Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Ultraviolet light assisted periodic poling of near-stoichiometric, magnesium-doped lithium niobate crystals

Ferroelectric domain reversal by application of electric-fields to near-stoichiometric lithium niobate crystals containing 1.3 mol % magnesium is investigated. The +z-face of the crystal is coated with a patterned photoresist layer that yields both a structured ultraviolet light absorber and a structured electric insulator. Periodic ferroelectric domain inversion in a z-cut crystal is then achieved by combination of illumination with light of the wavelength of 334 nm that reduces the coercive field strength inside the crystal by up to 50% and application of an external electrical field. Domain patterns with a period length of 10 {mu}m are fabricated in a 500 {mu}m thick crystal.

36 MATERIALS SCIENCE↗

Modelling the Thermo-Mechanical Behavior of Magnesium Alloys during Indirect Extrusion

One of the basic metal forming process for semi-finished products is extrusion. Since extrusion involves complex thermo-mechanical and multiaxial loading conditions resulting in large strains, high strain rates and an increase in temperature due to deformation, a proper yield criterion and hardening law should be used in the numerical modelling of the process. A phenomenological model based on a plastic potential has been proposed that takes strain, strain rate and temperature dependency on flow behaviour into consideration. A hybrid methodology of experiment and finite element simulation has been adopted in order to obtain necessary model parameters. The anisotropy/asymmetry in yielding was quantified by tensile and compression tests of specimens prepared from different directions. The identification of the corresponding model parameters was performed by a genetic algorithm. A fully coupled thermo-mechanical analysis has been used in extrusion simulations for calculation of the temperature field by considering heat fluxes and heat generated due to plastic deformation. The results of the approach adopted in this study appeared to be successful showing promising predictions of the experiments and thus may be extended to be applicable to other magnesium alloys or even other hcp metals.

36 MATERIALS SCIENCE↗

Effect Of Neodymium Substitution In Structural Characteristics Of Magnesium Ferrite

The effect of Nd{sup 3+} substitution on the structural properties of Magnesium ferrite was studied in the series MgNd{sub x}Fe{sub 2-x}O{sub 4}, where x = 0 to 0.3 in steps of 0.05. The series was prepared by sol-gel technique which is one of the novel technique to prepare nanosized samples. Structural characterization was done using X-ray diffractometer and Fourier Transform Infrared Spectrometer. XRD analysis reveals the prepared samples are single phasic till x = 0.2. From x0 = .25, a secondary phase of iron neodymium oxide appears along with the spinel phase. Particle size calculation shows the prepared samples are in the 9nm to 11 nm regime. Lattice parameter was found to increase with concentration of Nd. XRD and FTIR analysis confirmed spinel structure of the prepared samples. XRF result shows the expected composition of prepared samples. The frequency dependence of the dielectric constant in the range 100 Hz--120MHz was also studied

36 MATERIALS SCIENCE↗

Fabrication of faceted nanopores in magnesium

In this paper, using high resolution transmission electron microscopy, we showed the fabrication of faceted nanopores with various shapes in magnesium by focused electron beam (e-beam). The characteristics of nanopore shapes and the crystallographic planes corresponding to the edges of the nanopores were discussed in detail. Interestingly, by manipulating the e-beam (e.g., irradiation direction and duration), the nanopore shape and size could be effectively controlled along different directions. Our results provide important insight into the nanopore patterning in metallic materials and are of fundamental importance concerning the relevant applications, such as nanopore-based sensor, etc.

36 MATERIALS SCIENCE↗

The effect of magnesium added at C{sub 60}/Rubrene heterointerfaces

This study examines the effect of adding magnesium (Mg) at C{sub 60}/rubrene heterointerfaces by using synchrotron-radiation photoemission spectroscopy. The heterointerface was obtained by depositing C{sub 60} on a 4-Å Mg/rubrene surface. The photoemission spectra showed that the added Mg preferentially interacts with and transfers negative charges to C{sub 60}. The interfacial dipole potential was significantly enlarged, as was the separation between the lowest unoccupied molecular orbital of C{sub 60} and the highest occupied molecular orbital of rubrene. The results demonstrate that the addition of Mg should be an effective method for improving the efficiency of light- and current-generating devices.

36 MATERIALS SCIENCE↗

Magnesium oxide nanoparticles on green activated carbon as efficient CO{sub 2} adsorbent

This study was focused on carbon dioxide (CO{sub 2}) adsorption ability using Magnesium oxide (MgO) nanoparticles and MgO nanoparticles supported activated carbon based bamboo (BAC). The suitability of MgO as a good CO{sub 2} adsorbent was clarified using Thermodynamic considerations (Gibbs-Helmholtz relationship). The ΔH and ΔG of this reaction were − 117.5 kJ⋅mol{sup −1} and − 65.4 kJ⋅mol{sup −1}, respectively, at standard condition (298 K and 1 atm). The complete characterization of these adsorbent were conducted by using BET, XRD, FTIR, TEM and TPD−CO{sub 2}. The surface areas for MgO nanoparticles and MgO nanoparticles supported BAC were 297.1 m{sup 2}/g and 702.5 m{sup 2}/g, respectively. The MgO nanoparticles supported BAC shown better physical and chemical adsorption ability with 39.8 cm{sup 3}/g and 6.5 mmol/g, respectively. The combination of MgO nanoparticle and BAC which previously prepared by chemical method can reduce CO{sub 2} emissions as well as better CO{sub 2} adsorption behavior. Overall, our results indicate that nanoparticles of MgO on BAC posses unique surface chemistry and their high surface reactivity coupled with high surface area allowed them to approach the goal as an efficient CO{sub 2} adsorbent.

36 MATERIALS SCIENCE↗

Gas sensing properties of magnesium doped SnO{sub 2} thin films in relation to AC conduction

Conducting magnesium doped (0 to 1.5 wt %) tin oxide thin films prepared by Spray Pyrolysis technique achieved detection of 1000 ppm of LPG. The films deposited at 304 °C exhibit an enhanced response at an operating temperature of 350 °C. The microstructural properties are studied by means of X-ray diffraction. AC conductivity measurements are carried out using precision LCR meter to analyze the parameters that affect the variation in sensing. The results are correlated with compositional parameters and the subsequent modification in the charge transport mechanism facilitating an enhanced LPG sensing action.

36 MATERIALS SCIENCE↗

Ab initio calculations on magnetism induced by composite defects in magnesium oxide

The local magnetic state induced by the composite defects, composed of an oxygen vacancy and a nitrogen substituting oxygen, in magnesium oxide has been studied by using ab initio calculation based on density functional theory. The calculated results show that local magnetic moment can be induced by the composite defects around the oxygen vacancy, when the exchange split of the oxygen vacancy is enhanced either by the hybridization between the N-p and nearest neighbor O-p orbitals or by applying on-site Coulomb repulsion (U) and exchange interaction (J). We show that the magnetic state induced by the composite defect is energetically more stable than the non-magnetic state. In addition, we show that the U and J applied on the p-orbitals of N and O atoms may significantly impact the calculated magnetic state of the composite defect, resulting in magnetic state for a configuration that is non-magnetic by generalized gradient approximation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The electric dipole moment of magnesium deuteride, MgD

The (0,0) A{sup 2}Π–X {sup 2}Σ{sup +} band of a cold molecular beam sample of magnesium monodeuteride, MgD, has been recorded field-free and in the presence of a static electric field of up to 11 kV/cm. The lines associated with the lowest rotational levels are detected for the first time. The field-free spectrum was analyzed to produce an improved set of fine structure parameters for the A{sup 2}Π (v = 0) state. The observed electric field induced splittings and shifts were analyzed to produce permanent electric dipole moments, μ{sup -vector}{sub el} of 2.567(10)D and 1.31(8)D for A{sup 2}Π (v = 0) and X{sup 2}Σ{sup +}(v = 0) states, respectively. The recommended value for μ{sup -vector}{sub el}(X{sup 2}Σ{sup +} (v = 0)) for MgH, based upon the measured value for MgD, is 1.32(8)D.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal conductivity of bulk GaN—Effects of oxygen, magnesium doping, and strain field compensation

The effect of oxygen doping (n-type) and oxygen (O)-magnesium (Mg) co-doping (semi-insulating) on the thermal conductivity of ammonothermal bulk GaN was studied via 3-omega measurements and a modified Callaway model. Oxygen doping was shown to significantly reduce thermal conductivity, whereas O-Mg co-doped GaN exhibited a thermal conductivity close to that of undoped GaN. The latter was attributed to a decreased phonon scattering rate due the compensation of impurity-generated strain fields as a result of dopant-complex formation. The results have great implications for GaN electronic and optoelectronic device applications on bulk GaN substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and optical study of barium magnesium aluminate blue phosphors

Europium doped barium magnesium aluminate (BaMgAl{sub 10}O{sub 17}:Eu{sup 2+}) phosphor was prepared via solution combustion method at 550°C using urea as a fuel. Morphological and optical properties of the prepared sample was studied by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Photoluminescence spectroscopy (PL). XRD result showed the formation of pure phase BaMgAl{sub 10}O{sub 17}(JCPDS 26-0163) along with an additional phase BaAl{sub 2}O{sub 4}(JCPDS 01-082-1350). TEM image indicated the formation of faceted particles with average particle size 40 nm. From PL spectra, a broad emission band obtained at about 450 nm attributes to 4f{sup 6} 5d → 4f{sup 7} transition of Eu{sup 2+} which lies in the blue region of the visible spectrum.

36 MATERIALS SCIENCE↗

Structural, dielectric and magnetic behavior of nanocrystalline zinc substituted magnesium ferrite

Zinc substituted magnesium ferrites Zn{sub 0.2}Mg{sub 0.8}Fe{sub 2}O{sub 4} and Zn{sub 0.4}Mg{sub 0.6}Fe{sub 2}O{sub 4} were prepared by sol-gel auto combustion method. Rietveld profile refinement of the XRD patterns confirms the formation of a cubic spinel structure in single phase. The dielectric properties viz. dielectric constant and dielectric loss tangent tanδ increase with increasing temperature. The dielectric behavior is explained by using the mechanism of polarization process, which is correlated to that of electron exchange interaction. The saturation magnetization, coercivity and remanent magnetization decreases appreciably with increase in Zn which could be attributed to change in cation distribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The deformation and acoustic emission of aluminum-magnesium alloy under non-isothermal thermo-mechanical loading

The following study investigates the deformation behavior and acoustic emission in aluminum-magnesium alloy under conditions of non-isothermal thermo-mechanical loading. The accumulation of deformation in the alloy, in conditions of change from room temperature to 500°C, occurs in two temperature intervals (I, II), characterized by different rates of deformation. The rate of deformation accumulation is correlated with acoustic emission. With load increasing in cycles from 40 to 200 MPa, the value of the boundary temperature (T{sub b}) between intervals I and II changes non-monotonically. In cycles with load up to 90 MPa, the T{sub b} value increases, while an increase up to 200 MPa makes T{sub b} shift toward lower temperatures. This suggests that the shift of boundaries in the region of low temperatures and the appearance of high-amplitude pulses of acoustic emission characterize the decrease of the magnitude of thermal fluctuations with increasing mechanical load, leading to the rupture of interatomic bonds in an elementary deformation act.

36 MATERIALS SCIENCE↗

Surface plasmon coupled chemiluminescence during adsorption of oxygen on magnesium surfaces

The dissociative adsorption of oxygen molecules on magnesium surfaces represents a non-adiabatic reaction exhibiting exoelectron emission, chemicurrent generation, and weak chemiluminescence. Using thin film Mg/Ag/p-Si(111) Schottky diodes with 1 nm Mg on a 10-60 nm thick Ag layer as 2π-photodetectors, the chemiluminescence is internally detected with a much larger efficiency than external methods. The chemically induced photoyield shows a maximum for a Ag film thickness of 45 nm. The enhancement is explained by surface plasmon coupled chemiluminescence, i.e., surface plasmon polaritons are effectively excited in the Ag layer by the oxidation reaction and decay radiatively leading to the observed photocurrent. Model calculations of the maximum absorption in attenuated total reflection geometry support the interpretation. The study demonstrates the extreme sensitivity and the practical usage of internal detection schemes for investigating surface chemiluminescence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detection of the adsorption of water monolayers through the ion oscillation frequency in the magnesium oxide lattice by means of low energy electron diffraction

We investigate the variation of the oscillation frequency of the Mg{sup 2+} and O{sup 2−} ions in the magnesium oxide lattice due to the interactions of the surface with water monolayers by means of Low Energy Electron Diffraction. Our key result is a new technique to determine the adsorbate vibrations produced by the water monolayers on the surface lattice as a consequence of their change in the surface Debye temperature and its chemical shift. The latter was systematically investigated for different annealing times and for a constant external thermal perturbation in the range of 110–300 K in order to accomplish adsorption or desorption of water monolayers in the surface lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Helium-like magnesium embedded in strongly coupled plasma

In recent days, with the advent of the x-ray free electron laser (FEL) with Linac coherent light source (LCLS) and the Orion laser, experimental studies on atomic systems within strongly coupled plasma environment with remarkable improvement in accuracy as compared to earlier experiments have become possible. In these kinds of experiments, hydrogen-like and helium-like spectral lines are used for determination of plasma parameters such as temperature, density. Accurate theoretical calculations are, therefore, necessary for such kind of studies within a dense plasma environment. In this work, ab initio calculations are carried out in the framework of the Rayleigh-Ritz variation principle to estimate the ground state energy of helium-like magnesium within strongly coupled plasma environment. Explicitly correlated wave functions in Hylleraas coordinates have been used to incorporate the effect of electron correlation. The ion-sphere model potential that confines the central positive ion in a finite domain filled with plasma electrons has been adopted to mimic the strongly coupled plasma environment. Thermodynamic pressure ’felt’ by the ion in the ground states due to the confinement inside the ion spheres is also estimated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Field induced polarization and magnetization behaviour of Gd-doped lead magnesium niobate ceramics

Both superparaelectric and superparamagnetic behaviour has been observed in rare earth magnetic ion Gd{sup 3+} doped Lead Magnesium Niobate (Gd-PMN). Field induced polarization and magnetization studies reveal hystresis loss free P-E and M-H loop at 300 K and 5 K, respectively. Temperature dependence of inverse susceptibility plot shows deviation at a temperature “t{sub d}” when fitted with the Curie-Weiss law. This deviation has been attributed to transition from paramagnetic to superparamagnetic behaviour as reported in amorphous Pd-Ni-Fe-P alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗