Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SATELLITE CONFIGURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

COMPASS Final Report: Lunar Communications Terminal (LCT)

The Lunar Communications Terminal (LCT) COllaborative Modeling and Parametric Assessment of Space Systems (COMPASS) session designed a terminal to provide communications between lunar South Pole assets, communications relay to/from these assets through an orbiting Lunar Relay Satellite (LRS) and navigation support. The design included a complete master equipment list, power requirement list, configuration design, and brief risk assessment and cost analysis. The Terminal consists of a pallet containing the communications and avionics equipment, surrounded by the thermal control system (radiator), an attached, deployable 10-m tower, upon which were mounted locally broadcasting and receiving modems and a deployable 1 m diameter Ka/S band dish which provides relay communications with the lunar relay satellites and, as a backup, Earth when it is in view. All power was assumed to come from the lunar outpost Habitat. Three LCT design options were explored: a stand-alone LCT servicing the manned outpost, an integrated LCT (into the Habitat or Lunar Lander), and a mini-LCT which provides a reduced level of communication for primarily robotic areas dealing as in situ resource utilization (ISRU) and remote science. Where possible all the designs assumed single fault tolerance. Significant mass savings were found when integrating the LCT into the Habitat or Lander but increases in costs occurred depending upon the level of man rating required for such designs.

Oleson, Steven R.↗

Advanced Communications Technology Satellite (ACTS) Fade Compensation Protocol Impact on Very Small-Aperture Terminal Bit Error Rate Performance

The Advanced Communications Technology Satellite (ACTS) communications system operates at Ka band. ACTS uses an adaptive rain fade compensation protocol to reduce the impact of signal attenuation resulting from propagation effects. The purpose of this paper is to present the results of an analysis characterizing the improvement in VSAT performance provided by this protocol. The metric for performance is VSAT bit error rate (BER) availability. The acceptable availability defined by communication system design specifications is 99.5% for a BER of 5E-7 or better. VSAT BER availabilities with and without rain fade compensation are presented. A comparison shows the improvement in BER availability realized with rain fade compensation. Results are presented for an eight-month period and for 24 months spread over a three-year period. The two time periods represent two different configurations of the fade compensation protocol. Index Terms-Adaptive coding, attenuation, propagation, rain, satellite communication, satellites.

Cox, Christina B.↗

Space Telescope - A versatile new instrument

The design, in-orbit operation and projected performance of the Space Telescope are discussed. The telescope will be in a moderately low earth orbit and communicate with the earth through the Tracking and Data Relay Satellite and directly for a few minutes each orbit. The optical system contains a 2.4-m mirror in a standard Cassegrain configuration, with four axial instrument positions and one radial and a fine guidance sensor which will allow the maintenance of telescope pointing during an observation to seven thousandths of an arcsec. The satellite will be launched by the Space Shuttle, and is capable of being serviced in space or recaptured and brought back to earth for more extensive modifications. The telescope employs a fairly standard Ritchey-Chretian optical design with a primary field of view of 18 arcmin and good mirror reflection of wavelengths from 1100 A to 1 mm. Image quality will be very insensitive to wavelength, with image size on the order of 0.04 arcsec. Instruments to be carried on the first launch include a guidance system for astrometry, a wide-field and planetary camera, a faint object camera, a high resolution spectrograph, a faint object spectrograph and a high-speed photometer.

Roman, N.↗

ATS-6 - Satellite-to-satellite tracking and data relay experiments

The paper describes the utilization of ATS-6 to relay tracking and telemetry data from Geos-5 and then from Nimbus-6. The experiment configuration consists of a ground station which receives data from ATS-6 through C-band links; ATS-6, in turn, transmits command data and receives telemetry data from the low-orbit satellites through S-band links. The ground and satellite equipment are described along with results of ground tests.

Schmid, P. E.↗

Preliminary Routing for a National Laboratory Lab-Wide Commuting Program

There is a growing interest in reducing the amount of vehicle miles traveled (VMT), both in public and private sector organizations, in an effort to reduce overall carbon emissions. The Oak Ridge National Laboratory (ORNL), located in Oak Ridge, Tennessee, and located within close proximity to Knoxville, Tennessee, has more than 4,500 employees, most of which live in and around Knoxville. ORNL is currently developing a pilot commuting program for all employees, which incorporates the use of park-and-ride facilities. This study outlines the methodology behind the preliminary geoanalysis and routing used in developing a lab-wide commuting program. Due to privacy concerns, the data used for the study included numbers of employee residences per zip code rather than actual residential addresses. Commuting configurations by clustered zip code area and vehicle type were developed based on number of residences in a limited area, and the desire to minimize VMT. Central locations were selected using ArcGIS software. Satellite imagery was used to locate actual, suitable parking facilities to accommodate the specified number of residents involved in each commuting configuration. Optimized routing, and estimations of travel times, were performed using TransCAD GIS software. Energy estimates in kilowatt-hours (kwh) and gallons of gasoline, and gallons of gasoline equivalent, were all determined based on the scenarios. Standard petroleum-fueled vehicles were used in the initial estimates. Standard electric vehicles were also used in alternative scenarios to estimate potential additional energy and fuel savings. Furthermore the initial findings from this work will be used to develop a pilot program for ORNL.

99 GENERAL AND MISCELLANEOUS↗

NASA's Space Launch System: An Evolving Capability for Exploration

Designed to meet the stringent requirements of human exploration missions into deep space and to Mars, NASA's Space Launch System (SLS) vehicle represents a unique new launch capability opening new opportunities for mission design. While SLS's super-heavy launch vehicle predecessor, the Saturn V, was used for only two types of missions - launching Apollo spacecraft to the moon and lofting the Skylab space station into Earth orbit - NASA is working to identify new ways to use SLS to enable new missions or mission profiles. In its initial Block 1 configuration, capable of launching 70 metric tons (t) to low Earth orbit (LEO), SLS is capable of not only propelling the Orion crew vehicle into cislunar space, but also delivering small satellites to deep space destinations. With a 5-meter (m) fairing consistent with contemporary Evolved Expendable Launch Vehicles (EELVs), the Block 1 configuration can also deliver science payloads to high-characteristic-energy (C3) trajectories to the outer solar system. With the addition of an upper stage, the Block 1B configuration of SLS will be able to deliver 105 t to LEO and enable more ambitious human missions into the proving ground of space. This configuration offers opportunities for launching co-manifested payloads with the Orion crew vehicle, and a new class of secondary payloads, larger than today's cubesats. The evolved configurations of SLS, including both Block 1B and the 130 t Block 2, also offer the capability to carry 8.4- or 10-m payload fairings, larger than any contemporary launch vehicle. With unmatched mass-lift capability, payload volume, and C3, SLS not only enables spacecraft or mission designs currently impossible with contemporary EELVs, it also offers enhancing benefits, such as reduced risk and operational costs associated with shorter transit time to destination and reduced risk and complexity associated with launching large systems either monolithically or in fewer components. As this paper will demonstrate, SLS represents a unique new capability for spaceflight, and an opportunity to reinvent space by developing out-of-the-box missions and mission designs unlike any flown before.

Crumbly, Christopher M.↗

A numerical study of Saturn's F-ring

The short term effects of 'shepherding' satellites is examined in the general case where all bodies move along eccentric orbits by analyzing the motion of a ring of particles as their orbits evolve under the gravitational perturbations of the shepherds. This computational approach makes ring evolution calculations extremely efficient numerically, and provides added insight into the nature of this two-body interaction. The procedure is analyzed and applied to several possible configurations of ring and shepherd orbits, emphasizing the F ring. If the F ring-to-satellite distance changes significantly due to eccentricities, the ring can break up into periodic clumps in an azimuthal domain which trails the satellite. This region may lag somewhat in longitude. The perturbations may cause the ring to vary significantly in a width, and can impart a significant, but probably time-variable, eccentricity to the ring.

Showalter, M. R.↗

Search for muon neutrinos from Gamma-Ray Bursts with the IceCube neutrino telescope

We present the results of searches for high-energy muon neutrinos from 41 gamma- ray bursts (GRBs) in the northern sky with the IceCube detector in its 22-string con-figuration active in 2007/2008. The searches cover both the prompt and a possible precursor emission as well as a model-independent, wide time window of -1 h to +3 haround each GRB. In contrast to previous searches with a large GRB population, we do not utilize a standard Waxman?Bahcall GRB flux for the prompt emission but calcu- late individual neutrino spectra for all 41 GRBs from the burst parameters measured by satellites. For all three time windows the best estimate for the number of signal events is zero. Therefore, we place 90percent CL upper limits on the fluence from the prompt phase of 3.7 x 10-3 erg cm-2 (72TeV - 6.5 PeV) and on the fluence from the precursor phase of 2.3 x 10-3 erg cm-2 (2.2TeV - 55TeV), where the quoted energy ranges contain 90percent of the expected signal events in the detector. The 90percent CL upper limit for the wide time window is 2.7 x 10-3 erg cm-2 (3TeV - 2.8 PeV) assuming an E-2 flux.

79 ASTRONOMY AND ASTROPHYSICS↗

Bistatic LIDAR experiment proposed for the shuttle/tethered satellite system missions

A new experiment concept has been proposed for the shuttle/tethered satellite system missions, which can provide high resolution, global density mappings of certain ionospheric species. The technique utilizes bistatic LIDAR to take advantage of the unique dual platform configuration offered by these missions. A tuned, shuttle-based laser is used to excite a column of the atmosphere adjacent to the tethered satellite, while triangulating photometic detectors on the satellite are employed to measure the fluorescence from sections of the column. The fluorescent intensity at the detectors is increased about six decades over both ground-based and monostatic shuttle-based LIDAR sounding of the same region. In addition, the orbital motion of the Shuttle provides for quasi-global mapping unattainable with ground-based observations. Since this technique provides such vastly improved resolution on a synoptic scale, many important middle atmospheric studies, heretofore untenable, may soon be addressed.

Mccomas, D. J.↗

The trapped radiation belts of Jupiter

The preliminary results from the Trapped Radiation Detector instruments of the University of California at San Diego aboard Pioneers 10 and 11 for making measurements in the Jupiter magnetosphere are reviewed. Attention is given to the instrument and the flyby trajectories and results of the following investigations are presented: interplanetary electrons of Jovian origin, the configuration of the magnetosphere, interactions between the trapped radiation belts and Jupiter's satellites, (absorption of trapped radiation, the effect of angular dimensions, and the injection of energetic radiation), the behavior of electrons in the inner Jupiter magnetosphere, and multiple peaks near Pioneer 11 periapsis.

Fillius, W.↗

Galileo dual-spin attitude and articulation control system

Galileo, the first outer planet explorer to be configured as a dual spinner, will conduct intensive investigation of Jupiter's atmosphere, satellites, and magnetosphere. The exacting mission, coupled with the inherently complex spin and flexible body dynamics of the vehicle, demands careful design of the Galileo Attitude and Articulation Control System (AACS). A brief overview of the Galileo mission and spacecraft is presented, followed by a detailed discussion on the mechanization of the AACS and the many factors that influence its design. Included are discussions on attitude determination and control, high-gain antenna pointing, science scan platform pointing, nutation damping, wobble compensation, spin and despin control, and propellant migration and boom flexibility effects.

Ward, R. S.↗

Particle contamination from Martin Optical Black

The design of the barrel baffle of the Infrared Astronomical Satellite (IRAS) Optical Subsystem to minimize production of particulate contamination is described. The configuration of the 50-inch long, 28.5-inch diameter baffle required pop-rivet assembly after coating with Martin Optical Black for stray light suppression. An experiment to determine the contamination produced at assembly led to the modification of the baffle construction to preclude such damage to the coated surfaces.

Young, P. J.↗

Millimeter wavelength rectenna development

Rectennas were studied with the intent of converting the Earth's (black body) radiation into dc power for satellites in earth orbit. Power densities; metal-oxide-metal diodes; antenna design configurations; fluid patterns; substrate mounted antennas; and directions for future work are outlined. This presentation is represented by viewgraphs only.

Gallagher, James↗

The extended tracking network and indications of baseline precision and accuracy in the North Andes

The CASA Uno Global Positioning System (GPS) experiment (January-February 1988) included an extended tracking network which covered three continents in addition to the network of scientific interest in Central and South America. The repeatability of long baselines (400-1000 km) in South America is improved by up to a factor of two in the horizontal vector baseline components by using tracking stations in the Pacific and Europe to supplement stations in North America. In every case but one, the differences between the mean solutions obtained using different tracking networks was equal to or smaller than day-to-day rms repeatabilities for the same baselines. The mean solutions obtained by using tracking stations in North America and the Pacific agreed at the 2-3 millimeter level with those using tracking stations in North America and Europe. The agreement of the extended tracking network solutions suggests that a broad distribution of tracking stations provides better geometric constraints on the satellite orbits and that solutions are not sensitive to changes in tracking network configuration when an extended network is use. A comparison of the results from the North Andes and a baseline in North America suggests that the use of a geometrically strong extended tracking network is most important when the network of interest is far from North America.

Freymueller, Jeffrey T.↗

Laboratory measurements of on-board subsystems

Good progress was achieved on the test bed for on-board subsystems for future satellites. The test bed is for subsystems developed previously. Four test setups were configured in the INTELSAT technical labs: (1) TDMA on-board modem; (2) multicarrier demultiplexer demodulator; (3) IBS/IDR baseband processor; and (4) baseband switch matrix. The first three series of tests are completed and the tests on the BSM are in progress. Descriptions of test setups and major test results are included; the format of the presentation is outlined.

Nuspl, P. P.↗

Generic Divide and Conquer Internet-Based Computing

The rapid growth of internet-based applications and the proliferation of networking technologies have been transforming traditional commercial application areas as well as computer and computational sciences and engineering. This growth stimulates the exploration of new, internet-oriented software technologies that can open new research and application opportunities not only for the commercial world, but also for the scientific and high -performance computing applications community. The general goal of this research project is to contribute to better understanding of the transition to internet-based high -performance computing and to develop solutions for some of the difficulties of this transition. More specifically, our goal is to design an architecture for generic divide and conquer internet-based computing, to develop a portable implementation of this architecture, to create an example library of high-performance divide-and-conquer computing agents that run on top of this architecture, and to evaluate the performance of these agents. We have been designing an architecture that incorporates a master task-pool server and utilizes satellite computational servers that operate on the Internet in a dynamically changing large configuration of lower-end nodes provided by volunteer contributors. Our designed architecture is intended to be complementary to and accessible from computational grids such as Globus, Legion, and Condor. Grids provide remote access to existing high-end computing resources; in contrast, our goal is to utilize idle processor time of lower-end internet nodes. Our project is focused on a generic divide-and-conquer paradigm and its applications that operate on a loose and ever changing pool of lower-end internet nodes.

Radenski, Atanas↗

Galileo - The Serial-Production AIT Challenge

The Galileo Project is one of the most demanding projects of ESA, being Europe's autarkic navigation system and a constellation composed of 30 satellites. This presentation points out the different phases of the project up to the full operational capability and the corresponding launch options with respect to launch vehicles as well as launch configurations. One of the biggest challenges is to set up a small serial 'production line' for the overall integration and test campaign of satellites. This production line demands an optimization of all relevant tasks, taking into account also backup and recovery actions. A comprehensive AIT concept is required, reflecting a tightly merged facility layout and work flow design. In addition a common data management system is needed to handle all spacecraft related documentation and to have a direct input-out flow for all activities, phases and positions at the same time. Process optimization is a well known field of engineering in all small high tech production lines, nevertheless serial production of satellites are still not the daily task in space business and therefore new concepts have to be put in place. Therefore, and in order to meet the satellites overall system optimization, a thorough interface between unit/subsystem manufacturing and satellite AIT must be realized to ensure a smooth flow and to avoid any process interruption, which would directly lead to a schedule impact.

Ragnit, Ulrike↗

Theoretical modeling of the uranium 4f XPS for U(VI) and U(IV) oxides

A rigorous study is presented of the physical processes related to X-Ray photoelectron spectroscopy, XPS, in the 4f level of U oxides, which, as well as being of physical interest in themselves, are representative of XPS in heavy metal oxides. In particular, we present compelling evidence for a new view of the screening of core-holes that extends prior understandings. Our analysis of the screening focuses on the covalent mixing of high lying U and O orbitals as opposed to the, more common, use of orbitals that are nominally pure U or pure O. It is shown that this covalent mixing is quite different for the initial and final, core-hole, configurations and that this difference is directly related to the XPS satellite intensity. Furthermore, we show that the high-lying U d orbitals as well as the U(5f) orbital may both contribute to the core-hole screening, in contrast with previous work that has only considered screening through the U(5f) shell. The role of modifying the U-O interaction by changing the U-O distance has been investigated and an unexpected correlation between U-O distance and XPS satellite intensity has been discovered. The role of flourite and octahedral crystal structures for U(IV) oxides has been examined and relationships established between XPS features and the covalent interactions in the different structures. The physical views of XPS satellites as arising from shake processes or as arising from ligand to metal charge transfers are contrasted; our analysis provides strong support that shake processes give a more fundamental physical understanding than charge transfer. Our theoretical studies are based on rigorous, strictly ab initio determinations of the electronic structure of embedded cluster models of U oxides with formal U(VI) and U(IV) oxidation states. Our results provide a foundation that makes it possible to establish quantitative relationships between features of the XPS spectra and materials properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗