SEARCH · Engineering Papers

Results for “Mix Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1973

The 12 GHZ image and sum enhanced mixer diode converter

The development, fabrication, and testing of five image and sum frequency enhanced mixed diode converters are discussed. Design specifications include a RF band of 11.7 to 12.2 GHz, an IF band of 1.0 to 1.5 GHz, an IF return loss of 10 db, band center of 6.2 db, band edge of 6.7 db, LO frequency of 10.7 GHz, LO power of 20 dbm, and a conversion gain of 15.8 db. The converter is also capable of 30 db below desired signals for the third order intermodulation product level for twelve -75 dbm carriers.

Degenford, J. E.↗

NASA NTRS1984

Characterizing Delamination Resistance of Toughened Resin Composites

The delamination resistance of toughened resin composites was studied. Both the edge delamination test (EDT) and the double-cantilever-beam (DCB) test provided a useful ranking of improvements in delamination resistance between brittle and tough resin composites. Several layups were designed for the edge delamination test to cover a wide range of mixed-mode conditions. The DCB and the various layups of the EDT were then used to characterize the interlaminar fracture behavior of brittle and toughened resin composites subjected to both static and cyclic loading.

Obrien, T. K.↗

NASA NTRS1987

Spherical harmonic analysis of steady photospheric flows

A technique is presented in which full disk Doppler velocity measurements are analyzed using spherical harmonic functions to determine the characteristics of the spectrum of spherical harmonic modes and the nature of steady photospheric flows. Synthetic data are constructed in order to test the technique. In spite of the mode mixing due to the lack of information about the motions on the backside of the sun, solar rotation and differential rotation can be accurately measured and monitored for secular changes, and meridional circulations with small amplitudes can be measured. Furthermore, limb shift measurements can be accurately obtained, and supergranules can be fully resolved and separated from giant cells by their spatial characteristics.

Hathaway, David H.↗

NASA NTRS1991

Second order modeling of boundary-free turbulent shear flows

A set of realizable second order models for boundary-free turbulent flows is presented. The constraints on second order models based on the realizability principle are re-examined. The rapid terms in the pressure correlations for both the Reynolds stress and the passive scalar flux equations are constructed to exactly satisfy the joint realizability. All other model terms (return-to-isotropy, third moments, and terms in the dissipation equations) already satisfy realizability. To correct the spreading rate of the axisymmetric jet, an extra term is added to the dissipation equation which accounts for the effect of mean vortex stretching on dissipation. The test flows used in this study are the mixing shear layer, plane jet, axisymmetric jet, and plane wake. The numerical solutions show that the unified model equations predict all these flows reasonably. It is expected that these models would be suitable for more complex and critical flows.

Shih, T.-H.↗

NASA NTRS1991

Second order modeling of boundary-free turbulent shear flows

Shih, T.-H.↗

NASA NTRS1992

Modeling turbulent/chemistry interactions using assumed pdf methods

Two assumed probability density functions (pdfs) are employed for computing the effect of temperature fluctuations on chemical reaction. The pdfs assumed for this purpose are the Gaussian and the beta densities of the first kind. The pdfs are first used in a parametric study to determine the influence of temperature fluctuations on the mean reaction-rate coefficients. Results indicate that temperature fluctuations significantly affect the magnitude of the mean reaction-rate coefficients of some reactions depending on the mean temperature and the intensity of the fluctuations. The pdfs are then tested on a high-speed turbulent reacting mixing layer. Results clearly show a decrease in the ignition delay time due to increases in the magnitude of most of the mean reaction rate coefficients.

Gaffney, R. L, Jr.↗

NASA NTRS1997

Evaluation of an Ejector Ramjet Based Propulsion System for Air-Breathing Hypersonic Flight

A Rocket Based Combined Cycle (RBCC) engine system is designed to combine the high thrust to weight ratio of a rocket along with the high specific impulse of a ramjet in a single, integrated propulsion system. This integrated, combined cycle propulsion system is designed to provide higher vehicle performance than that achievable with a separate rocket and ramjet. The RBCC engine system studied in the current program is the Aerojet strutjet engine concept, which is being developed jointly by a government-industry team as part of the Air Force HyTech program pre-PRDA activity. The strutjet is an ejector-ramjet engine in which small rocket chambers are embedded into the trailing edges of the inlet compression struts. The engine operates as an ejector-ramjet from take-off to slightly above Mach 3. Above Mach 3 the engine operates as a ramjet and transitions to a scramjet at high Mach numbers. For space launch applications the rockets would be re-ignited at a Mach number or altitude beyond which air-breathing propulsion alone becomes impractical. The focus of the present study is to develop and demonstrate a strutjet flowpath using hydrocarbon fuel at up to Mach 7 conditions. Freejet tests of a candidate flowpath for this RBCC engine were conducted at the NASA Lewis Research Center's Hypersonic Tunnel Facility between July and September 1996. This paper describes the engine flowpath and installation, outlines the primary objectives of the program, and describes the overall results of this activity. Through this program 15 full duration tests, including 13 fueled tests were made. The first major achievement was the further demonstration of the HTF capability. The facility operated at conditions up to 1950 K and 7.34 MPa, simulating approximately Mach 6.6 flight. The initial tests were unfueled and focused on verifying both facility and engine starting. During these runs additional aerodynamic appliances were incorporated onto the facility diffuser to enhance starting. Both facility and engine starting were achieved. Further, the static pressure distributions compared well with the results previously obtained in a 40% subscale flowpath study conducted in the LERC 1X1 supersonic wind tunnel (SWT), as well as the results of CFD analysis. Fueled performance results were obtained for the engine at both simulated Mach 6 (1670 K) and Mach 6.6 (1950 K) conditions. For all these tests the primary fuel was liquid JP-10 with gaseous silane (a mixture of 20% SiH4 and 80% H2 by volume) as an ignitor/pilot. These tests verified performance of this engine flowpath in a freejet mode. High combustor pressures were reached and significant changes in axial force were achieved due to combustion. Future test plans include redistributing the fuel to improve mixing, and consequently performance, at higher equivalence ratios.

Thomas, Scott R.↗

NASA NTRS2002

Comparison of Stress Relief Procedures for Cryogenic Aluminum Mirrors

The Infrared Multi-Object Spectrograph (IRMOS) is a facility instrument for the Kitt Peak National Observatory Mayall Telescope (3.8 meter) and an engineering prototype for a potential design for the Next Generation Space Telescope/Multi-Object Spectrograph. IRMOS is a low-to mid-resolution (R = lambda/delta-lambda = 300-3800), near-IR (0.8-2.5 micron) spectrograph which produces simultaneous spectra of approximately 100 objects in its 2.8 x 2.0 arcmin field of view using a commercial MEMS multimirror array device. The instrument operating temperature is 80 K and the design is athermal --- the optical bench and mirrors are machined from aluminum 6061-T651. In spite of its baseline mechanical stress relief, aluminum 6061-T651 harbors some residual stress, which, unless relieved during fabrication, may relieve and distort mirror figure to unacceptable levels at the operating temperature. Other cryogenic instruments using aluminum mirrors for both ground-based and space IR astronomy have employed a variety of heat treatment formulae, with mixed results. We present the results of a test program designed to empirically determine the best stress relief procedure for the IRMOS mirrors. Identical test mirrors with spherical and flat optical prescriptions are processed with five different heat treatment formulae from the literature and compared to samples with out any additional processing. After figuring via diamond turning, the mirrors are tested for figure error and radius of curvature at room temperature and at 80 K for several thermal cycles. The heat treatment procedure for the mirrors that yielded the least and most repeatable change in figure error and radius is applied to the IRMOS mirror blanks. We correlate the results of our optical testing with heat treatment and metallographic data.

Ohl, Raymond G.↗

NASA NTRS2005

Lightning NO(x) Production and Its Consequences for Tropospheric Chemistry

Cloud-resolving case-study simulations of convective transport and lightning NO production have yielded results which are directly applicable to the design of lightning parameterizations for global chemical transport models. In this work we have used cloud-resolving models (the Goddard Cumulus Ensemble Model (GCE) and MMS) to drive an off-line cloud-scale chemical transport model (CSCTM). The CSCTM, in conjunction with aircraft measurements of NO(x) in thunderstorms and ground-based lightning observations, has been used to constrain the amount of NO produced per flash. Cloud and chemistry simulations for several case studies of storms in different environments will be presented. Observed lightning flash rates have been incorporated into the CSCTM, and several scenarios of NO production per intracloud (IC) and per cloud-to-ground (CG) flash have been tested for each storm. The resulting NO(x) mixing ratios are compared with aircraft measurements taken within the storm (typically the anvil region) to determine the most likely NO production scenario. The range of values of NO production per flash (or per meter of lightning channel length) that have been deduced from the model will be shown and compared with values of production in the literature that have been deduced from observed NO spikes and from anvil flux calculations. Results show that on a per flash basis, IC flashes are nearly as productive of NO as CG flashes. This result simplifies the lightning parameterization for global models (ie., an algorithm for estimating the ICKG ratio is not necessary). Vertical profiles of lightning NOx mass at the end of the 3-D storm simulations have been summarized to yield suggested profiles for use in global models. Estimates of mean NO production per flash vary by a factor of three from one simulated storm to another. When combined with the global flash rate of 44 flashes per second from NASA's Optical Transient Detector (OTD) measurements, these estimates and the results from other techniques yield global NO production rates of 2-9 TgN/year. Simulations of the photochemistry over the 24 hours following a storm has been performed to determine the additional ozone production which can be attributed to lightning NO. Convective transport of HO(x), precursors leads to the generation of a HO(x), plume which substantially aids the downstream ozone production.

Pickering, Kenneth E.↗

NASA NTRSDate not supplied

Predictions of the Azimuthal Variation of the Noise from Chevron Jets using an Acoustic Analogy

An existing acoustic analogy formulation is used to make predictions of the turbulent mixing noise from a series of chevron jets tested at NASA Glenn Research Center. Reynolds-averaged Navier-Stokes solutions are used as input to provide the mean flow and turbulence quantities needed to compute the Green’s function and parameterize the source model. The Green’s function for the non-axisymmetric mean flows generated by these nozzles is computed using a second-order finite volume method. A slightly modified version of an existing source model originally developed for round jets is used to assess its capability in these non-axisymmetric flows. Prediction results are compared with experimental data for a range of azimuthal orders of the nozzle geometry and flow speeds. The results show that the RANS-based acoustic analogy prediction method is able to capture the observed azimuthal variation of the sound field fairly well at relatively low jet exit velocities. At higher speeds, the prediction method still captures the observed trends in azimuthal directivity but not the absolute levels, particularly at higher frequencies. Areas for potential improvement of the method are suggested.

Jet Noise↗

NASA NTRSDate not supplied

Predictions of the Azimuthal Variation of the Noise from Chevron Jets using an Acoustic Analogy

Jet Noise↗

NASA NTRS2024

IVGen Mini Techport May 2024

Intravenous (IV) fluids are an important treatment modality for multiple medical conditions that have the potential to occur during Mars missions and that may lead to adverse crew health and mission outcomes without appropriate treatment. However, carrying sufficient volumes of IV fluids with adequate shelf life to support such missions is currently not feasible due to anticipated mass and volume constraints of future vehicles and the relatively short shelf-life of terrestrial IV fluids. The goal of the IntraVenous Fluid Generation for Exploration Missions, Miniaturized, (IVGen Mini) project is to develop a low mass and volume IV fluid generation device that can produce IV fluids in situ and that reduces the need to launch and store large quantities of IV fluids. It builds on the original IVGEN system developed by the Human Research Program’s Exploration Medical Capability Element that successfully demonstrated the capability to produce in-situ IV fluids aboard the ISS in 2010 using an ISS potable water source. Flight demonstration objectives for this system included purification via packed bed resin, bubble removal, sterilization, passive mixing in microgravity, and United States Pharmacopeia (USP) tested compliance. The project will culminate in a flight technical demonstration on the ISS in 2025/2026.

Courtney M Schkurko↗

NASA NTRS1992

Single element injector testing for STME injector technology

An oxidizer-swirled coaxial element injector is being developed for application in the liquid oxygen/gaseous hydrogen Space Transportation Main Engine (STME) for the National Launch System (NLS) vehicle. This paper reports on the first two parts of a four part single injector element study for optimization of the STME injector design. Measurements of Rupe mixing efficiency and atomization characteristics are reported for single element versions of injection elements from two multielement injectors that have been recently hot fire tested. Rather than attempting to measure a definitive mixing efficiency or droplet size parameters of these injector elements, the purpose of these experiments was to provide a baseline comparison for evaluating future injector element design modifications. Hence, all the experiments reported here were conducted with cold flow simulants to nonflowing, ambient conditions. Mixing experiments were conducted with liquid/liquid simulants to provide economical trend data. Atomization experiments were conducted with liquid/gas simulants without backpressure. The results, despite significant differences from hot fire conditions, were found to relate to mixing and atomization parameters deduced from the hot fire testing, suggesting that these experiments are valid for trend analyses. Single element and subscale multielement hot fire testing will verify optimized designs before committing to fullscale fabrication.

Hulka, J.↗

NASA NTRS2008

Igniters for Liquid Oxygen/Liquid Methane Technology Development

As part of NASA's technology development of liquid methane / liquid oxygen engines for future exploration missions, two different igniters were recently studied at NASA Marshall Space Flight Center. The first igniter tested was an impinging injection, spark-initiated torch igniter, and the second was a microwave-generated plasma igniter. The purpose of the ignition tests was to define the ignition limits under vacuum conditions and characterize the transient start-up performance as a function of propellant mixture ratio (MR), mass flow rates, inlet temperatures, and pre-ignition chamber pressure. In addition, for the impinging igniter two different spark plugs were tested, and for the microwave igniter the magnetron filament warm-up time and the magnetron input power were both varied. The results gathered from these tests indicated that the impinging igniter is capable of operating over an MR range of 2 - 27, with methane and oxygen inlet temperatures as low as -161 F and -233 F, respectively. The microwave igniter was tested over an MR range of 2 - 9, with methane and oxygen inlet temperatures as low as -90 F and -200 F, respectively. The microwave igniter achieved ignition over this range, although an upper ignition limit was determined for the oxidizer mass flow rate. In general, the torch exhaust temperatures for the microwave igniter were not as high as those attained with the impinging igniter. The microwave igniter, however, was hot-fired 17 times and was still operational, whereas the impinging igniter spark plugs experienced thermal shock and erosion over nine hot-fire tests. It was concluded that for the microwave igniter better mixing of the propellants might be required in order to both raise the torch exhaust temperature and decrease the required magnetron input power, and for the impinging igniter the spark plug position within the igniter chamber should be varied in future tests to identify a more optimal location. All of the igniter tests were supported by the Propulsion & Cryogenics Advanced Development project, which is part of NASA's Exploration Technology Development Program.

Osborne, Robin J.↗

DOE OSTI2026

Models and Algorithms for Equilibrium Analysis of Mixed-Material Nucleic Acid Systems

Dynamic programming algorithms within the NUPACK software suite enable analysis of equilibrium base-pairing properties for complex and test tube ensembles containing arbitrary numbers of interacting nucleic acid strands. Currently, calculations are limited to single-material systems that are either all-RNA or all-DNA. Here, to enable analysis of mixed-material systems that are critical for modern applications in vitro, in situ, and in vivo, we develop physical models and dynamic programming algorithms that allow the material of the system to be specified at nucleotide resolution. Free energy parameter sets are constructed for both RNA/DNA and RNA/2'OMe-RNA mixed-material systems by combining available empirical mixed-material parameters with single-material parameter sets to enable treatment of the full complex and test tube ensembles. New dynamic programming recursions account for the material of each nucleotide throughout the recursive process. For a complex with N nucleotides, the mixed-material dynamic programming algorithms maintain the O(N 3 ) time complexity of the single-material algorithms, enabling efficient calculation of diverse physical quantities over complex and test tube ensembles (e.g., complex partition function, equilibrium complex concentrations, equilibrium base-pairing probabilities, minimum free energy secondary structure(s), and Boltzmann-sampled secondary structures) at a cost increase of roughly 2.0-3.5×. The results of existing single-material algorithms are exactly reproduced when applying the new mixed-material algorithms to single-material systems. Accuracy is significantly enhanced using mixed-material models and algorithms to predict RNA/DNA and RNA/2'OMe-RNA duplex melting temperatures from the experimental literature as well as RNA/DNA melt profiles from new experiments. In conclusion, mixed-material analyses can be performed online using the NUPACK web app (www.nupack.org) or locally using the NUPACK Python module.

2′OMe-RNA↗

DOE OSTI2021

Evaluation of alkali–silica reaction damage in concrete using linear and nonlinear resonance techniques

Here in this study, the initiation and development of alkali–silica reaction (ASR) in concrete prisms containing reactive coarse (RCA) and reactive fine (RFA) aggregates were monitored over one year using linear and nonlinear resonance techniques. Although the linear resonance test could detect initiation and development of ASR damage in RCA specimens, it failed in the RFA specimens. Petrographic analysis confirmed the presence of early-stage ASR damage and the presence of different microcracking patterns in the RFA and RCA specimens, which may explain differences in the linear resonance data. For both RCA and RFA specimens, the nonlinear resonance test results were able to detect the initiation of ASR damage and showed a strong correlation with the ASR expansion for all specimens from different mix designs. The results demonstrate the high sensitivity of the nonlinear resonance test and its potential for quantitative evaluation of the ASR damage state of concrete specimens without a baseline measurement.

36 MATERIALS SCIENCE↗

NASA NTRS2017

An Initial Study of the Fundamentals of Ice Crystal Icing Physics in the NASA Propulsion Systems Laboratory

This presentation shows results from an initial study of the fundamental physics of ice-crystal ice accretion using the NASA Propulsion Systems Lab (PSL). Ice accretion due to the ingestion of ice-crystals is being attributed to numerous jet-engine power-loss events. The NASA PSL is an altitude jet-engine test facility which has recently added a capability to inject ice particles into the flow. NASA is evaluating whether this facility, in addition to full-engine and motor-driven-rig tests, can be used for more fundamental ice-accretion studies that simulate the different mixed-phase icing conditions along the core flow passage of a turbo-fan engine compressor. The data from such fundamental accretion tests will be used to help develop and validate models of the accretion process. The present study utilized a NACA0012 airfoil. The mixed-phase conditions were generated by partially freezing the liquid-water droplets ejected from the spray bars. This presentation shows data regarding (1) the freeze out characteristics of the cloud, (2) changes in aerothermal conditions due to the presence of the cloud, and (3) the ice accretion characteristics observed on the airfoil model. The primary variable in this test was the PSL plenum humidity which was systematically varied for two duct-exit-plane velocities (85 and 135 ms) as well as two particle size clouds (15 and 50 m MVDi). The observed clouds ranged from fully glaciated to fully liquid, where the liquid clouds were at least partially supercooled. The air total temperature decreased at the test section when the cloud was activated due to evaporation. The ice accretions observed ranged from sharp arrow-like accretions, characteristic of ice-crystal erosion, to cases with double-horn shapes, characteristic of supercooled water accretions.

upwind schemes↗

NASA NTRS2017

An Initial Study of the Fundamentals of Ice Crystal Icing Physics in the Nasa Propulsion Systems Laboratory

This paper presents results from an initial study of the fundamental physics of ice-crystal ice accretion using the NASA Propulsion Systems Lab (PSL). Ice accretion due to the ingestion of ice-crystals is being attributed to numerous jet-engine power-loss events. The NASA PSL is an altitude jet-engine test facility which has recently added a capability to inject ice particles into the flow. NASA is evaluating whether this facility, in addition to full-engine and motor-driven-rig tests, can be used for more fundamental ice-accretion studies that simulate the different mixed-phase icing conditions along the core flow passage of a turbo-fan engine compressor. The data from such fundamental accretion tests will be used to help develop and validate models of the accretion process. The present study utilized a NACA0012 airfoil. The mixed-phase conditions were generated by partially freezing the liquid-water droplets ejected from the spray bars. This paper presents data regarding (1) the freeze out characteristics of the cloud, (2) changes in aerothermal conditions due to the presence of the cloud, and (3) the ice accretion characteristics observed on the airfoil model. The primary variable in this test was the PSL plenum humidity which was systematically varied for two duct-exit-plane velocities (85 and 135 ms) as well as two particle size clouds (15 and 50 m MVDi). The observed clouds ranged from fully glaciated to fully liquid, where the liquid clouds were at least partially supercooled. The air total temperature decreased at the test section when the cloud was activated due to evaporation. The ice accretions observed ranged from sharp arrow-like accretions, characteristic of ice-crystal erosion, to cases with double-horn shapes, characteristic of supercooled water accretions.

Evaporative Cooling↗