Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum Routing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Volatile fatty acid extraction from fermentation broth using a hydrophobic ionic liquid and in situ enzymatic esterification

Efficient recovery of volatile fatty acids (VFAs) from fermentation broth is a challenge due to low VFA titers and thus limits the commercialization of VFA production using biological routes. Liquid–liquid extraction using hydrophobic ionic liquids (ILs) shows great promise for the extraction and esterification of hydrophilic VFAs. In this study, several ILs were evaluated to select a water-immiscible and efficient extraction solvent. The selected IL, trihexyltetradecyl phosphonium dibutylphosphate ([P 666,14 ][DBP]), gave a cumulative VFA extraction of around 842.8 mg per g IL. The predicted excess enthalpy (H E ) and logarithmic activity coefficients ln(γ) using the COSMO-RS model were validated with the experimentally obtained VFA recovery from fermentation broth. To understand the extraction mechanism of VFAs, quantum theory of atoms in molecules (QTAIM) and noncovalent interaction (NCI) were performed. The results suggest that long chain fatty acids exhibit strong van der Waals interaction with the DBP anion leading to higher VFA extraction. The enzymatic esterification of VFAs with ethanol in [P 666,14 ][DBP] was optimized using the Box–Behnken response surface design of experiment. Under the optimized conditions, up to 83.7% of hexanoic acid was converted to ethyl esters, while other shorter chain VFAs have lower conversion efficiency (38.3–63.2%).

09 BIOMASS FUELS↗
DOE OSTI2025

Emission properties of a hybrid metallized diamond(001) photocathode

The spectral emission characteristics of a proof-of-concept hybrid metallized diamond(001) photocathode are presented. The quantum efficiency (QE) is shown to be determined by the photoinjection efficiency across the ohmic contact at the back metallized face, whereas the mean transverse energy (MTE) of the photoemitted electrons is consistent with an (optical)phonon-assisted and momentum-resonant Franck-Condon mechanism [Franck-Condon electron emission from polar semiconductor photocathodes, Phys. Rev. Appl. 23, 054065 (2025)] following electron drift transport to the untreated diamond(001) front emission face. Emission is observed from both the lower and upper conduction bands of diamond with positive and negative electron affinity, respectively. A potential route to the realization of a red-visible photocathode based on this concept with a sub-50 meV MTE and a QE greater than 0.1% is discussed.

Density of states↗
DOE OSTI2022

Inverse Faraday effect in Mott insulators

The inverse Faraday effect (IFE), where a static magnetization is induced by circularly polarized light, offers a promising route to ultrafast control of spin states. Here we study the IFE in Mott insulators using the Floquet theory. We find two distinct IFE behavior governed by the inversion symmetry. In the Mott insulators with inversion symmetry, we find that the effective magnetic field induced by the IFE couples ferromagnetically to the neighboring spins. While for the Mott insulators without inversion symmetry, the effective magnetic field due to IFE couples antiferromagnetically to the neighboring spins. We apply the theory to the spin-orbit coupled single- and multiorbital Hubbard model that is relevant for the Kitaev quantum spin liquid material and demonstrate that the magnetic interactions can be tuned by light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Dimensional Control of Octahedral Tilt in SrRuO 3 via Infinite-Layered Oxides

Manipulation of octahedral distortion at atomic scale is an effective means to tune the ground states of functional oxides. Previous work demonstrates that strain and film thickness are variable parameters to modify the octahedral parameters. However, selective control of bonding geometry by structural propagation from adjacent layers is rarely studied. Here we propose a new route to tune the ferromagnetism in SrRuO 3 (SRO) ultrathin layers by oxygen coordination of adjacent SrCuO 2 (SCO) layers. The infinite-layered CuO 2 exhibits a structural transformation from “planar-type” to “chain-type” with reduced film thickness. Two orientations dramatically modify the polyhedral connectivity at the interface, thus altering the octahedral distortion of SRO. The local structural variation changes the spin state of Ru and orbital hybridization strength, leading to a significant change in the magnetoresistance and anomalous Hall resistivity. Furthermore, these findings could launch investigations into adaptive control of functionalities in quantum oxide heterostructures using oxygen coordination.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Strong dependence of photoionization time delay on energy and angle in the neighborhood of Fano resonances

In this work, we uncover dramatic variations of the Wigner photoemission time delay with energy and angle in the vicinity of a Fano resonance with the time delay taking opposite signs at different angles at the same energy as well as at the opposite sides of the resonance at the same angle. These variations are illustrated by choosing the Ne 2s → 3p autoionizing state as a case study. Moreover, we demonstrate the existence of strikingly significant changes in time delay due to relativistic effects despite Ne being a low-Z atom. This finding shows the possibility for utilizing time delay chronoscopy as a route towards experimental probing of relativistic interactions and the phases of individual transition matrix elements upon atomic photoionization of low-Z atoms. Finally, we develop a practical parametrization to model and explain the angle and energy variation of the autoionizing resonance time delay in the nonrelativistic limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Strong Ferromagnetic Exchange Coupling and Single-Molecule Magnetism in MoS 4 3– -Bridged Dilanthanide Complexes

We report the synthesis and characterization of the trinuclear 4d-4f compounds [Co(C 5 Me 5 ) 2 ][(C 5 Me 5 ) 2 Ln(μ-S) 2 Mo(μ-S) 2 Ln(C 5 Me 5 ) 2 ], 1-Ln (Ln = Y, Gd, Tb, Dy), containing the highly polarizable MoS 4 3 - bridging unit. UV-Vis-NIR diffuse reflectance spectra and DFT calculations of 1-Ln reveal a low-energy metal-to-metal charge transfer transition assigned to charge transfer from the singly occupied 4d z 2 orbital of Mo V to the empty 5d orbitals of the lanthanides (4d in the case of 1-Y ), mediated by sulfur-based 3p orbitals. Electron paramagnetic resonance spectra collected for 1-Y in a tetrahydrofuran solution show large 89 Y hyperfine coupling constants of A ⊥ = 23 MHz and A || = 26 MHz, indicating the presence of significant yttrium-localized unpaired electron density. Magnetic susceptibility data support similar electron delocalization and ferromagnetic Ln-Mo exchange for 1-Gd , 1-Tb , and 1-Dy . This ferromagnetic exchange gives rise to an S = 15/2 ground state for 1-Gd and one of the largest magnetic exchange constants involving Gd III observed to date, with J Gd-Mo = +16.1(2) cm -1 . Additional characterization of 1-Tb and 1-Dy by ac magnetic susceptibility measurements reveals that both compounds exhibit slow magnetic relaxation. Although a Raman magnetic relaxation process is dominant for both 1-Tb and 1-Dy , an extracted thermal relaxation barrier of U eff = 68 cm -1 for 1-Dy is the largest yet reported for a complex containing a paramagnetic 4d metal center. Furthermore, these results provide a potentially generalizable route to enhanced n d-4f magnetic exchange, revealing opportunities for the design of new n d-4f single-molecule magnets and bulk magnetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Broadband sensitization of downconversion phosphor YPO{sub 4} by optimizing TiO{sub 2} substitution in host lattice co-doped with Pr{sup 3+}-Yb{sup 3+} ion-couple

This study demonstrates a feasible and efficient route to alleviate the absorption problem of the terrestrial solar spectrum and enhance broadband luminescence from a promising down conversion powder phosphor YPO{sub 4} co-doped with Pr{sup 3+}-Yb{sup 3+} lanthanide ion-couple: incorporating a third sensitizing transition metal ion, e.g., Ti{sup 4+}. The x-ray powder diffraction results confirm the lattice substitution by the solid-state reaction doping rather than the formation of any secondary phase. The emission spectral results and the luminescence decay curve analysis show that the downconversion luminescence can be enhanced by 200%–300% and the quantum efficiency enhanced by more than 20% at the wavelength of around 980 nm, the best response spectrum for Si-based solar cells, by optimizing TiO{sub 2} doping concentration at 7 mol. %.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Systematically improvable multiscale solver for correlated electron systems

The development of numerical methods capable of simulating realistic materials with strongly correlated electrons, with controllable errors, is a central challenge in quantum many-body physics. Here we describe a framework for a general multiscale method based on embedding a self-energy of a strongly correlated subsystem into a self-energy generated by a method able to treat large weakly correlated systems approximately. As an example, we present the embedding of an exact diagonalization self-energy into a self-energy generated from self-consistent second-order perturbation theory. Using a quantum impurity model, generated from a cluster dynamical mean field approximation to the two-dimensional Hubbard model, as a benchmark, we illustrate that our method allows us to obtain accurate results at a fraction of the cost of typical Monte Carlo calculations. We test the method in multiple regimes of interaction strengths and dopings of the model. Here, the general embedding framework we present avoids difficulties such as double counting corrections, frequency-dependent interactions, or vertex functions. As it is solely formulated at the level of the single-particle Green's function, it provides a promising route for the simulation of realistic materials that are currently difficult to study with other methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Large area CMOS active pixel sensor x-ray imager for digital breast tomosynthesis: Analysis, modeling, and characterization

Purpose: Large area x-ray imagers based on complementary metal-oxide-semiconductor (CMOS) active pixel sensor (APS) technology have been proposed for various medical imaging applications including digital breast tomosynthesis (DBT). The low electronic noise (50–300 e{sup −}) of CMOS APS x-ray imagers provides a possible route to shrink the pixel pitch to smaller than 75 μm for microcalcification detection and possible reduction of the DBT mean glandular dose (MGD). Methods: In this study, imaging performance of a large area (29 × 23 cm{sup 2}) CMOS APS x-ray imager [Dexela 2923 MAM (PerkinElmer, London)] with a pixel pitch of 75 μm was characterized and modeled. The authors developed a cascaded system model for CMOS APS x-ray imagers using both a broadband x-ray radiation and monochromatic synchrotron radiation. The experimental data including modulation transfer function, noise power spectrum, and detective quantum efficiency (DQE) were theoretically described using the proposed cascaded system model with satisfactory consistency to experimental results. Both high full well and low full well (LFW) modes of the Dexela 2923 MAM CMOS APS x-ray imager were characterized and modeled. The cascaded system analysis results were further used to extract the contrast-to-noise ratio (CNR) for microcalcifications with sizes of 165–400 μm at various MGDs. The impact of electronic noise on CNR was also evaluated. Results: The LFW mode shows better DQE at low air kerma (K{sub a} < 10 μGy) and should be used for DBT. At current DBT applications, air kerma (K{sub a} ∼ 10 μGy, broadband radiation of 28 kVp), DQE of more than 0.7 and ∼0.3 was achieved using the LFW mode at spatial frequency of 0.5 line pairs per millimeter (lp/mm) and Nyquist frequency ∼6.7 lp/mm, respectively. It is shown that microcalcifications of 165–400 μm in size can be resolved using a MGD range of 0.3–1 mGy, respectively. In comparison to a General Electric GEN2 prototype DBT system (at MGD of 2.5 mGy), an increased CNR (by ∼10) for microcalcifications was observed using the Dexela 2923 MAM CMOS APS x-ray imager at a lower MGD (2.0 mGy). Conclusions: The Dexela 2923 MAM CMOS APS x-ray imager is capable to achieve a high imaging performance at spatial frequencies up to 6.7 lp/mm. Microcalcifications of 165 μm are distinguishable based on reported data and their modeling results due to the small pixel pitch of 75 μm. At the same time, potential dose reduction is expected using the studied CMOS APS x-ray imager.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Reliable p K a Prediction through Efficient Incorporation of Anharmonicity within the Nuclear–Electronic Orbital Framework

Accurate pK a prediction is critical for understanding chemical reactivity and molecular properties across a wide range of applications. Computational approaches usually invoke a harmonic treatment of the vibrational modes for zero-point energies, as well as thermal and entropic contributions. Herein, we present a general protocol for relative pK a prediction that incorporates the significant anharmonic effects using nuclear–electronic orbital (NEO) theory. This protocol is validated against experimental data for a range of molecules in acetonitrile, including protonated nitrogen bases, nitrophenols, anilines, and diamines, as well as cobalt electrocatalysts. For simple acids, the NEO approach offers only a slight improvement over conventional density functional theory with the standard harmonic vibrational treatment, whereas for hydrogen-bonded acids, the NEO approach offers more significantly improved performance at a comparable computational cost. This accessible methodology provides a practical route for accurate pKa prediction in challenging systems and is extendable to related thermodynamic properties such as hydricities and proton-coupled redox potentials.

Density functional theory↗
DOE OSTI2014

Communication: The description of strong correlation within self-consistent Green's function second-order perturbation theory

We report an implementation of self-consistent Green's function many-body theory within a second-order approximation (GF2) for application with molecular systems. This is done by iterative solution of the Dyson equation expressed in matrix form in an atomic orbital basis, where the Green's function and self-energy are built on the imaginary frequency and imaginary time domain, respectively, and fast Fourier transform is used to efficiently transform these quantities as needed. We apply this method to several archetypical examples of strong correlation, such as a H{sub 32} finite lattice that displays a highly multireference electronic ground state even at equilibrium lattice spacing. In all cases, GF2 gives a physically meaningful description of the metal to insulator transition in these systems, without resorting to spin-symmetry breaking. Our results show that self-consistent Green's function many-body theory offers a viable route to describing strong correlations while remaining within a computationally tractable single-particle formalism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Chaos in an imperfectly premixed model combustor

This article reports nonlinear bifurcations observed in a laboratory scale, turbulent combustor operating under imperfectly premixed mode with global equivalence ratio as the control parameter. The results indicate that the dynamics of thermoacoustic instability correspond to quasi-periodic bifurcation to low-dimensional, deterministic chaos, a route that is common to a variety of dissipative nonlinear systems. The results support the recent identification of bifurcation scenarios in a laminar premixed flame combustor (Kabiraj et al., Chaos: Interdiscip. J. Nonlinear Sci. 22, 023129 (2012)) and extend the observation to a practically relevant combustor configuration.

42 ENGINEERING↗
DOE OSTI2025

Equation-of-motion internally contracted multireference unitary coupled-cluster theory

The accurate computation of excited states remains a challenge in electronic structure theory, especially for systems with a ground state that requires a multireference treatment. In this work, we introduce a novel equation-of-motion (EOM) extension of the internally contracted multireference unitary coupled-cluster framework (ic-MRUCC), termed EOM-ic-MRUCC. EOM-ic-MRUCC follows the transform-then-diagonalize approach, in analogy to its non-unitary counterpart. By employing a projective approach to optimize the ground state, the method retains additive separability and proper scaling with system size. We show that excitation energies are size-intensive if the EOM operator satisfies the “killer” and the projective conditions. Furthermore, we propose to represent changes in the reference state upon electron excitation via projected many-body operators that span the active orbitals and show that the EOM equations formulated in this way are invariant with respect to active orbital rotations. We test the EOM-ic-MRUCC method truncated to single and double excitations by computing the potential energy curves for several excited states of a BeH2 model system, the HF molecule, and water undergoing symmetric dissociation. Across these systems, our method delivers accurate excitation energies and potential energy curves within 5 mE h (∼0.14 eV) from full configuration interaction. Here, we find that truncating the Baker–Campbell–Hausdorff series to fourfold commutators contributes negligible errors (on the order of 10 −5 E h or less), offering a practical route to highly accurate excited-state calculations with reduced computational overhead.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Spin-orbit-splitting-driven nonlinear Hall effect in NbIrTe 4

The Berry curvature dipole (BCD) serves as a one of the fundamental contributors to emergence of the nonlinear Hall effect (NLHE). Despite intense interest due to its potential for new technologies reaching beyond the quantum efficiency limit, the interplay between BCD and NLHE has been barely understood yet in the absence of a systematic study on the electronic band structure. Here, we report NLHE realized in NbIrTe 4 that persists above room temperature coupled with a sign change in the Hall conductivity at 150 K. First-principles calculations combined with angle-resolved photoemission spectroscopy (ARPES) measurements show that BCD tuned by the partial occupancy of spin-orbit split bands via temperature is responsible for the temperature-dependent NLHE. Our findings highlight the correlation between BCD and the electronic band structure, providing a viable route to create and engineer the non-trivial Hall effect by tuning the geometric properties of quasiparticles in transition-metal chalcogen compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Quantum interferences among Dexter energy transfer pathways

Dexter energy transfer in chemical systems moves an exciton (i.e., an electron–hole pair) from a donor chromophore to an acceptor chromophore through a bridge by a combination of bonded and non-bonded interactions. The transition is enabled by both one-electron/one-particle and two-electron/two-particle interaction mechanisms. Assuming that there is no real intermediate state population of an electron, hole, or exciton in the bridge, the transport involves two states that are coupled non-adiabatically. As such, coherent quantum interferences arise among the Dexter energy coupling pathways. These interferences, while related to well understood interferences in single-electron transfer, are much richer because of their two particle nature: the transfer of a triplet exciton involves the net transfer of both an electron and a hole. Despite this additional complexity, simple rules can govern Dexter coupling pathway interferences in special cases. As in the case of single-electron transfer, identical parallel coupling pathways can be constructively interfering and may enhance the Dexter transfer rate. Because of the virtual particle combinatorics associated with two-particle superexchange, two parallel Dexter coupling routes may be expected to enhance Dexter couplings by more than a factor of two. Here we explore Dexter coupling pathway interferences in non-covalent assemblies, employing a method that enables the assessment of Dexter coupling pathway strengths and interferences, in the context of one-particle and two-particle coupling interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Nitrogenated Graphene Quantum Dot-Derived Copper Single-Atom Catalyst for Oxygen Reduction Reaction

Despite the promise of fuel cells as sustainable energy conversion technologies, their widespread adoption is hindered by the high cost of platinum group metal (PGM) catalysts, particularly for catalyzing the oxygen reduction reaction (ORR) at the cathode. Here, we report copper-based single-atom catalysts (Cu-SACs) as cost-effective non-PGM alternatives for ORR. The catalysts were synthesized via simple pyrolysis of pyrene-derived amine-terminated graphene quantum dots (GQDs) in the presence of nitrogen and metal precursors. The abundant nitrogen functionality in GQDs effectively stabilized isolated Cu atoms during their conversion to porous carbon. A subsequent acid-washing step yielded a high density of atomically dispersed Cu active sites. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and high-resolution scanning transmission electron microscopy (HR-STEM) confirmed the effective incorporation of isolated Cu atoms into the carbon matrix through copper–nitrogen (Cu-N) coordination. Electrochemical measurements revealed excellent ORR activity with a dominant four-electron pathway. This synthetic strategy provides a practical route to developing economically viable, non-precious metal catalysts.

catalysts↗
DOE OSTI2015

Polarization-dependent optics using gauge-field metamaterials

We show that effective gauge field for photons with polarization-split dispersion surfaces, being realized using uniaxial metamaterials, can be used for polarization control with unique opportunities. The metamaterials with the proposed gauge field correspond to a special choice of eigenpolarizations on the Poincaré sphere as pseudo-spins, in contrary to those from either conventional birefringent crystals or optical active media. It gives rise to all-angle polarization control and a generic route to manipulate photon trajectories or polarizations in the pseudo-spin domain. As demonstrations, we show beam splitting (birefringent polarizer), all-angle polarization control, unidirectional polarization filter, and interferometer as various polarization control devices in the pseudo-spin domain. We expect that more polarization-dependent devices can be designed under the same framework.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Anisometric C 60 Fullerene Colloids Assisted by Structure-Directing Agent

Colloidal synthesis and assembly provide low cost, large area routes to mesoscale structures. In particular, shape-anisotropic particles may form crystalline, plastic crystalline, complex liquid crystalline and glassy phases. Arrangements in each order class have been used to generate photonic materials. For example, large photonic band gaps have been found for photonic crystals, hyperuniform photonic glasses, and also for plastic crystals at sufficient refractive index contrast. The latter structures support highly isotropic bandgaps that are desirable for free-form waveguides and LED out-coupling. Photonic glasses with optical gain lead to self-tuned lasing by the superposition of multiply scattered light. Typically, extrinsic media such as organic dyes, rare earths, lanthanides and quantum dots are used to impart optical gain in photonic solids. The present work advances fullerene microcrystals as a new materials platform for ‘active’ light emitting in colloid-based photonic crystals. Fullerenes support singlet excited states that recombine to produce a characteristic red photoluminescence. C 60 also has a high refractive index (n ~ 2.2) and transparency (> 560 nm) 9 so that inverse structures are not required.

36 MATERIALS SCIENCE↗