Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle dispersion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Smart Pixels: In-pixel AI for on-sensor data filtering

We present a smart pixel prototype readout integrated circuit (ROIC) designed in CMOS 28 nm bulk process, with in-pixel implementation of an artificial intelligence (AI) / machine learning (ML) based data filtering algorithm designed as proof-of-principle for a Phase III upgrade at the Large Hadron Collider (LHC) pixel detector. The first version of the ROIC consists of two matrices of 256 smart pixels, each 25$\times$25 µm\textsuperscript{2} in size. Each pixel consists of a charge-sensitive preamplifier with leakage current compensation and three auto-zero comparators for a 2-bit flash-type ADC. The frontend is capable of synchronously digitizing the sensor charge within 25 ns. Measurement results show an equivalent noise charge (ENC) of $\sim$30e\textsuperscript{-} and a total dispersion of $\sim$100e\textsuperscript{-} The second version of the ROIC uses a fully connected two-layer neural network (NN) to process information from a cluster of 256 pixels to determine if the pattern corresponds to highly desirable high-momentum particle tracks for selection and readout. The digital NN is embedded in-between analog signal processing regions of the 256 pixels without increasing the pixel size and is implemented as fully combinatorial digital logic to minimize power consumption and eliminate clock distribution, and is active only in the presence of an input signal. The total power consumption of the neural network is $\sim$ 300 $\mu$W. The NN performs momentum classification based on the generated cluster patterns and even with a modest momentum threshold, it is capable of 54.4\% – 75.4\% total data rejection, opening the possibility of using the pixel information at 40MHz for the trigger. The total power consumption of analog and digital functions per pixel is $\sim$ 6 $\mu$W per pixel, which corresponds to $\sim$ 1 W/cm\textsuperscript{2} staying within the experimental constraints.

Parpillon, Benjamin↗
DOE OSTI2026

Sequential surface synthesis of dispersed sub-nanometer iridium on titanium nitride for acidic water oxidation

Maximizing iridium utilization while maintaining high oxygen evolution reaction (OER) performance remains a persistent challenge in acidic water electrolysis. Immobilizing Ir on conductive, acid-stable supports is promising, yet simultaneously achieving sub-nanometer size, high area coverage, and strong electronic coupling is difficult. Here, we report a sequential surface synthesis on titanium nitride (TiN) that yields uniformly distributed sub-nanometer Ir arrays (∼0.7 nm). Our method uses ethylenediaminetetraacetic acid (EDTA) as a temporal scaffold: it chemisorbs to TiN to install dense chelating sites, captures Ir 3+ ions, and confines Ir cluster growth. A subsequent thermal treatment at 500 °C in a reducing atmosphere removes the ligand shell, while preserving ultrasmall particle size and establishing direct Ir–TiN electronic coupling. The optimized catalyst exhibits mixed Ir 0 /Ir x+ coordination with low charge-transfer resistance (R ct = 19.2 Ω), delivering a mass activity of 342 A g Ir −1 at 1.54 V in acidic electrolyte. In situ X-ray absorption spectroscopy reveals irreversible surface oxidation as the primary stability-limiting factor. This stepwise strategy provides a general framework for supported catalysts that maximize precious metal utilization via sub-nanometer dispersion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Three-Dimensional Settling Dynamics of Environmental Microplastics

Resolving the three-dimensional settling dynamics of microplastic (MP) particles is essential for developing comprehensive models of MP transport in rivers-both vertically within the water column and laterally across the channel. While previous research has largely examined one-dimensional vertical settling velocities, little is known about the lateral drifting, settling paths, and horizontal velocities of MPs. To address this, we investigated the full three-dimensional settling behavior of environmental MPs collected from rivers and ocean water, as well as from estuarine and ocean sediment. Geometric properties of 127 environmental MPs were quantified by a dynamic particle image analyzer, and their settling trajectories were recorded and reconstructed via a multicamera tracking algorithm. This enabled quantification of a particle's horizontal drift, tortuosity, amplitude and settling pattern, as well as vertical and horizontal velocities. Results showed that spherical MPs settled with minimal lateral displacement, whereas elongated particles, such as rod- and blade-shaped MPs, displayed pronounced lateral movements, reaching up to 65 times their equivalent diameter and averaging more than twice that of spheres. These dynamics suggest that elongated MPs may have a greater probability for wider lateral dispersion in rivers, increasing their likelihood for interactions with riverbanks and channel boundaries compared to more spherical shaped MPs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Coherent Phonon Dynamics in Plasmonic Gold Tetrahedral Nanoparticle Ensembles

Coherent phonon modes supported by plasmonic nanoparticles offer prospective applications in chemical and biological sensing. Whereas characterization of these phonon modes often requires single particle measurements, synthetic routes to narrow size distributions of nanoparticles permit ensemble investigations. Recently, the synthesis of highly monodisperse gold tetrahedral nanoparticles with tunable edge length and corner sharpness has been developed. Herein, we characterize a size series of these nanoparticles in colloidal dispersion via transient absorption spectroscopy to examine their mechanical and plasmonic responses upon photoexcitation. Oscillations of transient absorption signals are observed in the plasmon resonance and correspond to the lowest order radial breathing modes of the nanoparticles, the frequencies of which are affected by edge length and truncation of the corners. Furthermore, quality factor values ranging from 10 to 15 are observed for the oscillations that convey potential utility in mass-sensing and plasmon-exciton coupling photonics schemes. Finite-difference time domain and finite element analysis calculations establish the specific optically-relevant phonon modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Computational Fluid Dynamics Simulations to Assess Spatial Variability and Optimal Ventilation Scenarios for Biological Laboratory Exposures

A significant amount of uncertainty exists regarding potential human exposure to laboratory biomaterials and organisms in Biosafety Level 2 (BSL-2) research laboratories. Computational fluid dynamics (CFD) modeling is proposed as a way to better understand potential impacts of different combinations of biomaterials, laboratory manipulations, and exposure routes on risks to laboratory workers. Here, in this study, we use CFD models to simulate airborne concentrations of contaminants in an actual BSL-2 laboratory under different configurations. Results show that ventilation configuration, sampling location, and contaminant source location can significantly impact airborne concentrations and exposures. Depending on the source location and airflow patterns, the transient and time-integrated concentrations varied by several orders of magnitude. Contaminant plumes from sources located near a return vent (or exhaust like a fume hood or ventilated biosafety cabinet) are likely to be more contained than sources that are further from the exhaust. Having a direct flow between the source and the exhaust (through-flow condition) may reduce potential exposures to individuals outside the air flow path. Designing a BSL-2 room with ventilation and airflow patterns that maximize through-flow conditions to the return/exhaust vents and minimize dispersion and mixing throughout the room is, therefore, recommended. CFD simulations can also be used to assist in characterizing the impacts of supply and return vent locations, room layout, and source locations on spatial and temporal contaminant concentrations. In addition, proper placement of particle sensors can also be informed by CFD simulations to provide additional characterization and monitoring of potential exposures in BSL-2 facilities.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2022

The Complexity and Challenges of Irradiation-Induced Phase Instability Phenomenon in Nuclear Power Plant Components

High energy irradiation by neutrons or ions of metastable austenitic 300-series steels appears to initiate formation of bcc-phases with different morphology and elemental composition compared to that of retained ferrite. Extensive formation of specific Fe-rich ferrite was observed on the grain boundaries of annealed Russian steel 12Cr18Ni10Ti, an analog of AISI 321, after irradiation in the center-core region of sodium-cooled BN-350 fast reactor (SFR) doses up to 57 dpa at ~1×10-6dpa/sec. The ferrite fraction determined from scanning electron microscopy (SEM) closely matched the magnetic fraction determined using a ferritscope confirmed by X-ray diffraction analysis and selected area diffraction patterns. Chemical composition of the secondary phases was determined by energy dispersive X-ray analysis using transmission electron microscope, showing Fe-rich ferrite domains. Fe-ion irradiation (2.3 MeV) was used to study the accumulation of ferrite and martensite phases at higher dpa rates. The very high etchability of these ferrite particles in alcohol-based solutions may signal a very high etching in hot water, leading to accelerated intergranular cracking, especially upon long-term exposure during extended plant lifetimes.

D a, Merezhko↗
DOE OSTI2024

Phonon-Driven Femtosecond Dynamics of Excitons in Crystalline Pentacene from First Principles

Nonradiative exciton relaxation processes are critical for energy transduction and transport in optoelectronic materials, but how these processes are connected to the underlying crystal structure and the associated electron, exciton, and phonon band structures, as well as the interactions of all these particles, is challenging to understand. Here, in this work, we present a first-principles study of exciton-phonon relaxation pathways in pentacene, a paradigmatic molecular crystal and optoelectronic semiconductor. We compute the momentum- and band-resolved exciton-phonon interactions, and use them to analyze key scattering channels. We find that both exciton intraband scattering and interband scattering to parity-forbidden dark states occur on the same ~100 fs timescale as a direct consequence of the longitudinal-transverse splitting of the bright exciton band. Consequently, exciton-phonon scattering exists as a dominant nonradiative relaxation channel in pentacene. We further show how the propagation of an exciton wave packet is connected with crystal anisotropy, which gives rise to the longitudinal-transverse exciton splitting and concomitant anisotropic exciton and phonon dispersions. Our results provide a framework for understanding the role of exciton-phonon interactions in exciton nonradiative lifetimes in molecular crystals and beyond.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Complete quasilinear model for the acceleration-driven lower hybrid drift instability and a computational assessment of its validity

A complete quasilinear model is derived for the electrostatic acceleration-driven lower hybrid drift instability in a uniform two-species low-beta plasma in which current is perpendicular to the background magnetic field. The model consists of coupled nonlinear velocity space diffusion equations for the volume-averaged ion and electron distribution functions. Each species' diffusion coefficient depends on a time-evolving spectral density of the electric-field energy per unit volume and a time-evolving dispersion relation. The dispersion relation is expressed analytically in integral form without the use of asymptotic limits and applies to arbitrary distribution functions, so long as they can be expressed as a function of one velocity coordinate, e.g., f⁡(vy) or f⁡(v⊥). The quasilinear model conserves energy and is complete in that it fully describes the evolution of the distribution functions, including resonant and nonresonant particle-wave interactions, while accounting for distribution-function-dependent mixed-complex frequencies. Further, the quasilinear diffusion model is solved numerically and self-consistently using a Crank-Nicolson temporal discretization and a second-order finite-volume velocity-space discretization. Numerical solutions are compared to nonlinear fourth-order accurate continuum kinetic Vlasov-Poisson simulations. Evolution of electric-field energy, growth rates, distribution functions, and diffusion coefficients are shown to be in agreement with Vlasov simulations. The quasilinear model is shown to predict anomalous transport terms, like resistivity and heating, to within a factor of order unity. Discrepancies between the quasilinear model and Vlasov simulations are assessed and attributed primarily to lack of damping in the quasilinear description and to the use of unperturbed-orbit susceptibilities in the linear theory dispersion relation. The results illuminate the predictive accuracy of the quasilinear model, place approximate bounds on its validity, and provide much needed vetting of quasilinear theory's ability to predict the nonlinear state of a microturbulent plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Atom Probe Tomography Characterization of High-Dose Ion Irradiated MA957

This paper presents a comprehensive characterization study of the microstructural responses to ion irradiation of the oxide dispersion strengthened (ODS) ferritic alloy MA957 using atom probe tomography (APT). The MA957 specimens were irradiated by 1.8 MeV Cr3+ ions to doses and temperatures relevant to advanced fast reactors (100 and 500 dpa at 400-500 °C). The average sizes of the YTiO particles decreased slightly after irradiation at all temperatures, with the most pronounced change at 400 °C. The particle number densities for 400 and 500 °C were slightly below number densities for the unirradiated condition, while the values were slightly higher at 420 and 450 °C. This behavior is consistent with the Nelson-Hudson-Mazey rate theory model that considers the competing effects between recombination and dissolution. An increase in the Y/Ti ratio of the YTiO particles was observed at the two lower temperatures. The formation of Cr-rich precipitates (a') was observed in specimens irradiated at temperatures up to 450 °C. Irradiation-induced segregation on grain boundaries was also investigated. Grain boundary element concentration profiles and ion maps demonstrate differences among the irradiation temperatures, with most datasets differing from the unirradiated condition. A key focus of this ion irradiation study is the high-dose response, and this quantitative assessment revealed relatively small but distinct effects of irradiation on microstructure evolution. Overall, these results showing minor second phase evolution suggest that MA957 should retain mechanical performance generally well up to 500 dpa for the irradiation temperatures studied.

Wang, Jing↗
DOE OSTI2026

Combustion-assisted ink-jet printing of nuclear targets

Advances in target fabrication are critical to high-precision measurements in nuclear physics. This work details the preparation of patterned CeO 2 and ThO 2 architectures and thin-film targets via ink-jet deposition of combustible solutions. The produced targets were characterized by scanning electron microscopy (SEM), and by alpha-particle spectroscopy for radioactive targets to determine densities. Ink jet printing of the targets, used both ethanol and 2-methoxyethanol as solvents, with cerium or thorium nitrate as the oxidizer and acetylacetone as the fuel. Additionally, we found that the distance between each droplet dispersion (step size) played the most significant role in determining the final pattern uniformity and thickness. A 50 μm step size leads to relatively thick targets with a density of 350 μg/cm 2 . Significant overlap in droplet sizes leads to a heterogeneous target with an undesirable cracked surface structure. In contrast, 150 μm spacing yields thinner (20 μg/cm 2 ) patterned structures with excellent surface coverage. This method of Ink-jet printing provides a straightforward, scalable, and high-efficiency pathway to prepare custom made, high-quality targets for nuclear physics experiments.

CeO2↗
DOE OSTI2026

In-situ synchrotron X-ray investigation of phase evolution in gas atomized powder enabling manufacturing of nanoscale oxide-dispersion strengthened ferritic steels

Here, we present an investigation of Fe-14Cr-3W-0.4Y-0.4Zr-0.18Ti (wt.%) as a reduced-activation oxide-dispersion strengthened (ODS) ferritic steel, an alternative to the “14YWT” structural alloys designed for nuclear energy applications. Gas atomization reaction synthesis (GARS) was used to produce these Zr-modified powders with a non-equilibrium (metastable) phase that enable a heat treatment (delayed) route for producing nanoscale oxide-dispersion strengthening. In situ synchrotron X-ray diffraction and transmission electron microscopy were used to analyze phase evolution as a function of temperature and time, revealing formation of highly dispersed oxide nanoprecipitate phases at temperatures above those needed for powder consolidation and shaping of components. This would allow fabrication of net-shape parts using conventional powder-processing methods prior to thermal activation of a reaction producing nanocrystalline Y-(Ti, Zr)-O particles, with a size of 20 ± 7 nm. These results can inform processing of tubes, cladding, sheets, and plates for use in advanced fission and fusion reactors.

In-situ synchrotron X-ray diffraction↗
DOE OSTI2020

Sweeping potential regulated structural and chemical evolution of solid-electrolyte interphase on Cu and Li as revealed by cryo-TEM

A fundamental understanding of solid-electrolyte interphase (SEI) is paramount importance for controlling the cycling performance of rechargeable lithium metal batteries. The structural and chemical evolution of SEI with respect to electrochemical operating condition remains barely established. Here we develop a unique method for imaging the evolution of SEI formed on the Cu foil under sweeping electrochemical potential. By using cryogenic TEM imaging combined with energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy electronic structure analyses, we reveal that, for the vinylene carbonate (VC)-free electrolyte, the SEI formed at 1.0 V is a monolithic amorphous structure, which evolves to amorphous matrix embedded with Li 2 O particles as the voltage decreases to 0 V. In the case of VC-containing electrolyte, the SEI is featured by an amorphous matrix with Li 2 O particles from 1.0 V to 0 V. The thickness of SEI formed on Cu foil increases with decreasing voltage. Associated with the localized charge modulation by the surface topographic feature and defects in the Cu foil, the SEI layer shows direct spatial correlation with these structural defects in the Cu. In addition, upon Li deposition, the SEI formed on the Li metal has similar thickness with, but different composition from the SEI formed on the Cu foil at 0 V. Furthermore, those results provide insight toward SEI engineering for enhanced cycling stability of Li metal.

25 ENERGY STORAGE↗
DOE OSTI2021

Gravitational effective field theory islands, low-spin dominance, and the four-graviton amplitude

Abstract We analyze constraints from perturbative unitarity and crossing on the leading contributions of higher-dimension operators to the four-graviton amplitude in four spacetime dimensions, including constraints that follow from distinct helicity configurations. We focus on the leading-order effect due to exchange by massive degrees of freedom which makes the amplitudes of interest infrared finite. In particular, we place a bound on the coefficient of the R 3 operator that corrects the graviton three-point amplitude in terms of the R 4 coefficient. To test the constraints we obtain nontrivial effective field-theory data by computing and taking the large-mass expansion of the one-loop minimally-coupled four-graviton amplitude with massive particles up to spin 2 circulating in the loop. Remarkably, we observe that the leading EFT coefficients obtained from both string and one-loop field-theory amplitudes lie in small islands. The shape and location of the islands can be derived from the dispersive representation for the Wilson coefficients using crossing and assuming that the lowest-spin spectral densities are the largest. Our analysis suggests that the Wilson coefficients of weakly-coupled gravitational physical theories are much more constrained than indicated by bounds arising from dispersive considerations of 2 → 2 scattering. The one-loop four-graviton amplitudes used to obtain the EFT data are computed using modern amplitude methods, including generalized unitarity, supersymmetric decompositions and the double copy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Particle emission with identification from an atmospheric pressure plasma liquid interface

A conspicuous emission phenomenon of luminous particles from the liquid anode surface of an atmospheric pressure DC glow discharge is reported. The emission has been shown to occur when the plasma forms a pattern on the surface of the liquid electrolyte. Here, the spatial-temporal evolutions of the trajectories of emitted particles were studied using a high-speed imaging system. Particles were sampled in flight using a witness plate for analysis. Critical particle characteristics were examined using electron microscope technologies. The morphology of the resulting splats and compositions suggest that they are molten droplets with a great deal of structure, including evidence of nanoprecipitation. A theoretical model was employed to estimate the particle size from the measured splats, which provides a radius range within a hundred micrometers. This experiment leads to the postulation of a mechanism in which particle emission at the plasma liquid interface is likely driven by the Taylor cone effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Tomography of longitudinal phase space linearization for the generation of attosecond electron bunches

The generation of electron bunches on the attosecond timescale is important for a multitude of accelerator-based applications. Here, we report on a tomographic measurement of the (pre)linearized longitudinal phase space of a low charge 3 MeV electron bunch generated with the 1.6 cell Pegasus photoinjector for the generation of attosecond bunches. The nonlinear correlations in the longitudinal phase space induced by space charge at the photocathode, radiofrequency field curvature of the gun, and vacuum dispersion are compensated using a compact X-band linearizer. Then, the initial and compensated phase of the picosecond electron bunch is precisely reconstructed by neural network assisted tomographic reconstruction from momentum spectra at varying buncher linac phase. Finally, we combine the measured phase space shape with particle tracking simulations to show that electron bunches as short as 941 as develop downstream the beamline.

Beam control↗
DOE OSTI2024

Imaging and Analysis of Insoluble Electrorefiner Material

Throughout pyroprocessing efforts at the Hot Fuel Examination Facility (HFEF), insoluble material has accumulated in the Electrorefiner (ER) vessel. The objective of this effort was to analyze the accumulated material to determine its origin. Material was removed from the ER salt bath and distilled to remove excess salt prior to performing analysis. Three samples were sent for chemical and isotopic analysis and underwent an ethyl acetate-bromine dissolution to segregate the oxide fraction from the metal fraction. Actinide concentrations were determined using a quadrupole–inductively coupled plasma–mass spectrometer (Q-ICP-MS). Three additional samples were sent for morphologic and elemental analysis by scanning electron microscopy (SEM) with Energy Dispersive X-ray (EDX) analysis at the Irradiated Materials Characterization Laboratory (IMCL). Analyses suggest that the material is primarily composed of UO2. with a small fraction of metal. This study draws no single conclusion as to the origin of the insoluble material in the ER. The particle sizes and morphologies observed in SEM micrographs indicate that the larger particles observed may be a result of introducing material to the ER that has not been completely reduced in Oxide Reduction (OR) operations, which precede electrorefining. Smaller particles may be due to reactions with oxygen and moisture present in HFEF. This research suggests that microscopic analysis of fuel particles before and after OR operations (including after distillation) as well as the uranium product collected on the cathode in the ER would increase understanding about particle morphology within the pyrochemical process.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Performance and Commissioning of the BigBite Timing Hodoscope for Nucleon Form Factor Measurements at Jefferson Lab

The BigBite Timing Hodoscope detector is the primary subject of this thesis. The Super BigBite Spectrometer is a Jefferson Lab Hall A Collaboration project that has and will continue to measure nucleon electromagnetic form factors. This spectrometer includes the Timing Hodoscope which provides high resolution particle timing data for scattered electrons in the electron arm of BigBite. The Timing Hodoscope utilizes 90, 25 × 25 × 600 mm3 scintillator bars stacked on top of each other to form a single detector plane, and these bars are connected to 180 photo-multiplier tubes via light guides. Particles collide with the scintillating material creating a shower of optical photons and these particle events in the bars are collected to generate signals that are readout by the data acquisition (DAQ) electronics. NINO ASIC amplifier-discriminator cards output signals from the photo-multiplier tubes into analogue and logic signals, which are sent to analogue-to-digital (ADC) and time-to-digital (TDC) converter data acquisition readout modules. This data is then used for analysis of the detector. The focus of this thesis is the construction, commissioning, calibration, and performance of the BigBite Timing Hodoscope before and during the first of five nucleon electromagnetic form factor experiments at Jefferson Lab Hall A. Before the neutron magnetic form factor, G n M, experiment, cosmic ray data was collected during commissioning to confirm proper operation of the Timing Hodoscope electronics by observing the ADC and TDC data. Commissioning studies for charge normalization, gain matching, and other ADC and TDC detector data variables were performed before moving the detector into Hall A. Following installation in Hall A, several calibration studies were implemented to fine-tune the detector in preparation for use in the experiment. The calibration studies included analysis of timing cuts, TDC alignment, the time-walk effect, time difference offsets, and scintillator velocity corrections. Once the Timing Hodoscope was well-calibrated, data-taking during the experiment commenced and the beam-on-target data was used to characterize the Timing Hodoscope performance during the G n M experiment run-time. The performance analysis included studies observing energy deposit, cluster size, rates, accidentals, pile-up, tracking efficiency, position resolution, and time resolution. After application of physics cuts to ensure a data set comprised of particle tracks corresponding to elastic electrons, which is the main data of interest for measurement of G n M, the Timing Hodoscope is shown on average across all kinematic settings to have a >98% tracking efficiency, a position resolution of 4-6 cm in the non-dispersive plane and 1.5-2 cm in the dispersive plane, and a time resolution of 500-750 ps. These performance results are compared to a GEANT4 based performance simulation of the BigBite Timing Hodoscope for reference, showing to what degree the measured performance values match those taken from the simulation.

Marinaro, Ralph↗