Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Overview”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

RAVEN as a tool for dynamic probabilistic risk assessment: Software overview

RAVEN is a software tool under development at the Idaho National Laboratory (INL) that acts as the control logic driver and post-processing tool for the newly developed Thermal-Hydraulic code RELAP-7. The scope of this paper is to show the software structure of RAVEN and its utilization in connection with RELAP-7. A short overview of the mathematical framework behind the code is presented along with its main capabilities such as on-line controlling/ monitoring and Monte-Carlo sampling. A demo of a Station Black Out PRA analysis of a simplified Pressurized Water Reactor (PWR) model is shown in order to demonstrate the Monte-Carlo and clustering capabilities. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Port Granby Project Overview - 13208

The Port Granby Project is an integral part of the Port Hope Area Initiative (PHAI), and is located approximately 14 kilometres west of the Municipality of Port Hope in the adjacent Municipality of Clarington, Ontario. The principal objective of the project is the excavation and relocation of low-level radioactive waste (LLRW) and marginally contaminated soils, which were deposited at the Port Granby Waste Management Facility (PGWMF) by Eldorado Nuclear Limited during the period 1955 to 1988, to a new, highly engineered above-ground Long-term Waste Management Facility (LTWMF) to be constructed on a nearby site. The Environmental Assessment for the Project was approved in 2009 August and the required Waste Nuclear Substance License was received in 2011 November. Once the detailed engineering design was completed, in 2011 March, the Port Granby Project was divided into three major contracts for construction implementation purposes. The first of these contracts was completed in late 2012 and the second is planned to start in early 2013. The contracting process for the third major contract is also expected to be completed during 2013. This paper provides an overview of the Port Granby Project as well as discussion on the status of the Project, including the regulatory approvals process, the approach to contracting the construction works and an update of work recently completed and soon to get underway. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An Overview of IAEA Activities to Support Pre-disposal Management of Radioactive Wastes in Member States - 12334

The International Atomic Energy Agency (IAEA) promotes safe and effective management of radioactive waste and has suitable programmes in place to serve the needs of Member States in this area. These programmes cover the development and use of safety standards, planning, technologies and approaches needed for the management of different types of radioactive waste, resulting both from the nuclear fuel cycle and nuclear applications. In the pre-disposal area, the assistance to Members States covers a wide range of topics, including policy and strategy, inventory assessment, technologies and approaches for waste minimization, selection of technical options for waste processing and storage, improvement in operating practices at nuclear facilities, optimization of waste management capacity, etc. and is delivered through the publication of technical guidance documents, coordinated research projects, networks, technical cooperation projects and organization of training and technical review services. This report presents an overview of recent IAEA accomplishments aiming to support activities in pre-disposal management of radioactive waste with focus on technological aspects. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reactor Design and Decommissioning - An Overview of International Activities in Post Fukushima Era1 - 12396

Accidents at the Fukushima Dai-ichi reactors as a result of the devastating earthquake and tsunami of March 11, 2011 have not only dampened the nuclear renaissance but have also initiated a re-examination of the design and safety features for the existing and planned nuclear reactors. Even though failures of some of the key site features at Fukushima can be attributed to events that in the past would have been considered as beyond the design basis, the industry as well as the regulatory authorities are analyzing what features, especially passive features, should be designed into the new reactor designs to minimize the potential for catastrophic failures. It is also recognized that since the design of the Fukushima BWR reactors which were commissioned in 1971, many advanced safety features are now a part of the newer reactor designs. As the recovery efforts at the Fukushima site are still underway, decisions with respect to the dismantlement and decommissioning of the damaged reactors and structures have not yet been finalized. As it was with Three Mile Island, it could take several decades for dismantlement, decommissioning and clean up, and the project poses especially tough challenges. Near-term assessments have been issued by several organizations, including the IAEA, the USNRC and others. Results of such investigations will lead to additional improvements in system and site design measures including strengthening of the anti-tsunami defenses, more defense-in-depth features in reactor design, and better response planning and preparation involving reactor sites. The question also arises what would the effect be on the decommissioning scene worldwide, and what would the effect be on the new reactors when they are eventually retired and dismantled. This paper provides an overview of the US and international activities related to recovery and decommissioning including the decommissioning features in the reactor design process and examines these from a new perspective in the post Fukushima -accident era. Accidents at the Fukushima Daiichi reactors in the aftermath of the devastating earthquake and tsunami of March 11, 2011 have slowed down the nuclear renaissance world-wide and may have accelerated decommissioning either because some countries have decided to halt or reduce nuclear, or because the new safety requirements may reduce life-time extensions. Even in countries such as the UK and France that favor nuclear energy production existing nuclear sites are more likely to be chosen as sites for future NPPs. Even as the site recovery efforts continue at Fukushima and any decommissioning decisions are farther into the future, the accidents have focused attention on the reactor designs in general and specifically on the Fukushima type BWRs. The regulatory authorities in many countries have initiated a re-examination of the design of the systems, structures and components and considerations of the capability of the station to cope with beyond-design basis events. Enhancements to SSCs and site features for the existing reactors and the reactors that will be built will also impact the decommissioning phase activities. The newer reactor designs of today not only have enhanced safety features but also take into consideration the features that will facilitate future decommissioning. Lessons learned from past management and operation of reactors as well as the lessons from decommissioning are incorporated into the new designs. However, in the post-Fukushima era, the emphasis on beyond-design-basis capability may lead to significant changes in SSCs, which eventually will also have impact on the decommissioning phase. Additionally, where some countries decide to phase out the nuclear power, many reactors may enter the decommissioning phase in the coming decade. While the formal updating and expanding of existing guidance documents for accident cleanup and decommissioning would benefit by waiting until the Fukushima project has progressed sufficiently for that experience to be reliably interpreted, the development of structured on-line sharing of information and especially the creation of an on-line compendium of methods, tools, and techniques by which damaged fuel and other unique situations have been addressed can be addressed sooner and maintained as new problems and solutions arise and are resolved. The IAEA's new 'WEB 2.0 tool' CONNECT is expected to play a significant role in this and related information-sharing activities. The trend in some countries such as the United States has been to re-license the existing reactors for additional twenty years, beyond the original design life. Given the advances in technology over the past four decades, and considering that the newer designs incorporate significant improvements in safety systems, it may not be economical or technically feasible to retrofit enhancements into some of the older reactors. In such cases, the reactors may be retired from service and decommissioned. Overall, the energy demand in the world continues to rise, with sharp increases in the Asian countries, and nuclear power's role in the world's energy supply is expected to continue. Events at Fukushima have led to a re-examination on many fronts, including reactor design and regulatory requirements. Further changes may occur in these areas in the post-Fukushima era. These changes in turn will also impact the world-wide decommissioning scene and the decommissioning phase of the future reactors. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NRC Waste Incidental to Reprocessing Program: Overview of Consultation and Monitoring Activities at the Idaho National Laboratory and the Savannah River Site - What We Have Learned - 12470

In 2005 the U.S. Nuclear Regulatory Commission (NRC) began to implement a new set of responsibilities under the Ronald W. Reagan National Defense Authorization Act (NDAA) of Fiscal Year 2005. Section 3116 of the NDAA requires the U.S. Department of Energy (DOE) to consult with the NRC for certain non-high level waste determinations and also requires NRC to monitor DOE's disposal actions related to those determinations. In Fiscal Year 2005, the NRC staff began consulting with DOE and completed reviews of draft waste determinations for salt waste at the Savannah River Site. In 2006, a second review was completed on tank waste residuals including sodium-bearing waste at the Idaho Nuclear Technology and Engineering Center Tank Farm at the Idaho National Laboratory. Monitoring Plans were developed for these activities and the NRC is actively monitoring disposal actions at both sites. NRC is currently in consultation with DOE on the F-Area Tank Farm closure and anticipates entering consultation on the H-Area Tank Farm at the Savannah River Site. This paper presents, from the NRC perspective, an overview of how the consultation and monitoring process has evolved since its conception in 2005. It addresses changes in methods and procedures used to collect and develop information used by the NRC in developing the technical evaluation report and monitoring plan under consultation and the implementation the plan under monitoring. It will address lessons learned and best practices developed throughout the process. The NDAA has presented significant challenges for the NRC and DOE. Past and current successes demonstrate that the NDAA can achieve its intended goal of facilitating tank closure at DOE legacy defense waste sites. The NRC believes many of the challenges in performing the WD reviews have been identified and addressed. Lessons learned have been collected and documented throughout the review process. Future success will be contingent on each agencies commitment to consistently apply the lessons learned and continue to create an open and collaborative work environment to maintain the process of continuous improvement. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

CYRANO3 the EDF fuel code performance: Global overview and recent developments on MOX fuel

CYRANO3 is the thermal mechanical industrial code developed and used by EDF to simulate the nuclear fuel rod performance in pile, and during the disposal storage period as well. This code has already been used successfully for the last ten years by the EDF engineering teams in justifying the overall reloading options covering various fuels: UO{sub 2}, UO{sub 2} + gadolinium, MOX, UO{sub 2} plus additives, and various cladding as well proposed by the nuclear fuel suppliers. Its particularity is related to a construction around a standard one-dimensional thermal and mechanical finite elements kernel with an appropriate architecture to plug in any new functionalities or models. Since the beginning it is developed as a module able integrating within a core calculation chain. Other constrain is to always guaranty a running time consistent with the calculation of a core within a reasonable time. The objective is to provide the EDF designers with a convivial and qualified code, with robust algorithms and able to quickly evolve with computer performances. Algorithms are able to account for adiabatic transients and are robust enough to avoid any undesirable overflows. The permanent challenge is indeed to provide with the more descriptive simulations not degrading to much the running time. Developments are obviously performed within the strict Quality Insurance rules. The code is then associated to a large documentation base, including model specification, realization, validation and test procedures. Maintenance is managed through a system of anomaly and improvement forms. Computers are still evolving quickly. Therefore, after an architecture adaptation, the CYRANO3 code is now integrated in the PLEIADES platform as a PWR industrial application. The platform is an exchange space allowing sharing functionalities, models and properties. In this paper, we will give a global overview of the capabilities of CYRANO3 code to simulate the thermomechanical behavior of fuel rods, and we will focus on recent developments realized on MOX fuel. In CYRANO3 code, heterogeneous models (neutronic model, micromechanical behavior law and fission gas model) are developed for MOX fuels and integrated in order to account for differential evolutions between phases under irradiation. The methodology and these models are presented in this paper. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Overview of the multifaceted activities towards development and deployment of nuclear-grade FeCrAl alloys

A large effort is underway under the leadership of US DOE Fuel Cycle Research program to develop advanced FeCrAl alloys as accident tolerant fuel (ATF) cladding to replace Zr-based alloys in light water reactors. The primary motivation is the excellent oxidation resistance of these alloys in high-temperature steam environments right up to their melting point (roughly three orders of magnitude slower oxidation kinetics than zirconium). A multifaceted effort is ongoing to rapidly advance FeCrAl alloys as a mature ATF concept. The activities span the broad spectrum of alloy development, environmental testing (high-temperature high-pressure water and elevated temperature steam), detailed mechanical characterization, material property database development, neutron irradiation, thin tube production, and multiple integral fuel test campaigns. Instead of off-the-shelf commercial alloys that might not prove optimal for the LWR fuel cladding application, a large amount of effort has been placed on the alloy development to identify the most optimum composition and microstructure for this application. The development program is targeting a cladding that offers performance comparable to or better than modern Zr-based alloys under normal operating and off-normal conditions. This paper provides a comprehensive overview of the systematic effort to advance nuclear-grade FeCrAl alloys as an ATF cladding in commercial LWRs. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Overview of the DOE nuclear fuels storage and transportation planning project - 15444

The US Department of Energy (DOE) Office of Nuclear Energy is conducting planning activities within the Nuclear Fuels Storage and Transportation Planning Project (NFST) to lay the groundwork for implementing interim storage, including associated transportation, per the Administration's Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste, and to develop a foundation for a new nuclear waste management organization. The purpose of the NFST is to make progress on this important national issue within existing legislative and budgetary authorizations. The objective of the NFST is to develop and begin implementation of an integrated plan to (1) implement interim storage; (2) improve the overall integration of storage as a planned part of the waste management system; (3) prepare for the large-scale transportation of spent nuclear fuel and high-level radioactive waste, with an initial focus on removing SNF from the shutdown reactor sites; and (4) develop foundational information, resources, and capabilities needed to support the aforementioned objectives and future implementation decisions and actions. An over-arching goal is to develop options for decision-makers on the design of an integrated waste management system. The planning activities are divided into four major topical areas: (1) Consent-Based Siting, (2) Storage, (3) Transportation, and (4) Strategic Crosscuts. This paper provides an overview of the NFST and its activities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Apatite Based Ceramic Waste Forms for Immobilization of Radioactive Iodine, An Overview - 16155

Apatite based ceramic waste forms are the most promising candidates for immobilization of radioactive iodine (I-129). While lead-vanadium based apatites have been studied for a long time, significant progress has been made in recent years in the domain of calcium-phosphate based apatites for iodine immobilization. This article is an attempt to present an overview of the progress that has been made in terms of developing novel synthesis and processing routes to contain iodine in apatite based ceramic waste forms. The challenges associated with current state-of-the art waste form synthesis techniques along with novel routes to synthesize these waste forms at low temperatures have also been discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

UPGrants LCA Overview

Presentation providing an overview of the LCA requirements and tools for potential vendors in the Utilization Procurement Grants (UPGrants) program.

Krynock, Michelle↗

Overview and status of domestic and international standards for nuclear criticality safety

For many years, the domestic and international consensus standards for nuclear criticality safety (NCS) have provided guidance for those performing hands-on operations involving fissionable materials. These consensus standards have been crucial to reducing the number of criticality accidents in process facilities. The last known criticality accident inside the United States was in 1978 (39 years ago at this writing) at the Idaho Chemical Processing Plant, and outside the United States, an accident occurred at Tokai-Mura, Japan, in 1999 (18 years ago at this writing). The domestic consensus standards for NCS include the American Nuclear Society (ANS) standards. The ANS Standards Board, the NCS Consensus Committee, and the ANS-8 Subcommittee oversee the development and maintenance of these standards. There are currently eighteen standards in revision (seven) or maintenance (eleven) cycles, and one standard is currently in development. The international consensus standards for NCS calculations, procedures, and practices are maintained and developed within the International Organization for Standardization, Technical Committee 85 on Nuclear Energy, Subcommittee 5 on Nuclear Fuel Technology, and Working Group 8, Nuclear Criticality Safety. Seven standards are currently available, one standard is in revision, and four standards are at various stages of development. This paper provides the NCS community with an overview and status report of domestic and international NCS consensus standards to stimulate interest and to support their continued development. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Overview of IAEA MODARIA II Program Working Group 1 on Assessment and Decision Making of Existing Exposure Situations for NORM and Nuclear Legacy Sites - 18308

The International Atomic Energy Agency (IAEA) launched the Modelling and Data for Radiological Impact Assessments (MODARIA) II Programme in October. As part of the IAEA effort to enhance the capabilities of its Member States in assessing radiological impacts of radionuclides released to the environment from sites that were not operated in accordance with current standards, and to ensure protection of the public and the environment, the MODARIA II Programme aims to: (1) test the performance of models developed for predicting the transfer of radionuclides in the environment and assessing radiological impacts to the public and the environment; (2) develop and improve models for particular environments and, where appropriate, to agree on data sets that are generally applicable for use in testing environmental transfer models; and (3) provide an international forum for the exchange of experiences, ideas and research information. The Programme will run for 3 years from 2016 to 2019. The Programme comprises seven working groups covering a wide range of topics (https://wwwns.iaea.org/projects/modaria/modaria2.asp?s=8 and l=129). MODARIA II Working Group 1 (WG1) is focused on dose assessment and decision making regarding existing exposure situations due to naturally occurring radioactive material (NORM) and nuclear legacy sites. WG1 was formed as a combination of two MODARIA I WGs: WG1 focused on application of decision-aiding tools in remediation; and WG3 focused on risk assessment for NORM and radioactively contaminated legacy sites (https://wwwns.iaea.org/projects/modaria/default.asp?s=8 and l=129). It was recognized that the decision-making needs will inform the scope of risk assessments, and the risk insights and structured decision analyses will aid in informed decision-making. Therefore, MODARIA II WG1 is focused on developing methods and toolsets for risk-informed decision-making for NORM and nuclear legacy sites, including demonstration of decision-making processes and tools through case studies. MODARIA II WG1 has 91 registered participants from 33 Member States and IAEA (as of November 2017), some 30 of whom are actively engaged in various collaborative research and development activities within WG1. Members of WG1 participated in the First Technical Meeting of MODARIA II, which was held in Vienna, Austria from 31 October to 4 November 2016. The group then held its First Interim Meeting in Brussels, Belgium from 26 to 30 June 2017, which included a field trip to the legacy Tessenderlo Chemie (TCH) Phosphate Processing Site. At this meeting, the TCH Site and the Pridneprovsky Chemical Plant (PChP) in Ukraine were selected for case studies. The Los Alamos National Laboratory (LANL) Material Disposal Area B in the USA and the Beaverlodge Uranium Mill and Mill Site in northern Canada were selected as examples for sharing of good practices and lessons learned in risk-informed decision-making for environmental remediation and land conveyance. At the Second Technical Meeting held in Vienna on 30 October to 3 November 2017, an additional NORM site for tin processing in Brazil was added to the case studies, with another NORM site in Yunnan, China included for consideration at the Second Interim Meeting of WG1. The Second Interim Meeting will be held in in early to mid-May, 2018. The group has also decided to prepare an Interim Report by October 2018 to document the WG1 discussions and analyses for the period of 2016-2018, which will be finalized at the conclusion of MODARIA II in October 2019. Initial assignments have been discussed for IM1 participants to collect data, conduct modelling and analyses, and prepare draft sections for the Interim Report. This paper will provide an overview of the work plans for WG1. It will also highlight some near-term activities that the group is currently working on. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Arizona Public Service - NRIC Overview

This deck contains an update on NRIC activities along with an overview of reactor development in the United States.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An Overview of Material Models in the BISON Fuel Performance Code

BISON is a modern finite element-based nuclear fuel performance code that has been under development at Idaho National Laboratory (INL) since 2009. The code is applicable to both steady and transient fuel behavior and supports the use of one-, two-, and three-dimensional meshes. BISON is designed to be a multi-fuels code. Although primarily applied to Light Water Reactor (LWR) fuel to date, the code has been used to analyze TRISO-coated particle fuel and metal fuel in rod and plate form, design and interpret fuel irradiation experiments and investigate novel fuel concepts. Nuclear fuel operates in an extreme environment that induces complex multiphysics phenomena occurring over distances ranging from inter-atomic spacing to meters, and times scales ranging from microseconds to years. To simulate this behavior requires a wide variety of material models which are often complex and nonlinear. Nearly all of the material models currently available in BISON are empirical, using correlations from existing fuel performance codes or material property libraries. Although these models perform adequately under many conditions, they have well-understood limitations. One obvious weakness is that the models are only valid in the domain of the associated experimental data, and extrapolating beyond this domain can result in substantial errors. A further weakness is that these models are often correlated in terms of imprecise quantities, such as burnup. Materials can, for example, reach a given burnup under very different circumstances, leading to very different material behavior. To overcome these weaknesses, efforts are underway with BISON to develop models based on a multi-scale approach, where material behavior is described with a series of interdependent microstructure based models. This paper provides an overview of the material models available in BISON. To keep the scope manageable, only LWR fuel will be considered. The first section focuses on UO{sub 2} fuel, identifying the models generally required and briefly describing those that have been implemented in the code. The second section repeats this approach for Zircaloy cladding. A final section provides examples of areas where multi-scale material modeling has been applied to BISON. BISON is a modern 2D and 3D nuclear fuel performance code that is applicable to multiple fuel forms. A wide variety of complex and nonlinear material models are required to simulate fuel behavior. Focusing on UO{sub 2} fuel and Zircaloy cladding (LWR fuel), the set of empirical models currently implemented in BISON have been reviewed. To overcome some of the deficiencies associated with empirical models, multi-scale material models are being developed. Two multi-scale models that have been used in BISON were reviewed. (authors)

36 MATERIALS SCIENCE↗

Overview of Kinectrics' Experience in Characterization of Low and Intermediate Level Waste (L and ILW) - 19144

Kinectrics has over two decades of experience in physico-chemical and radiological characterization of L and ILW generated from the operation and refurbishment of nuclear reactors owned by Ontario Power Generation (OPG). This characterization is required to develop an inventory and also to support the safety case, as well as licensing, of OPG's waste management facilities including its planned Deep Geological Repository (DGR) for Low and Intermediate Level Waste (L and ILW). The typical waste matrices characterized include reactor artefacts, non-processable, compactable, incinerable, ash, assorted resin, filters, and sludge. The objective of this paper is to present an overview of the characterization work undertaken over the years and further elaborate on some recent activities pertaining to characterization of a select subset of L and ILW streams such as pressure tubes, feeder pipes, bulk non-processable and active liquid waste. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Overview of Innovative Canadian Solutions for Management of Mixed Liquid Waste - 19359

Historically, Mixed Liquid Waste (MLW) drums from Canadian facilities were shipped to a licensed US facility for destruction via incineration. In order to address the various challenges and complexities associated with this approach, Kinectrics developed a flexible process for disposal of both Poly Chlorinated Biphenyls (PCB) and non-PCB contaminated MLW within Canada. The objective of this paper is to present project case studies that provide an overview of the various approaches employed since 2010 by Kinectrics for management of MLW within Canada. Various innovative approaches to processing a variety of MLW, key results, recent developments, successes, challenges and lessons learned are discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Overview of Novel Canadian Approaches for Decontamination of Solid Radioactive and Mixed Waste - 19476

The availability of decontamination-for-release technology options provide a path forward to economically decontaminate radioactive metallic waste and enable its disposal as clean scrap metal, to decontaminate tools/equipment for unrestricted refurbishment or reuse, and to carry out inspection of in-service components. Projects involving management of solid mixed waste pose complex technical challenges that require the development and application of novel decontamination processes. The objective of this paper is to present project case studies that provide an overview of Kinectrics' experience with the decontamination of solid radioactive and mixed waste. Novel approaches to decontamination, recent developments, key results and lessons learned will also be discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Overview of Canada's Plan for the Long-Term Management of Used Nuclear Fuel - 19537

In June 2007, the Government of Canada approved the Nuclear Waste Management Organisation's (NWMO) recommended Adaptive Phased Management (APM) approach for the long-term management of Canada's used nuclear fuel. As per this approach, used nuclear fuel will be isolated and contained in a centralized Deep Geological Repository (DGR) located in a stable crystalline or sedimentary rock formation at a nominal depth of 500 metres below ground surface. The DGR concept contains multiple barriers to safely contain and isolate the used nuclear fuel over the long-term. The used nuclear fuel bundles will be encapsulated in a copper-coated steel Used Fuel Container (UFC) and pre-packaged in a bentonite clay buffer box above ground. The UFC and bentonite clay buffer box assemblies will then be emplaced in excavated tunnel openings and sealed with clay-based backfill material and room seals, which completes the primary Engineered Barrier System (EBS). Since 2011, the NWMO has executed a design-development program to validate the design and manufacturing technologies for the EBS. Currently, the NWMO are executing a proof test program for the EBS for the purpose of demonstrating serial production. As the prototypes are produced, they will be subject to full-scale in-room emplacement trials within a custom-built above-ground mock emplacement room. The proof test program will be executed using APM reference designs, materials, processes, and procedures. An overview of this program is discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗