Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PAST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Single-Event Effects Ground Testing and On-Orbit Rate Prediction Methods: The Past, Present and Future

Over the past 27 years, or so, increased concern over single event effects in spacecraft systems has resulted in research, development and engineering activities centered around a better understanding of the space radiation environment, single event effects predictive methods, ground test protocols, and test facility developments. This research has led to fairly well developed methods for assessing the impact of the space radiation environment on systems that contain SEE sensitive devices and the development of mitigation strategies either at the system or device level.

Reed, Robert A.↗

The Compressible Potential Flow Past Elliptic Symmetrical Cylinders at Zero Angle of Attack and with No Circulation

For the tunnel corrections of compressible flows those profiles are of interest for which at least the second approximation of the Janzen-Rayleigh method can be applied in closed form. One such case is presented by certain elliptical symmetrical cylinders located in the center of a tunnel with fixed walls and whose maximum velocity, incompressible, is twice the velocity of flow. In the numerical solution the maximum velocity at the profile and the tunnel wall as well as the entry of sonic velocity is computed. The velocity distribution past the contour and in the minimum cross section at various Mach numbers is illustrated on a worked out-example.

Hantzsche, W.↗

Evaluation of a Second-Order Accurate Navier-Stokes Code for Detached Eddy Simulation Past a Circular Cylinder

We evaluate the applicability of a production computational fluid dynamics code for conducting detached eddy simulation for unsteady flows. A second-order accurate Navier-Stokes code developed at NASA Langley Research Center, known as TLNS3D, is used for these simulations. We focus our attention on high Reynolds number flow (Re = 5 x 10(sup 4) - 1.4 x 10(sup 5)) past a circular cylinder to simulate flows with large-scale separations. We consider two types of flow situations: one in which the flow at the separation point is laminar, and the other in which the flow is already turbulent when it detaches from the surface of the cylinder. Solutions are presented for two- and three-dimensional calculations using both the unsteady Reynolds-averaged Navier-Stokes paradigm and the detached eddy simulation treatment. All calculations use the standard Spalart-Allmaras turbulence model as the base model.

Vatsa, Veer N.↗

Past, Present and Future Trends for NASA's EEE Parts Program

The foundation of NASA's Electrical, Electronic and Electromechanical (EEE) parts program is standardization. Standardization helps to reduce the number of unknown variables present as a project or program progresses; unknown variables equate to unknown risk. NASA spacecraft are usually 'one-offs' or at least part of a very short run, and every new part that is used represents a risk that has to be understood and mitigated as necessary. This equates directly to time and cost. Standardization of component parts is used to provide a foundation of known, dependable, qualified parts upon which a safe, reliable system can be built. In addition, the evaluation and selection of parts for the standard parts list unifies the activity under one group of experts rather than having engineers on each project overlapping and duplicating efforts. Thus, the project support engineers are able to concentrate on understanding and mitigating the risks for the non standard parts required to meet specific requirements of their project. Rapid technology change is producing conditions that make any form of parts-based standardization increasingly difficult, particularly the use of Commercial Off The Shelf (COTS) parts and assemblies. There are many complications to COTS-based standardization. COTS parts change rapidly and unpredictably, often have different characteristics fiom manufacturer to manufacturer, frequently are only available through distribution, have no universal specification and have variable and unpredictable radiation characteristics. This presentation will discuss some potential approaches to COTS parts standardization. Further into the future, in three to five years perhaps, the use of COTS boards and boxes will be extensive and standardization at these levels of assembly will be necessary. In five to ten years, most major spacecraft functions will probably be performed by COTS boards. How will this be achieved? What role will the parts engineer play, if any? This presentation will borrow from the lessons of the past to suggest some scenarios for the future.

Sampson, Michael J.↗

Workshop on Europa's Icy Shell: Past, Present, and Future

This volume contains abstracts that have been accepted for presentation at the workshop on Europa's Icy Shell: Past, Present, and Future, February 6-8,2004, Houston, Texas. Administration and publications support for this meeting were provided by the staff of the Publications and Program Services Department at the Lunar and Planetary Institute.

Source record↗

Microgravity Manufacturing: Extending Rapid Prototyping Past the Horizon

Over the last decade, rapid prototyping (RP) technologies have continued to advance in all aspects of operation and application. From continuously advanced materials and processes development to more hard-core manufacturing uses, the RP realm has stretched considerably past its original expectations as a prototyping capability. This paper discusses the unique applications for which NASA has chosen these manufacturing techniques to be utilized in outer space.

Cooper, Ken↗

Past, present, and future life on Mars

Although the Viking results indicated that the surface of Mars is dry and lifeless, there is direct geomorphological evidence that Mars had large amounts of liquid water on its surface in the past. From a biological perspective the existence of liquid water, by itself, motivates the question of the origin of life on Mars. One of the martian meteorites dates back to this early period and may contain evidence consistent with life. The Mars environment 3.5 to 4.0 Gyr ago was comparable to that on the Earth at this time in that both contained liquid water. Life had originated on Earth and reached a fair degree of biological sophistication by 3.5 Gyr ago. To determine if life similarly arose on Mars may require extensive robotic exploration and ultimately human exploration. Intensive exploration of Mars will require a continued presence on the Martian surface and the development of a self sustaining community in which humans can live and work for very long periods of time. A permanent Mars research station can obtain its life support requirements directly from the martian environment enabling a high degree of self-sufficiency. In the longer term, it is possible that in the future we might restore a habitable climate on Mars, returning it to the life-bearing state it may have enjoyed early in its history.

NASA Center ARC↗

Mass spectrometry in the U.S. space program: past, present, and future

Recent years have witnessed significant progress on the miniaturization of mass spectrometers for a variety of field applications. This article describes the development and application of mass spectrometry (MS) instrumentation to support of goals of the U.S. space program. Its main focus is on the two most common space-related applications of MS: studying the composition of planetary atmospheres and monitoring air quality on manned space missions. Both sets of applications present special requirements in terms of analytical performance (sensitivity, selectivity, speed, etc.), logistical considerations (space, weight, and power requirements), and deployment in perhaps the harshest of all possible environments (space). The MS instruments deployed on the Pioneer Venus and Mars Viking Lander missions are reviewed for the purposes of illustrating the unique features of the sample introduction systems, mass analyzers, and vacuum systems, and for presenting their specifications which are impressive even by today's standards. The various approaches for monitoring volatile organic compounds (VOCs) in cabin atmospheres are also reviewed. In the past, ground-based GC/MS instruments have been used to identify and quantify VOCs in archival samples collected during the Mercury, Apollo, Skylab, Space Shuttle, and Mir missions. Some of the data from the more recent missions are provided to illustrate the composition data obtained and to underscore the need for instrumentation to perform such monitoring in situ. Lastly, the development of two emerging technologies, Direct Sampling Ion Trap Mass Spectrometry (DSITMS) and GC/Ion Mobility Spectrometry (GC/IMS), will be discussed to illustrate their potential utility for future missions. c 2001 American Society for Mass Spectrometry.

NASA Discipline Environmental Health↗

Search for past life on Mars: possible relic biogenic activity in martian meteorite ALH84001

Fresh fracture surfaces of the martian meteorite ALH84001 contain abundant polycyclic aromatic hydrocarbons (PAHs). These fresh fracture surfaces also display carbonate globules. Contamination studies suggest that the PAHs are indigenous to the meteorite. High-resolution scanning and transmission electron microscopy study of surface textures and internal structures of selected carbonate globules show that the globules contain fine-grained, secondary phases of single-domain magnetite and Fe-sulfides. The carbonate globules are similar in texture and size to some terrestrial bacterially induced carbonate precipitates. Although inorganic formation is possible, formation of the globules by biogenic processes could explain many of the observed features, including the PAHs. The PAHs, the carbonate globules, and their associated secondary mineral phases and textures could thus be fossil remains of a past martian biota.

NASA Discipline Number 52-10↗

Age-Orientation Relationships of Northern Hemisphere Martian Gullies and "Pasted-on" Mantling Unit: Implications for Near-Surface Water Migration in Mars' Recent History

The finding of abundant, apparently young, Martian gullies with morphologies indicative of formation by flowing fluid was surprising in that volumes of near-surface liquid water in sufficient quantities to modify the surface geology were not thought possible under current conditions. Original hypotheses on origin of gullies were mostly centered on groundwater seepage and surface runoff and melting of near-surface ground ice. More recently, melting of snow deposited in periods of higher obliquity has been proposed as a possible origin of the gullies. Tied to this hypothesis is the supposition that the "pasted-on" mantling unit observed in association with many gullies is composed of remnant snowpack. The mantling unit has distinct rounded edge on its upper boundary and exhibits features suggestive of flow noted that the uppermost part of the mantle marks where gullies begin, suggesting that the source of water for the gullies was within the mantle. The mantle is found preferentially on cold, pole-facing slopes and, where mantled and non-mantled slopes are found together, gullies are observed incised into the latter. In other cases, the mantling material lacks gullies.

Bridges, N. T.↗

Mass Spectrometry for Planetary Probes: Past, Present and Future

Atmospheric entry probes present a unique opportunity for performing quantitative analysis of extra-terrestrial atmospheres in cases where remote sensing alone may not be sufficient and measurements with balloons or aircraft is not practical. An entry probe can provide a complete vertical profile of atmospheric parameters including chemical composition, which cannot be obtained with most other techniques. There are, however, unique challenges associated with building instruments for an entry probe, as compared to orbiters, landers, or rovers. Conditions during atmospheric entry are extreme, there are inherent time constraints due to the short duration of the experiment, and the instrument experiences rapid environmental changes in temperature and pressure as it descends. In addition, there are resource limitations, i.e. mass, power, size and bandwidth. Finally, the demands on the instrument design are determined in large part by conditions (pressure, temperature, composition) unique to the particular body under study, and as a result there is no one-size-fits-all instrument for an atmospheric probe. Many of these requirements can be more easily met by miniaturizing the probe instrument. Our experience building mass spectrometers for atmospheric entry probes leads us to believe that the time is right for a fundamental change in the way spaceflight mass spectrometers are built. The emergence over the past twenty years of Micro-electro- mechanical Systems (MEMS), utilizing lithographic semiconductor fabrication techniques to produce instrument systems in miniature, holds great promise for application to spaceflight mass spectrometry. A highly miniaturized, high performance and low-power mass spectrometer would be an enormous benefit to future entry probe missions, allowing, for example, parallel measurements (e.g., multiple simultaneous gas chromatographic analyses and direct atmospheric leaks.) Such an instrument would also enable mass spectrometry on board small multiple entry probes. In the development of a MEMS Mass Spectrometer, the challenge facing us is to move beyond the proof-of-concept, where research dollars tend to focus, and carry out the detailed work of developing a high performance mass spectrometer system on a chip which meets the unique technical requirements for an atmospheric entry probe described above.

Niemann, Hasso B.↗

Experimental study of flow past turbine blades

The requirements on gas turbines for aircraft power units, namely, adequate efficiency, operation at high gas temperatures, low weight, and small dimensions, must be taken into consideration during the design of the blading. To secure good efficiency, it is necessary that the gas flow past the blades as smoothly as possible without separation. This is relatively easily obtainable in the accelerated flow of turbine blading, if the blade spacing is chosen small enough. A small blade spacing, however, is detrimental to the other requirements outlined above. Operation at high gas temperatures usually calls for blade cooling. This cooling is associated with a power input that lowers the turbine efficiency. Since the amount of heat that must be carried off for coding a blade can be influenced rather little, the gross power input for a turbine stage can be reduced by keeping the number of blades to a minimum, that is, with blades of high spacing ratio. But here also a limit is imposed, the exceeding of which is followed by separation of flow. Hence the requirement of finding blade forms on which the flow separates at rather high spacing ratios .

Eckert, E.↗

NASA Crew and Cargo Launch Vehicle Development Approach Builds on Lessons from Past and Present Missions

The United States (US) Vision for Space Exploration, announced in January 2004, outlines the National Aeronautics and Space Administration's (NASA) strategic goals and objectives, including retiring the Space Shuttle and replacing it with new space transportation systems for missions to the Moon, Mars, and beyond. The Crew Exploration Vehicle (CEV) that the new human-rated Crew Launch Vehicle (CLV) lofts into space early next decade will initially ferry astronauts to the International Space Station (ISS) Toward the end of the next decade, a heavy-lift Cargo Launch Vehicle (CaLV) will deliver the Earth Departure Stage (EDS) carrying the Lunar Surface Access Module (LSAM) to low-Earth orbit (LEO), where it will rendezvous with the CEV launched on the CLV and return astronauts to the Moon for the first time in over 30 years. This paper outlines how NASA is building these new space transportation systems on a foundation of legacy technical and management knowledge, using extensive experience gained from past and ongoing launch vehicle programs to maximize its design and development approach, with the objective of reducing total life cycle costs through operational efficiencies such as hardware commonality. For example, the CLV in-line configuration is composed of a 5-segment Reusable Solid Rocket Booster (RSRB), which is an upgrade of the current Space Shuttle 4- segment RSRB, and a new upper stage powered by the liquid oxygen/liquid hydrogen (LOX/LH2) J-2X engine, which is an evolution of the J-2 engine that powered the Apollo Program s Saturn V second and third stages in the 1960s and 1970s. The CaLV configuration consists of a propulsion system composed of two 5-segment RSRBs and a 33- foot core stage that will provide the LOX/LED needed for five commercially available RS-68 main engines. The J-2X also will power the EDS. The Exploration Launch Projects, managed by the Exploration Launch Office located at NASA's Marshall Space Flight Center, is leading the design, development, testing, and operations planning for these new space transportation systems. Utilizing a foundation of heritage hardware and management lessons learned mitigates both technical and programmatic risk. Project engineers and managers work closely with the Space Shuttle Program to transition hardware, infrastructure, and workforce assets to the new launch systems, leveraging a wealth of knowledge from Shuffle operations. In addition, NASA and its industry partners have tapped into valuable Apollo databases and are applying corporate wisdom conveyed firsthand by Apollo-era veterans of America s original Moon missions. Learning from its successes and failures, NASA employs rigorous systems engineering and systems management processes and principles in a disciplined, integrated fashion to further improve the probability of mission success.

Dumbacher, Daniel L.↗

NASA Crew and Cargo Launch Vehicle Development Approach Builds on Lessons Learned from Past and Present Missions

A viewgraph presentation of NASA crew and cargo launch vehicle development building upon lessons learned from past and present missions is shown. The topics include: 1) U.S. Vision for Space Exploration; 2) NASA's Exploration Road Map; 3) The Moon-The First Step to Mars and Beyond; 4) Building on a Foundation of Proven Technologies; 5) Constellation Launch Vehicle Elements; 6) 1.5 Launch Earth Orbit/Lunar Orbit Rendezvous; 7) The Journey Continues; 8) Design Philosophy for Mission Success; 9) Lessons Learned: Implementation Tenets; and 10) Lessons Learned: Early Integration with the Operators.

Dumbacher, Dan↗

Life on Mars: Past, Present, and Future

Mars has evidence for past liquid water, presence of an atmosphere with CO2 and N2, and potential for preservation of evidence of life. Composition of the Martian atmosphere is 95.3% Carbon dioxide, 2.7% Nitrogen, 1.6% Argon, 0.3-0.1% Water Vapor, 0.13% Oxygen, and 0.07% Carbon Monoxide. Current Mars missions include: Mars Global Surveyor, Mars Odyssey, Mars Exploration Rovers, Mars Express, and Mars Reconnaissance Orbiter,

McKay, Chris↗

Space Radiation Organ Doses for Astronauts on Past and Future Missions

We review methods and data used for determining astronaut organ dose equivalents on past space missions including Apollo, Skylab, Space Shuttle, NASA-Mir, and International Space Station (ISS). Expectations for future lunar missions are also described. Physical measurements of space radiation include the absorbed dose, dose equivalent, and linear energy transfer (LET) spectra, or a related quantity, the lineal energy (y) spectra that is measured by a tissue equivalent proportional counter (TEPC). These data are used in conjunction with space radiation transport models to project organ specific doses used in cancer and other risk projection models. Biodosimetry data from Mir, STS, and ISS missions provide an alternative estimate of organ dose equivalents based on chromosome aberrations. The physical environments inside spacecraft are currently well understood with errors in organ dose projections estimated as less than plus or minus 15%, however understanding the biological risks from space radiation remains a difficult problem because of the many radiation types including protons, heavy ions, and secondary neutrons for which there are no human data to estimate risks. The accuracy of projections of organ dose equivalents described here must be supplemented with research on the health risks of space exposure to properly assess crew safety for exploration missions.

Cucinotta, Francis A.↗

Mars Rovers, Past and Future

This paper discusses the history of planetary rovers, including research vehicles, from the initial concepts in the early 1960's to the present. General characteristics and their evolution are discussed including mission drivers, technology limitations, controls approach, mobility and overall performance. Special emphasis is given to the next generation mission of rovers, the Mars Science Laboratory rover. This vehicle is being designed for a 2009 launch with the capability to operate over 80% of the surface of Mars for a full Martian year (687 days). It is designed to visit numerous sites, with a science payload capable of making measurements that will enable understanding the past or present habitability of Mars.

Mars rovers↗

Positive paste with lead-coated glass fibers

A reliable positive plate for deep cycle lead-acid batteries is provided by dispersing about 2 percent by volume of fine, short, lead-coated reinforcement fibers such as fiberglass in the positive active paste before being applied to the grid of a battery plate and cured. The fibers improve the structural integrity of the plate and also provide electrical paths in a discharged plate. This results in greater utilization of the lead dioxide active material by preventing charged portions of the plate from becoming electrically isolated.

Rippel, Wally E.↗