SEARCH · Engineering Papers

Results for “Precipitation Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Analysis of air mass trajectories to explain observed variability of tritium in precipitation at the Southern Sierra Critical Zone Observatory, California, USA

Understanding the behavior of tritium, a radioactive isotope of hydrogen, in the environment is important to evaluate the exposure risk of anthropogenic releases, and for its application as a tracer in hydrology and oceanography. To understand and predict the variability of tritium in precipitation, HYSPLIT air mass trajectories were analyzed for 16 aggregate precipitation samples collected over a 2 year period at irregular intervals at a research site located at 2000 m elevation in the southern Sierra Nevada (California, USA). Attributing the variation in tritium to specific source areas confirms the hypothesis that higher latitude or inland sources bring higher tritium levels in precipitation than precipitation originating in the lower latitude Pacific Ocean. In this case, the source of precipitation accounts for 79% of the variation observed in tritium concentrations. In conclusion, air mass trajectory analysis is a promising tool to improve the predictions of tritium in precipitation at unmonitored locations and thoroughly understand the processes controlling transport of tritium in the environment.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Multiple Metrics Informed Projections of Future Precipitation in China

Predicting how regional precipitation will respond to future warming is among the most challenging undertaking in climate change projection. Despite sustained efforts to improve modeling and understanding of precipitation, the overall uncertainty in projecting regional precipitation has not been reduced substantially. In this work, the potential for more robust precipitation projections is demonstrated through the use of discriminating metrics to subsample the multimodel ensemble. Using a two-dimensional metric of precipitation and its relationship with large-scale circulation indices in East Asia, 31 models in the Coupled Model Intercomparison Project Phase 5 (CMIP5) are classified into three groups. Models in the top performing group projected statistically significant increasing trends in precipitation and the regional precipitation patterns are more similar to each other than to the patterns in the bottom performing group. In contrast, models in the bottom performing group projected diverse responses, with overall small drying or no significant trends in precipitation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2012

Microstructure-Property Relationship in the Thermomechanically Processed C-Mn-Si-Nb-Al-(Mo) TRIP Steels before and after PS/BH Treatment

The effect of prestraining and bake hardening (PS/BH) on the development of microstructures and mechanical properties in thermomechanically processed transformation-induced plasticity (TRIP) steels with additions of Nb, Mo, and Al was studied by atom probe tomography (APT) and transmission electron microscopy (TEM). An increase in number density and sizes of clusters and nanoscale precipitates was observed in both steels but was more significant in the Nb-Al-Mo steel than in the Nb-Al steel. This increase could be explained by the possible fast diffusion of Nb and Mo atoms at low temperatures, as was observed for surface diffusivity. The contributions of cluster strengthening and precipitation strengthening to the yield strength increment after PS/BH were estimated.

36 MATERIALS SCIENCE↗

DOE OSTI2016

Characterization of yttrium-rich precipitates in a titanium alloy weld

The yttrium-rich (Y-rich) precipitates that form in the fusion zone (FZ) of a Ti–5Al–1Sn–1Zr–1V–0.8Mo (wt.%) alloy, or Ti-5111, gas-tungsten arc welds (GTAW) were characterized. The filler metal was modified by a small concentration of Y in order to refine the microstructure and thus improve the FZ ductility. A high number density of nanoscale Y-rich precipitates were characterized in the weld FZ by atom probe tomography (APT) and scanning transmission electron microscopy (STEM). - Highlights: •A high number density of nanoscale precipitates were observed in the FZ matrix. •The nanoscale precipitates are enriched in yttrium. •Oxygen and sulfur are also present in the Y-rich precipitates and their interfaces.

36 MATERIALS SCIENCE↗

NASA NTRSDate not supplied

Harmonizing Multi-Disciplinary Data for Applied Research: A Comprehensive Analysis of GES DISC Datasets through NLP and TF-IDF Techniques

Data centers distribute data encompassing multiple disciplines, making it necessary to evaluate dataset applicability to applied research. Typically, these datasets are generated by specialized science teams and consist of single-discipline data, such as atmospheric temperature, pressure, and precipitation, leading to unique dataset formats and access services. However, in applied research, the utilization of datasets from multiple disciplines is commonly necessary. The increasing availability of research literature citing Earth Science datasets presents an opportunity to analyze the usage of datasets in multi-disciplinary research. This study proposes a novel approach wherein research publications citing datasets archived at the GES DISC (Goddard Earth Sciences Data and Information Services Center) are collected, and each publication is associated with specific research topics through the application of Natural Language Processing (NLP), using the Term Frequency Inverse Document Frequency (TF-IDF) technique on the publication titles and abstracts. Through this analysis, we gain insights into the distribution of dataset disciplines as they are being used in various applied research areas. This knowledge is essential for the development of dataset tools and services tailored to effectively support applied research studies, as it enhances a data center's comprehension of how datasets from multiple disciplines are integrated into research endeavors.

Infometrics↗

DOE OSTI2018

Inter-Annual Precipitation Variability Decreases Switchgrass Productivity from Arid to Mesic Environments

Cellulosic biofuels are an important source of renewable biomass within the alternative energy portfolio. Switchgrass (Panicum virgatum L.), a perennial C 4 grass native to North America, is widely studied as a biofuel feedstock for its consistently high yields and minimal input requirements. The influences of precipitation amount and temporal variability on the fertilizer response of switchgrass productivity are not fully understood. Moreover, global climate models predict changes in rainfall patterns towards lower and increasingly variable soil water availability in several productive areas worldwide, which may impact net primary production of biofuel crops. We conducted a meta-analysis of aboveground net primary production of switchgrass from 48 publications encompassing 82 different locations, 11 soil types, 52 switchgrass cultivars, fertilizer inputs between 0 to 896 kg N ha –1 year –1 , and 1 to 6 years of annual productivity measures repeated on the same stand. Productivity of the lowland ecotype doubled with N rates > 131 kg N ha –1 year –1 , but upland ecotype productivity increased only by 50%. Results showed an optimum N rate of 30 to 60 kg N ha –1 year –1 for both ecotypes, after which biomass gain per unit of N added decreased. Growing season precipitation (GSPPT) and inter-annual precipitation variability (inter-PPTvar) affected both ecotypes similarly. Long-term mean annual precipitation (MAP) differentially affected lowland and upland productivity, depending on the N level. Productivity responses to MAP and GSPPT were similar for both upland and lowland ecotypes at none or low N rates. When N increased beyond 60 kg N ha –1 year –1 , lowland cultivars had a greater growth response to MAP than uplands. Productivity increased with increasing GSPPT and MAP and had a positive linear response to MAP ranging from 600 to 1200 mm year –1 . One third of the variability in switchgrass production was accounted for by inter-PPTvar. After accounting for MAP, sites with higher inter-PPTvar had lower switchgrass productivity than sites with lower inter-PPTvar. Increased inter-annual variation in precipitation reduced production of both ecotypes. As a result, predicted changes in the amount and timing of precipitation thus likely will exert greater influence on production of upland than lowland ecotypes of switchgrass.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2014

The negative effect of Zr addition on the high temperature strength in alumina-forming austenitic stainless steels

The effect of a Zr addition on the precipitation behavior and mechanical properties in Nb-containing alumina-forming austenitic (AFA) stainless steels was investigated using tensile tests, scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM) analysis. The TEM observation showed that a Zr addition led to the formation of a (Nb,Zr)(C,N) complex particle, which coarsened the Nb-rich carbonitride. Tensile tests were performed at an elevated temperature (700 °C), and both the tensile and yield strengths decreased with a Zr addition. This unexpected result of a Zr addition was due to the reduction of the precipitation strengthening by particle coarsening. - Highlights: • The effect of Zr on high temperature strength in AFA steel containing Nb was studied. • Both the tensile and yield strengths of an AFA steel decreased with Zr-addition. • This is due to the reduction of precipitation strengthening by particle coarsening. • Nb(C,N) and (Nb,Zr)(C,N) particles were precipitated in an AFA and Zr-added AFA steel. • The size of (Nb,Zr)(C,N) particle is much bigger than that of Nb(C,N) particle.

36 MATERIALS SCIENCE↗

DOE OSTI2012

Structure and Stability of Hexa-Aqua V(III) Cations in Vanadium Redox Flow Battery Electrolytes

The Vanadium (III) cation structure in mixed acid based electrolyte solution from vanadium redox flow batteries were studied by 17O and 35/37Cl Nuclear Magnetic Resonance (NMR) spectroscopy, electronic spectroscopy and density functional theory (DFT) based computational modeling. Both computational and experimental results reveals that the V(III) species can complex with counter anions (sulfate/chlorine) 10 depend on the composition of its solvation sphere. By analyzing the powder precipitate it was found that the formation of sulfate complexed V(III) species is the crucial process in the precipitation reaction. The precipitation occurs through nucleation of neutral species formed through deprotonation and ion-pair formation process. However, the powder precipitate shows a multiphase nature which warrants multiple reaction pathways for precipitation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2017

An in situ USAXS–SAXS–WAXS study of precipitate size distribution evolution in a model Ni-based alloy

Intermetallic γ' precipitates typically strengthen nickel-based superalloys. The shape, size and spatial distribution of strengthening precipitates critically influence alloy strength, while their temporal evolution characteristics determine the high-temperature alloy stability. Combined ultra-small-, small- and wide-angle X-ray scattering (USAXS–SAXS–WAXS) analysis can be used to evaluate the temporal evolution of an alloy's precipitate size distribution (PSD) and phase structure during in situ heat treatment. Analysis of PSDs from USAXS–SAXS data employs either least-squares fitting of a preordained PSD model or a maximum entropy (MaxEnt) approach, the latter avoiding a priori definition of a functional form of the PSD. However, strong low- q scattering from grain boundaries and/or structure factor effects inhibit MaxEnt analysis of typical alloys. Lastly, this work describes the extension of Bayesian–MaxEnt analysis methods to data exhibiting structure factor effects and low- q power law slopes and demonstrates their use in an in situ study of precipitate size evolution during heat treatment of a model Ni–Al–Si alloy.

36 MATERIALS SCIENCE↗

DOE OSTI2016

Characterizing precipitate evolution of an Al–Zn–Mg–Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring

In situ electrical resistivity monitoring technique was employed to continuously evaluate the precipitate evolution of an Al–Zn–Mg–Cu-based commercial alloy during typical artificial aging treatments. The effects of artificial aging on the precipitates stability during non-isothermal heat treatments were also explored. Conventional hardness test, transmission electron microscopy and differential scanning calorimetry were also adopted to verify the electrical resistivity results. The results indicated that both the precipitation process and its timely rate could be followed by the monitored electrical resistivity during artificial aging treatments. The electrical resistivity results gave overall information on continuous precipitation and dissolution processes, especially under high heating rates. Samples artificial aging heat treated at 120 °C for 24 h followed by aging at 150 °C for 24 h presented more stable state and coarser precipitates than the samples only artificial aging heat treated at 120 °C for 24 h or triple artificial aging heat treated at 120 °C/24 h + 195 °C/15 min + 120 °/24 h. While the incoherent η precipitates in the samples artificial aging heat treated at 120 °C for 24 h followed by aging at 150 °C for 24 h were more easiness to coarsening and dissolve during non-isothermal heat treatments as well. - Highlights: • In situ electrical resistivity monitoring technique was employed on an Al-Zn-Mg-Cu alloy. • The precipitate evolution during typical artificial aging treatments was studied. • The precipitate stability during non-isothermal heat treatments was explored. • The electrical resistivity wonderfully monitored continuous precipitation and dissolution. • The alloy submitted to a T7 treatment presents a more stable state during heating due to incoherent η precipitates.

36 MATERIALS SCIENCE↗

NASA NTRS2021

Chapter 10: Development of a Precipitation Retrieval Scheme for Cross-track Passive Microwave Sounding Instruments

The measurement of precipitation (snowfall and rainfall) across the globe is of great importance to both science and society. Despite the importance, measurements from surface-based instruments are limited in extent and are generally absent from sparsely populated or inhospitable regions, including over the world’s oceans. Satellite-based observations have the potential to provide the necessary information to generate estimates of precipitation across the whole of the Earth’s surface. However, adequate temporal and spatial sampling is required to capture vagaries of precipitation and it is necessary to exploit all possible satellite (and, where appropriate surface) information. While much research has been carried out into the retrieval of precipitation from observations gathered by conically-scanning passive microwave imagers in previous decades, relatively little has been done to fully utilise the observations from the cross-track scanning passive microwave sounding instruments. This paper will review a number of cross-track precipitation retrieval schemes, together an evaluation of their performance, and future directions.

Precipitation retrievals↗

DOE OSTI2012

Effect of solution annealing temperature on precipitation in 2205 duplex stainless steel

In the present study, effect of solution annealing temperature (1050 Degree-Sign C and 1100 Degree-Sign C) and isothermal ageing (700 Degree-Sign C: 15 min to 6 h) on the microstructural changes in 2205 duplex stainless steel has been investigated systematically. Scanning electron microscopy and X-ray diffraction were adopted to follow the microstructural evolution, while an energy dispersive spectrometer attached to scanning electron microscope was used to obtain localised chemical information of various phases. The ferritic matrix of the two phase 2205 duplex stainless steel ({approx} 45% ferrite and {approx} 55% austenite) undergoes a series of metallurgical transformations during ageing-formation of secondary austenite ({gamma}{sub 2}) and precipitation of Cr and Mo rich intermetallic (chi-{chi} and sigma-{sigma}) phases. For solution annealing at 1050 Degree-Sign C, significant amount of carbides were observed in the ferrite grains after 1 h of ageing at 700 Degree-Sign C. {chi} Phase precipitated after the precipitation of carbides-preferentially at the ferrite-ferrite and also at the ferrite-austenite boundaries. {sigma} Phase was not observed in significant quantity even after 6 h of ageing. The sequence of precipitation in samples solution annealed at 1050 Degree-Sign C was found to be carbides {yields} {chi} {yields} {sigma}. On the contrary, for samples solution annealed at 1100 Degree-Sign C, the precipitation of {chi} phase was negligible. {chi} Phase precipitated before {sigma} phase, preferentially along the ferrite-ferrite grain boundaries and was later consumed in the {sigma} phase precipitation. The {sigma} phase precipitated via the eutectoid transformation of ferrite to yield secondary austenite {gamma}{sub 2} and {sigma} phase in the ferrite and along the ferrite-austenite grain boundaries. An increase in the volume fraction of {gamma}{sub 2} and {sigma} phase with simultaneous decrease in the ferrite was evidenced with ageing. - Highlights: Black-Right-Pointing-Pointer Effect of solution annealing temperature on microstructural evolution is studied. Black-Right-Pointing-Pointer {chi} Phase precipitated preferentially in the samples solution annealed at 1050 Degree-Sign C. Black-Right-Pointing-Pointer {sigma} Phase precipitated preferentially in the samples solution annealed at 1100 Degree-Sign C. Black-Right-Pointing-Pointer For SA at 1050 Degree-Sign C, the sequence of precipitation was carbides {yields} {chi} phase {yields} {sigma} phase. Black-Right-Pointing-Pointer For SA at 1100 Degree-Sign C, {sigma} phase precipitated via the eutectoid reaction: ferrite (F) {yields} {sigma} + {gamma}{sub 2}.

36 MATERIALS SCIENCE↗

DOE OSTI2014

Assessment of uncertainties in the response of the African monsoon precipitation to land use change simulated by a regional model

Land use and land cover over Africa have changed substantially over the last sixty years and this change has been proposed to affect monsoon circulation and precipitation. This study examines the uncertainties on the effect of these changes on the African Monsoon system and Sahel precipitation using an ensemble of regional model simulations with different combinations of land surface and cumulus parameterization schemes. Furthermore, the magnitude of the response covers a broad range of values, most of the simulations show a decline in Sahel precipitation due to the expansion of pasture and croplands at the expense of trees and shrubs and an increase in surface air temperature.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Water loss through evapotranspiration after precipitation events in bioenergy crops grown in similar climatic conditions

The relationship between precipitation and evapotranspiration (ET) is critical to understanding water cycle related dynamics in ecosystems, including crops. Existing studies of bioenergy crops have primarily focused on annual or seasonal ET rates, with less attention given to the immediate ET response following precipitation events. This study examines the variation in ET rates in the days subsequent to precipitation events across various bioenergy crops—corn, switchgrass, and prairies—utilizing 13 years (2010–2022) of growing season data. Meteorological and eddy covariance flux data were collected from seven eddy covariance flux towers as part of the GLBRC scale-up experiment at the Kellogg Biological Station Long Term Ecological Research sites. The analysis revealed that average ET peaked the day after precipitation and declined linearly over the following days, with a statistically significant relationship (p-value = 0.00027, R2 = 0.96). Neither the type of biofuel vegetation nor the historical land use significantly influenced ET post-precipitation events (p-values = 0.53 and 0.153, respectively). Key predictors of ET following precipitation events include shortwave radiation, season, day of the year, ambient temperature, vapor pressure deficit (VPD), long-wave radiation, precipitation amount, soil moisture, and annual variability. These findings enhance our comprehension of ET responses in bioenergy crop systems, with implications for water management in sustainable agriculture.

09 BIOMASS FUELS↗

DOE OSTI2013

Facilitated Strontium Transport by Remobilization of Strontium-Containing Secondary Precipitates in Hanford Site Subsurface

Significantly enhanced immobilization of radionuclides (such as 90Sr and 137Cs) due to adsorption and coprecipitation with neo-formed colloid-sized secondary precipitates has been reported at the U.S. Department of Energy’s Hanford Site. However, the stability of these secondary precipitates containing radionuclides in the subsurface under changeable field conditions is not clear. Here, the authors tested the remobilization possibility of Sr containing secondary precipitates (nitrate-cancrinite) in the subsurface using saturated column experiments under different geochemical and flow conditions. The columns were packed with quartz sand that contained secondary precipitates (nitrate-cancrinite containing Sr), and leached using colloid-free solutions under different flow rates, varying pH, and ionic strength conditions. The results indicate remobilization of the neo-formed secondary precipitates could be possible given a change of background conditions. The remobility of the neo formed precipitates increased with the rise in the leaching solution flow rate and pH (in a range of pH 4 to 11), as well as with decreasing solution ionic strength. The increased mobility of Sr-containing secondary precipitates with changing background conditions can be a potential source for additional radionuclide transport in Hanford Site subsurface environments.

colloid↗

DOE OSTI2017

Characterization of microstructure and tempering response of conventionally quenched, short- and long-time sub-zero treated PM Vanadis 6 ledeburitic tool steel

Highlights: • Sub-zero treatment refines the microstructural features of Vanadis 6 steel. • Sub-zero treatments foster the precipitation of M{sub 3}C carbides at low temperatures • Transformation of retained austenite is accelerated due to sub-zero treatment. • Elevated hardness of sub-zero treated steel is preserved up to a temperature of 500 °C. • Tempering above 500 °C reduces hardness more significantly due to sub-zero treatment. - Abstract: The microstructure and tempering response of ledeburitic steel Vanadis 6 subjected to sub-zero treatments at a boiling temperature of liquid nitrogen for 4 and 17 h have been examined with reference to conventional heat treatment. The obtained results infer that i) sub-zero treatment induces time-dependent reduction of retained austenite amount, ii) the steel contains considerably enhanced population density of small globular carbides after sub-zero treatments; the population density is directly proportioned to the duration of sub-zero treatment, iii) application of sub-zero treatment results in overall refinement of the microstructure, iv) decomposition of retained austenite is accelerated by sub-zero treatments, v) tempering treatment reduces the population density of small globular carbides, vi) sub-zero treatments modify the precipitation behaviour of carbides; the precipitation of transient M{sub 3}C is accelerated within the low-temperature tempering range, but the precipitation of stable M{sub 7}C{sub 3} carbides is rather suppressed within the normal secondary hardening temperature range, viii) the application of sub-zero treatment leads to complete loss of secondary hardening peak, ix) the overall tempering response of the Vanadis 6 steel is a result of competition between the tempering of the martensite, decomposition of the retained austenite, variations in the small globular carbides count, and precipitation of carbides; higher hardness of sub-zero treated and low-temperature tempered steel can be attributed to lower retained austenite amount, and much higher number of small globular carbides while the loss of secondary hardening peak is explained by much lower contribution of secondary martensitic transformation, suppressed precipitation of special alloy carbides, and reduced number of small globular carbides.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Structure and Evolution of Mesoscale Convective Systems: Sensitivity to Cloud Microphysics in Convection‐Permitting Simulations Over the United States

Abstract Regional climate simulations over the continental United States were conducted for the 2011 warm season using the Weather Research and Forecasting model at convection‐permitting resolution (4 km) with two commonly used microphysics parameterizations (Thompson and Morrison). Sensitivities of the simulated mesoscale convective system (MCS) properties and feedbacks to large‐scale environments are systematically examined against high‐resolution geostationary satellite and 3‐D mosaic radar observations. MCS precipitation including precipitation amount, diurnal cycle, and distribution of hourly precipitation intensity are reasonably captured by the two simulations despite significant differences in their simulated MCS properties. In general, the Thompson simulation produces better agreement with observations for MCS upper level cloud shield and precipitation area, convective feature horizontal and vertical extents, and partitioning between convective and stratiform precipitation. More importantly, Thompson simulates more stratiform rainfall, which agrees better with observations and results in top‐heavier heating profiles from robust MCSs compared to Morrison. A stronger dynamical feedback to the large‐scale environment is therefore seen in Thompson, wherein an enhanced mesoscale vortex behind the MCS strengthens the synoptic‐scale trough and promotes advection of cool and dry air into the rear of the MCS region. The latter prolongs the MCS lifetimes in the Thompson relative to the Morrison simulations. Hence, different treatment of cloud microphysics not only alters MCS convective‐scale dynamics but also has significant impacts on their macrophysical properties such as lifetime and precipitation. As long‐lived MCSs produced 2–3 times the amount of rainfall compared to short‐lived ones, cloud microphysics parameterizations have profound impact in simulating extreme precipitation and the hydrologic cycle.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2016

Development of a Multi-Band Shared Aperture Reflectarray/Reflector Antenna Design for NASA

A dual-band (Ka/W) shared-aperture antenna system design has been developed as a proposed solution to meet the needs of NASA's planned Aerosol, Clouds, and Ecosystem (ACE) mission. The design is comprised of a compact Cassegrain reflector/reflect array with a fixed W-band feed and a cross track scanned Ka-band Active Electronically Scanned Array (AESA). Critical Sub-scale prototype testing and flight tests have validated some of the key aspects of this innovative antenna design, including the low loss reflector/reflect array surface. More recently the science community has expressed interest in a mission that offers the ability to measure precipitation (Ku- band with scanning) in addition to clouds and aerosols. In this paper we present findings from a design study that explores options for realizing a tri-frequency (Ku/Ka/W), shared-aperture antenna system to meet these science objectives. Design considerations included meeting performance requirements while striving to minimize payload size, weight, prime power, and cost. The extensive trades and lessons learned from the ACE system development were utilized as the foundation for this work.

doppler↗