SEARCH · Engineering Papers

Results for “LENGTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Investigation of the effect of inlet turbulence length scale on fan discrete tone noise

Results of an experimental investigation at the Ames 40- by 80-Foot Wind Tunnel of fan rotor alone discrete tone noise is presented. The investigation examines rotor interaction with fan inlet turbulence. The importance of turbulence length scale is shown by comparing the fan radiated acoustic spectrum with and without modified turbulence length scales. A small-scale low pressure ratio fan was used for the experiment.

Hodder, B. K.↗

NASA NTRS1973

Measurement of Debye length in laser-produced plasma.

The Debye length of an expanded plasma created by placing an evacuated chamber with an entrance slit in the path of a freely expanding laser produced plasma was measured, using the slab geometry. An independent measurement of electron density together with the observed value for the Debye length also provided a means for evaluating the plasma electron temperature. This temperature has applications in ascertaining plasma conductivity and magnetic field necessary for confinement of the laser produced plasma. Also, the temperature obtained would be useful in analyzing electron-ion recombination rates in the expanded plasma and the dynamics of the cooling process of the plasma expansion.

Ehler, W.↗

NASA NTRS1973

Path-length distributions of photons diffusely reflected from a semi-infinite atmosphere.

Knowledge of the probability distribution of photon path lengths for diffuse reflection in the continuum from a planetary atmosphere greatly simplifies computation of the shape and strength of absorption lines formed under conditions of multiple scattering. Graphs of this probability distribution are presented for diffuse reflection from a semiinfinite conservative atmosphere for both isotropic and forward-directed scattering, and for several angles of incidence and reflection. Graphs showing distributions for the case of absorption in the continuum are also discussed. The distributions are obtained from an analytic expression for the path-length distribution for nth-order scattering and a tabulation of nth-order intensities. It is found that te shape of the probability distribution depends markedly on the degree of forward scattering due to the phase function. The results are compared with those obtained by a Monte Carlo computation of the sort which might be used if tabulated nth-order intensities were not available.

Appleby, J. F.↗

NASA NTRS1974

Supersonic and hypersonic aerodynamic characteristics of two shuttle-orbiter configurations designed for reduced length

Performance, stability, and control tests at supersonic and hypersonic speeds have been performed on two versions of a shuttle orbiter configuration designed for reduced length. One of the test configurations had twin dorsal fins rolled out 15 deg the other a centerline single dorsal fin. Effects of elevon and body deg flap deflection, rudder flare, planform fillet, and aileron deflection were examined. The supersonic tests were over the Mach number range from 1.6 to 4.63 at a Reynolds number based on model length of 4,300,000. The hypersonic tests were conducted at a Mach number of 10.3 and Reynolds number of 670,000.

Stone, H. W.↗

NASA NTRS1974

Effect of treated length on performance of full scale turbofan inlet noise suppressors

Two inlet noise suppressors containing wall treatment plus three treated rings were tested on a fan in an outdoor noise facility. Sound power attenuations were measured for three treated lengths of each suppressor. The noise reduction from the segment of liner closest to the fan, which contained a segment of wall treatment downstream of the splitter rings, was greater than the reduction from either of the other segments. The decibel attenuations of the ringed liner segments were linear with liner length as predicted by theory. The acoustic attenuation of the wall treatment was considerably greater than expected for available theory. This inordinate effectiveness of the wall treatment strongly suggests the possibility of using no-ring inlet suppressors when the required noise reduction is moderate. The decibel attenuations were higher than predicted above 2000 hertz, and the two suppressors behaved similarly despite the prediction of different behavior.

Dittmar, J. H.↗

NASA NTRS1974

An experimental study of the effect of treated length on fan inlet noise suppressors

The effect of length of acoustic treatment was studied on a full scale fan using two different inlets. Analysis of the data revealed that measured suppression varied linearly with the length of the ringed liner segments as anticipated. Further analysis indicated that the wall only portion of the treatment was substantially more effective than anticipated, suggesting that, if only moderate suppression is needed, wall only treatment may suffice. The two inlets behaved similarly. Introduction of a hard exhaust splitter into the configuration resulted in a noise increase at certain frequencies.

Dittmar, J. H.↗

NASA NTRS1975

Diffusion length measurements using the scanning electron microscope

A measurement technique employing the scanning electron microscope is described in which values of the true bulk diffusion length are obtained. It is shown that surface recombination effects can be eliminated through the application of highly doped surface field layers. The influence of high injection level effects and low-high junction current generation on the resulting measurement was investigated. Close agreement is found between the diffusion lengths measured by this method and those obtained using a penetrating radiation technique.

Weizer, V. G.↗

NASA NTRS1975

An experimental study of the effect of treated length on fan inlet noise suppressors

An experimental study of the effect of length of acoustic treatment was performed on a full scale fan using two different inlets. Analysis of the data revealed that measured suppression varied linearly with the length of the ringed linear segments as anticipated. Further analysis indicated that the wall only portion of the treatment was substantially more effective than anticipated suggesting that, if only moderate suppression is needed, wall only treatment may suffice. Contrary to expectation the two inlets behaved similarly. Introduction of a hard exhaust splitter into the configuration resulted in a noise increase at certain frequencies.

Dittmar, J. H.↗

NASA NTRS1976

Effects of airplane characteristics and takeoff noise and field length constraints on engine cycle selection for a Mach 2.32 cruise application

Sideline noise and takeoff field length were varied for two types of Mach 2.32 cruise airplane to determine their effect on engine cycle selection. One of these airplanes was the NASA/Langley-LTV arrow wing while the other was a Boeing modified delta-plus-tail derived from the earlier 2707-300 concept. Advanced variable cycle engines were considered. A more conventional advanced low bypass turbofan engine was used as a baseline for comparison. Appropriate exhaust nozzle modifications were assumed, where needed, to allow all engines to receive either an inherent co-annular or annular jet noise suppression benefit. All the VCE's out-performed the baseline engine by substantial margins in a design range comparison, regardless of airplane choice or takeoff restrictions. The choice among the three VCE's considered, however, depends on the field length, noise level, and airplane selected.

Whitlow, J. B., Jr.↗

NASA NTRS1975

A linear solution of lift interference in square tunnels with slotted test sections of finite length

A numerical program has been developed to determine the effects on lift interference of the finite length of the slotted portion of a square tunnel. Also analyzed by the program are the effects produced by small variations of static pressure between upper and lower plenum, and by boundary layer development on upper and lower walls downstream of the slotted section. In the flow model, based on compressible linear theory, the wing is represented by a single vortex and the wall induced perturbations are obtained by superimposing the effects of a series of images of the central vortex and of a distribution of sources and sinks on panels along the tunnel walls. The present results can be indicative of the magnitude and of the trends of the interference patterns associated with slotted test sections of finite length at high subsonic Mach numbers.

Ruger, C.↗

NASA NTRS1976

Cesium oscillator strengths measured with a multiple-path-length absorption cell

Absorption-oscillator-strength measurements for the principal series in cesium were measured using a multiple-path-length cell. The optical arrangement included a movable transverse path for checking the uniformity of the alkali density along the length of the cell and which also allowed strength measurements to be made simultaneously on both strong and weak lines. The strengths measured on the first 10 doublets indicate an increasing trend in the doublet ratio. The individual line strengths are in close agreement with the high resolution measurements of Pichler (1974) and with the calculations of Norcross (1973).

Exton, R. J.↗

NASA NTRS1978

Diffusion lengths in amphoteric GaAs heteroface solar cells

Minority-carrier diffusion lengths in amphoteric GaAs:Si were investigated. Electron and hole diffusion lengths in p- and n-type, respectively, were determined to be 13 microns and 7 microns. Preliminary efficiency measurements on heteroface structures based on amphoteric GaAs:Si p-n junctions indicated that these devices should make excellent solar cells.

Ashley, K. L.↗

NASA NTRS1978

Interpretation of scanning electron microscope measurements of minority carrier diffusion lengths in semiconductors

In scanning electron microscope (SEM) injection measurements of minority carrier diffusion lengths some uncertainties of interpretation exist when the response current is nonlinear with distance. This is significant in epitaxial layers where the layer thickness is not large in relation to the diffusion length, and where there are large surface recombination velocities on the incident and contact surfaces. An image method of analysis is presented for such specimens. A method of using the results to correct the observed response in a simple convenient way is presented. The technique is illustrated with reference to measurements in epitaxial layers of GaAs. Average beam penetration depth may also be estimated from the curve shape.

Flat, A.↗

NASA NTRS1978

Parametric modeling of low-frequency water-vapor-induced tropospheric path length fluctuations

Detailed wet tropospheric fluctuation information is presented in support of proposals to search for gravitational waves in ultra-precise Doppler data. The similarities between the solar wind and tropospheric effects on apparent signal path length are used to hypothesize a parametric model for low-frequency wet tropospheric path length fluctuation. Experimental observations of wet tropospheric signal delay fluctuations are interpreted as confirmation of this parametric form. The model is used to suggest the appropriate conditions for collection of experimental tropospheric fluctuation data.

Berman, A. L.↗

NASA NTRS1978

Method and apparatus for measuring minority carrier lifetimes and bulk diffusion length in P-N junction solar cells

Carrier lifetimes and bulk diffusion length are qualitatively measured as a means for qualification of a P-N junction photovoltaic solar cell. High frequency (blue) monochromatic light pulses and low-frequency (red) monochromatic light pulses were alternately applied to the cell while it was irradiated by light from a solar simulator, and synchronously displaying the derivative of the output voltage of the cell on an oscilloscope. The output voltage is a measure of the lifetimes of the minority carriers (holes) in the diffused N layer and majority carriers (electrons) in the bulk P material, and of the diffusion length of the bulk silicon. By connecting a reference cell in this manner with a test cell to be tested in reverse parallel, the display of a test cell that matches the reference cell will be a substantially zero output.

Vonroos, O. H.↗

NASA NTRS1978

Effect of grain boundaries in silicon on minority-carrier diffusion length and solar-cell efficiency

The spatial variation of minority-carrier diffusion length in the vicinity of a grain boundary for a polycrystalline silicon sheet has been measured by the use of the EBIC technique. The effect of such a variation on solar-cell output has then been computed as a function of grain size. Calculations show that the cell output drops considerably for grain size smaller than three times the bulk diffusion length.

Daud, T.↗

NASA NTRS1979

Optimum frequencies of passive microwave radiometer for tropospheric path-length correction

Radio-astronomical observations require accurate calibration of tropospheric path length. Such calibration can be achieved by microwave radiometers operating near the 22-GHz water vapor line. However, the performances of current passive microwave radiometers are meteorology-profile dependent. This is due mainly to incorrect frequency combinations and to saturation of brightness temperatures. By properly selecting an optimum frequency pair and removing the saturation effect, the dependency is alleviated and can be further adjusted by surface measurements alone. Hence, a universal calibration equation is applicable to all environmental conditions. Optimum frequency pairs are systematically searched. Simulation analysis indicates that calibration for the tropospheric water-vapor path-length error is better than 0.3 cm at zenith and better than 2 cm for an elevation angle as low as 10 deg.

Wu, S.-C.↗

NASA NTRS1978

Characterization of nonideal silicon in terms of lifetime and diffusion length

Experimental methods have been evaluated for the determination of lifetime and diffusion length in silicon intentionally doped with potentially lifetime-degrading impurities which may be present in low-cost silicon intended for use in terrestrial flat-plate arrays. Results obtained with these methods have been compared for mutual consistency. The effects of a number of impurities on bulk lifetime were determined from steady-state photoconductivity, and solar cells fabricated from this material were characterized in terms of diffusion length using a penetrating light technique. Comparison was made with results obtained by others using photoconductivity decay. General agreement was found in terms of the hierachy of impurities to which the lifetime is sensitive. The utility of the steady-state photoconductivity method is established even in the presence of considerable trapping.

Othmer, S.↗