Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Above-Room-Temperature Ferromagnetism in Thin van der Waals Flakes of Cobalt-Substituted Fe 5 GeTe 2

Two-dimensional (2D) magnetic van der Waals materials provide a powerful platform for studying the fundamental physics of low-dimensional magnetism, engineering novel magnetic phases, and enabling thin and highly tunable spintronic devices. To realize high-quality and practical devices for such applications, there is a critical need for robust 2D magnets with ordering temperatures above room temperature that can be created via exfoliation. Here, in this paper, the study of exfoliated flakes of cobalt-substituted Fe 5 GeTe 2 (CFGT) exhibiting magnetism above room temperature is reported. Via quantum magnetic imaging with nitrogen-vacancy centers in diamond, ferromagnetism at room temperature was observed in CFGT flakes as thin as 16 nm corresponding to 16 layers. This result expands the portfolio of thin room-temperature 2D magnet flakes exfoliated from robust single crystals that reach a thickness regime relevant to practical spintronic applications. The Curie temperature T c of CFGT ranges from 310 K in the thinnest flake studied to 328 K in the bulk. To investigate the prospect of high-temperature monolayer ferromagnetism, Monte Carlo calculations were performed, which predicted a high value of T c of ~270 K in CFGT monolayers. Pathways toward further enhancing monolayer T c are discussed. These results support CFGT as a promising platform for realizing high-quality room-temperature 2D magnet devices.

2D magnetism↗
DOE OSTI2025

One-Step Transfer of Symmetric and Asymmetric Contacts for Large-Scale 2D Electronics and Optoelectronics

Two-dimensional (2D) semiconductors are highly promising candidates for thin-film transistor applications due to their scalability, transferability, atomic thickness, and relatively high carrier mobility. However, a substantial performance gap remains between individual devices based on single-crystalline 2D films and wafer-scale integrated circuits, primarily due to defects introduced during conventional fabrication processes. Here, we report a diamond-assisted electrode transfer technique for the van der Waals integration of wafer-scale prefabricated electrode arrays onto 2D materials, enabling scalable electronics and optoelectronics. Implemented on metal–organic chemical vapor deposition-grown monolayer molybdenum disulfide, this method forms ultraclean metal–semiconductor interfaces, yielding field-effect transistors with excellent ohmic contacts, a low contact resistance of 400 Ω·μm, and a Schottky barrier height of only 9 meV. Furthermore, we demonstrate a scalable transistor array on monolayer molybdenum disulfide with excellent device performance uniformity, achieving an average field-effect mobility of 30 cm 2 V –1 s –1 and an on/off current ratio exceeding 105. Additionally, high photocurrent and responsivity were demonstrated in the array devices, showing their potential for excellent image detection. We further demonstrate the versatility of this technique by fabricating a Schottky diode array through a single-step transfer of asymmetric electrodes─low work function aluminum and high work function gold─onto monolayer tungsten diselenide. This approach provides a clean, effective solution for contact engineering in 2D materials, offering a viable pathway toward wafer-scale, high-performance 2D electronics, optoelectronics, and integrated circuits.

2D electronics↗
DOE OSTI2025

Mo Atom Rearrangement Drives Layer-Dependent Reactivity in Two-Dimensional MoS 2

Two-dimensional (2D) materials offer a valuable platform for manipulating and studying chemical reactions at the atomic level, owing to the ease of controlling their microscopic structure at the nanometer scale. While extensive research has been conducted on the structure-dependent chemical activity of 2D materials, the influence of structural transformation during the reaction has remained largely unexplored. In this work, we report the layer-dependent chemical reactivity of MoS 2 during a nitridation atomic substitution reaction and attribute it to the rearrangement of Mo atoms. Our results show that the chemical reactivity of MoS 2 decreases as the number of layers is reduced in the few-layer regime. In particular, monolayer MoS 2 exhibits significantly lower reactivity compared with its few-layer and multilayer counterparts. Atomic-resolution transmission electron microscopy (TEM) reveals that MoN nanonetworks form as reaction products from monolayer and bilayer MoS 2 , with the continuity of the MoN crystals increasing with layer number, consistent with the local conductivity mapping data. The layer-dependent reactivity is attributed to the relative stability of the hypothetically formed MoN phase, which retains the number of Mo atomic layers present in the precursor. Specifically, the low chemical reactivity of monolayer MoS 2 is attributed to the high energy cost associated with Mo atom diffusion and migration necessary to form multilayer Mo lattices in the thermodynamically stable MoN phase. In conclusion, this study underscores the critical role of lattice rearrangement in governing chemical reactivity and highlights the potential of 2D materials as versatile platforms for advancing the understanding of materials chemistry at the atomic scale.

Chemical reactivity↗
DOE OSTI2023

Two-dimensional ruthenium boride: a Dirac nodal loop quantum electrocatalyst for efficient hydrogen evolution reaction

Catalysts with high carrier mobility, high activity, and an active basal plane have been highly sought for the hydrogen evolution reaction (HER). However, combining these advantages into one single material is a grand challenge. Herein, using first principles computations, we predicted that a two-dimensional (2D) Dirac nodal loop semimetal, namely the RuB 4 monolayer, is promising as a superior catalyst for the HER. Our systematic computations showed that the single layer RuB 4 is thermodynamically, dynamically, mechanically, and thermally stable and presents multiple Ru and B sites for the HER on the basal plane. The estimated Gibbs free energy for hydrogen adsorption at a Ru site is approaching zero (–8.8 meV), suggesting its excellent HER performance. The RuB 4 monolayer is a Dirac nodal loop semimetal with high Fermi velocities, which can accelerate charge transfer between catalysts and reaction intermediates. The RuB 4 monolayer is an auxetic material with an out-of-plane negative Poisson's ratio, implying its novel mechanical properties. Finally, this work provides an example of using a Dirac nodal loop semimetal for high-performance HER catalysts, which is a promising alternative to the known catalysts with trivial metallic properties.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

The Effect of Adsorbed Volatile Organic Compounds on an Ultrathin Water Film Measurement

Using surface plasmon resonance imaging (SPRi), we have recently shown for the first time the existence of a monolayer water film between droplets during dropwise condensation. This study examines the effect of adsorbed volatile organic compounds (VOCs) on the ultrathin film measurement using SPRi. Further, the work presents the proper surface-treatment process that enables measurements of the ultrathin water layer during high-speed imaging of dropwise condensation at 3000 frame per second. In this study, two methods were applied for cleaning the surface (gold-coated glass)—(1) standard cleaning procedure (SCP) using acetone, isopropyl alcohol, and deionized water and (2) SCP followed by air plasma cleaning. This work discusses the effect of the cleaning procedures on surface roughness, contact angle, and surface chemistry using atomic force microscopy, optical microscopy, and an X-ray photoelectron spectroscope meter. The results showed that SCP before the SPRi is a proper surface-treatment method. The effect of adsorbed VOCs during dropwise condensation on a surface treated with SCP was measured to be 0.0025 (reflectivity unit), which was 70% smaller than the reflectance associated with a monolayer water film. The results of this work confirm a monolayer water film observation during the dropwise condensation, which has been reported before.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscale Editing of Multi and Single Layer Tungsten Disulfide via Gas‐Assisted Focused Electron Beam Induced Etching for Device Prototyping

Focused electron beam induced etching (FEBIE) with XeF 2 (xenon difluoride) precursor is conducted on multi-layer exfoliated WS 2 (tungsten disulfide) and monolayer WS 2 grown by chemical vapor deposition (CVD). The films are characterized by atomic force microscopy (AFM) and Raman and photoluminescence (PL) spectroscopy post-etching. The etch rates/efficiencies are reported as a function of electron beam energy, current, dwell time, and XeF 2 pressure. Bulk film Raman spectra are unchanged post-FEBIE, indicating minimal subsurface damage. Monolayer WS 2 shows a decrease in Raman and PL intensity post-FEBIE, with a dose-to-clear of ≈2 nC µm −2 . The study reveals regimes affected by the various mass transport contributions such as refresh time and the ratio of electrons/XeF 2 . Spontaneous etching was discovered during FEBIE of large patterned areas due to the long frame/refresh times. Density functional theory and ab initio molecular dynamics simulations compares desorption of SF x and WF x molecules from pristine WS 2 basal planes and pore edges, revealing the spontaneous etching is consistent with etching of partially etched monolayers during each frame. Single-line etching width of 21 nm, and patterning flakes into 100 nm wide channels are demonstrated. In conclusion, this work demonstrates the possibility of editing WS 2 flakes into electronic devices of arbitrary dimensions for semiconductor applications.

2D materials↗
DOE OSTI2023

Topology Hierarchy of Transition Metal Dichalcogenides Built from Quantum Spin Hall Layers

The evolution of the physical properties of 2D material from monolayer limit to the bulk reveals unique consequences from dimension confinement and provides a distinct tuning knob for applications. Monolayer 1T'-phase transition metal dichalcogenides (1T'-TMDs) with ubiquitous quantum spin Hall (QSH) states are ideal 2D building blocks of various 3D topological phases. However, the stacking geometry has been previously limited to the bulk 1T'-WTe 2 type. Here, the novel 2M-TMDs consisting of translationally stacked 1T'-monolayers are introduced as promising material platforms with tunable inverted bandgaps and interlayer coupling. By performing advanced polarization-dependent angle-resolved photoemission spectroscopy as well as first-principles calculations on the electronic structure of 2M-TMDs, a topology hierarchy is revealed: 2M-WSe 2 , MoS 2 , and MoSe 2 are weak topological insulators (WTIs), whereas 2M-WS 2 is a strong topological insulator (STI). Further demonstration of topological phase transitions by tunning interlayer distance indicates that band inversion amplitude and interlayer coupling jointly determine different topological states in 2M-TMDs. Finally, it is proposed that 2M-TMDs are parent compounds of various exotic phases including topological superconductors and promise great application potentials in quantum electronics due to their flexibility in patterning with 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Defects Genome of Janus Transition Metal Dichalcogenides

2D Janus Transition Metal Dichalcogenides (TMDs) have attracted much interest due to their exciting quantum properties arising from their unique two-faced structure, broken-mirror symmetry, and consequent colossal polarization field within the monolayer. While efforts are made to achieve high-quality Janus monolayers, the existing methods rely on highly energetic processes that introduce unwanted grain-boundary and point defects with still unexplored effects on the material's structural and excitonic properties Through high-resolution scanning transmission electron microscopy (HRSTEM), density functional theory (DFT), and optical spectroscopy measurements; this work introduces the most encountered and energetically stable point defects. It establishes their impact on the material's optical properties. HRSTEM studies show that the most energetically stable point defects are single (V S and V Se ) and double chalcogen vacancy (V S −V Se ), interstitial defects (Mi), and metal impurities (MW) and establish their structural characteristics. DFT further establishes their formation energies and related localized bands within the forbidden band. Cryogenic excitonic studies on h-BN-encapsulated Janus monolayers offer a clear correlation between these structural defects and observed emission features, which closely align with the results of the theory. Finally, the overall results introduce the defect genome of Janus TMDs as an essential guideline for assessing their structural quality and device properties.

2D materials↗
DOE OSTI2023

Measuring the Exciton Binding Energy: Learning from a Decade of Measurements on Halide Perovskites and Transition Metal Dichalcogenides

The exciton binding energy ( E b ) is a key parameter that governs the physics of many optoelectronic devices. At their best, trustworthy and precise measurements of E b challenge theoreticians to refine models, are a driving force in advancing the understanding of a material system, and lead to efficient device design. At their worst, inaccurate E b measurements lead theoreticians astray, sow confusion within the research community, and hinder device improvements by leading to poor designs. Here, this review article seeks to highlight the pros and cons of different measurement techniques used to determine E b , namely, temperature‐dependent photoluminescence, resolving Rydberg states, electroabsorption, magnetoabsorption, scanning tunneling spectroscopy, and fitting the optical absorption. Due to numerous conflicting E b values reported for halide perovskites (HP) and transition metal dichalcogenides (TMDC) monolayers, an emphasis is placed on highlighting these measurements in an attempt to reconcile the variance between different measurement techniques. It is argued that the experiments with the clearest indicators are in agreement on the following values: ≈350–450 meV for TMDC monolayers between SiO 2 and vacuum, ≈150–200 meV for hBN‐encapsulated TMDC monolayers, ≈200–300 meV for common lead‐iodide 2D HPs, and ≈10 meV for methylammonium lead iodide.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dynamic Excitonic Beam Switching with Atomically‐Thin Binary Blazed Gratings

Abstract Beam steering metasurfaces are ultra‐compact optical coatings that offer on‐demand redirection of optical power to specific diffraction orders. To achieve this, spatial gradients are commonly introduced in the phase of light scattered by plasmon or Mie resonant nanoparticles within the metasurface grating's unit cell. However, these phase gradients are oftentimes difficult to tune post‐fabrication. Recently, excitons in monolayer 2D semiconductors have emerged as a new metasurface building block, due to their strong and electrically‐tunable resonant light‐matter interaction. These 2D excitonic metasurfaces offer the tantalizing prospect of beam switching within a single monolayer. Here, it is demonstrated how the 2D analog of binary blazed gratings enables such beam switching by mere nanopatterning of a large monolayer WS 2 , even though nanoscale ribbons of WS 2 do not support geometrical resonances. By introducing a gradient in the nanoribbon width within the metasurface unit cell, an amplitude gradient combined with a small phase gradient in the scattered fields results in asymmetric diffraction efficiencies. Using a scattered‐field analysis, it is shown that these gradients can be further engineered via interference effects with the substrate reflection. Finally, the electrical tunability of the exciton resonance is leveraged to achieve selective and dynamic beam switching with an atomically‐thin metasurface.

Guarneri, Ludovica [Van der Waals‐Zeeman Institute↗
DOE OSTI2025

Spatially Enhanced Electrostatic Doping in Graphene Realized via Heterointerfacial Precipitated Metals

Forming heavily-doped regions in 2D materials, like graphene, is a steppingstone to the design of emergent devices and heterostructures. Here, a selective-area approach is presented to tune the work-function and carrier density in monolayer graphene by spatially synthesizing sub-monolayer gallium beneath the 2D-solid. The localized metallic gallium is formed via precipitation from an underlying diamond-like carbon (DLC) film that is spatially implanted with gallium-ions. By controlling the interfacial precipitation process with annealing temperature, spatially precise ambipolar tuning of the graphene work-function is achieved, and the tunning effect preserved upon cooling to ambient conditions. Consequently, charge carrier densities from ≈1.8 × 10 10 cm -2 (hole-doped) to ≈7 × 10 13 cm -2 (electron-doped) are realized, confirmed by in situ and ex situ measurements. The theoretical studies corroborated the role of gallium at the heterointerface on charge transfer and electrostatic doping of the graphene overlayer. Specifically, sub-monolayer gallium facilitates heavy n-doping in graphene. Extending this doping strategy to other implantable elements in DLC provides a new means of exploring the physics and chemistry of highly-doped 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Non-close-packed plasmonic Bravais lattices through a fluid interface-assisted colloidal assembly and transfer process

Abstract The assembly of colloids at fluid interfaces followed by their transfer to solid substrates represents a robust bottom-up strategy for creating colloidal monolayers over large, macroscopic areas. In this study, we showcase how subtle adjustments in the transfer process, such as varying the contact angle of the substrate and controlling deposition speed and direction, enable the realization of all five two-dimensional Bravais lattices. Leveraging plasmonic core–shell microgels as the building blocks, we successfully engineered non-close-packed plasmonic lattices exhibiting hexagonal, square, rectangular, centered rectangular, and oblique symmetries. Beyond characterizing the monolayer structures and their long-range order, we employed extinction spectroscopy alongside finite difference time domain simulations to comprehensively investigate and interpret the plasmonic response of these monolayers. Additionally, we probed the influence of the refractive index environment on the plasmonic properties by two methods: first, by plasma treatment to remove the microgel shells, and second, by overcoating the resulting gold nanoparticle lattices with a homogeneous refractive index polymer film. Graphical Abstract

Chemistry↗
DOE OSTI2025

Enhancing anomalous Hall effect with suppressed ferromagnetism in the SrTiO 3 -confined bilayer heterostructure of ultrathin SrRuO 3 and SrIrO 3

Ferromagnetism is an essential ingredient for anomalous Hall effect. SrRuO 3 is a representative ferromagnetic oxide that exhibits anomalous Hall effect even down to the monolayer confinement limit. Paramagnetic metal SrIrO 3 , on the other hand, becomes an antiferromagnetic insulator when confined to a monolayer. Here, in this study, we show that, by forming a confined bilayer structure of SrRuO 3 and SrIrO 3 monolayers with SrTiO 3 spacers, the anomalous Hall effect is significantly enhanced while the ferromagnetism as well as the perpendicular magnetic anisotropy are suppressed. These effects originate from interfacial Ru–Ir hybridization that modifies the electronic structure in the vicinity of the Fermi level. Our work demonstrates that confined bilayer heterostructure is an useful design for exploring the synergistic combination of interfacial coupling and quantum confinement of complex oxides.

anomalous hall effect↗
DOE OSTI2025

Coverage-dependent structures and thermodynamic stability of intercalated Gd layers beneath buffer-layer graphene on SiC(0001)

Electronic properties of two-dimensional (2D) materials are strongly influenced by their atomic arrangements, making the theoretically-aided characterization of experimentally-synthesized 2D structures crucial. Using first-principles density functional theory, we analyze nearly 200 configurations of intercalated Gd layers beneath buffer-layer graphene on SiC(0001) over a Gd coverage range of 0.01 < θ < 1.2. By fully relaxing selectively-constructed configurations at each coverage within a large, low-strain supercell, we determine the coverage dependence of the chemical potential for intercalated Gd structures. Thermodynamically-preferred configurations below θ ≈ 0.8 form single-atom-thick monolayers, while 3D-like or multilayer structures emerge beyond θ ≈ 0.9. Most structures are amorphous-like, including the configuration at the chemical potential minimum around θ ≈ 0.4. In contrast, a strongly stretched Gd(0001)-like monolayer at θ = 1/3 and a nearly perfect Gd(0001) monolayer at θ = 1 are significantly less favorable with 0.16 eV and 0.82 eV higher chemical potentials above the minimum, respectively. Furthermore, the graphene layer decoupled by intercalated Gd near the chemical potential minimum is significantly flatter compared to its morphology above intercalated 3D structures at higher coverages and nearly isolated Gd atoms in the lowest coverage region. In conclusion, these findings align with our experimental results and underscore the need for further research on this unique intercalated system, which holds significant potential for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning bandgap and energy stability of Organic-Inorganic halide perovskites through surface engineering

Organohalide perovskite with a variety of surface structures and morphologies have shown promising potential owing to the choice of the type of heterostructure dependent stability. We systematically investigate and discuss the impact of 2-dimensional molybdenum-disulphide (MoS 2 ), molybdenum-diselenide (MoSe 2 ), tungsten-disulphide (WS 2 ), tungsten-diselenide (WSe 2 ), boron-nitiride (BN) and graphene monolayers on bandgap and energy stability of organic–inorganic halide perovskites. We found that MAPbI 3 deposited on BN-ML shows room temperature stability (-25 meV ~ 300 K) with an optimal bandgap of ~ 1.68 eV. The calculated absorption coefficient also lies in the visible-light range with a maximum of 4.9 × 10 4 cm –1 achieved at 2.8 eV photon energy. Furthermore, on the basis of our calculations, we suggest that the encapsulation of an organic–inorganic halide perovskite monolayers by semiconducting monolayers potentially provides greater flexibility for tuning the energy stability and the bandgap.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modifying Specific Ion Effects: Studies of Monovalent Ion Interactions with Amines

Specific ion effects in the interactions of monovalent anions with amine groups-one of the hydrophilic moieties found in proteins-were investigated using octadecylamine monolayers floating at air–aqueous solution interfaces. Here, we find that at solution pH 5.7, larger monovalent anions induce a nonzero pressure starting at higher areas/molecules, i.e., a wider “liquid expanded” region in the monolayer isotherms. Using X-ray fluorescence at near total reflection (XFNTR), an element- and surface-specific technique, ion adsorption to the amines at pH 5.7 is confirmed to be ion-specific and to follow the conventional Hofmeister series. However, at pH 4, this ion specificity is no longer observed. We propose that at the higher pH, the amine headgroups are only partially protonated, and large polarizable ions such as iodine are better able to boost amine protonation. At the lower pH, on the other hand, the monolayer is fully protonated, and electrostatic interactions dominate over ion specificity. These results demonstrate that ion specificity can be modified by changing the experimental conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Insights into the Dynamic Interfacial and Bulk Composition of Copper-Modified, Hydrogen-Alloyed, Palladium Nanocubes under Electrocatalytic Conditions

Understanding and controlling the alloying properties of nanomaterials under electrochemical conditions are critically important for fields ranging from energy storage and catalysis to electrochromic window technology. Hydrogen-absorbing nanomaterials, like palladium, are especially interesting due to their ability to reversibly absorb and store hydrogen in their lattice at near-stoichiometric amounts. Palladium’s work function is also significantly deeper than that of most transition metals, which enables electrochemical underpotential deposition of conformal monolayer and submonolayer amounts of transition metals onto the palladium surface. The simultaneous existence of these two properties is unique and opens new and exciting avenues for electrochemical applications. However, the intersection of surface-modified, hydrogen-alloyed palladium nanomaterials is poorly understood, and specifically, how these structures evolve during electrochemical operating conditions remains an open question. Here, we synthesize {100}-terminated palladium nanocubes and deposit between 0.5 and 22 monolayers of copper at the palladium surface. We then electrochemically alloy these surface-modified structures with hydrogen. Using a combination of analytical electrochemistry, spectroscopy, and microscopy, we track the positional evolution of the Cu at the surface of Pd, its impact on palladium’s ability to absorb hydrogen, and copper’s effect on hydrogen evolution electrocatalysis. We show that Cu readily alloys into the palladium nanocube at potentials more negative than the Cu 2+/0 deposition, but a 0.5 monolayer thick copper layer remains at the Pd surface regardless of potential. Finally, we discuss the implications of these findings within the framework of CO 2 reduction catalysis for carbon–carbon bond-forming chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗