Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA POTENTIAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Direct measurement of the plasma screening length and surface potential near the lunar terminator

Direct measurement of the lunar dayside surface potential and screening length has been made by the suprathermal ion detector experiment (Side) near the terminator. In a region 20-30 deg from the terminator at the Apollo 14 and 15 sites the surface potential is found to be approximately 50 V negative, and the screening length to be about 1 km. This value of the screening length is more than 2 orders of magnitude greater than the solar wind 'Debye' length. The strong negative surface potential in this region may be due to enhanced temperature and density of the solar wind plasma.

Benson, J.↗

Dynamical properties of non-ideal plasma on the basis of effective potentials

In this work, stopping power has been calculated on the basis of the Coulomb logarithm using the effective potentials. Calculations of the Coulomb logarithm and stopping power for different interaction potentials and degrees of ionization are compared. The comparison with the data of other theoretical and experimental works was carried out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rotation Driven by Rectified RF-sheath Potentials and Spatial Dispersion

Plasma rotation is of interest for improving confinement and stabilising plasma. Effects from fast particles with broad orbits can only partly explain the changes in the rotation profiles during ICRH. The effect on wave-particle interaction of a finite poloidal mode number is discussed and two new RF-mechanisms are proposed: Co-current torque caused by sputtering by rectified RF-sheath potentials and transport of momentum due to spatial dispersion. The latter effect affects the RF-current drive, in particular, in conjunction with mode conversion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Massive, long-lived electrostatic potentials in a rotating mirror plasma

Abstract Hot plasma is highly conductive in the direction parallel to a magnetic field. This often means that the electrical potential will be nearly constant along any given field line. When this is the case, the cross-field voltage drops in open-field-line magnetic confinement devices are limited by the tolerances of the solid materials wherever the field lines impinge on the plasma-facing components. To circumvent this voltage limitation, it is proposed to arrange large voltage drops in the interior of a device, but coexist with much smaller drops on the boundaries. To avoid prohibitively large dissipation requires both preventing substantial drift-flow shear within flux surfaces and preventing large parallel electric fields from driving large parallel currents. It is demonstrated here that both requirements can be met simultaneously, which opens up the possibility for magnetized plasma tolerating steady-state voltage drops far larger than what might be tolerated in material media.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental breakdown of selected anodized aluminum samples in dilute plasmas

Anodized aluminum samples representative of Space Station Freedom structural material were tested for electrical breakdown under space plasma conditions. In space, this potential arises across the insulating anodized coating when the spacecraft structure is driven to a negative bias relative to the external plasma potential due to plasma-surface interaction phenomena. For anodized materials used in the tests, it was found that breakdown voltage varied from 100 to 2000 volts depending on the sample. The current in the arcs depended on the sample, the capacitor, and the voltage. The level of the arc currents varied from 60 to 1000 amperes. The plasma number density varied from 3 x 10 exp 6 to 10 exp 3 ions per cc. The time between arcs increased as the number density was lowered. Corona testing of anodized samples revealed that samples with higher corona inception voltage had higher arcing inception voltages. From this it is concluded that corona testing may provide a method of screening the samples.

Grier, Norman T.↗

SPEAR-1: An experiment to measure current collection in the ionosphere by high voltage biased conductors

An experiment is described in which a high electrical potential difference, up to 45 kV, was applied between deployed conducting spheres and a sounding rocket in the ionosphere. Measurements were made of the applied voltage and the resulting currents for each of 24 applications of different high potentials. In addition, diagnostic measurements of optical emissions in the vicinity of the spheres, energetic particle flow to the sounding rocket, dc electric field and wave data were made. The ambient plasma and neutral environments were measured by a Langmuir probe and a cold cathode neutral ionization gauge, respectively. The payload is described and examples of the measured current and voltage characteristics are presented. The characteristics of the measured currents are discussed in terms of the diagnostic measurements and the in-situ measurements of the vehicle environment. In general, it was found that the currents observed were at a level typical of magnetically limited currents from the ionospheric plasma for potentials less than 12 kV, and slightly higher for larger potentials. However, due to the failure to expose the plasma contactor, the vehicle sheath modified the sphere sheaths and made comparisons with the analytic models of Langmuir-Blodgett and Parker-Murphy less meaningful. Examples of localized enhancements of ambient gas density resulting from the operation of the attitude control system thrusters (cold nitrogen) were obtained. Current measurements and optical data indicated localized discharges due to enhanced gas density that reduced the vehicle-ionosphere impedance.

Raitt, W. John↗

Dust charging effects on test charge potential in a multi-ion dusty plasma

The Debye-Hueckel and oscillatory wake potentials caused by a test charge are studied in a multi-ion dusty plasma, whose constituents are the Boltzmann distributed electrons and light positive ions, the heavy mobile negative ions, and static but charge fluctuating dust particles. For this purpose, fluid equations are employed to obtain the dielectric constant of the dust-negative-ion acoustic wave involving the negative ions and dust charge fluctuation effects. Theoretical and numerical investigations have revealed the modification in the Debye-Hueckel and wake potentials due to the effects of dust relaxation rate, dust absorption frequency, dust grain radius, and negative ion temperature. The present results should be important to form new materials in the presence of negative ions in laboratory as well as dust coagulation/agglomeration in space dusty plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Novel Spacecraft Charge Monitor for LEO

Five years ago we introduced a new method for measuring spacecraft chassis floating potential relative to the space plasma (absolute spacecraft potential) in low Earth orbit. The method, based on a straightforward interpretation of photoelectron spectra, shows promise for numerous applications, but has not yet been tried. In the interest of testing the method, and ultimately supplying another tool for measuring absolute spacecraft charge, we are producing a flight prototype Spacecraft Charge Monitor (SCM) with support from NASA's Small Business Innovation Research (SBIR) program. Although insight into the technique came from data collected in space over two decades ago, very little data are available. The data indicate that it may be possible to determine spacecraft floating potential to within 0.1 volt each with the SCM second under certain conditions. It is debatable that spacecraft floating potential has ever been measured with such accuracy. The compact, easily deployed SCM also offers the advantage of long-term stability in calibration. Accurate floating potential determinations from the SCM could be used to correct biases in space plasma measurements and evaluate charge mitigation and/or sensing devices. Although this paper focuses on the device's use in low Earth orbit (LEO), the device may also be able to measure spacecraft charge at higher altitudes, in the solar wind, and in orbits around other planets. The flight prototype SCM we are producing for delivery to NASA in the third quarter of 2004 will measure floating potential from 0 to -150 volts with 0.1 volt precision, weigh approximately 600-700 grams, consume approximately 2 watts, and will measure approximately 8 x 10 x 17 cm.

Goembel, Luke↗

Large-amplitude electron-acoustic solitons in a dusty plasma with kappa-distributed electrons

The Sagdeev pseudopotential method is used to investigate the occurrence and the dynamics of fully nonlinear electrostatic solitary structures in a plasma containing suprathermal hot electrons, in the presence of massive charged dust particles in the background. The soliton existence domain is delineated, and its parametric dependence on different physical parameters is clarified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magneto Inertial Fusion Plasma Target Collaboration: CRADA Final Report

The Participant and Los Alamos National Laboratory (LANL) investigated possible paths for compression of plasma targets in Magneto Inertial Fusion (MIF) regimes. MIF involves the addition of a magnetic field to Inertial Fusion type plasma targets, potentially improving energy confinement. This technique could reduce the power, precision, and cost required to compress and heat plasma targets to fusion relevant conditions, leading to a lower cost path to a fusion energy source. MIF regimes are intermediate between magnetic fusion energy and inertial fusion energy approaches. LANL is pursuing the creation of a MIF compatible magnetized plasma target with long enough lifetime to compress it inside a solid cylindrical, flux-conserving shell. The Participant also requires a similar plasma target for use with a novel acoustic wave compression scheme.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stable p-i-n FAPbBr 3 devices with improved efficiency using sputtered ZnO as electron transport layer [Stable p-i-n FAPbBr 3 devices with improved efficiency using sputtered inorganic electron transport layer]

Here, radio-frequency magnetron sputtering is demonstrated as an effective tool to deposit highly crystalline thin zinc oxide (ZnO) layer directly on perovskite absorber as an electron transport layer (ETL). As an absorber, formamidinium lead tribromide (FAPbBr 3 ) is fabricated through a modified single-step solution process using hydrogen bromide (HBr) as an additive resulting in complete surface coverage and highly crystalline material. A planar p-i-n device architecture with spin-coated poly-(3,4-ethylenedioxythiophene):poly-styrenesulfonic acid (PEDOT:PSS) as hole transport material (HTM) and sputtered ZnO as ETL results in a short circuit current density of 9.5 mA cm -2 and an open circuit potential of 1.19 V. Numerical simulations are performed to validate the underlying loss mechanisms. The use of phenyl C 60 butyric acid methyl ester (PCBM) interface layer between FAPbBr 3 and sputter-coated ZnO offers shielding from potential plasma-related interface damage. The modified interface results in a better device efficiency of 8.3% with an open circuit potential of 1.35 V. Such devices offer better stability under continuous illumination under ambient conditions in comparison with the conventional organic ETL (PCBM)-based devices.

14 SOLAR ENERGY↗

Promise of nonthermal plasmas in addressing emerging environmental and health problems: Present and future

Nonthermal atmospheric pressure plasmas transform input electrical energy efficiently into reactive species, charged particles, and photons. This “activated gas” is being investigated as solutions for a range of environmental and health problems facing society today. In this Perspective, we take a cursory look at a few of these societal problems and the reflected role that plasmas may play in charting the pathway to a solution buoyed by supporting research. Here, we survey the plasma-based opportunities in the removal of trace contaminants in water supporting methodologies such as water reuse, which addresses scarcity and pollution, the opportunity posed by plasmas-based chemical depolymerization for plastics recycling, and the application of plasmas for food security, which includes sterilization of foodstuffs and the improvement of crop yield. Finally, we also included a short review on how plasmas may help control disease spread. In each case, the scope of the problem is presented along with the potential plasma-based solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CORONAL PROPERTIES OF THE SEYFERT 1.9 GALAXY MCG-05-23-016 DETERMINED FROM HARD X-RAY SPECTROSCOPY WITH NuSTAR

Measurements of the high-energy cut-off in the coronal continuum of active galactic nuclei have long been elusive for all but a small number of the brightest examples. We present a direct measurement of the cut-off energy in the nuclear continuum of the nearby Seyfert 1.9 galaxy MCG-05-23-016 with unprecedented precision. The high sensitivity of NuSTAR up to 79 keV allows us to clearly disentangle the spectral curvature of the primary continuum from that of its reflection component. Using a simple phenomenological model for the hard X-ray spectrum, we constrain the cut-off energy to 116{sub −5}{sup +6} keV with 90% confidence. Testing for more complex models and nuisance parameters that could potentially influence the measurement, we find that the cut-off is detected robustly. We further use simple Comptonized plasma models to provide independent constraints for both the kinetic temperature of the electrons in the corona and its optical depth. At the 90% confidence level, we find kT{sub e} = 29 ± 2 keV and τ {sub e} = 1.23 ± 0.08 assuming a slab (disk-like) geometry, and kT{sub e} = 25 ± 2 keV and τ {sub e} = 3.5 ± 0.2 assuming a spherical geometry. Both geometries are found to fit the data equally well and their two principal physical parameters are correlated in both cases. With the optical depth in the τ {sub e} ≳ 1 regime, the data are pushing the currently available theoretical models of the Comptonized plasma to the limits of their validity. Since the spectral features and variability arising from the inner accretion disk have been observed previously in MCG-05-23-016, the inferred high optical depth implies that a spherical or disk-like corona cannot be homogeneous.

79 ASTRONOMY AND ASTROPHYSICS↗

Classical interatomic potential model for Si/H/Br systems and its application to atomistic Si etching simulation by HBr{sup +}

An interatomic potential model for Si/H/Br systems has been developed for performing classical molecular dynamics simulations of Si etching processes by HBr plasmas. The potential form used here is the improved Stillinger-Weber potential function involving a correction term in order to predict the reaction dynamics more accurately. Parameters were determined based on ab initio data obtained from previous works on Si/Br systems by [Ohta et al. J. Appl. Phys. 104, 073302 (2008)]. By using this model, we performed Si etching simulations by monoenergetic HBr{sup +} and Br{sup +} beams. H atom has about 1% of the translational energy of cluster ions due to the small H/Br mass ratio (=1.0/79.9); therefore, H atoms in HBr{sup +} behave like H radicals. This results in higher etch yields by HBr{sup +} than those by Br{sup +} in the low-energy region (less than 100 eV). This can be attributed to the chemical enhancement induced by the formation of Si-H bonds. On the other hand, yields by HBr{sup +} and Br{sup +} were almost the same in the high-energy region (more than 100 eV), where physical sputtering was relatively dominant and the contribution of H was small.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of pair interaction potential of particles in nonideal dissipative systems

A new method is proposed for reconstructing physical characteristics of nonideal systems by solving of an inverse problem in which the motion of interacting particles is described by a set of Langevin equations. The method allows one to simultaneously determine the interaction potential between dust grains, the friction coefficients, and the external confining potential. The method was verified by solving the problem numerically in a wide range of parameters typical of laboratory dusty plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Test charge potential in the presence of electron acoustic waves in multispecies dusty plasma

An expression for the test charge potential is obtained in a multispecies dusty plasma, whose constituents are the Boltzmann distributed hot electrons, mobile cold electrons, immobile cold ions, and charge fluctuating isolated dust grains. The plasma response function involving the electron-acoustic waves becomes modified due to the inclusion of the dust-charge perturbations. The analytical and numerical investigations reveal that the Debye-Hueckel screening and wakefield potentials are significantly affected by the plasma parameters such as the equilibrium dust number density, the dust grain radius, and the hot electron temperature. The relevance of the results to laboratory plasma, where the two distinct groups of electrons exist besides the static ions and isolated dust grains, is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗