid-phase method in the conditions of microwave exposure. Solubility (C{sub Ca}{sup 2+}·10{sup 3}, mol/l) of the powders AgHA was determined by chemical methods according trilonometric titration of the calcium ions in physiological solution at 25 and 37 °C. To investigate the biological activity of the samples, a series of experiments on the formation of the calcium-phosphate layer on the surface of the SBF-solution at 37 °C for 28 days. Electronic micrographs of samples taken at the end of each 7 days of the experiment, indicate the formation of calcium-phosphate layer (CPL) in the samples, the kinetics of which is shown as a function of cumulative concentrations of calcium and magnesium ions from time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Darkfield microspectroscopy of nanostructures on silver tip-enhanced Raman scattering probes

We report an evaluation method employing darkfield microspectroscopy for silver probes used in tip-enhanced Raman scattering (TERS). By adjusting the darkfield illumination, the diffracted light from the probe outlines disappears and the diffracted light from the surface nanostructures and tips of the probes appears as colorful spots. Scanning electron microscopy reveals that the spectral variations in these spots reflect the shapes of the surface nanostructures. The tip curvatures correlate to the spectral maxima of their spots. Temporal color changes in the spots indicate the deterioration due to the oxidation of the silver surfaces. These results show that the proposed method is useful for in situ evaluation of plasmonic properties of TERS probes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of silver nanoparticles on the spectroscopic properties of Sm{sup 3+} doped boro-phosphate glasses

The Sm{sup 3+} doped novel boro-phosphate glasses containing silver nanoparticles (NPs) (SmBPxA) have been prepared following the melt quenching technique and their structural and spectroscopic behavior were studied through HR-TEM, optical absorption and photoluminescence spectral measurements. The TEM analysis validates the existence of Ag NPs with an average diameter of ~8 nm. The Surface plasmon resonance (SPR) band of silver NPs was found at around 600 nm from the absorption spectrum of the Sm{sup 3+} ions free glass sample. The optical band gap energy (E{sub opt}) corresponding to the direct and indirect allowed transitions and the Urbach energy (ΔE) values were determined from the absorption spectral measurements. The luminescence intensity is found to get enhance when the Ag NPs were embedded along with the Sm{sup 3+} ions in the prepared glasses due to the local electric field effect around the rare earth (RE) ion site produced by the SPR of Ag NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tailored silver grid as transparent electrodes directly written by femtosecond laser

We present the design and realization of silver grid transparent electrodes (SGTEs) easily fabricated by femtosecond laser direct writing of silver aqueous solution. The fabricated SGTEs with a sheet resistance down to 47 Ω/□ and optical transmittance up to 93% are demonstrated. These sheet resistance and transmittance values are comparable to commercially available indium tin oxide. High uniform morphology of the directly written SGTEs results in the ultra-stable tailored performance parameter at electronic and optical fields. The sheet resistance and transmittance can be tailored precisely by manipulating the filling fraction of the uniform SGTEs. This study provides an approach for creating SGTEs in a controllable fashion, and the SGTEs exhibit high transmittance and low sheet resistance, which could open up new avenues towards widespread application in electronics, photovoltaics, and optoelectronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Specific features of single-pulse femtosecond laser micron and submicron ablation of a thin silver film coated with a micron-thick photoresist layer

Specific features of ablation of a thin silver film with a 1-μm-thick layer of a highly transparent photoresist and the same film without a photoresist layer under single tightly focused femtosecond laser pulses in the visible range (515 nm) are experimentally investigated. Interference effects of internal modification of the photoresist layer, its spallation ablation from the film surface and formation of through hollow submicron channels in the resist without its spallation but with ablation of the silver film lying under the resist are found and discussed. (extreme light fields and their applications)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Creating metamaterial building blocks with directed photochemical metallization of silver onto DNA origami templates

Here, DNA origami can be used to create a variety of complex and geometrically unique nanostructures that can be further modified to produce building blocks for applications such as in optical metamaterials. We describe a method for creating metal-coated nanostructures using DNA origami templates and a photochemical metallization technique. Triangular DNA origami forms were fabricated and coated with a thin metal layer by photochemical silver reduction while in solution or supported on a surface. The DNA origami template serves as a localized photosensitizer to facilitate reduction of silver ions directly from solution onto the DNA surface. The metallizing process is shown to result in a conformal metal coating, which grows in height to a self-limiting value with increasing photoreduction steps. Although this coating process results in a slight decrease in the triangle dimensions, the overall template shape is retained. Notably, this coating method exhibits characteristics of self-limiting and defect-filling growth, which results in a metal nanostructure that maps the shape of the original DNA template with a continuous and uniform metal layer and stops growing once all available DNA sites are exhausted.

59 BASIC BIOLOGICAL SCIENCES↗

Coherent random lasers in weakly scattering polymer films containing silver nanoparticles

We report on the observations of coherent random lasers in weakly scattering polymer films embedded with silver nanoparticles. The dominant oscillation cavity calculated from the ensemble-averaged power Fourier transform spectrum of single-shot emission spectra is shorter by more than two orders of magnitude than the scattering mean-free path, indicating that the oscillation cavity is loosely associated with multiple scattering. We suggest that the coherent feedback arises from the cooperative effect of light scattering and field enhancement in the vicinity of silver nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optimal control of the strong-field ionization of silver clusters in helium droplets

Optimal control techniques combined with femtosecond laser pulse shaping are applied to steer and enhance the strong-field induced emission of highly charged atomic ions from silver clusters embedded in helium nanodroplets. With light fields shaped in amplitude and phase we observe a substantial increase of the Ag{sup q+} yield for q>10 when compared to bandwidth-limited and optimally stretched pulses. A remarkably simple double-pulse structure, containing a low-intensity prepulse and a stronger main pulse, turns out to produce the highest atomic charge states up to Ag{sup 20+}. A negative chirp during the main pulse hints at dynamic frequency locking to the cluster plasmon. A numerical optimal control study on pure silver clusters with a nanoplasma model converges to a similar pulse structure and corroborates that the optimal light field adapts to the resonant excitation of cluster surface plasmons for efficient ionization.

74 ATOMIC AND MOLECULAR PHYSICS↗

High-order harmonic generation in a plasma plume of in situ laser-produced silver nanoparticles

The results of the experimental study of high-order harmonic generation (HHG) from the interaction of 45-fs Ti:sapphire laser pulses with plasma plumes of Ag nanoparticles produced in situ are presented in this article. The nanoparticles were generated by the interaction of 300-ps, 20-mJ laser pulses with bulk silver targets at an intensity of {approx}1x10{sup 13} W/cm{sup 2}. The spectral characteristics of the HHG from nanoparticles produced in situ are compared with the HHG from monoparticle plasma plumes and with the HHG from preformed nanoparticle-containing plasma plumes. The cutoff harmonic order generated using the in situ silver nanoparticles is at the 21st harmonic order.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Annihilation of craters: Molecular dynamic simulations on a silver surface

The ability of silver cluster ions containing 13 atoms to fill in a preexisting crater with a radius of about 28 A ring on a silver (001) target has been investigated using molecular dynamics simulations and the molecular-dynamics-Monte Carlo corrected effective medium potential. The largest lateral distance r between crater and ion was about three times the radius of the preexisting crater, namely, 75 A ring . The results reveal that when r<20 A ring and r>60 A ring the preexisting crater is partially filled in, and for other distances there is a net growth of the crater. The lattice damage created by the cluster ions, the total sputtering yield, the cluster sputtering yield, and simulated transmission electron microscopy images of the irradiated targets are also presented.

36 MATERIALS SCIENCE↗

Packaging of an 8-kV Silicon Carbide Diode Module with Double-Side Cooling and Sintered-Silver Joints

Packaging innovations are needed for medium-voltage wide bandgap power semiconductor modules to enable their adaptation in grid applications. A unique challenge for packaging medium-voltage power modules is managing the trade-off between insulation demand and heat dissipation. The focus of this work was on developing a packaging innovation that improves the module heat dissipation and offers more flexibility to its insulation design. Two strategies were explored for the packaging of an 8-kV SiC diode rectifier module:(1) double-side cooling and (2) sintered-silver bonding. Double-side cooling was realized by using short metal posts rather than long and thin wire bonds for device interconnection, forming a low-profile package with devices sandwiched between two insulated metal substrates. Sintered-silver bonding enabled the devices to function reliably at over 250 °C. Simulations of the packaged module showed a low interconnect inductance of 2.67 nH and a 50% less heat transfer coefficient required to cool the chips. Prototypes of the module were fabricated, and preliminary electrical testing results validated the package design.

27 ARPA - Advanced Research Projects Agency-Energy↗

Reliability Analysis of Large-Area, Low Pressure-Assisted Silver Sintering for Medium-Voltage Power Modules

Multi-layer insulating ceramic substrates can enable medium-voltage (MV) power modules with reduced peak electric field. This benefit is particularly important for MV silicon carbide (SiC) MOSFETs due to their higher operating voltages. Large-area, low-pressure assisted silver sintering is a potential solution for bonding substrates to create a multi-layer structure. The voiding content and defect density of the bond used to create the multi-layer substrate stack-up is critical to the reliability of the power module and the thermal performance, as this bond is in the primary path for heat dissipation in the power module structure. Here, samples of two-layer direct bonded aluminum (DBA) stacks have been fabricated and subjected to thermal cycling to analyze their reliability. Passive thermal cycling from -40 degrees C to 200 degrees C was performed. Cross-sections were cut at pre-determined intervals and imaged with Scanning Electron Microscopy (SEM). After 1000 thermal cycles, adhesive failures are observed between the sintered silver and the DBA surface. Cross-sections were cut and imaged via optical microscope and SEM. Thermal analyzer measurements are recorded on a 10-kV SiC power module utilizing the sintered DBA substrate stacks.

30 DIRECT ENERGY CONVERSION↗

Contact Drying of Printed Sinterable-Silver Paste

We report that drying of stencil-, screen-, or dispense-printed paste is a crucial, yet taken-for-granted, presintering step for sinterable-silver (SS) interconnect processing and ultimately its reliability. If the paste’s solvent is not sufficiently removed during drying, then entrapped gas can result, and that leads to the formation of thermal-, strength-, and reliability-limiting defects in the later-sintered interconnect layer. Presently advocated drying strategies for wet silver paste cause either a limit of associated size or area or require pressure assistance during subsequent sintering. Alternatively, open-face contact drying (OContDry) from contact heating or conductive heating (a method used in industrial processes) offers the potential to overcome those limitations with SS paste. However, satisfactory strength of its final sintered structure must be proven prior to any potential adoption. In this paper, the achievement of a combination of relatively large shear failure stress with low scatter for OContDry SS was demonstrated. Lastly, this is significant because OContDry enables greater processing versatility with SS interconnects and several other advantages too.

36 MATERIALS SCIENCE↗

Negative real parts of the equivalent permittivity, permeability, and refractive index of sculptured-nanorod arrays of silver

Thin films comprising parallel nanorods were deposited by directing silver vapor obliquely toward a plane substrate. The direction of the vapor flux was varied in two different ways to sculpture the nanorods in different shapes. The reflection and transmission coefficients of the thin films were measured at three wavelengths in the visible regime for normal-illumination conditions for two linear-polarization states, using walk-off interferometry and polarization interferometry. The authors found that sculpturing significantly affects the signs of the real parts of the equivalent permittivity, permeability, and refractive index of the silver thin films for the two polarization states at different wavelengths. Thus, vapor deposition combined with sculpturing can be useful for large-scale production of materials having different equivalent constitutive parameters with negative real parts.

36 MATERIALS SCIENCE↗

Concentration of energy inside laser-irradiated gold and silver plasmon nanoparticles in air

We simulated laser-intensity distribution inside spherical gold and silver nanoparticles with radii between 10 and 100 nm, which are exposed to laser radiation at 400, 532, and 800 nm in air, and analyzed the results. The effect of high energy concentration inside illuminated (front) and shadowed (back) hemispheres of gold and silver nanoparticles is established for several nanoparticle sizes and laser wavelengths. The results can be used in nanophotonics of new plasmon devices (concentrators, antennas, etc.) and photon components.

77 NANOSCIENCE AND NANOTECHNOLOGY↗