Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Production Support”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Technoeconomic Analysis of Microwave-Assisted Dry Reforming Integrated with Chemical Looping for Production of Methanol

Methanol is a key component in producing formaldehyde, acetic acid, and methyl tert -butyl ether (MTBE) and supports a wide array of industries, including plastics, textiles, and automotive. It also plays a growing role in renewable energy solutions. However, the conventional production of methanol involves steam reforming of methane, which is very energy-intensive and produces significant quantities of the greenhouse gas carbon dioxide. In this research, a chemical looping scheme is combined with dry reforming of natural gas in a novel microwave reactor to produce an industrial quantity of methanol. A heat exchanger network is developed to substantially reduce hot and cold utility usage. The effect of the cost of purchasing carbon dioxide from an external source for dry reforming, the capital cost of the microwave reactor, and the cost of electricity on the net present value is analyzed. Technoeconomic comparison with the conventional industrial process that produces methanol via steam reforming of methane indicates that the chemical looping generates a significant positive net present value along with a substantial reduction in carbon dioxide emissions while producing methanol significantly below the U.S. Department of Energy’s goal of $800/ton.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Syntheses of gold supported on metal oxides and their application in organic transformations

Herein, we report a general and straightforward synthesis method for gold supported on mesoporous and microporous metal oxides. Supported materials, in general, show higher crystallinity compare to unsupported systems as verified through powder X-ray diffraction (XRD). Also, through XRD, most of the metal is observed to be in its oxide form, whereas the gold support was found to be in its metallic state, which has been further confirmed from TEM. In terms of surface area, the catalyst was not found to follow any trend. Morphology wise, there are no changes observed after doping except in few cases. Combined results from XRD, X-ray fluorescence spectroscopy, Auger, and X-ray photoelectron spectroscopy suggest that gold is mainly in the bulk and very little (0.04% in case of gold doped calcium oxide) or non (in case of gold doped mixed manganese-cerium oxide) on the surface. The presence of Au (0) 4f peaks in XPS further confirms the metallic state of the gold. Oxides of indium, magnesium and calcium have been studied for the organic transformation reactions. An enhancement in activity and product selectivity was observed in the case of the gold supported catalysts. Indium serves as a great catalyst for C–C coupling and electrophilic aromatic substitution reactions and gives >99% conversion. Interestingly, 88% selectivity for C–C coupling and >99% selectivity for aromatic substitution have been achieved at 100 °C and room temperature respectively. Magnesium and calcium give Knoevenagel condensation products. At room temperature with very low catalyst loading, >99% conversion and selectivity were observed for the Knoevenagel reaction with as high as 35.30 TOF. Finally, a mechanism for the C–C coupling reaction has been proposed based on these results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Uncertainty Analysis of Consequence Management Data Products

An interlaboratory effort has developed a probabilistic framework to characterize uncertainty in data products that are developed by the US Department of Energy Consequence Management Program in support of the Federal Radiological Monitoring and Assessment Center. The purpose of this paper is to provide an overview of the probability distributions of input variables and the statistical methods used to propagate and quantify the overall uncertainty of the derived response levels that are used as contours on data products due to the uncertainty in input parameters. Uncertainty analysis results are also presented for several study scenarios. This paper includes an example data product to illustrate the potential real-world implications of incorporating uncertainty analysis results into data products that inform protective action decisions. Data product contours that indicate areas where public protection actions may be warranted can be customized to an acceptable level of uncertainty. Finally, the investigators seek feedback from decision makers and the radiological emergency response community to determine how uncertainty information can be used to support the protective action decision-making process and how it can be presented on data products.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

Vacuum Pyrolysis of Hybrid Poplar Milled Wood Lignin with Fourier Transform-Ion Cyclotron Resonance Mass Spectrometry Analysis of Feedstock and Products for the Elucidation of Reaction Mechanisms

The pyrolysis of lignocellulosic materials is a promising technique to produce fuels and chemicals. It is well known that the most abundant products of lignin pyrolysis are oligomeric molecules, known as pyrolytic lignin (PL). The chemical composition of PL has been extensively studied; however, there is still an important debate whether these oligomers are produced directly from the lignin or from the recombination of monomeric pyrolytic products. Existing theories are unable to describe the effect of vacuum on the distribution of pyrolysis products. Hybrid poplar milled wood lignin (MWL) was initially isolated and thoroughly characterized by Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS). Chemical formulas were assigned to each oligomeric compound detected. The MWL was also subjected to vacuum pyrolysis in a modified pyroprobe at 250, 750, and 1000 mbar (absolute pressure), and the resulting liquid products were analyzed by FT-ICR MS. A new strategy to assign structural representations to the oligomeric PL products is proposed, based on the plausible pyrolysis reaction mechanisms of depolymerization/fragmentation applied to original MWL oligomer formulas. Our results support the hypothesis that PL is formed from the removal of moieties from primary lignin pyrolysis products with between three and five aromatic rings. This depolymerization/fragmentation allows the oligomers to reduce their molecular weights to the point where they can be removed from the reaction zone by direct vaporization. Furthermore, this phenomenon highlights the importance of pressure on removal mechanisms and their impact on the molecular weight of the resulting products from lignin pyrolysis.

09 BIOMASS FUELS↗
DOE OSTI2022

Model‐Based Approach to Selecting Pegfilgrastim Dose for Pharmacokinetic and Pharmacodynamic Similarity Studies in Biosimilar Development

This study applied modeling and simulation (M&S) approaches to evaluate the sensitivity of pegfilgrastim pharmacokinetics (PKs) and pharmacodynamics (PDs) to changes in dose amount, and linear or nonlinear clearance (CL) over pegfilgrastim subcutaneous dose of 2–6 mg. A previously published model was adapted to better describe pegfilgrastim PK and PD data in healthy subjects and used in simulation. Nonlinear CL accounts for 98% and 77%, respectively, of the total CL of pegfilgrastim at 2 and 6 mg. The sensitivity analyses showed: (i) PK of 2 and 6 mg doses are similarly sensitive to detect differences for a 5% change in dose; (ii) PK of 2 mg dose is more sensitive to changes in receptor binding affinity, a model parameter for nonlinear CL, and a product quality attribute characterized with orthogonal methods as part of demonstrating analytical similarity between products; (iii) PK of approved 6 mg dose is more sensitive to changes in linear CL, which has not been associated with any specific product quality attributes, and (iv) the PDs are not sensitive to changes in linear or nonlinear CL. Taken together, our analyses support that the approved pegfilgrastim dose of 6 mg is appropriate for detecting differences between a biosimilar and the reference products in pegfilgrastim PK and PD similarity studies. The described M&S approaches can be adopted to support dose selection for biosimilars with nonlinear PK and complex PK–PD interplay.

Pharmacology & Pharmacy↗
DOE OSTI2025

Modelling the Effects of Wetland Restoration on Coastal Hydrology: A Case Study of Elkhorn Slough Watershed, California

ABSTRACT Coastal wetlands, some of the most productive ecosystems on Earth, provide critical ecosystem services, including support of biodiversity, carbon sequestration and flood protection. In recent decades, these ecosystems have experienced extensive coastal wetland loss. Coastal wetland restoration provides a beacon of hope, offering a chance to reclaim these important habitats. However, even with billions of dollars invested worldwide in restoring coastal wetlands, we still lack comprehensive knowledge about the effectiveness of these restoration efforts in recovering wetland ecosystem functions and how future climate change may affect these efforts. The ability to evaluate how these ecosystems will function in the future is vital for examining current investments and developing future protection and management plans. We selected Elkhorn Slough, a tidal estuary, in California, to investigate the impact of wetland restoration and sea level rise (SLR) on coastal hydrology using the process‐based coastal hydrologic model, Advanced Terrestrial Simulator (ATS), informed by site‐specific data. We designed a novel modelling workflow for incorporating wetland restoration features into land cover and soil properties for the model parameterization. The validation results demonstrate a strong agreement between modelled and observed data. We studied the characteristics of coastal watershed hydrology, then focused on the surface water dynamics at two wetland sites within Elkhorn Slough, a reference site and a restored site. Our simulation results indicate that the restored site successfully maintains surface elevation, resulting in reduced surface inundation. We also examined the impact of wetland restoration under expected SLR over the next few decades. The low‐lying Yampah Marsh, the reference site, is likely to be inundated due to future SLR when highest tides arrive, while a higher percentage of Hester Marsh, the restored site, would retain marsh vegetation in coming decades, regardless of tidal conditions. Our study provides important information for examining the outcome of restoration practices that include surface elevation in tidal wetlands under climate changes.

advanced terrestrial simulator↗
DOE OSTI2024

A structural equation modeling approach to leveraging the power of extant sentiment analysis tools

Machine-derived sentiment analysis has become a pervasive and useful tool to address a wide array of issues in natural language processing. Leading technology companies such as Google now provide sentiment analysis tools (SATs) as readily accessible online products. Academic researchers develop and make available SATs to support the research enterprise. One of the major challenges with SATs is the inconsistencies in results among the various SATs. Consequently, the selection of a SAT for a specific purpose may significantly impact the application. This study addresses the foregoing problem by utilizing structural equation modeling to merge the outputs of SATs to develop a combined sentiment metric without the need for a labeled training dataset. This method is applicable to a wide range of text-based problems, is data-driven, and replicable. It was tested using three publicly available datasets and compared against seven different SATs. The results indicate that as a continous measure, the proposed method outperformed other SATs in the movie reviews and SemEval datasets, and achieved a tie for first place with IBM Watson on the Sentiment 140 dataset. Also, compared to the published major alternatives, the arithmetic mean solution, this approach performed better across these three datasets.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Insights into Nonelectroactive C–C Bond Formation on Cu(100) during Electrochemical CO 2 Reduction from Multiconfigurational Wavefunction Theory

Carbon–carbon (C–C) bond formation is necessary for hydrocarbon (and oxygenate) synthesis beyond methane (and formate/formic acid) during electrochemical CO and CO 2 reduction (ECOR and ECO 2 R). Cu has notable ability to form hydrocarbons compared to other pure metals. In particular, the (100) facet of face-centered cubic Cu forms ethylene competitively with H 2 and methane during both ECOR and ECO 2 R. Past simulations based on density functional theory (DFT) with standard exchange-correlation functional approximations predict fast nonelectroactive C–C bond formation channels involving adsorbed (*) CO together with another *CO, formyl (*CHO), or hydroxymethylidyne (*COH), forming OC*–*CO, OC*–CHO*, and OC*–*COH, respectively. Such simulations support the prevailing hypothesis that emergence of C 2 products is kinetically determined at the early stages of the reduction chemistry. Here we show, via simulations with more accurate many-body, i.e., “correlated”, wavefunction theory (enabled by an embedding scheme), that the coupling of *CO with a *CO or a *COH (previously predicted at the same level of theory to kinetically dominate over *CHO as the one-electron reduction product of *CO) is highly activated (kinetically impeded), with free energy barriers >1 eV, in contradiction to previous DFT-based simulations. Intriguingly, we find that the coupling of two adjacent *COHs incurs only a small barrier (<0.3 eV) and is exoergic (< –1 eV); however, given the predicted low surface mobility of *COH, the emergence of HOC*–*COH is also improbable, at least at low *COH coverages. We therefore conclude that it is highly unlikely for *CO to participate in nonelectroactive C–C bond formation on pristine Cu(100), contrary to conventional wisdom, and that the energetically favorable *COH dimerization may occur only after substantial buildup of *COH on the surface.

adsorption↗
DOE OSTI2024

Mechanocatalytic Hydrogenolysis of the Lignin Model Dimer Benzyl Phenyl Ether over Supported Palladium Catalysts

This work demonstrates the mechanocatalytic hydrogenolysis of the ether bond in the lignin model compound benzyl phenyl ether (BPE) and hardwood lignin isolated by hydrolysis with supercritical water. Pd catalysts with 4 wt % loading on Al 2 O 3 and SiO 2 supports achieve 100% conversion of BPE with a toluene production rate of (2.6–2.9) × 10 –5 mol·min –1 . The formation of palladium hydrides under H 2 gas flow contributes to an increase in the turnover frequency by a factor of up to 300 compared to Ni on silica–alumina. While a near-quantitative toluene yield is obtained, some of the phenolic products remain adsorbed on the catalyst.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Developing an Undergraduate Research Laboratory for Experimental Physical Chemistry [Book Chapter]

Embarking on a faculty career in physical chemistry at a primarily undergraduate institution (PUI) is exciting, but also overwhelming. Becoming both an effective teacher and a productive researcher requires a good plan, hard work and support from others who understand what it takes to be successful. The phrase, “building a laboratory,” calls to mind the physical construction of a research instrument, but beginning a career at a PUI involves much more than assembling equipment. Funding for the lab must be secured, students must be recruited and mentored, and the lab must be overseen to keep things running on a daily basis. While many of these tasks would also be part of starting a career at a doctoral level institution, there are many special considerations that must be taken into account when working with undergraduate students because their laboratory experience and chemical knowledge are still within those beautiful but nascent stages. Here, this unique aspect makes building a research program challenging, but also very rewarding. Exposing young minds to the wonders of physical chemistry and building personal relationships through the mentoring process can be immensely gratifying. This chapter is a compilation of holistic advice for building an experimental physical chemistry research laboratory for undergraduates, reflecting a typical experience found in the United States.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

How Might the May 2015 Flood in the U.S. Southern Great Plains Induced by Clustered MCSs Unfold in the Future?

Abstract The historic 22–26 May 2015 flood event in Texas and Oklahoma was caused by anomalous clustered mesoscale convective systems (MCSs) that produced record‐breaking rainfall and $3 billion of damage in the region. A month‐long regional convection‐permitting simulation is conducted to reconstruct multiple clustered MCSs that lead to this flood event. We further use the pseudo global warming approach to examine how a similar event may unfold in a warmer climate and the driving physical factors for the changes. Tracking of MCSs in observations and simulations shows that the historical simulation reproduces the salient characteristics of the observed MCSs. In a warmer climate under a high‐emission (SSP5‐8.5) scenario, the Southern Great Plains is projected to experience a near surface warming of 4–6 K, accompanied by enhanced moisture transport by the strengthened Great Plains low‐level jet. A warmer and moister lower troposphere leads to 36%–59% larger convective available potential energy, supporting wider and more intense convective updrafts and rainfall production. Consistently, MCSs have wider convective areas and stronger rainfall intensities, producing 50% larger rain volumes during the mature stage. Extreme (99.5%) MCS rainfall frequency and amount will increase by threefold. However, MCS stratiform rain area decreases as a result of elevated stratiform cloud bases that lead to stronger sublimation and evaporation of precipitation in response to warming, resulting in reduced weak‐to‐moderate surface precipitation. Results suggest that global warming greatly increases precipitation intensity of clustered MCS events under strong synoptic influence, with much higher potential to produce serious floods without additional climate adaptation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Broadband unidirectional visible imaging using wafer-scale nano-fabrication of multi-layer diffractive optical processors

We present a broadband and polarization-insensitive unidirectional imager that operates at the visible part of the spectrum, where image formation occurs in one direction, while in the opposite direction, it is blocked. This approach is enabled by deep learning-driven diffractive optical design with wafer-scale nano-fabrication using high-purity fused silica to ensure optical transparency and thermal stability. Our design achieves unidirectional imaging across three visible wavelengths (covering red, green, and blue parts of the spectrum), and we experimentally validated this broadband unidirectional imager by creating high-fidelity images in the forward direction and generating weak, distorted output patterns in the backward direction, in alignment with our numerical simulations. This work demonstrates wafer-scale production of diffractive optical processors, featuring 16 levels of nanoscale phase features distributed across two axially aligned diffractive layers for visible unidirectional imaging. This approach facilitates mass-scale production of ~0.5 billion nanoscale phase features per wafer, supporting high-throughput manufacturing of hundreds to thousands of multi-layer diffractive processors suitable for large apertures and parallel processing of multiple tasks. Beyond broadband unidirectional imaging in the visible spectrum, this study establishes a pathway for artificial-intelligence-enabled diffractive optics with versatile applications, signaling a new era in optical device functionality with industrial-level, massively scalable fabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Block2 : A comprehensive open source framework to develop and apply state-of-the-art DMRG algorithms in electronic structure and beyond

block2 is an open source framework to implement and perform density matrix renormalization group and matrix product state algorithms. Out-of-the-box it supports the eigenstate, time-dependent, response, and finite-temperature algorithms. In addition, it carries special optimizations for ab initio electronic structure Hamiltonians and implements many quantum chemistry extensions to the density matrix renormalization group, such as dynamical correlation theories. The code is designed with an emphasis on flexibility, extensibility, and efficiency and to support integration with external numerical packages. Here, we explain the design principles and currently supported features and present numerical examples in a range of applications.

Chemistry↗
DOE OSTI2025

Conformation-specific synthetic intrabodies modulate mTOR signaling with subcellular spatial resolution

Subcellular compartmentalization is integral to the spatial regulation of mechanistic target of rapamycin (mTOR) signaling. However, the biological outputs associated with location-specific mTOR signaling events are poorly understood and challenging to decouple. Here, we engineered synthetic intracellular antibodies (intrabodies) that are capable of modulating mTOR signaling with genetically programmable spatial resolution. Epitope-directed phage display was exploited to generate high affinity synthetic antibody fragments (Fabs) against the FKBP12–Rapamycin binding site of mTOR (mTOR FRB ). We determined high-resolution crystal structures of two unique Fabs that discriminate distinct conformational states of mTOR FRB through recognition of its substrate recruitment interface. By leveraging these conformation-specific binders as intracellular probes, we uncovered the structural basis for an allosteric mechanism governing mTOR complex 1 (mTORC1) stability mediated by subtle structural adjustments within mTOR FRB . Furthermore, our results demonstrated that synthetic binders emulate natural substrates by employing divergent yet complementary hydrophobic residues at defined positions, underscoring the broad molecular recognition capability of mTOR FRB . Intracellular signaling studies showed differential time-dependent inhibition of S6 kinase 1 and Akt phosphorylation by genetically encoded intrabodies, thus supporting a mechanism of inhibition analogous to the natural product rapamycin. Finally, we implemented a feasible approach to selectively modulate mTOR signaling in the nucleus through spatially programmed intrabody expression. These findings establish intrabodies as versatile tools for dissecting the conformational regulation of mTORC1 and should be useful to explore how location-specific mTOR signaling influences disease progression.

Science & Technology - Other Topics↗
DOE OSTI2021

Eco-evolutionary optimality as a means to improve vegetation and land-surface models

Global vegetation and land-surface models embody interdisciplinary scientific understanding of the behaviour of plants and ecosystems, and are indispensable to project the impacts of environmental change on vegetation and the interactions between vegetation and climate. Furthermore, systematic errors and persistently large differences among carbon and water cycle projections by different models highlight the limitations of current process formulations. In this review, focusing on core plant functions in the terrestrial carbon and water cycles, we show how unifying hypotheses derived from eco-evolutionary optimality (EEO) principles can provide novel, parameter-sparse representations of plant and vegetation processes. We present case studies that demonstrate how EEO generates parsimonious representations of core, leaf-level processes that are individually testable and supported by evidence. EEO approaches to photosynthesis and primary production, dark respiration and stomatal behaviour are ripe for implementation in global models. EEO approaches to other important traits, including the leaf economics spectrum and applications of EEO at the community level are active research areas. Independently tested modules emerging from EEO studies could profitably be integrated into modelling frameworks that account for the multiple time scales on which plants and plant communities adjust to environmental change.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

A novel Shiga toxin 2a neutralizing antibody therapeutic with low immunogenicity and high efficacy

ABSTRACT Shiga toxin-producingEscherichia coliinfections are difficult to treat due to the risk of antibiotic-induced stress upregulating the production of toxins, medical treatment is consequently limited to supportive care to prevent the development of hemolytic uremic syndrome (HUS). Here, we introduce a potentially therapeutic humanized mouse monoclonal antibody (Hu-mAb 2-5) targeting Stx2a, the most common Shiga toxin subtype identified from outbreaks. We demonstrate that Hu-mAb 2-5 has low immunogenicity in healthy adultsex vivoand high neutralizing efficacyin vivo, protecting mice from mortality and HUS-related tissue damage.

Microbiology↗
DOE OSTI2021

Co‑cultivation of the anaerobic fungus Caecomyces churrovis with Methanobacterium bryantii enhances transcription of carbohydrate binding modules, dockerins, and pyruvate formate lyases on specific substrates

Abstract Anaerobic fungi and methanogenic archaea are two classes of microorganisms found in the rumen microbiome that metabolically interact during lignocellulose breakdown. Here, stable synthetic co-cultures of the anaerobic fungus Caecomyces churrovis and the methanogen Methanobacterium bryantii (not native to the rumen) were formed, demonstrating that microbes from different environments can be paired based on metabolic ties. Transcriptional and metabolic changes induced by methanogen co-culture were evaluated in C. churrovis across a variety of substrates to identify mechanisms that impact biomass breakdown and sugar uptake. A high-quality genome of C. churrovis was obtained and annotated, which is the first sequenced genome of a non-rhizoid-forming anaerobic fungus. C. churrovis possess an abundance of CAZymes and carbohydrate binding modules and, in agreement with previous studies of early-diverging fungal lineages, N6-methyldeoxyadenine (6mA) was associated with transcriptionally active genes. Co-culture with the methanogen increased overall transcription of CAZymes, carbohydrate binding modules, and dockerin domains in co-cultures grown on both lignocellulose and cellulose and caused upregulation of genes coding associated enzymatic machinery including carbohydrate binding modules in family 18 and dockerin domains across multiple growth substrates relative to C. churrovis monoculture. Two other fungal strains grown on a reed canary grass substrate in co-culture with the same methanogen also exhibited high log2-fold change values for upregulation of genes encoding carbohydrate binding modules in families 1 and 18. Transcriptional upregulation indicated that co-culture of the C. churrovis strain with a methanogen may enhance pyruvate formate lyase (PFL) function for growth on xylan and fructose and production of bottleneck enzymes in sugar utilization pathways, further supporting the hypothesis that co-culture with a methanogen may enhance certain fungal metabolic functions. Upregulation of CBM18 may play a role in fungal–methanogen physical associations and fungal cell wall development and remodeling.

09 BIOMASS FUELS↗
DOE OSTI2021

Integrated Landscape Management to Reduce Biomass Feedstock Access Costs

Using geospatial, machine learning, and optimization techniques, a field scoring and design framework known as the bioenergy Landscape Environmental Assessment and Design System (bioLEADS) was developed and used to show through modelling that it is possible to reduce biomass feedstock access costs, improve field revenue, and shift intensive row crop production away from subfield areas susceptible to erosion and low in soil organic carbon. The purpose of bioLEADS is to automate agricultural field selection and subfield allocation to perennial energy crop production while incorporating reduced biomass feedstock access costs to support attaining the U.S. Department of Energy (DOE) Bioenergy Technologies Office (BETO) cost targets.

09 BIOMASS FUELS↗