SEARCH · Engineering Papers

Results for “Pb”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Comparison of speech intelligibility in cockpit noise using SPH-4 flight helmet with and without active noise reduction

Active Noise Reduction (ANR) is a new technology which can reduce the level of aircraft cockpit noise that reaches the pilot's ear while simultaneously improving the signal to noise ratio for voice communications and other information bearing sound signals in the cockpit. A miniature, ear-cup mounted ANR system was tested to determine whether speech intelligibility is better for helicopter pilots using ANR compared to a control condition of ANR turned off. Two signal to noise ratios (S/N), representative of actual cockpit conditions, were used for the ratio of the speech to cockpit noise sound pressure levels. Speech intelligibility was significantly better with ANR compared to no ANR for both S/N conditions. Variability of speech intelligibility among pilots was also significantly less with ANR. When the stock helmet was used with ANR turned off, the average PB Word speech intelligibility score was below the Normally Acceptable level. In comparison, it was above that level with ANR on in both S/N levels.

Chan, Jeffrey W.↗

NASA NTRS1989

Nitrate in the atmospheric boundary layer of the tropical South Pacific - Implications regarding sources and transport

Weekly bulk aerosol samples collected at three sites in the tropical South Pacific from 1983 to 1987 are analyzed. The mean nitrate concentrations obtained for the sites range from 0.107 to 0.117 microg/cu m. The results suggest that the region is minimally affected by the transport of soil material and pollutants from the continents. Measurements from sites in the tropical North Pacific show mean nitrate concentrations that are about three times higher than those in the South Pacific, showing that the North Pacific is significantly impacted by the transport of material from Asia and North America. The relationships between the nitrate concentrations to other constituents at American Samoa are discussed, including nonseasalt sulfate, Pb-210, and Be-7.

Savoie, Dennis L.↗

NASA NTRS1989

Efficient estimation of diffusion during dendritic solidification

A very efficient finite difference method has been developed to estimate the solute redistribution during solidification with diffusion in the solid. This method is validated by comparing the computed results with the results of an analytical solution derived by Kobayashi (1988) for the assumptions of a constant diffusion coefficient, a constant equilibrium partition ratio, and a parabolic rate of the advancement of the solid/liquid interface. The flexibility of the method is demonstrated by applying it to the dendritic solidification of a Pb-15 wt pct Sn alloy, for which the equilibrium partition ratio and diffusion coefficient vary substantially during solidification. The fraction eutectic at the end of solidification is also obtained by estimating the fraction solid, in greater resolution, where the concentration of solute in the interdendritic liquid reaches the eutectic composition of the alloy.

Yeum, K. S.↗

NASA NTRS1990

The solar coronal density irregularity n squared bar/(n bar) squared derived from simultaneous measurements of the EUV and K-coronal brightness

Results are reported from a study of the low corona based on cospatial and cotemporal measurements of the K-coronal polarized brightness pB, and the intensity of the strong resonance line Mg x 625A as a function of height between 1.05 and 1.24 solar radius. Taken together, these measurements yield an estimate of the solar coronal density irregularity. This quantity, is found to be much greater than 1. On the basis of a simple two-component model, it is found that the well-studied resolved structures of the inner corona as presently understood are not capable of explaining the observed irregularity. It is conjectured that subresolution density fluctations associated with coronal dissipation and heating may be the source of the excess irregularity.

Orrall, F. Q.↗

NASA NTRS1990

Ilmenite-rich pyroclastic deposits - An ideal lunar resource

With a view of investigating possible economic benefits that a permanent lunar settlement might provide to the near-earth space infrastructures, consideration was given to the ilmenite-rich pyroclastic deposits as sources of oxygen (for use as a propellant) and He-3 (for nuclear fusion fuel). This paper demonstrates that ilmenite-rich pyroclastic deposits would be excellent sources of a wide variety of valuable elements besides O and He-3, including Fe, Ti, H2, N, C, S, Cu, Zn, Cd, Bi, and Pb. It is shown that several ilmenite-rich pyroclastic deposits of regional extent exist on the lunar surface. The suitability of regional pyroclastic deposits for lunar mining operations, construction activities, and the establishment of permanent lunar settlements is examined.

Hawke, B. R.↗

NASA NTRS1990

Electrooptic modulation methods for high sensitivity tunable diode laser spectroscopy

A CdTe phase modulator and low power RF sources have been used with Pb-salt tunable diode lasers operating near 8 microns to generate optical sidebands for high sensitivity absorption spectroscopy. Sweep averaged, first-derivative sample spectra of CH4 were acquired by wideband phase sensitive detection of the electrooptically (EO) generated carrier-sideband beat signal. EO generated beat signals were also used to frequency lock the TDL to spectral lines. This eliminates low frequency diode jitter, and avoids the excess laser linewidth broadening that accompanies TDL current modulation frequency locking methods.

Glenar, David A.↗

NASA NTRS1990

Si-Ge-metal ternary phase diagram calculations

Solution crystal growth and doping conditions of Si-Ge alloys used for high-temperature thermoelectric generation are determined here. Liquid-phase epitaxy (LPE) has been successfully employed recently to obtain single-crystalline homogeneous layers of Si-Ge solid solutions from a liquid metal solvent. Knowledge of Si-Ge-metallic solvent ternary phase diagrams is essential for further single-crystal growth development. Consequently, a thermodynamic equilibrium model was used to calculate the phase diagrams of the Si-Ge-M systems, including solid solubilities, where M is Al, Ga, In, Sn, Pb, Sb, or Bi. Good agreement between calculated liquidus and solidus data and experimental DTA and microprobe results was obtained. The results are used to compare the suitability of the different systems for crystal growth (by LPE-type process).

Fleurial, J. P.↗

NASA NTRS1990

Impact spallation experiments - Fracture patterns and spall velocities

The spall velocities produced by nine experimental impacts of 1 to 6.5 km/sec into San Marcos gabbro targets, using projectiles of Fe, Al, Pb, and basalt of various sizes, have been measured in conjunction with fragment-velocity high-speed filmings of the events. A detailed comparison is made between measured spall velocities and those predicted by the model of Melosh (1984), with a view to the compatibility of small-scale results and large planetary impacts. Attention is also given to the patterns of internal fracture generated by impact within the targets.

Polanskey, Carol A.↗

NASA NTRS1990

Plasma-assisted physical vapor deposition surface treatments for tribological control

In any mechanical or engineering system where contacting surfaces are in relative motion, adhesion, wear, and friction affect reliability and performance. With the advancement of space age transportation systems, the tribological requirements have dramatically increased. This is due to the optimized design, precision tolerance requirements, and high reliability expected for solid lubricating films in order to withstand hostile operating conditions (vacuum, high-low temperatures, high loads, and space radiation). For these problem areas the ion-assisted deposition/modification processes (plasma-based and ion beam techniques) offer the greatest potential for the synthesis of thin films and the tailoring of adherence and chemical and structural properties for optimized tribological performance. The present practices and new approaches of applying soft solid lubricant and hard wear resistant films to engineering substrates are reviewed. The ion bombardment treatments have increased film adherence, lowered friction coefficients, and enhanced wear life of the solid lubricating films such as the dichalcogenides (MoS2) and the soft metals (Au, Ag, Pb). Currently, sputtering is the preferred method of applying MoS2 films; and ion plating, the soft metallic films. Ultralow friction coefficients (less than 0.01) were achieved with sputtered MoS2. Further, new diamond-like carbon and BN lubricating films are being developed by using the ion assisted deposition techniques.

Spalvins, Talivaldis↗

NASA NTRS1990

Thermodynamic properties and crystallization kinetics at high liquid undercooling

The heat capacities of liquid and crystalline Au-Pb-Sb alloys in the glass-forming composition range were measured with droplet emulsion and bulk samples. Based on the measured C(sub p) data, the entropy, enthalpy, and Gibbs free energy functions of the eutectic, solid mixture, and undercooled liquid were determined as a function of undercooling and compared with theoretical predictions. The results indicate an isentropic temperature at 313 + or - 5 K, which agrees well with experimental data for the glass transition. A kinetics analysis of the nucleation undercooling response suggests that the proper choice for the Gibbs free energy change during crystallization is most important in analyzing the nucleation kinetics. By classical nucleation theory, the prefactors obtained, based on a variety of theoretical predictions for the driving force, can differ by six orders of magnitude. If the nucleation rates are extrapolated to high undercooling, the extrapolations based on measured heat capacity data show agreement, whereas the predicted nucleation rates are inconsistent with results from drop tower experiments. The implications for microg experiments are discussed.

Fecht, Hans J.↗

NASA NTRS1990

Orientation of late Precambrian sutures in the Arabian-Nubian shield

Recent tectonic models have resulted in conflicting descriptions of how the late Precambrian sutures of the Arabian-Nubian shield extend into northeast Africa. The Hamisana shear zone in northeastern Sudan is critical to this discussion because it truncates and disrupts two sutures, the Allaqi-Heiani and the Onib-Sol Hamed. Analysis of field structural data, Thematic Mapper imagery, and Rb-Sr and U-Pb geochronology suggests that the Allaqi-Heiani suture is the western extension of the Onib-Sol Hamed suture and that both make up the exposed parts of a far-traveled, polydeformed ophiolitic nappe complex. Subsequent deformation localized in the Hamisana shear zone disrupted this nappe and displaced the suture between 660 and 550 Ma during regional deformation associated with the Najd fault system. These results indicate that at least one suture extends westward into the interior of northern Africa.

Stern, Robert J.↗

NASA NTRS1990

Pyroclastic deposits as sites for lunar bases

Ilmenite-rich pyroclastic deposits may prove to be excellent sites for the establishment of a permanent lunar base for mining purposes. A wide variety of potentially useful by-products could be produced (e.g., Fe, Ti, H, N, C, S, Cu, Zn, Cd, Bi, and Pb). A number of ilmenite-rich pyroclastic deposits of regional extent has been studied. The physical properties of the regional pyroclastic units have important implications for lunar construction. These extensive, deep deposits of ilmenite-rich pyroclastic material are block-free and uncontaminated; they could be easily excavated and would be ideal for lunar mining operations. These deep, loose pyroclastic deposits would also be ideal for rapidly covering base modules with an adequate thickness of shielding.

Hawke, B. Ray↗

NASA NTRS1991

Phase selection during crystallization of undercooled liquid eutectic lead-tin alloys

During rapid solidification substantial amounts of undercooling are in general required for formation of metastable phases. Crystallization at varying levels of undercooling and melting of metastable phases were studied during slow cooling and heating of emulsified PB-Sn alloys. Besides the experimental demonstration of the reversibility of metastable phase equilibra, two different principal solidification paths have been identified and compared with the established metastable phase diagram and predictions from classical nucleation theory. The results suggest that the most probable solidification path is described by the 'step rule' resulting in the formation of metastable phases at low undercooling, whereas the stable eutectic phase mixture crystallizes without metastable phase formation at high undercooling.

Fecht, H. J.↗

NASA NTRS1991

Chronology of early Archaean granite-greenstone evolution in the Barberton Mountain Land, South Africa, based on precise dating by single zircon evaporation

Precise Pb-207/Pb-206 single zircon evaporating ages are reported for low-grade felsic metavolcanic rocks within the Onverwacht and Fig Tree Groups of the Barberton Greenstone Belt (BGB), South Africa, as well as for granitoid plutons bordering the belt. Dacitic tuffs of the Hooggenoeg Formation in the upper part of the Onverwacht Group are shown to yield ages between 3445 + or - 3 and 3416 + or - 5 Ma and to contain older crustal components represented by a 3504 + or - 4 Ma old zircon xenocryst. Fig Tree dacitic tuffs and agglomerates have euhedral zircons between 3259 + or - 3 Ma in age which are interpreted to reflect the time of crystallization. The comagmatic relationships between greenstone felsic volcanic units and the surrounding plutonic suites are keynoted. The data adduced show that the Onverwacht and Fig Tree felsic units have distinctly different ages and thus do not constitute a single, tectonically repeated unit as proposed by others. It is argued that conventional multigrain zircon dating may not accurately identify the time of felsic volcanic activity in ancient greenstones, and that the BGB in the Kaapval craton of southern Africa and greenstones in the Pilbara Block of Western Australia may have been part of a larger crustal unit in early Archaean times.

Kruener, Alfred↗

NASA NTRS1989

Long wavelength semiconductor lasers development for infrared heterodyne applications

PbSnTe single crystals were grown in a new 3 zone furnace. Molecular beam epitaxy (MBE) growth parameters have been established, including beam flux vs. temperature, and growth rates and dopant vs. PbTe flux ratios for the various effusion sources involved. Lattice matching studies were conducted and doping studies were completed. Broad area Pb(1-x)Sn(x)Te double heterostructure lasers were fabricated with active layer compositions up to x equals 0.04 at percent Sn in the active layers. Electrical and optical test data are presented.

Feit, Zeev↗

NASA NTRS1991

Nd-142/Nd-144 in SNCs and early differentiation of a heterogeneous Martian mantle

Sm/Nd correlated variations in Nd-142/Nd-144 have been observed for mineral phases of achondrites from decay of live Sm-146 in the early solar system. Crystallization ages of shergottites-nakhlites-Chassigny (SNC) meteorites are less than or = 1.3 Ga, so variations of Nd-142/Nd-144 among mineral phases of the SNC's are not expected. However, if SNC's were derived from source reservoirs of differing Sm/Nd ratios, established while Sm-146 was still alive, and which remained isolated except for magma extraction, then variations in Nd-142/Nd-144 would exist among individual SNC meteorites. Rb-Sr and U-Pb isotopic data for the shergottites imply differentiation of their parent planet approximately 4.6 Ga ago. The confirmation of the conclusion that the nakhlites and shergottites were derived from different source regions, and that, consequently, the shergottite parent body (SPB) mantle was heterogeneous is presented.

Nyquist, L. E.↗

NASA NTRS1992

Glass precursor approach to high-temperature superconductors

The available studies on the synthesis of high T sub c superconductors (HTS) via the glass precursor approach were reviewed. Melts of the Bi-Sr-Ca-Cu-O system as well as those doped with oxides of some other elements (Pb, Al, V, Te, Nb, etc.) could be quenched into glasses which, on further heat treatments under appropriate conditions, crystallized into the superconducting phase(s). The nature of the HTS phase(s) formed depends on the annealing temperature, time, atmosphere, and the cooling rate and also on the glass composition. Long term annealing was needed to obtain a large fraction of the 110 K phase. The high T sub c phase did not crystallize out directly from the glass matrix, but was preceded by the precipitation of other phases. The 110 K HTS was produced at high temperatures by reaction between the phases formed at lower temperatures resulting in multiphase material. The presence of a glass former such as B2O3 was necessary for the Y-Ba-Cu-O melt to form a glass on fast cooling. A discontinuous YBa2Cu3O(7-delta) HTS phase crystallized out on heat treatment of this glass. Attempts to prepare Tl-Ba-Ca-Cu-O system in the glassy state were not successful.

Bansal, Narottam P.↗

NASA NTRS1991

Effect of doping in the Bi-Sr-Ca-Cu-O superconductor

The results of the effect of doping on the superconducting transition in the Bi-Sr-Ca-Cu-O system are reported. Samples were prepared under identical conditions with varying types (Pb, Sb, Sn, Nb) and amounts of dopants. All samples consisted of multiple phases, and showed stable and reproducible superconducting transitions. Stabilization of the well known 110 K phase depends on both the type and amount of dopant. No trace of superconducting phase of 150 K and above was observed.

Akbar, S. A.↗