Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Low”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Overcoming low EIA performance - A diagnostic tool for the deliberate development of EIA system capacities in low and middle income countries

Highlights: • A tool for rapid assessment of EIA performance is presented. • The tool focusses on EIA systems in low and middle income countries. • This tool aims to enhance the capacities of the main EIA organizations. • Mechanisms are identified to maintain and further develop the enhanced capacities.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2012

Exergy analysis and operational efficiency of a horizontal ground-source heat pump system operated in a low-energy test house simulated occupancy conditions

This paper presents detailed analysis of a water to water ground source heat pump (WW-GSHP) to provide all the hot water needs in a 345 m 2 house located in DOE climate zone 4 (mixed-humid). The protocol for hot water use is based on the Building America Research Benchmark Definition (Hendron 2008; Hendron and Engebrecht 2010) which aims to capture the living habits of the average American household and its impact on energy consumption. The entire house was operated under simulated occupancy conditions. Detailed energy and exergy analysis provides a complete set of information on system efficiency and sources of irreversibility, the main cause of wasted energy. The WW-GSHP was sized at 5.275 kW (1.5-ton) for this house and supplied hot water to a 303 L (80 gal) water storage tank. The WW-GSHP shared the same ground loop with a 7.56 kW (2.1-ton) water to air ground source heat pump (WA-GSHP) which provided space conditioning needs to the entire house. Data, analyses, and measures of performance for the WW-GSHP in this paper complements the results of the WA-GSHP published in this journal (Ally, Munk et al. 2012). Understanding the performance of GSHPs is vital if the ground is to be used as a viable renewable energy resource.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Giant low-field magnetocaloric effect and refrigerant capacity in reduced dimensionality EuTiO 3 multiferroics

Engineering magnetic materials into a thin film form while preserving its excellent magnetocaloric response is essential in the development of miniature magnetic coolers. We demonstrate how this can be achieved in the case of EuTiO 3 - an emerging multiferroic material. Unlike conventional cases where reduced dimensionality considerably decreased the magnetic entropy change (ΔS M ) and hence the refrigerant capacity (RC), we show the large low-field enhancements of ΔS M and RC in a ~100 nm thick nanocrystalline EuTiO 3 film (ΔS M ~ 24 J kg -1 K -1 and RC = 152 J kg -1 for μ 0 ΔH = 2T) relative to its single crystal counterpart (ΔS M ~ 17 J kg -1 K -1 and RC ~ 107 J kg -1 for μ 0 ΔH = 2T). The nanocrystalline EuTiO 3 film is an excellent candidate for cryogenic magnetic refrigeration. From our study, a new approach for improving both MCE and RC in magnetic nanomaterials is proposed, which will stimulate further research on magnetocaloric thin films and related cooling devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Sulfate Sequestration by Ba-Sn Composite Material on Re Retention in Low-Activity Waste Glass

Difficulty incorporating radioactive Tc-99 into glass during vitrification of low-activity waste (LAW) at the Hanford Site is a technical challenge. Previous studies suggested that the presence of sulfate salts in the melt hinder the incorporation of Re, a non-radioactive surrogate for Tc-99, into nuclear waste glass. In this study, we assessed the capability of a Ba-Sn composite to sequester sulfate during vitrification of AN-102 LAW feed and the resulting effects on Re retention in the glass. We also investigated a feed where the initial soluble sulfate source in the simulated LAW (Na2SO4) was replaced with insoluble BaSO4. The Ba-Sn composite-treated feed and BaSO4-substitute feed were compared to a control, AN-102 baseline. The feeds were prepared and then heated to temperatures from 400-1000 °C at 5 °C/min and air-quenched to room temperature. The heated samples and dried feeds were leached in deionized water. The solutions from the leach test were analyzed by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) to determine the amount of soluble sulfate as a function of temperature and the resulting solids were analyzed for Re retention. Although the Ba-Sn composite material successfully sequestered sulfate in the as-prepared LAW feed, heating to 400 °C resulted in most of the sulfate partitioning to a soluble salt phase. By 700°C, sulfate partitioning in the composite-treated feed was identical to the baseline feed. Throughout the entire temperature range the BaSO4-substitute feed behaved similarly to the composite-treated feed. The results of the study show that sequestering sulfate into a BaSO4 phase is ineffective for rhenium retention as the sulfate salt behavior was identical in the three feeds at =700 °C. The fraction of rhenium retained in the glass at 1000°C varied from 39.4-46.6% for the three feeds, which is shown to be an insignificant difference.

George, Jaime L.↗
DOE OSTI2019

Effects of Sulfate on Rhenium Incorporation into Low-Activity Waste Glass

Technetium-99 (99Tc) is a major radionuclide of concern in the Hanford low-activity waste (LAW), which will be vitrified into borosilicate glass at the Waste Treatment and Immobilization Plant (WTP). Sulfate content in LAW has been known to be a critical factor affecting the volatile loss of 99Tc during melting of the LAW glass feed (a mix of liquid LAW and mineral/chemical additives). We investigated rhenium (a nonradioactive surrogate for 99Tc) incorporation into glass by performing crucible melting tests of two representative simulated LAW glass feeds, each prepared with varied sulfur levels. The sulfate content varied from the original content to half of the original (½S) and to zero (0S), in the range of 0 to 0.8 mass % SO3 in glass if 100% retained. The slurry feeds were dried at 105°C and heated to 400–1100°C. Deionized water leach at room temperature and at 80°C was conducted on the dried feed and heat-treated samples to analyze the chemical compositions of soluble and insoluble phases separately and to profile the partitioning of various components into different phases during the melting process. Different partitioning behavior of rhenium, sulfate, and chlorine is discussed in connection with major feed-to-glass conversion reactions. The mechanism on how sulfate affects rhenium incorporation during feed-to-glass conversion reactions, and so final retention of rhenium in glass, is proposed based on the two hypotheses that segregated sulfate-rich phase forms during feed conversion reactions and Re preferentially partitions to this sulfate-rich phase.

Jin, Tongan↗