Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Comparative Analysis of Static and Dynamic Probabilistic Risk Assessment

Implementation of risk-informed design allows the design team to thoroughly explore the risks of a system while iterating the operations concept, design, and requirements until the system meets mission objects and is achievable within constraints. To arrive at a space system design that is likely to meet all constraints placed upon mass, cost, performance and risk, the system requirements must be understood and traded against each other as early as the conceptual design phase. Depending on the project phase and the goals of the risk analysis, various PRA methodologies could be used to produce quantitative risk estimates to enable such a process. In order to better understand the applicability, advantages, and limitations of various PRA methodologies, a comparative analysis of three bottom-up, component-based PRA approaches was performed. The three methods examined are a traditional static fault tree, a fault tree hybrid, and a dynamic Monte Carlo simulation. Each approach was used to assess a generic reaction control system (RCS) thruster pod and mission. The methods are assessed in terms of the process of modeling a system, the actionable information produced for the design team, and the overall fidelity of the quantitative risk evaluation generated. The paper also discusses the applicability of each methodology to the different phases of system development.

Probablistic↗
NASA NTRS2018

Challenges and Opportunities for Subsonic Transport X-Plane Acoustic Flight Research

Aircraft system noise aspects of experimental aircraft acoustic flight research are analyzed. Experimental aircraft are seen as a key development step toward the introduction of a full scale low noise subsonic transport in the future, especially when considering an unconventional aircraft configuration integrating a range of advanced noise reduction technologies. Possible design scenarios for an experimental aircraft are considered where the scale of the experimental aircraft relative to the future, full scale aircraft is likely a major cost driver. Aircraft system noise predictions are presented for a NASA modeled Mid- Fuselage Nacelle subsonic transport concept. The predictions are made for the total airframe system noise at 100, 50, 25, and 12.5% scale of the full scale, future version of the concept, both without and then with a set of noise reduction technologies. The noise reduction technologies include the dual use fairing of the Krueger flap, the continuous mold line for the trailing edge high lift flap, and the pod gear concept for the main gear. The predictions are treated as simulations of flight test measurements of an experimental aircraft that are then processed to full scale as flight data would be. The analysis shows that the combined impact of frequency shift, atmospheric absorption, and background noise cutoff is to establish a realistic upper limit on useful frequency from the experimental aircraft noise. The implications for instrumentation requirements are also noted for high frequency, as well as for the challenge of identifying sources that are reduced significantly by the proposed noise reduction technologies. For the experimental acoustic flight research to be most useful for the objectives of improving the prediction of the future full scale aircraft, it is indicated that the scale should be above 75%. As the demonstrator scale approaches 50%, the limitations become more severe for direct impact to the prediction of the full scale future concept.

Thomas, Russell H.↗
NASA NTRS2019

Advanced Air Transport Technology (AATT)

The NASA Advanced Air Transport Technology (AATT) Project is advancing commercial subsonic technologies to meet future aviation economic and environmental goals. Part of the portfolio is focused on podded and integrated fan technology advancement. The AATT is discussing potential collaboration opportunities in the fan technology area with DLR (German Aerospace Center). This presentation will be used to facilitate these discussions.

Wadel, Mary↗
NASA NTRS2019

Geostationary Lightning Mapper Flash Characteristics of Electrified Snowfall Events

This study examines characteristics of lightning in snowfall events (i.e., thundersnow, 20 TSSN) from the perspective of the Geostationary Lightning Mapper (GLM) and the National Environmental Satellite Data and Information Service (NESDIS) merged Snowfall Rate (mSFR) product. A thundersnow detection algorithm (TDA) was derived from the GLM and mSFR which resulted in a probability of detection (POD) of 66.7% when compared to the Meteorological Terminal Air Report (METAR) reports of TSSN. However, using the TDA an additional 2,175 lightning flashes within detected snowfall were identified that were not observed by the METAR reports, indicating that TSSN has been under reported in previous literature. TSSN flashes observed by GLM have mean flash areas, durations, and total optical energy outputs of 754 km2, 402 ms, and 1,342 fJ, which are between the 50th and 99th percentile values for all flashes within the GLM field of view. A comparison with data from the National Lightning Detection Network (NLDN) indicated that the NLDN had at least one cloud or ground flash detection in 1,709 of the 2,214 flashes observed by GLM in snowfall. An average of 5.85 NLDN flashes were assigned to a single GLM flash when the NLDN flash data were constrained by the GLM flash duration and spatial footprint. Statistically significant (p<0.01) differences in flash area and flash energy were found between flashes that were observed by the NLDN and those that were not. Additionally, when GLM was combined with the NLDN, at least 11.1% of flashes involved a tall human-made object like an antenna or wind turbine.

lightning↗
NASA NTRS2019

A Study on the Use of Solid-Oxide Fuel Cells for Increased Power Generation on Small Aircraft

A growing demand for higher-power electrical equipment on aircraft is driving the exploration of alternative electrical power generation devices. “Hybrid-electric” aircraft architectures that leverage multiple or alternative power sources are also becoming more popular with rising concerns over efficiency. Fuel cells are particularly interesting as auxiliary or secondary electrical power generation devices, due to their relative efficiency and longevity, and could be used as a “power pod” for vehicles without enough on-board electrical generation capability. This paper examines the feasibility and potential value of using an externally-mounted, hybridelectric, solid-oxide fuel cell (SOFC) power system on a Class IV unmanned aerial vehicle (UAV) for the purpose of power generation in excess of the baseline electrical load. Moreover, the paper will demonstrate that a SOFC auxiliary power unit (APU) provides significant value to an aircraft by producing a relatively large amount of additional electrical power for a relatively low initial investment when compared to producing additional power by scaling the engine.

Litherland, Brandon L.↗
NASA NTRS2019

The Joint ESA/NASA Galileo/GPS Receiver Onboard the ISS – the GARISS Project

ESA and NASA conducted a joint Galileo/GPS space receiver experiment on-board the International Space Station (ISS). The objectives (Enderle 2017) of the joint project were to demonstrate the robustness of a combined Galileo/GPS waveform uploaded to NASA hardware already operating in the challenging space environment - the SCaN (Space Communications and Navigation) software defined radio (SDR) testbed (FPGA) - on-board the ISS. These activities data included the analysis of the Galileo/GPS signal and on-board Position/Velocity/Time (PVT) performance, processing of the Galileo/GPS raw data (code- and carrier phase) for Precise Orbit Determination (POD), and validate the added value of a space-borne dual GNSS receiver compared to a single-system GNSS receiver operating under the same conditions. This paper will provide a general overview of the Galileo/GPS experiment – called GARISS - on-board the ISS, describe design, test and validation and also the operations of the experiment. Further, the various analysis conducted in the con is joint project and also the results obtained will be presented with a focus on the (Precise) Orbit Determination results.

Enderle, Werner↗
NASA NTRS2019

Far Term Noise Reduction Roadmap for the NASA D8 and Single-Aisle Tube-And-Wing Aircraft Concepts

A portfolio of noise reduction technologies is applied to two advanced single-aisle class vehicle concepts in order to evaluate the prospects for these aircraft to meet the NASA Far Term noise goals, beyond 2035. TheNASAD8 (ND8) aircraft is an unconventional configuration with boundary-layer ingesting engines mounted in the aft dorsal location. The 160-passenger tube-and-wing (TW160) aircraft is a conventional configuration with podded engines located under the wing, which represents an incremental evolution of current design philosophies. The noise reduction technologies were chosen to be compatible with each aircraft’s specific configuration requirements. The acoustic effects were predicted based on experimental and numerical studies, andwere incorporated into the prediction of total system noise usingNASA’s research-level Aircraft NOise Prediction Program (ANOPP-Research). Results suggest that the unfavorable Propulsion Airframe Aeroacoustic (PAA) effects of the two aircraft considered here significantly limit their prospects of meeting NASA’s Far Term noise goal, and that further development of the technology portfolio is key to ensuring future success in addressing the noise challenges for single-aisle class vehicles.

Clark, Ian A.↗
NASA NTRSDate not supplied

Should Astronauts throw out their Trash? And if so, How?

We don’t think much about taking out the trash on Earth, but in space, it requires some thought. Should it even be thrown overboard? Besides the implications of littering in space, there are also practical considerations of whether waste materials can be reused for other purposes onboard or do they reduce mission efficiency. In a previous study, gasifying and venting trash along the way to Mars was found to noticeably reduce propellant needs and launch mass of the spacecraft, whereas keeping processed trash on board in the form of radiation shielding tiles would significantly lower the crew’s radiation dose during a solar particle event. The latest human exploration mission proposals will be considered with an eye toward answering the questions, “Should Astronauts throw out their Trash?” and “If so, what is the best way?” Besides reviewing the propulsion and radiation shielding aspects of the question, equivalent system mass factors of mass, power, volume, and crew time, as well as human factors, like smell, will be studied. Disposal options include jettison of an entire module containing waste, regular disposal of trash via an airlock, or gasifying waste products for easier disposal or reuse. Jettison via an airlock could take many forms, from “taking out the trash” on a spacewalk to launching trash tiles or pods with different mechanisms. Likewise, the “trash-to-gas” concept, which would allow for overboard venting via a pipe, has many thermochemical processes to choose from, each with their own pros and cons. Unraveling these various tradeoff studies is the goal of this paper.

trash↗
NASA NTRSDate not supplied

Weather Guidance for UAS Urban Medical Transport Missions

Unmanned aircraft will revolutionize healthcare services by providing efficient and expeditious delivery of life-saving transplant organs and supplies to hospitals in urban environments, where road traffic and congestion can slow delivery times and endanger lives. Bell has developed the Autonomous Pod Transport (APT) vehicle to serve this market, with entry into service in mid-2020s. Adverse weather conditions can introduce risks and inefficiencies in urban environments leading to flight delays and cancellations. In 2018, National Aeronautics and Space Administration (NASA) and Bell entered into a cooperative agreement, under the Systems Integration and Operationalization (SIO) program to tackle key challenges to enable future commercial unmanned aircraft operations. The Center for Collaborative Adaptive Sensing of the Atmosphere (CASA) at the University of Massachusetts, Amherst, joined this team to demonstrate weather avoidance technologies for remotely piloted and autonomous vehicles. CASA has developed the ‘City Warn’ hazard alerting platform to gather weather information from various weather sensors and models, and based on user (or mission) preferences for alerting and on user (or unmanned aircraft) locations, the platform shares timely weather intelligence with users and the systems used by them for remote operations. This presentation discusses the weather avoidance solution developed during this project, leading up to the demonstration of the end-to-end system in Fall 2020. The presentation will cover the following topics: 1) goals related to weather avoidance 2) the design requirements process, including the results of pilot interviews, 3) weather observation and avoidance needs 4) selection of regional and national weather data sets 5) design of the weather graphical interface and 6) considerations for real-time weather alerting. The end-to-end system that was developed will be discussed, along with the results from the demonstration flight. The presentation will conclude with insights from the project team on lessons learned and best practices on weather avoidance technologies for the industry going ahead.

weather avoidance↗
NASA NTRS2021

Weather Guidance for UAS Urban Medical Transport Missions

Unmanned aircraft will revolutionize healthcare services by providing efficient and expeditious delivery of life-saving transplant organs and supplies to hospitals in urban environments, where road traffic and congestion can slow delivery times and endanger lives. Bell has developed the Autonomous Pod Transport (APT) vehicle to serve this market, with entry into service in mid-2020s. Adverse weather conditions can introduce risks and inefficiencies in urban environments leading to flight delays and cancellations. In 2018, National Aeronautics and Space Administration (NASA) and Bell entered into a cooperative agreement, under the Systems Integration and Operationalization (SIO) program to tackle key challenges to enable future commercial unmanned aircraft operations. The Center for Collaborative Adaptive Sensing of the Atmosphere (CASA) at the University of Massachusetts, Amherst, joined this team to demonstrate weather avoidance technologies for remotely piloted and autonomous vehicles. CASA has developed the ‘City Warn’ hazard alerting platform to gather weather information from various weather sensors and models, and based on user (or mission) preferences for alerting and on user (or unmanned aircraft) locations, the platform shares timely weather intelligence with users and the systems used by them for remote operations. This presentation discusses the weather avoidance solution developed during this project, leading up to the demonstration of the end-to-end system in Fall 2020. The presentation will cover the following topics: 1) goals related to weather avoidance 2) the design requirements process, including the results of pilot interviews, 3) weather observation and avoidance needs 4) selection of regional and national weather data sets 5) design of the weather graphical interface and 6) considerations for real-time weather alerting. The end-to-end system that was developed will be discussed, along with the results from the demonstration flight. The presentation will conclude with insights from the project team on lessons learned and best practices on weather avoidance technologies for the industry going ahead.

weather avoidance↗
NASA NTRS2001

Precise orbit determination for CHAMP using GPS data from BlackJack Receiver

In this paper we present results for CHAMP POD using the precise GPS measurements collected by the BlackJack receiver through the up-looking antenna. We will describe the quality of the tracking data, the tuning of the reduced-dynamic model for the 400-km orbit, and the various methods of evaluating the orbit accuracy.

CHAMP↗
NASA NTRS2019

Probability Index of Low Stratus and Fog at Dawn using Dual Geostationary Satellite Observations from COMS and FY-2D near the Korean Peninsula

We developed a new remote sensing method for detecting low stratus and fog (LSF) at dawn in terms of probability index (PI) of LSF from simultaneous stereo observations of two geostationary-orbit satellites; the Korean Communication, Ocean, and Meteorological Satellite (COMS; 128.2°E); and the Chinese FengYun satellite (FY-2D; 86.5°E). The algorithm was validated near the Korean Peninsula between the months of April and August from April 2012 to June 2015, by using surface observations at 45 meteorological stations in South Korea. The optical features of LSF were estimated by using satellite retrievals and simulated data from the radiative transfer model. The PI was calculated using the combination of three satellite-observed variables: 1) the reflectance at 0.67 μm (R(0.67)) from COMS, and 2) the FY-2D R(0.67) minus the COMS R(0.67) (△R(0.67)) and (3) the FY-2D-COMS difference in the brightness temperature difference between 3.7 and 11.0 μm (ΔBTD(3.7-11)). The three variables, adopted from the top three probability of detection (POD) scores for their fog detection thresholds: △R(0.67) (0.82) > ΔBTD(3.7-11) (0.73) > R(0.67) (0.70) > BTD(3.7-11) (0.51). The LSF PI for this algorithm was significantly better in the two case studies compared to that using COMS only (i.e., R(0.67) or BTD(3.7-11)), so that this improvement was due to △R(0.67) and ΔBTD(3.7-11). Overall, PI in the LSF spatial distribution has the merits of a high detection rate, a specific probability display, and a low rate of seasonality and variability in detection accuracy. Therefore, PI would be useful for monitoring LSF in near-real-time, and to further its forecast ability, using next-generation satellites.

fog↗
NASA NTRSDate not supplied

A Markov Random Field Model for Texture-based Segmentation of Small Cracks in Thin InconelTubes

Markov random fields have been used for image segmentation since their introduction in the1980s. This work applies a method from Principal Component Thermography to enhance thecontrast in damage regions in 3D images derived from X-ray computed tomography (CT)inspections. The developed method is applied to sizing of small cracks in thin Inconel tubes designed as probability of detection (POD) samples for radiographic inspection.Misclassification errors arising from artifacts due to beam-hardening are reduced by fitting the boundary of the segmented damage region with the arc of an ellipse. Results are comparedagainst those obtained through manual inspection.

Image segmentation↗
NASA NTRS2022

A Global Evaluation of IMERG Precipitation Occurrence Using SMAP Detected Soil Moisture Change

A globally consistent ground validation method for remotely sensed precipitation products is crucial for building confidence in these products. This study develops a new methodology to validate the IMERG precipitation products through the use of SMAP soil moisture changes as a proxy for precipitation occurrence. Using a standard 2x2 contingency table method, preliminary results provide confidence in SMAP’s ability to be utilized as a validation tool for IMERG as results are comparable to previous validation studies. However, the method allows for an overestimate of false alarm frequency due to light precipitation events that can evaporate before the subsequent SMAP overpass and changes in overpass-to-overpass SMAP soil moisture that are within the range of SMAP uncertainty. To counter these issues, a 3x3 contingency table is used to reduce noise and extract more signal from the detection method. Through the use of this novel approach, the validation method produces a global mean POD of 0.64 and global mean FAR of 0.40, the first global-scale ground validation skill scores for the IMERG products. Advancing the method to validate precipitation quantity and the development of a real-time validation for the IMERG Early product are the crucial next developments.

Precipitation↗
NASA NTRSDate not supplied

Overview and Performance Characterization of Northrop Grumman’s 1 kW Hall Thruster String

Northrop Grumman (NG) Tactical Space SystemsDivisionhas embarked on the development and qualification of a high throughput, low power Hall Thruster String (HTS) using hardware designed and built in-house.Following the success of Mission Extension Vehicles 1 and 2, NG is currently developing the next generation in its lineupof satellite servicing capabilities, the Mission Robotics Vehicle(MRV)and Mission Extension Pod (MEP).MEP’s mission profile imposes highly demanding requirements upon the electric propulsion system. When surveying the industry for available systems, NGwas unable to identify any mature Hall thrustersystems that could satisfy the performance and lifetime requirements for MEP. Eventually, it was decided to vertically integrate the EP development process, partneringwith NASA Glenn Research Center to leverage ongoing development at GRC of a high throughput, low power Hall thruster. The components of the HTS have successfully passed PDR and are currently in the engineering development and test phase. Based on performancecharacterization testingof the development hardware,NG’s low power Hall thruster, dubbed the NGHT-1X, promises to deliver state-of-the-art performanceand lifetime for a sub-kW Hall thruster, achieving total efficiencies of 50-55% over a wide range of throttle conditions. Results of a seriesof characterization tests including integrated systems testingwith the PPUare presented.Qualification methodology andthruster lifetime verification is also discussed. Environmental qualification of the HTS components is expected to completein mid-2023 with a first flight in mid-2024.

Propulsion↗
NASA NTRSDate not supplied

Distribution of SLS Integrated Load Uncertainty to Surface Pressures and Sectional Loads

Aerodynamic loads that are important to launch vehicle programs such as NASA’s Space Launch System (SLS) include both integrated loads such as the force & moment on the entire vehicle and distributed loads. In this work two examples of distributed loads are considered: the pressure field on the surface of the vehicle and sectional loads, which are one-dimensional distributions along the axis of the launch vehicle. In some modern flight programs, the integrated loads, such as lift and drag, used to design the guidance and control laws for the vehicle come from wind tunnel testing, while distributed loads are produced using Computational Fluid Dynamics(CFD). The first task that is addressed in this paper, then, is to provide a formal method to adjust the distributed loads so that integrating them matches the prescribed integrated load. In addition, the integrated loads in a launch vehicle typically include an uncertainty estimate. The second task is to distribute this prescribed integrated uncertainty to each point in a distributed load. Both tasks are addressed using the same technique, which is to create distributed load profiles that isolate adjustments to one integrated load while leaving the others unaffected. These adjustments are informed by Proper Orthogonal Decomposition (POD) of the entire CFD-based distributed load database. Once applied, the adjusted distributed loads can be used to evaluate any scalar quantity of interest that might be needed by downstream users such as structural analysis or trajectory modelers.

SLS↗
NASA NTRS2022

The Mass Change Designated Observable Study: Overview and Results

The 2017–2027 United States National Academy of Sciences Decadal Survey (DS) for Earth Science and Applications from Space identified Mass Change (MC) as one of five Designated Observables (DOs) having the highest priority in terms of Earth observations required to advance Earth system science over the next decade. In response to this designation, NASA initiated several multi-center studies, with the goal of recommending observing system architectures for each DO for implementation within this decade. This paper provides an overview of the Mass Change Designated Observable (MCDO) Study along with key findings. The study process included: (a) generation of a Science and Applications Traceability Matrix (SATM) that maps required measurement parameters to the DS Science and Applications Objectives; (b) identification of three architecture classes relevant for measuring mass change: Precise Orbit Determination (POD), Satellite-Satellite-Tracking (SST) and Gravity Gradiometry (GG), along with variants within each architecture class; and (c) creation of a Value Framework process that considers science value, cost, risk, schedule, and partnership opportunities, to identify and recommend high value observing systems for further in-depth study. The study team recommended the implementation of an SST architecture, and identified variants that simultaneously (a) satisfy the baseline measurement parameters of the SATM; (b) maximize the probability of providing overlap with the Gravity Recovery and Climate Experiment Follow-On (GRACE-FO) mission currently in operation, accelerating science return from both missions; and (c) provide a pathway towards substantial improvements in resolution and accuracy of mass change data products relative to the program of record.

D N Wiese↗
NASA NTRSDate not supplied

Preliminary Assessment of a Distributed Electric Propulsion System for the SUSAN Electrofan

The SUSAN Electrofan is a new hybrid electric large regional jet aircraft concept being studied by NASA that leverages advanced propulsion system technologies such as distributed electric propulsion (DEP) and boundary-layer ingestion (BLI) to reduce fuel consumption and emissions. In order to evaluate the individual benefits of these technologies toward the SUSAN Electrofan’s wing-mounted propulsion systems, three configurations are proposed. The first consists of two underwing pylon-mounted podded propulsors and serves as a baseline, while the second features an underwing pylon-mounted DEP concept with 16 ducted fans in a mail-slot nacelle. The third and final configuration mounts the mail-slot nacelle directly onto the pressure side of the wing to also take advantage of BLI. This paper presents preliminary investigations into the design and performance of the first two propulsion system configurations. This begins with an initial propulsor and mail-slot design where the aeropropulsive design space is explored, and adverse effects are addressed through iterative geometry modifications. The propulsion system configurations are then installed onto a wing–body model to account for integration effects and assess the relative aerodynamic and shaft power performance of each concept. Results indicate the potential benefits of DEP, which come from significant reductions in total drag, provided by operation at much lower propulsor fan pressure ratios.

ARMD↗