SEARCH · Engineering Papers

Results for “LIQUID WASTES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS2003

Reactive Processing of Environmentally Conscious, Biomorphic Ceramics from Natural Wood Precursors

Environmentally conscious, biomorphic ceramics (Ecoceramics) are a new class of materials that are manufactured from renewable resources and wastes. In this study, silicon carbide and oxide-based biomorphic ceramics have been fabricated from pine and jelutong wood precursors. A carbonaceous preform is produced through wood pyrolysis and subsequent infiltration with oxides (ZrO2 sols) and liquid silicon to form ceramics. These biomorphic ceramics show a wide variety of microstructures, densities, and hardness behavior that are determined by the type of wood and infiltrants selected.

Singh, M.↗

DOE OSTI2026

Impact of Molten Gallium on the Microstructure and Corrosion Behavior of Aluminum and Uranium-Aluminum Alloys for Used Nuclear Fuel Reprocessing

Test reactors around the world utilize highly enriched uranium fuel to achieve high neutron fluxes for materials testing. Once spent, the remaining uranium is a valuable resource for subsequent fuel fabrication. However, some of these test reactor cores consist of curved plate-type fuel elements, fabricated using aluminum alloy 6061 (AA6061) cladding to encapsulate a uranium-aluminum alloy (UAlx) fuel matrix. These assemblies require non-standard reprocessing approaches for uranium recovery, as aluminum dissolves readily in acidic solutions, generating large volumes of waste and complicating downstream chemical separations. In this work, we investigate a novel chemical decladding strategy based on the interaction between AA6061/UAlx and molten gallium (Ga). Ga is known to induce severe degradation of aluminum metal through liquid metal embrittlement (LME), even at relatively low Ga concentrations. By penetrating the aluminum crystal lattice, Ga disrupts grain cohesion and facilitates fracture or dissolution of the aluminum matrix. Thermodynamic analysis of the Al–Ga binary phase diagram suggests that Ga may offer a viable pathway to selectively weaken or dissolve the AA6061 cladding, and potentially the aluminum component of the UAlx fuel matrix within. To this end, parametric experiments were performed at 50 °C and 100 °C across a range of Al–Ga atomic fractions. At lower Al fractions, the AA6061 was completely molten after 2 hours of exposure to the Ga metal. In contrast, samples with higher Al fractions (0.9 Al, 0.1 Ga) contained residual solids after 2 hours, which were characterized by microstructural examination using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). These Al-Ga compositions were also evaluated using FactSage thermodynamic modeling to further elucidate the relationship between phase diagram behavior and LME.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Upcycling plastic waste into polyhydroxyalkanoates with high carbon conversion via CO 2 plasma-enabled deconstruction

Plastic deconstruction into fermentable intermediates is a key step for microbial bio-upcycling into value-added products. In this study, CO 2 plasma deconstruction was used as an electrified route to convert polyethylene into oxygenated intermediates and liquid (OIL). The resulting OIL was rich in fatty acids, fatty alcohols, and hydrocarbons, making it a suitable feedstock for medium-chain-length polyhydroxyalkanoate (mcl-PHA) production by Pseudomonas putida NRRL B-14688 and Pseudomonas resinovorans NRRL B-2649. Compared with batch fermentation and monocultures, fed-batch co-cultivation markedly improved biomass formation and PHA accumulation, likely due to complementary substrate utilization, particularly hydrocarbon conversion by P. resinovorans. Using virgin polyethylene-derived OIL (Vir-OIL), the co-culture achieved 40.11% mcl-PHA content and about 18% PHA yield based on total OIL fed. More importantly, OIL produced from post-consumer single-use plastic films (PCR-OIL) was directly fermented and well supported the cell growth and PHA accumulation, achieving 38.11% PHA content and about 14.7% PHA yield. Based on emulsified OIL fractions, PHA yields for Vir-OIL and PCR-OIL were comparable (∼28%). PHA granules were extracted from PCR-OIL-grown cells with high recovery (88.25%) and purity (94.8%). Five monomers were identified in the polymer, including 3-hydroxyhexanoate (3HHx), 3-hydroxyoctanoate (3HO), 3-hydroxydecanoate (3HD), 3-hydroxydodecanoate (3HDD), and 3-hydroxytetradecanoate (3HTD), with 3HO (44.28%) and 3HD (40.60%) as the dominant units. The polymer exhibited moderate molecular weight and narrow dispersity (M n = 65.4 kDa, M w = 92.1 kDa, Đ = 1.40) and low crystallinity (T m ≈ 76.6 °C, X c ≈ 15.5%). These characteristics indicate elastomer-like behavior, making the material suitable for flexible applications such as films, coatings, adhesives, and blend modifiers. Overall, this study establishes a CO 2 plasma-assisted route for generating fermentable polyethylene-derived intermediates and demonstrates that fed-batch co-culture fermentation can effectively funnel plastic-derived carbon into mcl-PHA.

42 ENGINEERING↗

DOE OSTI2024

Aliphatic Amines from Waste Polyolefins by Tandem Pyrolysis, Hydroformylation, and Reductive Amination

Pyrolysis of waste plastics can produce a product mixture with a high concentration of olefins (>50 wt%). The olefins, as building blocks in the petroleum industry, are potential precursors for valuable commodity chemicals with higher values (>$2000 per ton). In this work, we produce aldehydes by hydroformylation of the olefins present in pyrolysis oil from colored post-consumer recycled high-density polyethylene (PCR-HDPE). The obtained aldehydes in the oil are then converted into aliphatic amines via reductive amination with a Ru/C catalyst. The aminated oil was characterized by multiple analytical chemistry techniques including elemental analysis, nuclear magnetic resonance spectroscopy, high-resolution liquid chromatography-mass spectrometry, and gas chromatography-mass spectrometry with a Polyarc flame ionization detector. The concentration of metals in the PCR-HDPE and oil changes during the tandem processes, showing limited effects of these elements (e.g., Al, Ca, Fe, Mg, Ti, Zn) on hydroformylation and reductive amination. Additionally, we demonstrated that reductive amination of aldehydes with varied carbon numbers and branching properties can be achieved in the presence of a complex mixture, including paraffins and aromatics. The results indicate that waste plastics have the potential to serve as a renewable source for mono and di aliphatic amines, thereby diminishing reliance on fossil feedstocks as the current primary amine source.

aliphatic amines↗

DOE OSTI2022

Research and development of hydrogen carrier based solutions for hydrogen compression and storage

Industrial and public interest in hydrogen technologies has risen strongly recently, as hydrogen is the ideal means for medium to long term energy storage, transport and usage in combination with renewable and green energy supply. In a future energy system, the production, storage and usage of green hydrogen is a key technology. Hydrogen is and will in future be even more used for industrial production processes as a reduction agent or for the production of synthetic hydrocarbons, especially in the chemical industry and in refineries. Under certain conditions material based systems for hydrogen storage and compression offer advantages over the classical systems based on gaseous or liquid hydrogen. This includes in particular lower maintenance costs, higher reliability and safety. Hydrogen storage is possible at pressures and temperatures much closer to ambient conditions. Hydrogen compression is possible without any moving parts and only by using waste heat. In this paper, we summarize the newest developments of hydrogen carriers for storage and compression and in addition, give an overview of the different research activities in this field.

08 HYDROGEN↗

NASA NTRS1990

Two-Phase Accumulator

Two-phase accumulator maintains pressure and temperature in thermal-bus system within predetermined range during variations in heat load on system. Stores liquid and vapor ammonia. Exchanges liquid ammonia with condenser to adjust level of liquid in condenser. Prototype has capacity of 13 gallons (49 liters). Simple and highly reliable. Responds quickly, restoring pressure and temperature to proper values within minutes. Low in cost and requires little further development. Used to dispose of waste heat, such as that from electronic equipment or power-plant.

Kalb, Charles E.↗

NASA NTRS2004

Water for Two Worlds: Designing Terrestrial Applications for Exploration-class Sanitation Systems

At the United Nations Millennium Summit in September of 2000, the world leaders agreed on an ambitious agenda for reducing poverty and improving lives: the Millennium Development Goals (MDGs), a list of issues they consider highly pernicious, threatening to human welfare and, thereby, to global security and prosperity. Among the eight goals are included fundamental human needs such as the eradication of extreme poverty and hunger, the promotion of gender equality, the reduction of child mortality and improvement of maternal health, and ensuring the sustainability of our shared environment. In order to help focus the efforts to meet these goals, the United Nations (UN) has established a set of eighteen concrete targets, each with an associated schedule. Among these is Target 10: "By 2015, reduce by half the proportion of people without access to safe drinking water." A closely related target of equal dignity was agreed at the World Summit on Sustainable Development (Johannesburg, September 2002): "By 2015, reduce by half the proportion of people without access to basic sanitation." One of the greatest successes in the development of Exploration-class technologies for closed-loop, sustainable support of long-duration human space missions has been the work both ESA and NASA have done in bioregenerative water reclamation (WRS), and secondarily, in solid-waste management. Solid-waste and WRS systems tend to be combined in the commercial world into the field of sanitation, although as we will see, the most essential principles of sustainable terrestrial sanitation actually insist upon the separation of solid and liquid excreta. Seeing the potential synergy between the space program ALS technologies developed for Mars and the urgent needs of hundreds of millions of people for secure access to clean water here on Earth, we set out to organize the adaptation of these technologies to help the United Nations Development Programme (UNDP) meet Target 10. In this paper, we will summarize the issues and results of the first "Water for Two Worlds" summit held in January of this year, describe,the status of the sustainable sanitation systems that are on the table for adaptation to widespread terrestrial use, and present fundamental strategies for forward work.

Adams, Constance↗

DOE OSTI2022

Analysis in Support of Disposition of Tank 48 Legacy Material

This report contains the characterization of six 200-mL Tank 48H samples: HTF-48-21-74, HTF-48-21-75, HTF-48-21-76, HTF-48-21-81, HTF-48-21-82, and HTF-48-21-83. The effort supports a Systems Engineering Evaluation (SEE) recommendation involving a Tank 48H decantation strategy that would remove liquid volume and grout the solids. The first three Tank 48H samples were surface samples taken after a quiescent period in the tank. The quiescent period allowed settling of the solids, these being mostly potassium tetraphenylborate. These three surface samples had no measurable solids, though a settling haze could be seen. The latter three samples were taken at 48, 25, and 10 inches from the bottom of Tank 48H immediately after tank mixing pumps had been run. Those samples contained measurable insoluble solids that were readily visible. All six samples were analyzed to provide chemical and radionuclide concentrations as defined as the "Limit" and "Target" in the Saltstone Production Facility (SPF) Waste Acceptance Criteria (WAC) and per the compliance strategy in the Tank Farm Waste Compliance Plan (WCP). Samples were analyzed by many methods to determine pH, density/specific gravity, radioactive isotopes, soluble and insoluble elements, total solids, total insoluble solids, organic and inorganic mercury, volatile and semi-volatile chemicals, and anions. Photographs of the settling of small samples were taken over time and are displayed in this report. The extent of settling was very significant, showing that surface sample liquids are similar to filtrates. However, Cs-137 measurements exceeded WAC limits in all surface samples (1.1E+07 vs. 1.3E+06). The solids were found to contain very high cesium activity, measured as high as 1.1E+10 dpm/gram. Sodium was in the range of 4.24 to 4.74 M for all samples, so the solids would tend to settle with time and would not be at risk of floating without air entrainment. No organic mercury was detected in this work.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2022

Analysis in Support of Disposition of Tank 48 Legacy Material

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2020

Large-scale production of 88 Y and 88 Zr/ 88 Y generators: A proof of concept study for a 70 MeV H – cyclotron

Here, the large-scale production of 88 Y with proton-induced reactions has been investigated from the perspective of new generation 70 MeV H – cyclotrons. Tandem target configurations are presented for both the direct production of 88 Y as well as for producing 88 Zr/ 88 Y generators. Based on the relevant excitation functions, physical yields have been derived for 88 Y production with Y 2 O 3 /SrCO 3 tandem targets and 88 Zr production with Zr/Y 2 O 3 tandem targets. Yields are presented for optimized targets (i.e. optimum yield) as well as for balanced thermal loads on the individual targets. Liquid 88 Zr/ 88 Y generators have been produced using both natural Zr and Nb target materials, the former for dedicated productions and the latter as a byproduct by processing spent irradiated Nb capsules which normally would constitute radioactive waste. These stock solutions, which contain both the target material and 88 Zr precursor, are retained virtually unchanged after processing except for the removal of 88 Y on AG MP-50 macroporous cation-exchange resin. Methods are presented for the preparation of Nb stock solutions in hydrofluoric acid and Zr stock solutions in sulfuric acid. It is shown that multi-Ci productions of 88 Y are feasible at a 70 MeV cyclotron facility, suitable for the needs of fracking applications. In addition, 88 Zr/ 88 Y generators can provide 88 Y with very high specific activity, suitable for labelling of biomolecules.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2020

LArSoft and Future Framework Directions at Fermilab

The diversity of the scientific goals across HEP experiments necessitates unique bodies of software tailored for achieving particular physics results. The challenge, however, is to identify the software that must be unique, and the code that is unnecessarily duplicated, which results in wasted eort and inhibits code maintainability. Fermilab has a history of supporting and developing software projects that are shared among HEP experiments. Fermilab’s scientific computing division currently expends eort in maintaining and developing the LArSoft toolkit, used by liquid argon TPC experiments, as well as the event-processing framework technologies used by LArSoft, CMS, DUNE, and the majority of Fermilab-hosted experiments. As computing needs for DUNE and the HL-LHC become clearer, the computing models are being rethought. Presented here are Fermilab’s plans for addressing the evolving software landscape as it relates to LArSoft and the data-processing frameworks, specifically as it relates to the DUNE experiment.

Knoepfel, Kyle↗

NASA NTRS1972

A 10,000-gpm liquid hydrogen transfer system for the Saturn/Apollo program.

Brief description of the design and operation of the liquid hydrogen transfer system used to service the Saturn V launch vehicle. The cryogenic loading of the huge booster begins eight hours before the scheduled liftoff. The first three hours of fueling are spent in cold hydrogen gas conditioning of the fuel tank. The cold hydrogen gas is provided by vaporizing liquid hydrogen from the storage tank and routing the resultant gas through the fill system. Boil-off losses after loading are continuously replaced through control valves which are driven by a computer system. The liquid hydrogen transfer system is made up of a number of subsystems including the 850,000 gal storage tank whose boil-off losses amount to only 200 gal/day, the pressurization system, the burn pond for controlled disposal of hydrogen waste gas, the storage tank fill manifold, and the hazardous gas monitoring system. Some of the subsystems and components are redundant to provide a high degree of reliability.

Wybranowski, E., Jr.↗

NASA NTRS2017

Design and Development of the Heat Redistribution System for the Mission to Europa Spacecraft:

This paper details the conceptual design of the Heat Redistribution System (HRS) used for thermal control of the Europa Clipper spacecraft. The solar powered spacecraft will launch in the early 2020s and will study Jupiter’s Icy moon, Europa, where previous investigations have indicated the possibility of a liquid water ocean underneath its ice-encrusted surface. The spacecraft will execute multiple flybys of Europa while relying on the HRS for thermal control of the spacecraft bus. The HRS utilizes a Mechanically Pumped Fluid Loop (MPFL) to reclaim waste heat from an avionics and payload electronics compartment and redistribute it to other parts of the spacecraft, such as the propulsion module structure and the louver-radiator assembly. A “replacement heater block” provides supplemental heat when needed to maintain the spacecraft hardware above its allowable flight temperatures. Additionally, a set of thermal control valves autonomously actuate to reduce the fluid flow through the radiator during cold environment cases. The HRS was used in previous flight projects at JPL such as Mars Science Laboratory, but the uniqueness of the Europa Clipper mission has mandated changes to previous HRS designs; the most significant design drivers and design changes for this iteration of the HRS are discussed.

Bertagne, Christopher↗

DOE OSTI2026

Ion-Specific Effects on PuO 2 Nanoparticle Aggregation and Dissolution in Concentrated Electrolytes

Hydrolytic PuO 2 nanoparticles (NPs) are a dominant aqueous Pu-bearing phase in high ionic strength nuclear wastes, yet their reactivity in nonideal brines remains poorly constrained. We quantify how electrolyte identity and concentration control PuO 2 NP aggregation and ligand-assisted dissolution in acidic, high salinity solutions (NaCl, NaNO 3 , NaClO 4 , Na 2 SO 4 , Na 2 C 2 O 4 up to 5 M). A multitechnique workflow combining liquid scintillation counting (operationally defined aqueous [Pu]), scattering/electrokinetic measurements (aggregate size and zeta potential), and spectroscopy (UV–vis, XPS, Raman) resolves electrolyte-dependent partitioning between colloidal and molecular Pu species. Weakly coordinating anions (ClO 4 – , Cl – , NO 3 – ) largely preserve the (aggregated) nanoparticulate fraction but generate distinct dissolved species at high concentration, i.e., Pu(IV)–nitrato complexes in NaNO 3 and Pu(VI)–chloro complexes in NaCl. In contrast, stronger ligands substantially perturb PuO 2 NP stability: sulfate promotes partial dissolution to Pu(IV)–sulfate complexes at low concentration but reduces aqueous [Pu] at higher sulfate levels via secondary Pu(IV) sulfate formation, whereas oxalate drives strong dissolution to aqueous Pu–oxalate complexes. Aged NPs show similar trends with reduced aqueous fractions and more dominant aggregation mechanisms. In conclusion, these spectroscopically constrained speciation data provide a foundation for incorporating PuO 2 NP reactivity into thermodynamic and reactive transport models for high salinity waste and brine environments.

Aggregation↗

DOE OSTI2025

A modeling framework for technical, economic, energetic, and environmental assessment of produced water pretreatment from oil and gas industry

Not Available

Lugo, Abdiel↗

NASA NTRS1982

Miniature J-T refrigators using adsorption compressors

More sophisticated cooling systems for the employed detectors will be needed to satisfy the demand for higher resolution and sensitivity of various detectors used in space missions. The design of the cooling system must take into consideration the unique environment of space vehicles. It is pointed out that a deep space vehicle usually has an ample supply of waste heat from a radioisotope thermoelectric generator (RTG) and has a heat sink near zero Kelvin. Passive radiative coolers have been used for cooling temperatures above 90 K. Cooling below 90 K is currently handled by phase changes of solid or liquid cryogens or mechanical refrigeration. However, the weight of the cryogen may be a problem in a long duration space mission. Refrigerators of small cooling capacity are required in many spacecraft applications. For some future NASA missions, a multistage Joule-Thomson refrigerator using adsorption compressors appears particularly attractive. A study is discussed of four different refrigeration stages which use charcoal as the adsorbent. The adsorbed gases are nitrogen, helium, hydrogen, and neon.

Chan, C. K.↗

DOE OSTI2024

Identification and time evolution of thionyl chloride (SOCl 2 ) radiolysis products

In this study, innovative solutions are needed to reduce the amount of high-level waste generated by used nuclear fuel recycling strategies to support the widespread adoption of sustainable nuclear fission energy technologies. To this end, a new sulfur chloride-based process has been developed to recycle zirconium alloy-based materials, which make up a significant fraction of high-level radioactive waste. To support the continued development of this process, we present new data on the potential reaction pathways over time of the products arising from the gamma and electron beam radiolysis of neat thionyl chloride (SOCl 2 ). Interrogation of the gamma irradiated liquid by Raman spectroscopy provided more conclusive identification of the SOCl 2 degradation products, specifically sulfur dichloride (SCl 2 ), molecular chlorine (Cl 2 ), sulfur dioxide (SO 2 ), and sulfuryl chloride (SO 2 Cl 2 ). In comparison, the high dose rate (~10 7 Gy s -1 ) electron beam irradiations formed significantly more degradation products. For both cobalt-60 gamma and electron beam irradiations, the observed degradation products were found to evolve as a function of time post-irradiation via the same reaction pathways, with indication of a solvent regeneration mechanism. These findings are fortuitous for process development, as such a mechanism would be beneficial for process longevity and cost effectiveness.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

NASA NTRS1986

Wet-oxidation waste management system for CELSS

A wet oxidation system will be useful in the Closed Ecological Life Support System (CELSS) as a facility to treat organic wastes and to redistribute inorganic compounds and elements. However at rather higher temperatures needed in this reaction, for instance, at 260 deg C, only 80% of organic in a raw material can be oxidized, and 20% of it will remain in the liquid mainly as acetic acid, which is virtually noncombustible. Furthermore, nitrogen is transformed to ammonium ions which normally cannot be absorbed by plants. To resolve these problems, it becomes necessary to use catalysts. Noble metals such as Ru, Rh and so on have proved to be partially effective as these catalysts. That is, oxidation does not occur completely, and the unexpected denitrification, instead of the expected nitrification, occurs. So, it is essential to develop the catalysts which are able to realize the complete oxidation and the nitrification.

Takahashi, Y.↗