Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Recrystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

A Two-Stage Physical-Based Model for Predicting Flow Stress of As-cast TiAl Alloy Under Hot Deformation Conditions

The hot deformation behavior of Ti-30Al-4.2Mn-4.5Nb-0.2B alloy was investigated using the isothermal compression experiment at temperatures of 1020-1200 °C and strain rates of 0.001-1 s{sup −1}. The flow stress was sensitive to the deformation parameters like temperature and strain rate, which decreases with the increase in temperature and decrease in strain rates. Based on the true stress-true strain data, a two-stage physical-based model was proposed to describe the flow stress curve of as-cast TiAl alloy during hot deformation process. For establishing the model, at first, the flow curves of dynamic recovery (DRV) were modeled by employing stress-dislocation relation and adjusting dislocation annihilation coefficient Ω. Then, the flow curves of dynamic recrystallization (DRX) were modeled by considering the dynamic softening behavior into Avrami equation. Finally, the flow curves in the entire deformation stages could be described by embedding the predicted data of DRV model (i.e., flow stress before the critical strain) into the predicted data by DRX model (i.e., flow stress after the critical strain). The critical strain for initiation of DRX was determined by the double-differentiation method. To evaluate the applicability and effectiveness of DRX kinetics equation, the DRX curves were calculated and were consistent with the microstructure observation. Comparison between the experimental and predicted data shows that the proposed physical-based model can well forecast the flow stress under a wide working domain.

36 MATERIALS SCIENCE↗

Grain Refinement, Microstructure and Mechanical Properties Homogeneity of Mg-Gd-Y-Nd-Zr Alloy During Multidirectional Forging

Multidirectional forging (MDF) of Mg-Gd-Y-Nd-Zr alloy was performed under decreasing temperature condition. The grain refinement, microstructure and mechanical properties homogeneity of Mg-Gd-Y-Nd-Zr alloy during MDF process were investigated. The results show that the grain refinement mechanism of Mg-Gd-Y-Nd-Zr alloy during MDF process was dynamic recrystallization. The dynamic precipitations were observed after MDF process, which were mainly located at the grain boundaries and had a significant influence on the grain refinement, and the amount of dynamic precipitations increased as the MDF passes increase. The microstructure of the billet was not homogeneous due to the deformation and temperature inhomogeneity during MDF process. Optimization MDF process has been proposed, which benefited the microstructure homogeneity and reduced the amount of the dynamic precipitations. Based on the optimization MDF process, the elongation to fracture significantly increased.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of Cast Al-5Zn-2Mg Alloy Subjected to Equal-Channel Angular Pressing

In the present work, cast Al-5Zn-2Mg alloy was processed through equal-channel angular pressing (ECAP) in route B{sub C} up to four number of passes. Microstructure and mechanical properties were investigated on processed and unprocessed materials. In cast condition, the material was composed of dendritic structure. After homogenization treatment, large-sized grains were observed. After ECAP processing, significant grain refinement was observed. After ECAP processing, high-density dislocations and high degree of misorientation between the grains were observed. In cast material, rod-shaped precipitates were observed, while, after ECAP processing, spherical-shaped precipitates were observed. ECAP processing leads to a noticeable improvement in the mechanical properties of the material. After four passes, 122% improvement in the microhardness and 135% improvement in the ultimate tensile strength of the material were observed. After three passes, a slight decrease in the mechanical properties was observed. This is attributed to the dissolution of the metastable η′ phase, annihilation of dislocations, dynamic recrystallization and texturing during ECAP processing. Brittle fracture mode was observed in tensile testing cast and homogenized samples. After ECAP processing, fracture mode was changed into shear fracture mode.

36 MATERIALS SCIENCE↗

Influence of Rotation Rate on Microstructure and Comprehensive Performance of FSWed Mg Alloy

Die-casting AZ31 Mg alloys were successfully friction stir welded at a constant welding speed and different rotation rates. More uniform and fine grains were obtained at the rotation rate of 1400 rpm due to more suitable temperature for dynamic recrystallization in this welding condition. In addition, the intensity of (0001) texture in stir zone increased with the increasing rotation rate. The results of mechanical property test indicated joint with rotation rate of 1400 rpm had better tensile property, which was associated with fine grains, uniform transition in the interface between thermo-mechanically affected zone and stir zone as well as more favorable Schmidt factor for basal slip and twinning. The corrosion resistance of joints increased with the increasing rotation rate, which is significantly related to the (0001) texture with basal plane parallel to the corroded surfaces.

36 MATERIALS SCIENCE↗

A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper

The deformation field in machining was controlled to access a range of deformation parameters—strains of 1–15, strain rates of 10–100,000 s –1 and temperatures of up to 0.4 T m —in the severe plastic deformation (SPD) of copper. This range is far wider than has beenaccessed to date in conventional SPD methods, enabling a study of the interactive effects of the parameters on microstructure andstrength properties. Nano-twinning was demonstrated at strain rates as small as 1000 s –1 at 196 °C and at strain rates of ≥10,000 s –1 even when the deformation temperature was well above room temperature. Bi-modal grain structures were produced ina single stage of deformation through in situ partial dynamic recrystallization. Furthermore, the SPD conditions for engineering specific microstructuresby deformation rate control are presented in the form of maps, both in deformation parameter space and in terms of the Zener–Hollomon parameter. 20

36 MATERIALS SCIENCE↗

Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach

Here, this work presents estimations of average intragranular fluctuations of lattice rotation rates in polycrystalline materials, obtained by means of the viscoplastic self-consistent (VPSC) model. These fluctuations give a tensorial measure of the trend of misorientation developing inside each single crystal grain representing a polycrystalline aggregate. We first report details of the algorithm implemented in the VPSC code to estimate these fluctuations, which are then validated by comparison with corresponding full-field calculations. Next, we present predictions of average intragranular fluctuations of lattice rotation rates for cubic aggregates, which are rationalized by comparison with experimental evidence on annealing textures of fcc and bcc polycrystals deformed in tension and compression, respectively, as well as with measured intragranular misorientation distributions in a Cu polycrystal deformed in tension. The orientation-dependent and micromechanically-based estimations of intragranular misorientations that can be derived from the present implementation are necessary to formulate sound sub-models for the prediction of quantitatively accurate deformation textures, grain fragmentation, and recrystallization textures using the VPSC approach.

36 MATERIALS SCIENCE↗

The formation and characterization of large twin related domains

The enhanced properties of grain boundary engineered metals are a result of their unique microstructures, which contain large clusters of twinned grains, called twin related domains. These large twin related domains in grain boundary engineered Ni were found to form through recrystallization. Orientation mapping showed that sparse nucleation and multiple twinning resulted in twin related domains containing hundreds of grains connected together in complex morphologies. A correlation was found between the size of the twin related domains and the overall twin boundary fraction. The same correlation was also observed in Cu and a Ni superalloy, showing that this is a general observation for grain boundary engineered microstructures. This finding can be understood through the topology of the twin related domains and an accompanying scaling relation is provided. The crystal orientations contained within each twin related domain were observed to depend on both the spatial correlation of twinning variants and the degree of branching in the twin boundary network. The results suggest a natural way of quantifying grain boundary engineered microstructures and provide a step toward making a closer connection between processing, microstructure, and performance.

36 MATERIALS SCIENCE↗

Enhanced high-temperature tensile property by gradient twin structure of duplex high-Nb-containing TiAl alloy

A pre-deformation process was employed for a TiAl alloy via high-temperature torsion, in which the stability of the constituent phases was tailored, resulting in enhanced hardening capability and ductility via a gradient microstructure. A sample with a pre-torsion of 360° exhibited a yield strength of 475 MPa and an ultimate tensile strength of 592 MPa, with a tensile ductility of 47% at 850 °C. The tensile properties were significantly enhanced compared with the as-forged sample, which exhibited values of 395 MPa, 494 MPa, and 4.6%, respectively. The physical mechanisms for the significant enhancement of the mechanical property of the TiAl alloys were studied in-depth via of transmission electron microscopy, electron-backscattered diffraction, and high-energy X-ray diffraction techniques. The high strength is mainly attributed to the twin structure formed during torsion, while high fracture elongation correlates to the recrystallization of the γ phase at twin-twin sections and the load partitioning regulated by a hierarchical microstructure. When the tensile micro-strains along the loading direction and transverse direction in the γ phase of the pre-deformed TiAl alloy, a higher mechanical performance was obtained. Moreover, the fracture mode of the pre-torsional tensile sample is a combination of pores and cleavage facets which resulted from the microstructure after torsion. Finally, the gradient twin structure approach in this study provides a strategy for developing TiAl alloys with exceptionally high-temperature tensile property, and the results of the micromechanical behavior-microstructure-property relationship may improve the understanding of the plastic deformation of TiAl alloys.

36 MATERIALS SCIENCE↗

Towards an understanding of particle-scale flaws and microstructure evolution in cold spray via accumulation of single particle impacts

Cold spray coatings are the sum of countless individual bonding events between single particles impacting on top of one another at high velocities. Thus, the collective behavior of microparticles must be considered to elucidate the origins of coating flaws at the scale of the particles and larger, or the dynamic evolution of the overall coating microstructure. Laser-induced particle impact testing (LIPIT) has been extensively used to study single-particle impacts, and in this work is adapted to study the accumulation of numerous particles with knowledge of each individual particle's impact parameters (particle size, velocity). The method reproducibly deposits stacks of gold particles (>20 particles) with different characteristic spectra of impact velocity. The observation of impact-induced erosion lets us define a critical velocity for material-build-up that is higher than that for single-particle bonding. The quantitative single-particle data are analyzed in a correlative manner to the structure and flaws in the resulting stacks, providing some first statistical connections between, e.g., strain and recrystallization, or aberrant particle characteristics and defects. The results highlight opportunities for the study of many-particle phenomena in microparticle impact—from interaction of particles in cold spray to multi-step erosion processes—with a quantitative view of the behavior of single particles.

Erosion↗

The effect of gyrolite additive on the hydration properties of Portland cement

The influence of gyrolite additive on the hydration properties of ordinary Portland cement was examined. It was found that the additive of synthetic gyrolite accelerates the early stage of hydration of OPC. This compound binds alkaline ions and serves as a nucleation site for the formation of hydration products (stage I). Later on, the crystal lattice of gyrolite becomes unstable and turns into C-S-H, with higher basicity (C/S {approx} 0.8). This recrystallization process is associated with the consumption of energy (the heat of reaction) and with a decrease in the rate of heat evolution of the second exothermic reaction (stage II). The experimental data and theoretical hypothesis were also confirmed by thermodynamic and the apparent kinetic parameters of the reaction rate of C{sub 3}S hydration calculations. The changes occur in the early stage of hydration of OPC samples and do not have a significant effect on the properties of cement stone.

36 MATERIALS SCIENCE↗

Effect of blast furnace slag on self-healing of microcracks in cementitious materials

The physico-chemical process of self-healing in blast furnace slag cement paste was investigated in this paper. With a high slag content i.e., 66% in cement paste and saturated Ca(OH)₂ solution as activator, it was found that the reaction products formed in cracks are composed of C-S-H, ettringite, hydrogarnet and OH–hydrotalcite. The fraction of C-S-H in the reaction products is much larger than the other minerals. Large amount of ettringite formed in cracks indicates the leaching of SO₄⁻² ions from the bulk paste and consequently the recrystallization. Self-healing proceeds fast within 50 h and then slows down. According to thermodynamic modeling, when the newly formed reaction products are carbonated, the filling fraction of crack increases first and then decreases. Low soluble minerals such as silica gel, gibbsite and calcite are formed. Compared to Portland cement paste, the potential of self-healing in slag cement paste is higher when the percentage of slag is high. Highlights: • Self-healing reaction products in slag cement paste were characterized. • Self-healing reaction products formed in time were quantified with image analysis. • Self-healing in slag cement paste was simulated with a reactive transport model. • Effect of carbonation on self-healing was investigated by thermodynamic modeling. • Effect of slag on self-healing was discussed based on experiments and simulation.

36 MATERIALS SCIENCE↗

The influence of seawater carbonate chemistry, mineralogy, and diagenesis on calcium isotope variations in Lower-Middle Triassic carbonate rocks

The geological calcium cycle is linked to the geological carbon cycle through the weathering and burial of carbonate rocks. As a result, calcium (Ca) isotope ratios ( 44 Ca/ 40 Ca, expressed as δ 44/40 Ca) can help to constrain ancient carbon cycle dynamics if Ca cycle behavior can be reconstructed. But, the δ 44/40 Ca of carbonate rocks is influenced not only by the δ 44/40 Ca of seawater but also by diagenetic processes and fractionation associated with carbonate precipitation. In this study, we investigate the dominant controls on carbonate δ 44/40 Ca in Upper Permian to Middle Triassic limestones (ca. 253 to 244 Ma) from south China and Turkey. This time interval is ideal for assessing controls on Ca isotope ratios in carbonate rocks because fluctuations in seawater δ 44/40 Ca may be expected based on several large carbon isotope (δ 13 C) excursions ranging from -2 to + 8‰. Parallel negative δ 13 C and δ 44/40 Ca excursions were previously identified across the end-Permian extinction horizon. Here, we find a second negative excursion in δ 44/40 Ca of ~ 0.2‰ within Lower Triassic strata in both south China and Turkey; however, this excursion is not synchronous between regions and thus cannot be interpreted to reflect secular change in the δ 44/40 Ca of global seawater. Additionally, δ 44/40 Ca values from Turkey are consistently 0.3‰ lower than contemporaneous samples from south China, providing further support for local or regional influences. By measuring δ 44/40 Ca and Sr concentrations ([Sr]) in two stratigraphic sections located at opposite margins of the Paleo-Tethys Ocean, we can determine whether the data represent global conditions (e.g., secular variations in the δ 44/40 Ca of seawater) versus local controls (e.g., original mineralogy or diagenetic alteration). The [Sr] and δ 44/40 Ca data from this study are best described statistically by a log-linear correlation that also exists in many previously published datasets of various geological ages. By using a model of early marine diagenetic water-rock interaction, we illustrate that this general correlation can be explained by the chemical evolution of bulk carbonate sediment samples with different initial mineralogical compositions that subsequently underwent recrystallization. Although early diagenetic resetting and carbonate mineralogy strongly influence the carbonate δ 44/40 Ca values, the relationship between [Sr] and δ 44/40 Ca holds potential for reconstructing first-order secular changes in seawater δ 44/40 Ca composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic Monte Carlo simulations of structural evolution during anneal of additively manufactured materials

Our experiments indicated that upon a post-processing anneal, an additively manufactured 316L stainless steel exhibits cubic grains rather than the conventional equiaxed grains. In this work, we have used kinetic Monte Carlo simulations to explore the origin of these cubic grains. First, we implemented a new kinetic Monte Carlo model in parallel code SPPARKS to simulate grain growth and recrystallization under a residual energy distribution. Our model incorporates physical properties and real-time, as opposed to generic properties and relative time. We further validated that our SPPARKS simulations reproduced the expected kinetic behavior of single-grain evolution. We then used the validated approach to simulate the anneal of an additively manufactured material under the same conditions used in our experiments. We found that the cubic grains can origin from a periodically varying residual energy that may be present in additively manufactured materials.

36 MATERIALS SCIENCE↗

The Mineralogic Transformation of Ferrihydrite Induced by Heterogeneous Reaction with Bioreduced Anthraquinone Disulfonate (AQDS) and the Role of Phosphate

Anthraquinone-2-6-disulfonate (AQDS) enhances electron donor utilization and mineral product crystallization in studies of Fe(III) oxide reductive mineralization by metal reducing bacteria (MRB) through heterogeneous redox reaction. In spite of the strong effect of AQDS in these systems, little information exits on its direct role in reductive mineralization. To provide such insights, bioreduced AQDS (AH2DS; dihydro-anthraquinone) was reacted with a 2-line, Si-substituted ferrihydrite under anoxic conditions at neutral pH in PIPES buffer. Phosphate (P) and bicarbonate (C); common adsorptive oxyanions and media/buffer components known to effect ferrihydrite mineralization; and Fe(II)aq (as a catalytic mineralization agent) were used in comparative experiments. Heterogeneous AH2DS oxidation coupled with Fe(III) reduction occurred within 0.13-1 day, with mineralogic transformation occurring thereafter. The product suite included lepidocrocite, goethite, and/or magnetite, with proportions varing with reductant:oxidant ratio (r:o) and the presence of P or C. Lepidocrocite was the primary product at low r:o in the absence of P or C, with evidence for multiple formation pathways. P inhibited reductive recrystallization, while C promoted goethite formation. Stoichiometric magnetite was the sole product at higher r:o in the absence and presence of P. Lepidocrocite was the primary mineralization product in the Fe(II)aq system, with magnetite observed at near equal amounts when Fe(II) was high [Fe(II)/Fe(III)]=0.5 and P was absent. P had a greater effect on reductive mineralization in the Fe(II)aq system, while AQDS was more effective than Fe(II)aq in promoting magnetite formation. The direct AH2DS-driven reductive reaction pathway produced mineral products that were different from AH2DS-ferrihydite-MRB systems, particularly in presence of P.

58 GEOSCIENCES↗

Origin of sulfide replacement textures in lunar breccias. Implications for vapor element transport in the lunar crust

Lunar samples 67016,294, 67915,150, and 67016,297 represent clasts of Mg-suite and ferroan anorthosite lithologies that have interacted with a S-rich vapor. Numerous studies have speculated on the composition and source of these 'fluids', their capability for the transport of vapor-mobilized elements, and the scale and environment under which these types of process occurred. These models all assumed a Moon with a very 'dry' mantle, crust, and surface. The olivine in these lithologies is partially to totally replaced by troilite and low-Ca pyroxene. The troilite makes up 30-54 vol% of the troilite + low-Ca pyroxene pseudomorphs after olivine. Other silicates and oxides in the assemblages have experienced post-magmatic reequilibration (pyroxene exsolution, recrystallization, 'exsolution' of ilmenite in spinel). The troilite also occurs in veins cross cutting individual phases and metamorphic textures. The sulfide veining and replacement features are restricted to individual clasts and do not cut across the matrix surrounding the clasts, and thus predate the breccia-forming event. The proportion of troilite to low-Ca pyroxene and silicate chemistries indicate that simple reactions (such as olivine + S{sub 2} {leftrightarrow} low-Ca pyroxene + troilite + O{sub 2}) do not adequately represent the replacement process. The sulfides have compositions that are similar to those found in mare basalts. In particular, the sulfides generally are enriched in Co relative to Ni. Exsolution of Ni-Co-Cu in the sulfides is distinctly different between the breccias and mare basalts and suggests a different cooling or crystallization (melt versus vapor) history. The sulfur isotopic composition of the vein and replacement troilite ranges from approximately {delta}{sup 34}S = -1.0{per_thousand} to -3.3{per_thousand}. Based on our observations, it appears that the model suggested by Norman et al. (1995) is the most appropriate for the origin of the troilite veining and troilite-pyroxene pseudomorphs after olivine. Our data add significant definition to this model. This process occurs in the relatively shallow lunar crust on a scale that involves vapor interaction with multiple plutonic lithologies of various ages and compositions. These reactions occur at distinct conditions of f{sub S{sub 2}}, f{sub O{sub 2}}, and temperature. The reacting vapor is S-rich, and perhaps low in H. The reduction of the oxides in the clasts was not a product of H-streaming as has been suggested for similar textures in lunar rocks, but more likely related to 'S-streaming'. These vapors had the capability to transport chalcophile-siderophile elements. However, a proportion of the minor elements making up the troilite (Fe, Ni, Co) did come directly from the olivine being replaced. Further, there is evidence to suggest minor mobility of Mg from the olivine pseudomorphs into the adjacent pyroxene. One of the heat sources driving the transport of elements is closely tied to the emplacement of magmas into the shallow lunar crust. These intrusions were either the source for the S or provided heat to remobilized troilite already in the lunar crust. The process that drove the derivation of the S-rich volatiles was instrumental in fractionating the isotopic composition of S. The enrichment of S{sup 32} in the vapor phase may be attributed to either the stable S species during degassing (COS, S{sub 2} and CS{sub 2}) or the high-temperature partial breakdown of troilite in the shallow crust.

58 GEOSCIENCES↗

Fate of arsenic during the interactions between Mn-substituted goethite and dissolved Fe(II)

Geogenic arsenic has become a globally-distributed groundwater contaminant, liberated from the weathering of arsenic-bearing sulfide minerals and often transported to aquifer sediments adsorbed to iron oxides. Among the iron oxides, goethite (α-FeOOH) is uniquely important for the fate of arsenic because of its widespread abundance, stability, and high affinity for binding arsenic. Goethite is ubiquitous in soils and sediments and often contains substituted elements, including manganese. Structural manganese may affect the surface reactivity and redox capacity of goethite and alter the mechanisms of recrystallization catalyzed by dissolved Fe(II), potentially affecting arsenic adsorption. Here, this study examined the fate of As(V) during the interactions between dissolved Fe(II) and Mn-substituted goethites at pH 4 and 7 as well as associated changes in arsenic speciation. At pH 7, the addition of dissolved Fe(II) initially increases the adsorption of As(V) onto Mn-bearing and Mn-free goethites. For the Mn-substituted goethites, the adsorbed As(V) slowly releases to solution at longer aging times. Fe(II) addition at pH 4 slightly increases As(V) uptake by Mn-substituted goethites, with differences in total sorption correlating with the Mn content in goethite. The addition of Fe(II) releases substantial dissolved manganese but the amount solubilized is higher at pH 4 compared to 7, suggesting that the presence of adsorbed As(V) may substantially promote the Mn release at pH 4. X-ray absorption fine structure spectroscopy shows that arsenic is stabilized as As(V) in all the samples and adsorbed on goethite via a bidentate binuclear mechanism. Fitting results show that the binding distance and coordination numbers are stable in Mn-free goethite and Mn-substituted goethite samples; the effect of substituted Mn on the surface complex structure is minor. High resolution transmission electron microscopy and X-ray diffraction confirm that no secondary ferrous arsenate minerals precipitate under both pH conditions. This study improves our understanding of the Fe(II)-As(V) interactions on iron oxides, and demonstrates that the substituted cations such as manganese may quantitatively alter the geochemical fate of arsenic during the reaction of dissolved Fe(II) with Fe(III) oxides.

58 GEOSCIENCES↗

Modeling shock-induced void collapse in single-crystal Ta systems at the mesoscales

Understanding the role of microstructural heterogeneities on the shock wave propagation and defect evolution behavior is essential to predicting the dynamic response of metals. Heterogeneities, such as voids, provide challenges to understanding the wave propagation behavior as the shock-void interaction can collapse the void and result in large plastic strains and significant heating (hot spot formation) in the metal. Accurate modeling of this phenomenon requires predicting the void collapse mechanisms and the related heat generation and dissipation mechanisms (hotspot formation) that determine the microstructure evolution. While molecular dynamics (MD) simulations can model the void collapse behavior, the time/length scale capabilities pose a challenge to connect with continuum models or the experimental scales. Here, this study presents the capability of the newly developed quasi-coarse-grained dynamics (QCGD) method that extends the MD simulations to larger system sizes and longer times to model this phenomenon. This study uses QCGD simulations to investigate the mechanisms of shock wave interactions with pre-existing voids in single-crystal Ta microstructures for variations in shock pressures, void size, and loading orientations. For a given orientation, the plasticity contributions and rates of void collapse are observed to vary with shock pressures and void size. The larger void sizes and higher pressures result in increased temperatures (hot spots) and faster void collapse rates and unravel the variations in the plasticity contributions. In addition, QCGD simulations investigate the post-collapse microstructure evolution as a release wave travels through the hot spot region. The simulations reveal that the reduction in temperatures due to heat dissipation initiates the dynamic recrystallization behavior in the hotspot regions.

36 MATERIALS SCIENCE↗

Analysis of Abrasive Blasting of DOP-26 Iridium Alloy

The effects of abrasive blasting on the surface geometry and microstructure of DOP-26 iridium alloy (Ir-0.3% W-0.006% Th 0.005% Al) have been investigated. Abrasive blasting has been used to control emissivity of components operating at elevated temperature. The effects of abrasive blasting conditions on surface morphology were investigated both experimentally and by numerical modeling. The simplified model, based on finite element analysis of a single angular particle impacting on Ir alloy disk, calculates the surface deformation and residual strain distribution. The experimental results and modeling results both indicate that the surface geometry is not sensitive to the abrasive blast process conditions of nozzle pressure and standoff distance considered in this study. On the other hand, the modeling results suggest that the angularity of the abrasive particle has an important role in determining surface geometry, which in turn, affects the emissivity. Abrasive blasting causes localized surface strains and localized recrystallization, but it does not affect grain size following extended exposure at elevated temperature. The dependence of emissivity of the DOP-26 alloy on mean surface slope follows a similar trend to that reported for pure iridium.

36 MATERIALS SCIENCE↗