Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PH VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

A Novel Eco-Biosorbent for Decontamination of Hazardous Dye from Aqueous Medium

A novel multi-component biosorbent consisted of pine, oak, hornbeam and fir sawdust biomasses was used to eliminate a common hazardous dye (Malachite green, MG) from aqueous solution. The influences of different parameters like solution pH, biosorbent amount, dye concentration and contact time on the removal process were thoroughly studied to evaluate optimum biosorption conditions. The pseudo-first-order, pseudo-second-order, Elovich, logistic and intra-particle diffusion models were used to describe the biosorption kinetics. Logistic model represented the kinetic experimental data well. The experimental equilibrium biosorption data were analyzed by Freundlich, Langmuir and Dubinin–Radushkevich isotherms. Freundlich model fitted better with the experimental data compared to others. In addition, the mean free energy obtained from Dubinin–Radushkevich model and the standard Gibbs free energy change indicated that the nature of biosorption was feasible, spontaneous and physical type. Overall, the novel eco-biosorbent could be used as a promising biosorbent to remove such unsafe dye molecules from aqueous environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recovery of Chromium(III) from Tannery Wastewater by Nanoparticles and Whiskers of Chitosan

Chitosan, its nanoparticles and whiskers present an excellent capacity to complex chromium ions. However, this phenomenon is influenced by different parameters. In our search, we determined the appropriate range of pH to form chitosan–Cr(III), nanoparticles Cr(III) and whiskers–Cr(III) complex. We studied also the influence of chromium concentration and nature of chitosan-based materials on complexation process. Our main aim is approximate the optimal conditions to remove chromium(III) from tanning bath, recuperated from tannery wastewater of Marrakech in Morocco. However, the results of adsorption kinetic in tannery wastewater revealed that chitosan, its nanoparticles, whiskers and biocomposites are good sorbent of chromium as well, even if the adsorbed quantity is less compared to chromium solution. Although, according to ICP-OES analysis in this real effluent, nanoparticles are the best complexing ligand, after 24 h of contact nanoparticles can remove 70% of chromium from this tannery wastewater.

54 ENVIRONMENTAL SCIENCES↗

Fabrication of Biodegradable Superabsorbent Using RSM Design for Controlled Release of KNO{sub 3}

Present study envisaged the sequential experimental design approach for the development of biodegradable Gelatin-Tapoica/polyacrylamide superabsorbent. Percentage water uptake efficacy of candidate sample was optimized using Response Surface Methodology (RSM) design under microwave irradiation. Different process variables such as potassium persulphate and ammonium persulphate (KPS:APS) ratio, pH, reaction time concentration of acrylamide and N,N-methylene-bis-acrylamide (MBA) were investigated as a function of percentage swelling using sequential experimental design. Maximum liquid efficacy of 1550% was obtained at KPS:APS = 1.0:0.5; acrylamide = 7.67 × 10{sup −1} mol L{sup −1}; MBA = 1.76 × 10{sup −2} mol L{sup −1}; pH 10 and time = 110 s. The 3D crosslinked network formed was characterized using Fourier Transformation Infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning Electron Microscopic (SEM) techniques and thermal stability was ensured by Thermal gravimetric Analysis/Differential Thermal Analysis/Differential Thermal Gravimetric (TGA/DTA/DTG) studies. Superabsorbent synthesized could increase the moisture content in different type of soils and was found to enhance the water-holding capability of the soil upto 60 days in clayey, 40 days in sandy and 51 days in mixture of two soils under controlled conditions. Further, candidate polymer was investigated for the in-vitro controlled release of the KNO{sub 3} with diffusion exponent ‘n’ was found to be 0.4326 indicating Fickian type diffusion. Also, initial diffusion coefficient (D{sub I} = 3.49 × 10{sup −5} m{sup 2} h{sup −1}) was found to be greater than the lateral diffusion coefficient (D{sub L} = 3.76 × 10{sup −6} m{sup 2} h{sup −1}) indicated rapid release of KNO{sub 3} during initial hours with slow release afterwards. The ecofriendly nature of the synthesized polymer was also tested by conducting biodegradation studies and it was found to degrade upto 94% and 88.1% within 70 days with degradation rate of 1.34 and 1.26% per day using composting method and vermicomposting method respectively. So, the synthesized candidate polymer was found to be boon for agriculture-horticulture sector with wide applicability.

36 MATERIALS SCIENCE↗

Preparation and Characterization of New Environmental Functional Polymers Based on Vanillin and N-isopropylacrylamide for Post Polymerization

The study aims to synthetize a new functional acrylate monomer from vanillin in one step reaction. The new monomer has called by vanillin acrylate and abbreviated (VA). It was confirmed by chemical methods 1H NMR, 13C, IR and UV indicated logic results. The homopolymer has been prepared by free radical polymerization and characterized chemically and physically, the {sup 1}HNMR and IR have proofed the presence of aldehyde group in the polymer main chain. This monomer was used to synthesize three different molar concentrations of temperature responsive functional polymers with N-isopropylacrylamide via free radical polymerization by AIBN in solution. The {sup 1}H NMR was used for determination of actual mole concentration of each monomer. The aldehyde group in polymers were used as a linker for grafting with primary amine compounds by click reactions to form Schiff’s base imine compounds. The grafted copolymers were also investigated by 1H NMR and IR for structure elucidation. Gel permeation chromatography GPC was used for determination the molecular weight and polydispersity; DSC for glass temperature of solid polymers; XRD for crystallinity. UV–Vis Spectroscopy was used for the determination of phase separation or the lower critical solution temperature (Tc) of polymers solution before and after grafting, not only in deionized water but in pH 5 and pH 11. Graphical Abstract: Synthesis of new functional monomer based on vanillin in one step reaction. Monomer has been successfully polymerized by free radical polymerization using AIBN as initiator. Three different mole ratios (10, 15, 20 mol%) of copolymer with NIPAAm were prepared. All monomers and polymers have been chemically elucidated. The aldehyde functional group used as linker for primary amine compounds, the final products have been characteristics as T, pH dual responsive polymers the phase transition temperature of copolymer before and after grafting was determined by UV.vis Spectroscopy. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploration of the Effect of Chitosan and Crosslinking Agent Concentration on the Properties of Dual Responsive Chitosan-g-Poly (N-Isopropylacrylamide) Co-polymeric Particles

The objective of the present study was to synthesize and evaluate the effect of change in concentration of chitosan (CS) and N,N-methylenebisacrylamide (MBA)- a cross linking agent, on various properties such as lower critical solution temperature (LCST), zeta potential, particle size and poly dispersity index (PDI) of the synthesized co-polymer. Nine different formulations of chitosan-g-poly (N-isopropylacrylamide) (CS-g-PNIPAAm) co-polymer with varying CS and MBA concentrations were synthesized by a surfactant free dispersion copolymerization method. The synthesized co-polymer was further characterized and confirmed for its structure, morphology, particle size, zeta-potential, thermo and pH responsive properties, in-vitro cyto-compatability and stability studies using various analytical tools. The data confirms the successful synthesis of co-polymer. The increase in the concentrations of CS and MBA during the polymerization of co-polymer, resulted in proportional increase of LCST and zeta potential with decrease in particle size of co-polymeric nanoparticles. pH responsive studies showed that as the pH of the medium increases particle size and zeta potential decreases with increase in LCST of co-polymeric nanoparticles. From the results, it can be inferred that the synthesized co-polymeric nanoparticles exerted thermo and pH responsive properties with biocompatibility. By varying the CS and MBA concentrations in the co-polymer, desired LCST, particle size and zeta potential for co-polymeric nanoparticles can be obtained and thus the synthesized co-polymer may have great potential to be used as a drug carrier (nanoform) with both thermo and pH responsiveness.

36 MATERIALS SCIENCE↗

Novel Fabrication of PAA/PVA/Yeast Superabsorbent with Interpenetrating Polymer Network for pH-Dependent Selective Adsorption of Dyes

Traditional superabsorbent polymers have wide application potential as an adsorbent, but the poor physical and mechanical properties limit their further applications. To tentatively overcome this dilemma, a novel poly(acrylic acid)/poly(vinyl alcohol)/yeast superabsorbent polymers (PAA/PVA/yeast SAPs) with interpenetrating polymer networks (IPNs) were fabricated herein via solution polymerization. The mechanical stability tests showed that the resulting products could desirably resist the destruction of shear flow (<5000 rpm) and load pressure (<3 kg). The effects of yeast content, pH, contact time, initial dye concentration and temperature were systematically studied to evaluate their adsorption properties. Consecutive five cycles of adsorption–desorption indicated that their easy regeneration and reusability. More importantly, the PVA/PAA/yeast SAPs displayed brilliant pH-dependent selective adsorption for dyes in dye mixtures. It is believed hereby that the PAA/PVA/yeast SAPs can be expected to be economically and technically feasible for the scalable treatment of dyes wastewater.

36 MATERIALS SCIENCE↗

Photochemical Kinetic Modeling of Degradation of Aqueous Polyvinyl Alcohol in a UV/H{sub 2}O{sub 2} Photoreactor

This study presents a photochemical kinetics model to describe the degradation of water-soluble PVA (Polyvinyl Alcohol) polymer in a UV/H{sub 2}O{sub 2} batch reactor. Under the effect of UV light, the photolysis of hydrogen peroxide into hydroxyl radicals can generate a series of polymer scission reactions. For a better understanding and analysis of the UV/H{sub 2}O{sub 2} process in the cracking of the PVA macromolecules, a chemical reaction mechanism of the degradation process and a relevant photochemical kinetics model are developed to describe the disintegration of the polymer chains. Taking into account the probabilistic fragmentation of the polymer, the statistical moment approach is used to model the molar population balance of live and dead polymer chains. The model predicts the PVA molecular weight reduction, the acidity of the solution, and hydrogen peroxide residual. In addition to previously published data collected in this laboratory, a new set of experiments were conducted using a 500 mg/L PVA aqueous for different hydrogen peroxide/PVA ratios for model validation. Measurements of average molecular weights of the polymer, hydrogen peroxide concentrations and pH of the PVA solution were determinant factors in constructing a reliable photochemical model of the UV/H{sub 2}O{sub 2} process. Experimental data showed a decrease in the PVA molecular weight and a buildup of the solution acidity. The experimental data also served to determine the kinetics rate constants of the PVA photochemical degradation and validate the model whose predictions are in good agreement with data. The model can provide a comprehensive understanding of the impact of the design and operational variables.

36 MATERIALS SCIENCE↗

Statistical Optimization of Polyhydroxybutyrate Production by Bacillus Pumilus H9 Using Cow Dung as a Cheap Carbon Source by Response Surface Methodology

A gram positive bacterium (designated strain H9) found to be a potential polyhydroxybutyrate (biodegradable polymer) producer was isolated from the soil samples of a stress prone environment (municipal waste areas). This bacterium was identified as Bacillus pumilus H9 from its morphological, physiological and 16S rRNA gene sequence analysis. A four-factor central composite rotary design was employed to optimize the medium and to find out the interactive effects of four variables, viz. concentrations of cow dung, sucrose, peptone and pH on PHB production. Using response surface methodology, a second-order polynomial equation was obtained by multiple regression analysis and a yield of 2.47 g/L of PHB dry weight was achieved from the optimized medium at pH 7. Here, we report cow dung as a cheap carbon source for the production of PHB. Further, phbA, phbB and phbC genes were amplified by polymerase chain reaction which confirms the bacterium to be able to produce polyhydroxybutyrate.

36 MATERIALS SCIENCE↗

Functionalization of Extracellular Polymers of Pseudomonas aeruginosa N6P6 for Synthesis of CdS Nanoparticles and Cadmium Bioadsorption

Functionalization of the extracellular polymers (EPS) of a marine bacterium Pseudomonas aeruginosa N6P6 was carried out for cadmium (Cd) bioadsorption from an aqueous solution which led to the synthesis of cadmium sulfide (CdS) nanoparticles (NPs). Characterization of pristine, functionalized and Cd-treated functionalized EPS was accomplished by ATR-FTIR spectroscopy which illustrated Cd binding with the sulfhydryl (–SH) group. The XRD pattern confirmed the presence of CdS NPs on the functionalized EPS with diffraction peaks at 2θ = 27.45° and 32.66° indexed to (111) and (220) planes of cubic phase CdS. Maximum Cd adsorption was observed by the functionalized EPS which removed 88.86 ± 0.65% of Cd at pH 6.6 in 48 h. However, pristine EPS and bacterial cell biomass removed 83.61 ± 0.50% and 29.75 ± 0.73% of Cd respectively from aqueous solution. The experimental data of Cd adsorption thermodynamics by functionalized EPS fitted in Langmuir isotherm model. CdS NPs synthesis by functionalized EPS was evident by UV–Vis spectrum with a characteristic peak at 462 nm and Transmission electron microscopy with an average diameter of 8–10 nm. This work delivers an environment-friendly approach for efficient Cd removal from aqueous solution in the form of CdS NPs synthesis.

36 MATERIALS SCIENCE↗

Removal of Iron and Copper Ions from the Liquid Phase by Modified Polymeric Membranes

Preparation of polymeric membranes based on cellulose acetate and modified by adding different amounts of a pore generating agent, which was polyvinylpyrrolidone (PVP), is presented and potential application of the membranes obtained for the removal of iron and copper ions from liquid phase is examined. Addition of various amounts of PVP has an impact on the physical (porosity, equilibrium water content and permeability) and chemical (content of the surface oxygen group, pH) properties of the membranes obtained. Filtration of iron and cupper solution leads to significant changes in the total content of surface oxygen groups, however the acidic oxygen groups remain dominant. With the content of PVP increasing within a certain range, the membrane permeability is improved. The membranes obtained show higher efficiency in removal of Fe{sup 3+} than Cu{sup 2+} ions, but with increasing content of PVP the efficiency in iron ions removal decreases and the total filtration resistance decreases after filtration of iron ions solutions.

36 MATERIALS SCIENCE↗

Recovery of Kraft Lignin from OPEFB and Using for Lignin–Agarose Hydrogel

Lignins from the spent pulping liquor were normally acquired as waste product of pulp and paper mills. The possibilities of utilizing kraft lignin have yet been developed for commercial innovation. The objectives of this research are to recovery and utilization of lignin from black liquor of oil palm empty fruit bunches (OPEFBs). Kraft lignins from the OPEFBs black liquor were recovered by acidification procedure. They were precipitated at pH 4, 3, and 2 in order that determine the optimum pH for isolation. It can be clearly seen that the best condition of lignin precipitation was at pH 3. It offered the highest yield and purity. The kraft lignin and agarose were utilized as the crude material for the production of lignin–agarose hydrogel. Lignin–agarose hydrogel could be prepared by using epichlorohydrin as the cross-linking agent. The cross-linking occurrence was recognized by FTIR. Physical and chemical properties of hydrogel were investigated. Gel strength of lignin–agarose hydrogel was characterized by texture personal analysis. The results demonstrated that the gel strength increased with increasing of lignin and epichlorohydrin (ECH) in agarose solutions. 5% lignin, 5% agarose and 10 mL ECH contributed the best gel formation and the great mechanical properties. The effect of cross-linking condition on the gel properties, for example, gel hardness and fracturability, was examined.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Emulsifying and Cell Proliferative Abilities of the Exopolysaccharide Produced by Leguminous Plant Nodule Associated Bacterium Cronobacter sp

Exopolysaccharides (EPS) produced by bacteria are high molecular weight secondary metabolites having wide applications in food and pharmaceutical industry. In the present study, an exopolysaccharide producing bacterium was isolated from the root nodules of a leguminous plant and was studied for emulsification activity and biocompatibility using human dermal fibroblasts. Under optimum culture conditions, the purified EPS yield in modified YEM media was 2.8 g L{sup −1} and was identified as β-glucan with the molecular weight 15.57 × 10{sup 6} Da. The EPS showed high emulsifying activity against hydrocarbons such as petrol, kerosene, xylene, palm oil, coconut oil, and olive oil with emulsification index > 60% at 0.25 and 0.5% concentrations at 25 °C. The EPS was sensitive to high temperature, but the emulsions were stable at pH range 2–9 and in the salinity range of 1–20%. In vitro cell viability studies indicated that EPS was not cytotoxic at tested concentrations on human dermal fibroblasts moreover, it had proliferative activities. Hence, the EPS from Cronobacter sp. can be a good candidate for biotechnological application as a source of β-glucan with emulsifying and tissue regenerative properties.

60 APPLIED LIFE SCIENCES↗

Effects of Cashew Nut Shell Liquid and Its Decarboxylated Form on the Properties of Natural Rubber

Effects of addition of raw cashew nut shell liquid (CNSL) or its decarboxylated form (D-CNSL or cardanol) on curing characteristics, physical properties and temperature scanned stress relaxation were investigated. The study revealed that the CNSL containing high anacardic acid concentration acts as an acid activator and strongly affects curing behavior of NR compounds. The effective curing rate and curing efficiency, i.e., torque difference, crosslink density, and activation energy for curing, clearly increased with 2–5 phr of CNSL. Furthermore, physical properties and thermal stability also improved. However, when the acidity was removed by forming D-CNSL, the effects were totally different from those of the CNSL. The D-CNSL behaves like a plasticizer improving chain flexibility and might show dilution effects if used at a high content in the compound formulation. These effects are clearly seen in decreased curing rate and curing efficiency, together with slight losses of tensile properties, tear strength, and thermal stability, with D-CNSL addition.

36 MATERIALS SCIENCE↗

Development of Novel Biodegradable Enrofloxacin–Silica Composite for In Vitro Drug Release Kinetic Studies

A sustained drug delivery system is developed by using nonionic polymer to formulate drug release rate from silica capsules. To serve this purpose, silica capsules filled with poly(ethylene glycol) (PEG) were incorporated with a veterinary antibiotic drug enrofloxacin (ENF); as a model hydrophobic drug by using a general and facile sol–gel route. The physicochemical properties of the prepared drug-loaded composites were investigated by scanning electron microscope (SEM), nitrogen adsorption, Fourier transform infrared spectroscopy and thermal analysis (TGA). The impact of the media’s ionic strength on the drug release was evaluated over a range of 0–0.4 M to simulate the gastrointestinal feed in two physiological pH conditions. Sodium chloride was applied for ionic concentration adjustment due to its ability to salt out polymers in the midrange of the lyotropic series. Simultaneously, the drug release kinetics was evaluated by fitting experimental data to common empirical (zero-order, first order and Higuchi) and semi-empirical (Ritger–Peppas and Sahlin–Peppas) models. The drug release kinetics from capsules revealed a non-Fickian diffusion and pure relaxation-controlled release. Of these models, Sahlin–Peppas equation best fit the release data of ENF. To determine the best model, non-linear regressions were carried out.

36 MATERIALS SCIENCE↗

Development of Nanofibers Composed of Chitosan/Nylon 6 and Tannin/Nylon 6 for Effective Adsorption of Cr(VI)

In this study, novel nanofiber materials composed of chitosan/nylon 6 and tannin/nylon 6 were synthesized by the Forcespinning® method and were used as adsorbents for effective removal of chromium(VI) from aqueous solutions. The nanofibers showed similar production rates of 3.5 g h{sup −1}. The diameters of the nanofibers ranged from 100 to 800 nm. Under the experimental conditions tested, chromium(VI) adsorption was favored at pH 3 (chitosan/nylon 6 nanofibers) and pH 2 (tannin/nylon 6 nanofibers), at a temperature of 328 K. The most suitable models for description of the kinetic data were the pseudo-second order model (chitosan/nylon 6 nanofibers) and the Elovich model (tannin/nylon 6 nanofibers). For both nanofibers, the equilibrium isotherms could be fitted by the Langmuir model. The maximum adsorption capacities were 23.9 and 62.7 mg g{sup −1} for the chitosan/nylon 6 and tannin/nylon 6 nanofibers, respectively. The thermodynamic parameters showed that the adsorption was spontaneous, favorable, and endothermic. The findings indicated that these nanofibers produced using a centrifugal technique offer excellent potential as adsorbents, with high adsorption capacities for chromium(VI).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of a Novel pH-Sensitive Aluminum Crosslinked Carboxymethyl Tragacanth Beads for Extended and Enteric Drug Delivery

Carboxymethyl tragacanth (CM-TG) with a DS of 1.2 was synthesized and characterized for drug delivery using diclofenac sodium as a model drug. The mixture of CM-TG and drug was ionically crosslinked using aluminum chloride to form drug-loaded beads. The concentrations of 10 and 20% w/w solution of CM-TG were found to produce beads with acceptable qualities. The beads exhibited pH-dependent swelling. The highest swelling was observed at pH 6.8 which evidences the possibility to release the drug in the colon. FT-IR and TGA confirmed carboxymethylation of tragacanth and the absence of drug-polymer interaction. The diclofenac sodium entrapment efficiency was 30–35% while the loading varies from 4.5 to 18% w/w based upon the drug-polymer ratio. The beads could extend the drug release up to 180 min at pH 6.8. The pH-responsive CM-TG hydrogel beads are biocompatible and could be exploited as a new excipient in developing enteric release formulations.

60 APPLIED LIFE SCIENCES↗

Use of Different Proteins to Produce Biodegradable Films and Blends

The objective of this study was to develop, characterize and evaluate biodegradable films produced from different proteins and their blends. The proteins of hake (Cynoscion guatacupa), obtained by the process of pH variation, as well as gluten and zein proteins were used in this study. The hake protein films (HF) showed the highest tensile strength (TS) and solubility in water, while the gluten films (GF) presented the higher elongation at break comparing to the others. The blend (BL) produced with hake and gluten (BL H/G) showed higher TS, water vapor permeability and elongation (WVP), and lower water solubility than HF. BL H/G still showing good thermal properties and its biodegradability occurred in less than 10 days. The zein film presented more crystalline zones and less mechanical properties when compared to the others. The zein blends with gluten (BL Z/G) presented higher elongation and WVP, and lower solubility when compared to ZF. These changes indicate that the BL Z/G may be an alternative to improve the properties of individual zein films. The BL Z/G showed complete biodegradability in less than 40 days, while the zein films showed about 75% degraded in 60 days. The BL H/G presented good mechanical and thermal resistance, with ΔH superior to the other films, also showed complete biodegradability in less than 10 days, proving to be the most promising blend for the development of sustainable materials for food packaging.

60 APPLIED LIFE SCIENCES↗

Biomass Derived Antimicrobial Hybrid Cellulose Hydrogel with Green ZnO Nanoparticles for Curcumin Delivery and its Kinetic Modelling

Regenerated cellulose obtained from sugarcane bagasse was used for hydrogel preparation using epichlorohydrin (crosslinker) and green zinc oxide nanoparticles (ZNPs) which were phytosynthesised from musk melon seed extract. The synthesised ZNPs were characterised using FESEM and EDAX. The swelling capacity of the hydrogel was determined by swelling measurements. For drug delivery studies from hydrogel, curcumin was selected as the model drug for its appealing anticancer and antimicrobial activity. The presence of ZNPs and curcumin in the hybrid hydrogel was analysed using FTIR, XRD, TGA and SEM analysis. The drug loading efficiency was optimised by Taguchi method. The drug release studies were performed under varying pH and initial drug loading concentration. The kinetic studies showed the best fit with case II type of transport with polymer swelling as the drug release mechanism. Antimicrobial activity for curcumin loaded hybrid hydrogel and pure cellulose hydrogel was performed using Staphylococcus aureus (bacteria) and Trichophyton rubrum (fungi). Thus, the developed curcumin loaded biomass derived hybrid hydrogel could find potential application towards skin infective applications.

36 MATERIALS SCIENCE↗