Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Laminate behavior for SiC fiber-reinforced reaction-bonded silicon nitride matrix composites

The room temperature mechanical properties of SiC fiber reinforced reaction-bonded silicon nitride matrix composite laminates (SiC/RBSN) have been measured. The laminates contained approx 30 volume fraction of aligned 142-micron diameter SiC fiber in a porous RBSN matrix. Three types of laminate studied were unidirectional: (1) (0) sub 8, (2) (10) sub 8, and (3) (45) sub 8, and (90) sub 8; cross plied laminates (0 sub 2/90 sub 2); and angle plied laminates: (+45 sub 2/-45 sub 2). Each laminate contained eight fiber plies. Results of the unidirectionally reinforced composites tested at various angles to the reinforcement direction indicate large anisotropy in in-plane properties. In addition, strength properties of these composites along the fiber direction were independent of specimen gage length and were unaffected by notches normal to the fiber direction. Splitting parallel to the fiber at the notch tip appears to be the dominant crack blunting mechanism responsible for notch insensitive behavior of these composites. In-plane properties of the composites can be improved by 2-D laminate construction. Mechanical property results for (0 sub 2/90 sub 2)sub s and (+45/-45 sub 2) sub s laminates showed that their matrix failure strains were similar to that for (0) sub 8 laminates, but their primary elastic moduli, matrix cracking strengths, and ultimate composite strengths were lower. The elastic properties of unidirectional, cross-ply, and angle-ply composites can be predicted from modified constitutive equations and laminate theory. Further improvements in laminate properties may be achieved by reducing the matrix porosity and by optimizing the bond strength between the SiC fiber and RBSN matrix.

Rhatt, R. T.↗

Multiple boundary condition testing error analysis

Techniques for interpreting data from multiple-boundary-condition (MBC) ground tests of large space structures are developed analytically and demonstrated. The use of MBC testing to validate structures too large to stand alone on the ground is explained; the generalized least-squares mass and stiffness curve-fitting methods typically applied to MBC test data are reviewed; and a detailed error analysis is performed. Consideration is given to sensitivity coefficients, covariance-matrix theory, the correspondence between test and analysis modes, constraints and step sizes, convergence criteria, and factor-analysis theory. Numerical results for a simple beam problem are presented in tables and briefly characterized. The improved error-updating capabilities of MBC testing are confirmed, and it is concluded that reasonably accurate results can be obtained using a diagonal covariance matrix.

Glaser, R. J.↗

Uncertainty estimates in geomagnetic field modeling

This paper presents an extension of the conventional uncertainty analysis which characterizes the sources of uncertainty in the coefficients of the geomagnetic field models. The new formalism accounts for the systematic errors introduced by the omission of such sources as the presence of crustal fields, the external fields, and the field from the truncated terms. The usefulness of this formalism depends on two critical conditions. The first of these is the knowledge of the statistical properties of the fields whose parameters are not solved in the analysis, i.e., the crustal field and the external field. The second critical point in the practical use of the method is the approximation used for the weight matrix.

Langel, R. A.↗

Fibronectin gene expression, synthesis and accumulation during in vitro differentiation of chicken osteoblasts

A well-defined chicken osteoblast culture system(18) has been used to examine fibronectin (FN) mRNA levels, synthesis, and accumulation during in vitro differentiation and matrix mineralization. Immunofluorescent staining of cells after 6 or 18 days in culture revealed that FN was initially associated with the cell surface and in partial coalignment with cytoskeletal elements while at the latter time most FN was associated with the extracellular matrix as a ubiquitous fibrillar network. Western blot analysis of total cell-associated proteins also detected FN at all culture times. However, when results were normalized to cellular DNA, FN levels increased until 12-16 and remained relatively constant thereafter. Similarly, FN synthesis as measured by [35S]-methionine labeling, and immunoprecipitation was greatest in early cultures (culture day 3) and then declined such that synthesis decreased 60% at day 18 and 94% after 24-31 days. FN mRNA levels as measured by Northern blot analysis were well correlated with FN synthesis. These results clearly show that FN is made by primary osteoblasts during their in vitro maturation. In contrast to other osteoblast markers such as alkaline phosphatase, osteocalcin, and osteopontin, whose expression increases as cells differentiate, FN accumulates in the matrix during periods of early cell growth and attachment and then remains proportional to cell number. Results with FN differ from those obtained with collagen which continues to accumulate in the extracellular matrix during osteoblast maturation. These results are consistent with FN being important for the initial attachment of early osteoblasts or osteoblast precursors to the pericellular matrix.

NASA Discipline Musculoskeletal↗

Nuclear thermal design of high temperature gas-cooled reactor with SiC/C mixed matrix fuel compacts - 18410

Japan Atomic Energy Agency (JAEA) has started R and D on SiC/C mixed matrix fuel element of high temperature gas-cooled reactors (HTGRs) to improve oxidation resistance of fuel. Nuclear thermal design of HTGR with SiC/C mixed matrix fuel compacts was carried out as a part of above R and Ds. Nuclear thermal design was carried out based on a small sized HTGR for developing countries, HTR50S, which thermal power is 50 MW and burn-up period is 2 years. Maximum enrichment of uranium is set to be 10 wt%, because coated fuel particles with 10 wt% uranium have been fabricated in Japan. Numbers of kinds of enrichment and burnable poisons (BPs) were set to be same as those of original HTR50S (3 and 2, respectively). We succeeded in nuclear thermal design of a small sized HTGR which performance was equivalent to original HTR50S, with SiC/C mixed matrix fuel compacts. Based on nuclear thermal design, intactness of coated fuel particles was evaluated to against internal pressure increase by burnup. It was shown that intactness was kept for burnup condition of HTR50S. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Back-to-back dijet production in DIS at arbitrary Bjorken x: TMD gluon distributions to twist-3 accuracy

We derive the gluon transverse-momentum-dependent (TMD) operator structure of back-to-back\\\\r\\\\nquark–antiquark dijet production in deep inelastic scattering at arbitrary Bjorken-x to twist-3 ac\\\\r\\\\ncuracy. Working at leading order in the strong coupling and in the kinematic regime where the\\\\r\\\\ntransverse momentum imbalance of the jets is much smaller than their individual transverse mo\\\\r\\\\nmenta, we perform a systematic gradient expansion of the quark propagator in a background gluon\\\\r\\\\nfield. This expansion organizes multiple interactions with the target in terms of longitudinal Wilson\\\\r\\\\nlines and gauge-invariant field-strength insertions, yielding a TMD description valid beyond the\\\\r\\\\nstrict high-energy eikonal (x → 0) approximation. We obtain explicit cross sections for longitudi\\\\r\\\\nnally and transversely polarized virtual photons, identifying all contributing gluon TMD operators\\\\r\\\\nup to twist-3, including structures involving F+−, Fij, and three-gluon correlators. The full lon\\\\r\\\\ngitudinal phase eixP+z− associated with Bjorken-x is retained throughout. In the small-x limit,\\\\r\\\\nour results reproduce the known sub-eikonal expressions obtained in the Color Glass Condensate\\\\r\\\\nframework, establishing a direct connection between the general-x TMD expansion and high-energy\\\\r\\\\nfactorization. We further reduce the operator basis using equations of motion, minimizing the num\\\\r\\\\nber of independent nonperturbative matrix elements entering the cross section. This work provides\\\\r\\\\na systematic foundation for extending TMD analyses of dijet production beyond leading twist, es\\\\r\\\\ntablishing a unified operator framework valid at arbitrary Bjorken-x that smoothly interpolates\\\\r\\\\nbetween moderate- and small-x descriptions of gluon TMDs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fuel Matrix Degradation Model Development Update: Alloy Corrosion Rates and Hydrogen Generation

This work is being performed as part of the DOE NE Spent Fuel and Waste Science and Technology Campaign, Argillite and Crystalline Rock R&D work packages: SF-19AN01030101 and SF-19AN01030201. This document meets the milestone M4SF-19AN010301013 for Argillite R&D and the milestone M4SF-19AN010302013 for Crystalline R&D. The fuel matrix degradation (FMD) model calculates the degradation rate of spent UO2 fuel based on fundamental electrochemical theory and thermodynamics. The model provides the quantitative basis for radionuclide source term predictions in the generic disposal system analysis (GDSA) performance assessment (PA) model. The FMD model has been implemented in a manner that facilitates its integration with the GDSA-PA code and a preliminary, integrated FMD-GDSA model has been successfully tested (Jerden et al., 2017). The specific focus of on-going work is to accurately and quantitatively represent the generation of H2 in a breached waste package and its effect on the spent fuel degradation rate so that this key process can be accurately represented in PA models. It has been shown experimentally that millimolar concentrations of dissolved H2 in contact with spent fuel will inhibit oxidative dissolution and decrease the fuel degradation rates by as much as three orders of magnitude (e.g., Röllin et al., 2001, Ollila, 2008). This will lead to a significant decrease in the radionuclide source term values used in repository PA models. Sensitivity studies using the FMD model have shown that the dissolved H2 concentration is the dominant environmental variable affecting the UO2 spent fuel dissolution rate as long as a source of H2 persists in the breached waste package (Jerden et al., 2015). Therefore, on-going experimental and modeling efforts focus on H2 production, accumulation and interfacial reactions within a breached waste package. The anoxic corrosion of metallic engineering materials within a breached waste package will be the main source of H2 in crystalline and argillite rock repository systems. The most important H2-producing alloys present within a waste package include stainless steel, carbon steel, and aluminum alloys and the Zircaloy fuel cladding. A steel corrosion module was added to the FMD model to account for these H2 sources and couple the H2 generation rate with fuel degradation processes (Jerden et al., 2017). As discussed below, there is a need for experimental data from electrochemical corrosion tests to quantify the H2 generation rates due to the corrosion of these waste package alloys as a function of key environmental variables (Eh, pH, groundwater chemistry). This report presents results from series of electrochemical corrosion tests with materials present in waste packages that provide information needed to parameterize and validate the FMD model. The alloys tested include 316L stainless steel (316SS), AISI 4320 carbon steel (C-steel) and Zircaloy-4 fuel cladding (unirradiated). Potentiodynamic polarization and potentiostatic polarization tests were performed in buffer solutions at pH 4, 7 and 10 with NaCl concentrations of 0, 4 and 100 millimolar (mM). The potentiostatic tests were performed at voltages varying from 0.5 volts down to -0.66 volts, vs the standard hydrogen electrode (SHE), and all tests were performed at laboratory ambient temperatures (~22 °C). The corrosion rates measured during the electrochemical tests were used as direct input to a new FMD/in-package chemistry model that is being developed to provide accurate long-term spent fuel degradation rates as chemical conditions (Eh, pH, speciation) evolve within a breached waste package. This new model was developed by coupling the FMD model with the reactive transport code X1t, which is a module within the Geochemist’s Workbench (GWB) reaction path modeling code (Jerden et al., 2019). The reactive transport model consists of a 1D domain discretized with 21 reaction diffusion cells and includes a single waste packag

Jerden, James↗

In-situ high energy X-ray diffraction study of deformation behavior in Nb nanoparticle-martensitic NiTi composite wire

Here, this study investigated the deformation behavior in Nb nanoparticle-martensitic NiTi composite wire during tensile loading by means of in-situ high-energy X-ray diffraction. Compared to Nb nanowires, the dispersedly distributed Nb nanoparticles have little effect on the transformation and deformation behaviors of NiTi matrix, causing the absence of R phase transformation and the occurrence of deformation twinning in NiTi matrix. Meanwhile, the occurrence of deformation twinning in NiTi matrix can reduce the shape strain to be coordinated by the unfavorable orientated martensite variants, and thus decreases the internal stress among NiTi martensite variants generated during martensite reorientation process. In addition, TEM result proved that Nb nanoparticles can achieve exceptionally large elastic strain in B19'-NiTi matrix (~4%), just as Nb nanowires. However, this large elastic strain (stress) will be released with the occurrence of NiTi deformation twinning.

36 MATERIALS SCIENCE↗

Asymmetric Higgs sector and neutrino mass in an SU(2){sub R} model

The asymmetric Higgs sector of one SU(2){sub L}xSU(2){sub R} bidoublet ({phi}{sub 1}{sup 0},{phi}{sub 1}{sup -};{phi}{sub 2}{sup +},{phi}{sub 2}{sup 0}) and one SU(2){sub R} doublet [but no SU(2){sub L} doublet] is considered in a nonsupersymmetric left-right extension of the standard model of particle interactions. The inverse seesaw mechanism for neutrino mass is naturally implemented with the addition of fermion singlets, allowing thereby the possibility of breaking SU(2){sub R} at the TeV scale. Flavor-changing neutral Higgs couplings to quarks are studied in two scenarios, where the SU(2){sub R} charged-current mixing matrix is given either by the Cabibbo-Kobayashi-Maskawa matrixV{sub R}=V{sub CKM} (scenario I) or V{sub R}=1 (scenario II). We consider the bounds on these scalar particle masses from K-K and B-B mixing, as well as b{yields}s{gamma}. We find that, whereas in scenario I, they are of order 10 TeV, as in other left-right models, they may be well below 1 TeV in scenario II, thus allowing them to be within reach of detection at the forthcoming Large Hadron Collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of Control Mode and R-Ratio on the Fatigue Behavior of a Metal Matrix Composite

Composite Because of their high specific stiffness and strength at elevated temperatures, continuously reinforced metal matrix composites (MMC's) are under consideration for a future generation of aeropropulsion systems. Since components in aeropropulsion systems experience substantial cyclic thermal and mechanical loads, the fatigue behavior of MMC's is of great interest. Almost without exception, previous investigations of the fatigue behavior of MMC's have been conducted in a tension-tension, load-controlled mode. This has been due to the fact that available material is typically less than 2.5-mm thick and, therefore, unable to withstand high compressive loads without buckling. Since one possible use of MMC's is in aircraft skins, this type of testing mode may be appropriate. However, unlike aircraft skins, most engine components are thick. In addition, the transient thermal gradients experienced in an aircraft engine will impose tension-compression loading on engine components, requiring designers to understand how the MMC will behave under fully reversed loading conditions. The increased thickness of the MMC may also affect the fatigue life. Traditionally, low-cycle fatigue (LCF) tests on MMC's have been performed in load control. For monolithic alloys, low-cycle fatigue tests are more typically performed in strain control. Two reasons justify this choice: (1) the critical volume from which cracks initiate and grow is generally small and elastically constrained by the larger surrounding volume of material, and (2) load-controlled, low-cycle fatigue tests of monolithics invariably lead to unconstrained ratcheting and localized necking--an undesired material response because the failure mechanism is far more severe than, and unrelated to, the fatigue mechanism being studied. It is unknown if this is the proper approach to composite testing. However, there is a lack of strain-controlled data on which to base any decisions. Consequently, this study addresses the isothermal, LCF behavior of a [0]_32 MMC tested under strain- and load-controlled conditions for both zero-tension and tension-compression loading conditions. These tests were run at 427 C on thick specimens of SiC-reinforced Ti-15-3. For the fully-reversed tests, no difference was observed in the lives between the load- and strain-controlled tests. However, for the zero-tension tests, the strain-controlled tests had longer lives by a factor of 3 in comparison to the load-controlled tests. This was due to the fact that under strain-control the specimens cyclically softened, reducing the cracking potential. In contrast, the load-controlled tests ratcheted toward larger tensile strains leading to an eventual overload of the fibers. Fatigue tests revealed that specimens tested under fully-reversed conditions had lives approximately an order of magnitude longer than for those specimens tested under zero tension. When examined on a strain-range basis, the fully reversed specimens had similar, but still shorter lives than those of the unreinforced matrix material. However, the composite had a strain limitation at short lives because of the limited strain capacity of the brittle ceramic fiber. The composite also suffered at very high lives because of the lack of an apparent fatigue limit in comparison to the unreinforced matrix. The value of adding fibers to the matrix is apparent when the fatigue lives are plotted as a function of stress range. Here, the composite is far superior to the unreinforced matrix because of the additional load-carrying capacity of the fibers.

Source record↗

Geo-polymer solidification technology approved by Czech / Slovak nuclear authority to immobilise NPP resins and sludge waste - 15555

This paper presents the features and performance record of the geo-polymer solidification technology, SIAL{sup R}, licensed for use by both the Slovakian (UJD SR) and Czech Nuclear (SUJB) regulators. An overview of its performance at Bohunice in Slovakia, where it has been used to successfully treat resins and sludge wasteforms will be provided along with references to other plants where it has been used. More recently, geo-polymers have been noted as an immobilization technology which shows potential for resins produced by treatment of radioactive contaminated water resulting from the clean-up of the Fukushima Daiichi Plant. The Nuclear Power Plant A-1 located in Jaslovske Bohunice was completed in 1972 and operated for 5 years until two accidents in 1976 and 1977. After the second accident in February 1977 (INES level 4) the Nuclear Power Plant was permanently shut down for decommissioning. Fuel assemblies and fuel cladding damaged in the accidents led to significant Sr-90, Cs-137 and transuranic contamination. As a consequence of the long-term corrosion of the barrier's material, highly contaminated sludge accumulated which could not be effectively immobilized using conventional methods such as cementation or bitumen treatment due to adverse physical-chemical properties and high specific activity of the waste (Cs-137). This challenge led to AMEC developing and licensing the geo-polymer, SIAL{sup R}. Today, this geo-polymer is one of the most proven and widely used for on-site solidification of radioactive materials such as sludge, resins, sorbents and organic liquids. There are numerous benefits to using this geo-polymer for waste immobilisation. It can be used at room temperature and can incorporate up to approximately four times as much waste (sludge, resin) as a Portland cement matrix equivalent depending on the waste being treated. In addition, it is characterized by excellent mechanical and physical properties, compared with the earlier generation techniques. This includes higher mechanical strength, lower leachability, low volatility, posing a low fire risk and excellent physical stability in the presence of frost and water (no distortion or cracking). Dedicated facilities to receive and encapsulate waste from different locations can be created but this geo-polymer can also provide efficient and practical on-site treatment of radioactive waste streams. This is achievable because the equipment used to encapsulate waste using SIAL{sup R} is also modular, flexible and versatile. At Bohunice, the facility for encapsulation was designed to occupy existing areas of the plant in close proximity to the tanks where the waste was being stored. This allowed for the removal of the waste using Remote Operated Vehicles (ROVs) and for the waste to be immediately treated on site without the need for transportation saving both time and resource. To achieve this, some of the rooms and areas of the building were assessed and modified to ensure that the waste package flow was suitable whilst ensuring that appropriate safety measures were in place such as adequate shielding to reduce or entirely eliminate dose uptake of workers. To date, SIAL{sup R} has been used to successfully immobilize approximately 500 tons of waste which includes sludge and resin from Bohunice, Slovakia and approximately 250 m{sup 3} of spent ion exchange resins from tanks on site at the Dukovany nuclear plant, Czech Republic. It now has a track record of over 15 years which includes on-going research and development. The International missions WANO and OSART evaluated the SIAL{sup R} matrix technology at NPP Dukovany as an example of good practice. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Efficient Sequential Attitude Estimation from Vector Observations

This paper presents a computationally efficient, sequential method for attitude matrix estimation using gyro and vector measurements. The method is based on a recently introduced, minimal-parameter third-order method for solving the orthogonal matrix differential equation in R(sup n). In the three-dimensional case, these third-order attitude parameters can be interpreted as temporal-integrals of the body-frame angular velocity components. A nonlinear algorithm is developed, which uses this minimal set of three parameters to estimate the nine-parameter direction-cosine matrix. Having an extremely simple kinematic equation, these parameters render the resulting estimator highly computationally efficient. An orthogonalization procedure, incorporated into the measurement processing stage, enhances the accuracy and stability of the resulting algorithm, yet retains reasonable simplicity. The performance of the estimator is demonstrated via a Monte Carlo simulation study.

Oshman, Yaakov↗