Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FIELDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-resolution ultra-low field magnetic resonance imaging with a high-sensitivity sensing coil

We present high-resolution magnetic resonance imaging (MRI) at ultra-low field (ULF) with a proton Larmor frequency of around 120 kHz. The key element is a specially designed high-sensitivity sensing coil in the shape of a solenoid with a few millimeter gap between windings to decrease the proximity effect and, hence, increase the coil’s quality ([Formula: see text]) factor and sensitivity. External noise is strongly suppressed by enclosing the sensing coil in a copper cylindrical shield, large enough not to negatively affect the coil’s [Formula: see text] factor and sensitivity, measured to be 217 and 0.47 fT/Hz[Formula: see text], respectively. To enhance small polarization of proton spins at ULF, a strong pulsed 0.1 T prepolarization field is applied, making the signal-to-noise ratio (SNR) of ULF MRI sufficient for high-quality imaging in a short time. We demonstrate ULF MRI of a copper sulfate solution phantom with a resolution of [Formula: see text] and SNR of 10. The acquisition time is 6.3 min without averaging. The sensing coil size in the current realization can accommodate imaging objects of 9 cm in size, sufficient for hand, and it can be further increased for human head imaging in the future. Since the in-plane resolution of [Formula: see text] is typical in anatomical medical imaging, this ULF MRI method can be an alternative low-cost, rapid, portable method for anatomical medical imaging of the human body or animals. This ULF MRI method can supplement other MRI methods, especially when such methods are restricted due to high cost, portability requirement, imaging artifacts, and other factors.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Magnetic Field Measurements of First Pre-series Full -Length 4.2 m Quadrupole MQXFA03 Using PCB Rotating Coils for the Hi Hi-Lumi LHC Project

The U.S. Hi-Lumi LHC Accelerator Upgrade Project (AUP) and CERN have joined efforts to develop high field quad-rupoles for the Hi-Lumi LHC upgrade. The US national laborato-ries in the AUP project will deliver 10 magnets and each cryostat has two 4.2 m high gradient quadrupoles in it. These magnets are made of Nb3Sn conductors, with large aperture (150 mm) and in-tegrated gradient of 556.9 T. This paper reports on magnetic measurements performed during the vertical test at Brookhaven National Laboratory (BNL) in 2019-2020. A warm measurement Z-Scan (+/- 15 A) with 42 Z-positions before cool-down was per-formed at BNL. The results were directly compared to field data measured at LBNL during magnet assembly. Measured harmonics and magnetic center offsets (ΔX and ΔY) have provided timely and informative diagnostics on the magnet structure’s shape at both warm and cold temperatures. A new centering fixture was de-signed and added to better center the warm bore tube which con-tains the rotating coil probe. After the quench training to 16.47 kA was achieved, a complete set of cold measurements (Z-Scan at 16.47 kA and I-Scan from 960 A to 16.47 kA and back to 960 A) was made. Periodic axial variation of allowed and nonallowed harmonics was observed which is related to the coil radial and/or mid-plane variations along the magnet axis. Overall, the average harmonics in the straight section are within the required field boundaries.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Faster ablative Kelvin–Helmholtz instability growth in a magnetic field

Shear flows along a plasma interface will quickly grow unstable due to the Kelvin–Helmholtz instability. If there is a concurrent temperature gradient across the interface, higher modes are stabilized by the thermal diffusion. These ablative effects must be considered in, for example, jet features in inertial confinement fusion hot-spots, or plasma plumes in young supernovae. We show that magnetization of the plasma can greatly affect the instability, even if magnetic pressure is small. This is because electrons are localized by their gyromotion, reducing the heat flux and material ablation. We use a two-dimensional numerical extended-magnetohydrodynamics approach to assess this effect for dense fusion conditions. In comparison with the unmagnetized case, self-generated Biermann fields make only a minor difference to growth rates. However, simulations with a large 50 kT external field found that the growth rate of the least stable mode increased by 40%. In conclusion, this has implications for mix processes in Z-pinches and magnetized inertial confinement fusion concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Phase diagram of YbZnGaO4 in applied magnetic field

Abstract Recently, Yb-based triangular-lattice antiferromagnets have garnered significant interest as possible quantum spin-liquid candidates. One example is YbMgGaO 4 , which showed many promising spin-liquid features, but also possesses a high degree of disorder owing to site-mixing between the non-magnetic cations. To further elucidate the role of chemical disorder and to explore the phase diagram of these materials in applied field, we present neutron scattering and sensitive magnetometry measurements of the closely related compound, YbZnGaO 4 . Our results suggest a difference in magnetic anisotropy between the two compounds, and we use key observations of the magnetic phase crossover to motivate an exploration of the field- and exchange parameter-dependent phase diagram, providing an expanded view of the available magnetic states in applied field. This enriched map of the phase space serves as a basis to restrict the values of parameters describing the magnetic Hamiltonian with broad application to recently discovered related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

High-field magnetic phase diagrams of the 𝑅⁢Mn 6 ⁢Sn 6 (𝑅=Gd–Tm) kagome metals

𝑅⁢Mn 6 ⁢Sn 6 (𝑅=Y, Gd–Lu) kagome metals are promising materials hosting flat electronic bands and Dirac points that interact with magnetism. The coupling between the two magnetic 𝑅 and Mn sublattices can drive complex magnetic states with potential consequences for spin and charge transport and other topological properties. Here, in this work, we use a detailed magnetic Hamiltonian to calculate and predict the magnetic phase diagrams for 𝑅⁢Mn 6 ⁢Sn 6 kagome metals within the mean-field approximation. These calculations reveal a variety of collinear, noncollinear, and noncoplanar phases that arise from competition between various interlayer magnetic exchange interactions and magnetic anisotropies of the 𝑅 and Mn ions. We enumerate these phases and their magnetic space groups for future analysis of their impact on topological and trivial bands near the Fermi surface.

kagome metal↗
DOE OSTI2024

Advanced silver sheathed 2212/Ag wire for high field magnets

Commercial High Temperature Superconductors (HTS) are all tape shaped (widths > 10 times thickness), because achieving useful current densities required them to be processed into this form, even though this also makes it more problematic to use them in some important coil types. Our product is based on 2212 (Bi2Sr2CaCu2O8) and it is the only HTS that can be processed into high current density wire forms that are similar to proven low temperature superconductors (LTS), while surpassing them in field generating and operating temperature capability. Required now are higher current density, lower cost and longer length 2212 wires to enable broad utilization where HTS tape usage is problematic. In Phase II we developed vital cost-lowering process technology elements and we test-processed longer wires with the standard commercial design as baseline and benchmark for our lower cost, higher quality and longer piece length wire advances. By initial application of Jc-boosting wire features, these wires exhibited significant performance increases. This Phase IIA program has now developed and qualified these technologies for lower cost, higher quality and longer piece length manufacturing in combination with current density-boosting wire features, paving the way to manufacturing capability that is essential for cost-effective commercial utilization of 2212 wire. Technical areas included automated, high uniformity powder packing, advanced drawing, annealing, lubricant cleaning and filament bundling, followed by integration of higher current density wire features and process variations.

17 WIND ENERGY↗
DOE OSTI2025

Measurement of the Kicker transient magnetic field in the Muon g-2 Experiment at Fermilab

The Muon g-2 experiment at Fermilab has the main goal to measure the muon anomalous magnetic moment $a_µ = \frac{g−2}{2}$ to a precision of 140 parts per billion (ppb), which means 4 times improvement in precision with respect to the final result from BNL: a µ (expt.B N L) = 11659208.0(6.3)×10 −10 (540 ppb) So far only RUN1 data have been analyzed showing the following improvement: a µ (expt.RU N1) = 116592061×10 −11 (465 ppb) In this report I summarize the work done at the g-2 experiment during my summer internship at Fermilab where I worked on the attempt to estimate the kicker transient field contribution in the Muon g-2 experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Insights into the Mechanism of Chiral‐Induced Spin Selectivity: The Effect of Magnetic Field Direction and Temperature

Chiral oligopeptide monolayers are adsorbed on a ferromagnetic surface and their magnetoresistance is measured as a function of the angle between the magnetization of the ferromagnet and the surface normal. These measurements are conducted as a function of temperature for both enantiomers. The angle dependence is found to follow a changing trend with a period of 360°. Quantum simulations reveal that the angular distribution can be obtained only if the monolayer has significant effective spin orbit coupling (SOC), that includes contribution from the vibrations. The model shows that SOC only in the leads cannot reproduce the observed angular dependence. The simulation can reproduce the experiments if it included electron–phonon interactions and dissipation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tunable anisotropy of co-based nanocomposites for magnetic field sensing and inductor applications

A method includes producing an amorphous precursor to a nanocomposite, performing devitrification of the amorphous precursor, forming, based on the devitrification, the nanocomposite comprising an induced magnetic anisotropy, and for a first portion of the nanocomposite, determining a desired value of a magnetic permeability of the first portion, tuning, based on the desired value, the induced magnetic anisotropy for the first portion, and adjusting, based on the tuning of the induced magnetic anisotropy of the first portion, a first magnetic permeability value of the first portion of the nanocomposite, wherein the first magnetic permeability value is different from a second magnetic permeability value for a second portion of the nanocomposite.

Leary, Alex M.↗
DOE OSTI2021

Local measurement of internal magnetic field fluctuations in high-performance tokamaks

This is the final report for DOE Grant DE-FG02-08ER54984. The overall goal of this project was to develop the cross-polarization scattering (CPS) diagnostic to measure core localized magnetic turbulence in fusion research devices. Section 1 provides a brief overview of project objectives and accomplishments. Section 2 gives a more detailed description of the Project accomplishments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Isotropic parallel antiferromagnetism in the magnetic field induced charge-ordered state of $\mathrm{Sm Ru_4 P_{12}}$ caused by $p - f$ hybridization

Nature of the field-induced charge-ordered phase (phase II) of SmRu 4 P 12 has been investigated by resonant x-ray diffraction (RXD) and polarized neutron diffraction (PND), focusing on the relationship between the atomic displacements and the antiferromagnetic (AFM) moments of Sm. From the analysis of the interference between the nonresonant Thomson scattering and the resonant magnetic scattering, combined with the spectral function obtained from x-ray magnetic circular dichroism, it is shown that the AFM moment of Sm prefers to be parallel to the field (m AF ∥ H), giving rise to large and small moment sites around which the P 12 and Ru cage contract and expand, respectively. This is associated with the formation of the staggered ordering of the Γ 7 -like and Γ 8 -like crystal-field states, providing a strong piece of evidence for the charge order. PND was also performed to obtain complementary and unambiguous conclusion. In addition, isotropic and continuous nature of phase II is demonstrated by the field-direction invariance of the interference spectrum in RXD. Finally, crucial role of the p-f hybridization is shown by resonant soft x-ray diffraction at the P K edge (1s↔3p), where we detected a resonance due to the spin polarized 3p orbitals reflecting the AFM order of Sm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Modeling plasma response to non-axisymmetric magnetic field perturbations in tokamak boundaries

The primary goal of this project is to provide physics insight into models that elucidate the mechanisms responsible for controlling the performance of H-mode plasmas and edge localized mode (ELM) stability when subjected to intrinsic and applied non-axisymmetric magnetic perturbations. The overall goal is to facilitate the development of physics-based criteria for the design of magnetic coils to be used for ELM suppression and H-mode pedestal control in future burning plasma devices such as ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

First-principles theory of the Dirac semimetal Cd 3 As 2 under Zeeman magnetic field

Time-reversal broken Weyl semimetals have attracted much attention recently, but certain aspects of their behavior, including the evolution of their Fermi surface topology and anomalous Hall conductivity with Fermi-level position, have remained underexplored. A promising route to obtain such materials may be to start with a nonmagnetic Dirac semimetal and break time-reversal symmetry via magnetic doping or magnetic proximity. Here we explore this scenario in the case of the Dirac semimetal Cd 3 As 2 , based on first-principles density-functional calculations and subsequent low-energy modeling of Cd 3 As 2 in the presence of a Zeeman field applied along the symmetry axis. We clarify how each four-fold degenerate Dirac node splits into four Weyl nodes, two with chirality ±1 and two higher-order nodes with chirality ±2. Using a minimal k · p model Hamiltonian whose parameters are fit to the first-principles calculations, we detail the evolution of the Fermi surfaces and their Chern numbers as the Fermi energy is scanned across the region of the Weyl nodes at fixed Zeeman field. We also compute the intrinsic anomalous Hall conductivity as a function of Fermi-level position, finding a characteristic inverted-dome structure. Cd 3 As 2 is especially well suited to such a study because of its high mobility, but the qualitative behavior revealed here should be applicable to other Dirac semimetals as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Tunable anisotropy of co-based nanocomposites for magnetic field sensing and inductor applications

A method includes producing an amorphous precursor to a nanocomposite, the amorphous precursor comprising a material that is substantially without crystals not exceeding 20% volume fraction; performing devitrification of the amorphous precursor, wherein the devitrification comprises a process of crystallization; forming, based on the devitrification, the nanocomposite with nano-crystals that contains an induced magnetic anisotropy; tuning, based on one or more of composition, temperature, configuration, and magnitude of stress applied during annealing and modification, the magnetic anisotropy of the nanocomposite; and adjusting, based on the tuned magnetic anisotropy, a magnetic permeability of the nanocomposite.

Leary, Alex M.↗
DOE OSTI2024

Trapping and actively transporting single particles of arbitrary properties in low-pressure rf plasmas with and without a magnetic field

We report the experimental realization of optical trapping and controlled manipulations of single particles of arbitrary properties, e.g., nano- to micrometer in size, transparent spheres to strongly light absorbing nonspherical particles, in low-pressure rf plasmas. First, we show optical trapping and transport of single particles in an unmagnetized rf plasma. Then, we show similar observations in a weakly magnetized rf plasma. This is the first demonstration of actively transporting (pushing and pulling) light-absorbing, nonspherical single particles in plasmas. The result suggests that optically trapped, actively controlled, single plasma dust particles (not limited to those externally sampled spheres) could be an in situ micro-probe for dusty plasma and magnetized dusty plasma diagnostics.

Physics↗