Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RESTRAINTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Buckling of simply supported plate assemblies subject to shear loading

An analysis is presented of the shear buckling load of an arbitrary simply-supported prismatic plate assembly or stiffened panel configuration. The method utilizes stiffness matrices developed by Wittrick (1968). For the restraint of simple support along edges perpendicular to the longitudinal direction, various wavelengths of response are combined using an energy method that involves only a boundary integral. Numerical results for plate and panel configurations show the accuracy and convergence of the method.

Anderson, M. S.↗

The effects of dust in H II regions

The materials of which dust is composed are not known very precisely, but a general theorem in physics (the Kramers-Kronig relations) provides sufficient restraints regarding the cross section of dust in the ionizing ultraviolet. The large far-infrared luminosity of H II regions shows that dust absorbs most of the ionizing photons in them. However, models show that dust has little effect on the nebular spectrum, although of course it does tie up some heavy elements in the solid phase. For nebulae with very high excitation parameters the effect is potentially larger, but dust is strongly depleted, relative to the solar neighborhood, in such objects. Furthermore, the effects of large densities quenching the forbidden cooling lines, and thereby affecting the optical emission lines, is probably more important.

Mathis, John S.↗

Experimental and theoretical investigation of passive damping concepts for member forced and free vibration

Potential passive damping concepts for use in space structures are identified. The effectiveness of copper brush, wool swab, and silly putty in chamber dampers is investigated through natural vibration tests on a tubular aluminum member. The member ends have zero translation and possess partial rotational restraints. The silly putty in chamber dampers provide the maximum passive damping efficiency. Forced vibration tests are then conducted with one, two, and three damper chambers containing silly putty. Owing to the limitation of the vibrator used, the performance of these dampers could not be evaluated experimentally until the forcing function was disengaged. Nevertheless, their performance is evaluated through a forced dynamic finite element analysis conducted as a part of this investigation. The theoretical results based on experimentally obtained damping ratios indicate that the passive dampers are considerably more effective under member natural vibration than during forced vibration. Also, the maximum damping under forced vibration occurs at or near resonance.

Razzaq, Zia↗

A comparison of theory and experiment for the aeroelastic stability of a bearingless model rotor in hover

Three cases were selected for correlation from an experiment that examined the aeroelastic stability of a small-scale bearingless motor rotor in hover. The 1.8 m diameter model rotor included flap, lead-lag, and torsional degrees of freedom, but no body degrees of freedom. The first case looked at a configuration with a single pitch link on the leading edge, the second case examined a configuration with a single pitch link on the trailing edge, and the third case examined a configuration with pitch links on the leading and trailing edges to simulate a pitch link with shear restraint. Analyses from Bell Helicopter Textron, Boeing Vertol, Hughes Helicopters, Sikorsky Aircraft, and the U.S. Army Aeromechanics Laboratory were compared with the data, and the correlation ranged from poor to fair.

Dawson, Seth↗

Crew factors in the design of the Space Station

The designing of Space Shuttle modules and equipment in order to provide a stimulating and efficient work atmosphere and a pleasant living environment is examined. The habitation module for the eight crew members is divided into four areas: ceiling, floor, port, and starboard. The module is to consist of crew quarters, a wardroom, a galley, a personal hygiene facility, a health maintenance facility, and stowage areas. There is a correlation between the function of the module and its location; for example the galley will be near the wardroom and the personal hygiene facility near the crew quarters. The designs of the equipment for crew accommodation and of the equipment to be maintained and repaired by the crew will be standarized. The design and functions of the crew and equipment restraints, crew mobility aids, racks to contain equipment, and functional units are described.

Robinson, Judith L.↗

Comparative aspects of hematological responses in animal and human models in simulations of weightlessness and space flight

This paper reviews some human and animal responses to space flight as well as in control models in simulations of weightlessness. Astronauts after space flight have been found to have a decreased red blood cell mass and plasma volume. The reason for these changes is unknown but appears to be caused primarily by a decrease in the need of red blood cells in the weightless condition. Similar though more moderate changes have been found in human subjects subjected to prolonged bed rest or water immersion. What happens to the red cell mass of laboratory rats flown in microgravity is not known but rats have shown an increase in the rate of random red cell loss in flight suggesting a probable decrease. Rat models subjected to either head-down suspension or restraint alone have shown a decrease in red blood cell masses and a decrease in their plasma volume.

Lange, R. D.↗

Psychiatric Components of a Health Maintenance Facility (HMF) on Space Station

The operational psychiatric requirements for a comprehensive Health Maintenance Facility (HMF) on a permanently manned Space Station are examined. Consideration is given to the psychological health maintenance program designed for the diagnosis of mental distress in astronauts during flight and for prevention of mental breakdown. The types of mental disorders that can possibly affect the astronauts in flight are discussed, including various organic, psychotic, and affective mental disorders, as well as anxiety, adjustment, and somatoform/dissociative disorders. Special attention is given to therapeutic considerations for psychiatric operations on Space Station, such as restraints, psychopharmacology, psychotherapy, and psychosocial support.

Patricia A Santy↗

New tools for EVA operations

Effective extravehicular-activity (EVA) operations depend upon having the proper tools from simple wrenches to smart powered socket drives to powered adjustable foot restraints. The Space Shuttle carries a standard toolkit in the cargo bay for emergencies. Many special tools have been developed for the recent satellite repair missions; i.e., Solar Max, Westar/Palapa, and Leasat. Many more are being developed to maintain the Hubble Space Telescope on orbit for 15 years. The EVA tools developed and used in space to date are summarized and some of the new tools now in development are described herein. Finally, the requirements are given for several additional tools which may be needed in the future.

Whitsett, C. E.↗

Aeroelastic stability of bearingless rotors in forward flight

The finite element method was used to determine the dynamic stability of bearingless rotor blades (BR) in forward flight. The analysis was applied to four different BR configurations and the results were correlated with experimental data. The analysis was correlated with hover lag mode stability data for a simple three-blade BR rotor tested in various pitch link configurations. In addition, a more advanced BR which includes precone, blade twist, blade sweep, and a lag shear restraint is analyzed and compared to experimental data in both hover and forward flight.

Dull, Andrew L.↗

Habitability in long-term space missions

The research (both in progress and completed) conducted for the U.S. Space Station in relation to the crew habitability and crew productivity is discussed. Methods and tasks designed to increase the data base of the man/system information are described. The particular research areas discussed in this paper include human productivity, on-orbit maintenance, vewing requirements, fastener types, and crew quarters. This information (along with data obtained on human interaction with command/control work station, anthropometic factors, crew equipment, galley/wardroom, restraint systems, etc) will be integrated into the common data base for the purpose of assisting the design of the Space Station and other future manned space missions.

Mount, Frances E.↗

Air resonance of an advanced bearingless rotor in forward flight

The air resonance of an advanced bearingless rotor in forward flight is investigated using a finite element formulation in space and time. The flexbeam, the torque tube, and the outboard blade are modeled as individual elastic beams, and the formulation includes five rigid body degrees of motion. It is shown that a large increase in stability is achieved by increased negative pitch-lag coupling arising from the vertical offset of the cuff restraint pin. It is also shown that body inertia has a significant effect on stability.

Jang, Jinseok↗

Test stand for Titan 34D SRM static firing

An existing liquid engine test stand at the AF Astronautics Laboratory was refurbished and extensively modified to accommodate the static firing of the Titan 34D solid rocket motor (SRM) in the vertical nozzle down orientation. The main load restraint structure was designed and built to secure the SRM from lifting off during the firing. In addition, the structure provided weather protection, temperature conditioning of the SRM, and positioning of the measurement and recording equipment. The structure was also used for stacking/de-stacking of SRM segments and other technological processes. The existing stand, its foundation and anchorage were thoroughly examined and reanalyzed. Necessary stand modifications were carried out to comply with the requirements of the Titan 34D SRM static firing.

Glozman, Vladimir↗

Results of EVA/mobile transporter space station truss assembly tests

Underwater neutral buoyance tests were conducted to evaluate the use of a Mobile Transporter concept in conjunction with EVA astronauts to construct the Space Station Freedom truss structure. A three-bay orthogonal tetrahedral truss configuration with a 15 foot square cross section was repeatedly assembled by a single pair of pressure suited test subjects working from the Mobile Transporter astronaut positioning devices (mobile foot restraints). The average unit assembly time (which included integrated installation of utility trays) was 27.6 s/strut, or 6 min/bay. The results of these tests indicate that EVA assembly of space station size structures can be significantly enhanced when using a Mobile Transporter equipped with astronaut positioning devices. Rapid assembly time can be expected and are dependent primarily on the rate of translation permissible for on-orbit operations. The concept used to demonstate integrated installation of utility trays requires minimal EVA handling and consequentially, as the results show, has little impact on overall assembly time.

Watson, Judith J.↗

Finite element modeling of frictionally restrained composite interfaces

The use of special interface finite elements to model frictional restraint in composite interfaces is described. These elements simulate Coulomb friction at the interface, and are incorporated into a standard finite element analysis of a two-dimensional isolated fiber pullout test. Various interfacial characteristics, such as the distribution of stresses at the interface, the extent of slip and delamination, load diffusion from fiber to matrix, and the amount of fiber extraction or depression are studied for different friction coefficients. The results are compared to those obtained analytically using a singular integral equation approach, and those obtained by assuming a constant interface shear strength. The usefulness of these elements in micromechanical modeling of fiber-reinforced composite materials is highlighted.

Ballarini, Roberto↗

Instability-related delamination growth in thermoset and thermoplastic composites

Mixed-mode crack propagation in compressively loaded thermoset and thermoplastic composite columns with an imbedded through-width delamination is investigated. Beam theory is used to analyze the geometrically nonlinear load-deformation relationship of the delaminated subregion. The elastic restraint model (ERM), combined with existing FSM modeling of the crack-tip region, yields expressions for the Mode I and Mode II components of the strain energy release rate G(I) and G(II) to predict the critical load at the onset of delamination growth. Experimental data were generated for geometries yielding a wide range of G(I)/G(II) ratios at the onset of crack growth. A linear mixed-mode crack growth criterion in conjunctuion with the ERM provides good agreement between predicted and measured critical loads for both materials studied.

Gillespie, John W., Jr.↗

Heterogeneity in the nebula - Evidence from stable isotopes

Meteoritic isotopic evidence, primarily for O, which defines the existence of different nebular reservoirs, is analyzed. The internal isotopic systematics (for chondrules and incisions) is analyzed as well as its role in placing restraints on conditions and processes in the solar nebula. Questions pertaining to the actual origin of these reservoirs are addressed.

Thiemens, Mark H.↗

Independent Orbiter Assessment (IOA): Analysis of the remote manipulator system

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items (PCIs). To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The independent analysis results for the Orbiter Remote Manipulator System (RMS) are documented. The RMS hardware and software are primarily required for deploying and/or retrieving up to five payloads during a single mission, capture and retrieve free-flying payloads, and for performing Manipulator Foot Restraint operations. Specifically, the RMS hardware consists of the following components: end effector; displays and controls; manipulator controller interface unit; arm based electronics; and the arm. The IOA analysis process utilized available RMS hardware drawings, schematics and documents for defining hardware assemblies, components and hardware items. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode. Of the 574 failure modes analyzed, 413 were determined to be PCIs.

Tangorra, F.↗

Proposal for a zero-gravity toilet facility for the space station

This proposed toilet facility has a straightforward design. It has few moving parts and is easily maintained. Air and water flow provide sanitary movement of the waste. The toilet's chambers are coated with Teflon which, along with the water flow, makes it self-cleaning. An added disinfectant called Betadiene kills any bacteria that may form on the chamber walls. The chair is contoured to take into account the neutral body position and the necessary strain position for defecation. Restraints at the ankles, knees, and midsection hold the body in the chair. The waste is stored in discs of Gortex material which are inside a replaceable storage chamber. This chamber can be removed, capped and stored until eventual return to earth.

Fleri, Edgar L., Jr.↗