Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Pozzolanic reaction of fly ash modified by fluidized bed reactor-vapor deposition

This study aimed to introduce fluidized bed reactor-vapor deposition (FBR-VD) into the modification of fly ash (FA) using the activators of NaOH, Na{sub 2}SO{sub 4}, and NaCl. The compressive strength, non-evaporable water and the hydration degree fly ash (HDFA) were investigated. The scanning electron microscopy (SEM), and the X-ray powder diffraction (XRD) Rietveld analysis were also conducted. The results demonstrate that FBR-VD can benefit the compressive strength when the dosage rates of NaOH, Na{sub 2}SO{sub 4} and NaCl are 0.1%, 0.5%, and 0.5%, respectively. The non-evaporable water and HDFA also increased at certain activator dosage rates. A modification layer consisting of nanometer-scale crystals forms on the surface of the FA beads, with NaOH or Na{sub 2}SO{sub 4} applied. NaOH can react with FA and promote its pozzolanic activity. Na{sub 2}SO{sub 4} and NaCl can benefit the HDFA by remaining undissolved, to increase their concentration around FA. The enhanced HDFA is also proved by the consumption of Ca(OH){sub 2}.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Characterization of alkali silica reaction gels using Raman spectroscopy

The ability of Raman spectroscopy to characterize amorphous materials makes this technique ideal to study alkali silica reaction (ASR) gels. The structure of several synthetic ASR gels was thoroughly characterized using Raman Spectroscopy. The results were validated with additional techniques such as Fourier transmission infrared spectroscopy, X-ray powder diffraction and thermogravimetric analysis. The Raman spectra were found to have two broad bands in the 800 to 1200 cm{sup −1} range and the 400 to 700 cm{sup −1} range indicating the amorphous nature of the gel. Important information regarding the silicate polymerization was deduced from both of these spectral regions. An increase in alkali content of the gels caused a depolymerization in the silicate framework which manifested in the Raman spectra as a gradual shift of predominant peaks in both regions. The trends in silicate depolymerization were in agreement with results from a NMR spectroscopy study on similar synthetic ASR gels.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Experimental and theoretical high pressure study of calcium hydroxyaluminate phases

Five calcium hydroxyaluminate phases have been investigated by synchrotron powder diffraction at high-pressure: two hydrogarnets, kuzelite, stratlingite and ettringite. The obtained bulk modulus, K{sub 0}, for kuzelite, stratlingite and ettringite were 23(1), 27(1) and 30(3) GPa, respectively. Kuzelite and stratlingite underwent transformations above 1 GPa likely releasing interlayer water. Kuzelite becoming markedly amorphous and stratlingite remained crystalline, K{sub 0} = 58(6) GPa in the 1.5–5.5 GPa pressure range. The structural behavior for hydrogarnet samples is prone to the use of pressure transmitting media. K{sub 0} for Ca{sub 3}Al{sub 2}(OH){sub 12} was 81(2) and 76(2) GPa for silicone oil and alcohol mixture, respectively. A similar study for Ca{sub 3}Al{sub 1.7}Fe{sub 0.3}(OH){sub 12} yielded 73(1) and 58(1) GPa for silicone oil and alcohol mixture, respectively. Atomistic calculations using periodic Density Functional Theory showed that the softening in iron-doped katoite, when compared to stoichiometric katoite, can be assigned primarily to greater compressibility of Ca−O dodecahedra, which overcompensates strengthening of hydrogen bonding between Al/Fe hydroxide groups.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The composition and performance of alite-ye'elimite clinker produced at 1300 °C

Alite-ye'elimite clinker is a high cementing clinker prepared by introducing calcium sulfoaluminate, a non-silicate mineral, into the cement clinker. The mineral composition and mechanics of tricalcium silicate-rich sulfur aluminate prepared at 1300 °C are reported. The effects of copper slag and phosphorus slag on the phase composition, heat release and compressive strength were investigated. The phase composition was analysed by X-ray powder diffraction. The results show that the copper slag and phosphorus slag can lower the burn temperature of the clinker and promote the coexistence of C{sub 3}S and C{sub 4}A{sub 3} S-bar . The quality of clinker produced at 1300 °C is satisfactory. The compressive strength of mortar curing at 28 d is higher than that of P·II 52.5.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Laboratory synthesis of C3S on the kilogram scale

An optimized process using amorphous silica for efficient C{sub 3}S synthesis in the laboratory is reported: an estimated production capacity of ~2 kg C{sub 3}S within a week is possible. Amorphous silica (fumed silica) was used as raw material and inter-ground with CaCO{sub 3} and water for C{sub 3}S synthesis, the dried raw mixture has sufficient green strength to be self-supporting, which allows large cylinders to be placed in Platinum crucibles. The mineral composition of the sintered sample was quantified with X-ray powder diffraction using Rietveld analysis. C{sub 3}S with 3 S synthesis was dramatically enhanced because of 1) increased burnability of the raw mix due to amorphous silica and very fine CaCO{sub 3} particles after grinding, 2) simplified sample preparation process avoiding pressing discs and 3) improved capacities of the crucible and furnace.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Autogenous healing of Engineered Cementitious Composites (ECC) based on MgO-fly ash binary system activated by carbonation curing

Developing self-healing of concrete cracks represents a critical approach for extending material longevity. If demonstrated on concretes with CO 2 stored through carbonation curing, self-healing can further mitigate infrastructure lifecycle emissions. In this study, the self-healing process is investigated on novel Engineered Cementitious Composites (ECC) based on binary blends of reactive MgO cement and siliceous fly ash activated by carbonation. The self-healing was observed under cyclic wetting and drying exposures and was characterized by measurements of resonance frequency, optical microscopy and X-ray computed microtomography (XCT). Thermogravimetric analysis, X-ray powder diffraction and scanning electron microscopy were employed to assist in identifying healing products and mechanisms. It was found that micro-cracks could be autogenously filled in 7 wet-dry cycles, as evidenced by over 95% recovery of resonance frequency and healed crack appearance under optical microscopic observation. Nevertheless, the composite mechanical performance, particularly tensile strength and ductility, did not fully recover with respect to the uncracked specimens. The inadequate post-healing mechanical properties were consistent with XCT observations that indicated low material densities in the cracked area. Based on the chemical and microstructural characterizations, it was determined that nesquehonite crystallites were responsible for the crack filling. Although the nesquehonite filled cracks will be less permeable to invasion of reactive fluids, novel strategies are needed to establish more robust healing capability to completely restore the crack bridging and composite tensile performance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Amorphous dispersions of flubendazole in hydroxypropyl methylcellulose: Formulation stability assisted by pair distribution function analysis

Here, we use X-ray pair distribution function (PDF) analysis applied to high-energy synchrotron X-ray powder diffraction data to evaluate the amorphous solid dispersions interactions and their aging stability. The obtained systems are based on hydroxypropyl methylcellulose (hypromellose) derivatives and flubendazole (FBZ) drug dispersions prepared using a spray-dryer technique. We carry out stability studies under aging parameters (40 °C/75% relative humidity) to tune the systems’ recrystallization. The results reveal that ion-base interactions between the drug-polymer matrix are responsible for reducing clustering processes yielding slower recrystallization and different ordering in the hypromellose phthalate (HPMCP/FBZ) and hypromellose acetate succinate (HPMC-AS/FBZ) systems and complete drug clustering in hypromellose (HPMC-E3/FBZ). The structural ordering was accessed using differential X-ray PDFs that revealed the region between 3.5 Å and 5.0 Å could be related to FBZ intermolecular interactions and is more ordered for the least stable system (HPMC-E3/FBZ) and less ordered for the most stable system (HPMCP/FBZ). These results show that the ion-base interactions between drug and matrix occur at these intermolecular distances.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Hot-melt extrudability of amorphous solid dispersions of flubendazole-copovidone: An exploratory study of the effect of drug loading and the balance of adjuvants on extrudability and dissolution

The FDA-approved anthelmintic flubendazole has shown potential to be repositioned to treat cancer and dry macular degeneration; however, its poor water solubility limits its use. Amorphous solid dispersions may overcome this challenge, but the balance of excipients may impact the preparation method and drug release. Here, we evaluate the influence of adjuvants and drug loading on the development of an amorphous solid dispersion of flubendazole-copovidone by hot-melt extrusion. The drug, copovidone, and adjuvants (magnesium stearate and hydroxypropyl cellulose) mixtures were statistically designed, and the process was performed in a twin-screw extruder. The study showed that flubendazole and copovidone mixtures were highly extrudable, except when drug loading was high (>40%). Furthermore, magnesium stearate positively impacted the extrusion and was more effective than hydroxypropyl cellulose. The extruded materials were evaluated by modulated differential scanning calorimetry and X-ray powder diffraction, obtaining positive amorphization and physical stability results. Pair distribution function analysis indicated the presence of drug rich domains with medium-range order structure and no evidence of polymer-drug interaction. All extrudates presented faster dissolution (HCl, pH 1.2) than pure flubendazole, and both adjuvants had a notable influence on the dissolution rate. In conclusion, hot-melt extrusion may be a viable option to obtain stable flubendazole: copovidone amorphous dispersions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Compressibility and thermoelectric behavior of TiCoSb half-Heusler compound at high pressures

We have performed high-pressure structural, electrical, and thermal property measurements on half-Heusler thermoelectric compound, TiCoSb. High-pressure powder diffraction measurements have been performed in an angle-dispersive geometry using synchrotron x-rays up to 115 GPa using a diamond anvil cell. The results show the cubic crystal structure (F-43m) stable and no pressure induced structural phase transitions were observed over the entire pressure range. The electrical and thermal properties were studied up to 5 GPa using a Paris-Edinburgh press equipped with a specialized sample cell assembly. The compressibility, variation of thermal conductivity, Seebeck co-efficient and thermoelectric figure of merit (ZT) for the material are discussed in detail.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Mechanism of the α-to-β phase transformation in the LaNi 5 -H 2 system

High-energy synchrotron in situ X-ray powder diffraction has been used to elucidate the mechanism of the hydriding phase transformation in a LaNi 5 model hydrogen storage intermetallic in real time. The transformation proceeds at 10 ºC via the transient growth of an interfacial phase, the {gamma} phase, with lattice parameters intermediate between those of the α (dilute solid solution) and β (concentrated hydride) phases. The γ phase forms to partially accommodate the 24% change in unit cell volume between the α and β phases during hydriding and dehydriding. The α, γ and β phases coexist at the nanoscopic level.

08 HYDROGEN↗
DOE OSTI2018

Anomalous specific heat and magnetic properties of Tm x Dy 1-x Al 2 (0 ≤ x ≤ 1)

Here, we study crystal structure, phase transitions and magnetism of pseudo-binary Tm x Dy 1-x Al 2 (0 ≤ x ≤ 1) compounds using temperature dependent X-ray powder diffraction, specific heat and magnetization measurements, first principles, and model calculations. In low external magnetic fields, Dy-rich compounds undergo continuous, second-order phase transitions at the respective Curie temperatures, T C . In contrast, the Tm-rich compounds exhibit discontinuous, first-order anomalies in the magnetically ordered states. These sharp transitions correlate with a substantial energy difference between the room temperature cubic and ground state rhombohedral structures of TmAl 2 . A clear anomaly in the lattice parameter is observed at ~30 K for x = 0.5, which nearly coincides with T C = 31.2 K. The effective quadrupolar moment of the lanthanides changes sign around x = 0.5, which leads to a nearly zero anisotropy constant and approximately spherical effective 4f charge densities, providing an explanation for the lack of structural distortions below T C for x = 0.5. The calculations confirm [001] as the easy magnetization axis in the ground state tetragonal structure of DyAl 2 , and reveal collapse of the orbital magnetic moment when the easy magnetization direction changes to [111]. Within the rhombohedral ground state of TmAl 2 [111] is the easy magnetization direction.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Structural, magnetic and electronic properties of Ti-doped BaFeO 3-δ exhibiting colossal dielectric permittivity

We report a systematical investigation of the structural, magnetic, electronic, and dielectric properties of BaFe 1-x Ti x O 3-δ (x = 0.05, 0.10, 0.15 and 0.20) samples synthesized via the solid-state reaction method. Rietveld refinement using a combination of room-temperature X-ray (XRD) and neutron powder diffraction (NPD) data confirms single phases with a 6H-type structure for all the samples. X-ray absorption spectroscopy (XAS) study reveals a coexistence of Fe 3+ and Fe 4+ , whose ratio remains almost unchanged with increasing Ti concentration. Magnetization measurements reveal a low-temperature inhomogeneous magnetic state with coexisting ferromagnetic (FM), AFM clusters and a paramagnetic phase. Moreover, magnetization of x = 0.10 shows a pinched hysteresis loop behavior, suggesting the coexistence of hard and soft FM phases in samples with high Ti concentrations. Low-temperature NPD measurements also confirm the absence of any long-range magnetic order in the samples. A colossal dielectric permittivity and two relaxation processes are observed for most of the studied samples. There is a change in electric conduction mechanism from the small polaron hopping to the Mott's variable-range hopping with increasing Ti concentration.

36 MATERIALS SCIENCE↗
DOE OSTI2020

From a conventional ferromagnetism to a frustrated magnetism: An unexpected role of Fe in Nd(Al 1-x Fe x ) 2 (x ≤ 0.2)

The structure and magnetic properties of Nd(Al 1-x Fe x ) 2 alloys with x = 0, 0.05, 0.1 and 0.2, which adopt cubic MgCu 2 -type structure with space group Fd3¯m, are studied using x-ray powder diffraction, static and dynamic magnetization, and calorimetric measurements. The lattice constant decreases linearly with increasing Fe content from 8.0106(4) Å to 7.9044(4) Å. Large thermal irreversibilities between zero-field-cooled and field-cooled conditions are observed for all substituted samples. Here, the magnetic transition temperatures exhibit a minimum for x = 0.1, and coercive fields at 2 K increase from 70 Oe for x = 0 to 6.3 kOe for x = 0.2. The absence of λ-type peak in the heat capacity data, frequency dependence of ac magnetic susceptibility, and memory effects indicate formation of a cluster-glass magnetic state when x ≥ 0.1.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Borderline first-order magnetic phase transition in AlFe 2 B 2

The thermal evolution of lattice parameters coupled with heat capacity data provide insight into tailorable magnetism-structure attributes in the orthorhombic compound AlFe 2 B 2 that was synthesized with and without small additions of gallium. Temperature-dependent X-ray powder diffraction experiments conducted through the magnetic phase transition reveal that the a- and b-parameters of both samples increase with increasing temperature while the c-parameter decreases. While a weak volumetric thermal expansion is noted over a range of temperatures well below and above the magnetic phase transition, anomalous behavior was observed within the phase transition region itself to reveal a magnetostructural phase transition with borderline first-order character in the Ga-modified sample but of more second-order character in the Ga-free sample. It is established that the nearest-neighbor Fe-Fe interatomic distance within the (ab)-plane plays a dominant role in influencing the magneto-functional response of these compounds. The magnetocaloric properties are discussed in the context of temperature-induced changes of the interatomic bonding that are influenced by the hypothesized presence of iron antisite defects in the AlFe 2 B 2 lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Transition from an incommensurate spin density wave to a commensurate magnetic order in a triangular lattice compound Ho 2 PdAl 6 Ge 4

Rare-earth (RE) intermetallics on a triangular lattice are promising candidates for generating interesting magnetic phases due to the complex interplay between Ruderman-Kittel-Kasuya-Yoshida (RKKY) interaction and geometrical frustration. Here, in this work, we report the exotic magnetic structure of a layered compound Ho 2 PdAl 6 Ge 4 with triangular lanthanide nets. Magnetization and heat capacity measurements in zero magnetic field reveal two magnetic phase transitions at T N1 = 10.8 K and T N2 = 6.0 K. Neutron powder diffraction demonstrates a commensurate antiferromagnetic phase with k 1 = (0, 0, 1.5) below T N2 . With increasing temperature, another incommensurate vector appears and therefore, the magnetic structure of the intermediate state is identified as an unusual incommensurate spin density wave with two propagation vectors k 1 = (0, 0, 1.5) and k 2 = (0.0492, 0.0492, 1.5). The magnetic moments in the intermediate state rotate continuously and form an unusual S-shaped wave arrangement in the ab plane, sharing similarities with typical cycloid and helix magnetic orders. These results identify Ho 2 PdAl 6 Ge 4 as a candidate for exploring field-induced topological magnetic phases such as skyrmions, opening the way for further investigations on the family of RE 2 PdAl 6 Ge 4 materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetic structure evolution of LiFe 1- x Co x PO 4 olivines upon delithiation

We present a comprehensive study of the nuclear and magnetic structures of the mixed olivine solid solution series LiFe 1-x Co x PO 4 as well as their delithiated counterparts, for metal concentrations x = 0.2 - 0.6. Through neutron powder diffraction studies, we find that the LiFe 1-x Co x PO 4 series orders in the magnetic space group Pnma', consistent with their Li(Fe/Co)PO 4 parent structures. After chemical delithiation using peracetic acid, however, the removal of over 30% of the lithium from the lattice results in a transition from an A y -type to an A x -type antiferromagnetic structure. The magnetic space group consistent with A x antiferromagnetism was found to be Pn'm'a'. Interestingly, magnetic susceptibility measurements of both series reveal that delithiation increases the magnetic transition temperature, T N , from 50 K to 115 K. We find through analysis of the diffraction data that the unit cell parameters change linearly as a function of x; consequently, the exchange pathways between the Fe/Co magnetic cations are affected by the delithiation. Here, we discuss how exchange pathways, metal oxidation states, and d-orbital occupation all contribute to the observed magnetic symmetries and trends in T N in both series.

Antiferromagnet↗