Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Multi-Fluid and Kinetic Models of Partially Ionized Magnetic Reconnection

Magnetic reconnection in partially ionized plasmas is a ubiquitous and important phenomena in both laboratory and astrophysical systems. Here, simulations of partially ionized magnetic reconnection with well-matched initial conditions are performed using both multi-fluid and fully-kinetic approaches. Despite similar initial conditions, the time-dependent evolution differs between the two models. In multi-fluid models, the reconnection rate locally obeys either a decoupled Sweet-Parker scaling, where neutrals are unimportant, or a fully coupled Sweet-Parker scaling, where neutrals and ions are strongly coupled, depending on the resistivity. In contrast, kinetic models show a faster reconnection rate that is proportional to the fully-coupled, bulk Alfv\'en speed, $v_A^\star$. These differences are interpreted as the result of operating in different collisional regimes. Multi-fluid simulations are found to maintain $\nu_{ni}L/v_A^\star \gtrsim 1$, where $\nu_{ni}$ is the neutral-ion collision frequency and $L$ is the time-dependent current sheet half-length. This strongly couples neutrals to the reconnection outflow, while kinetic simulations evolve to allow $\nu_{ni}L/v_A^\star < 1$, decoupling neutrals from the reconnection outflow. Differences in the way reconnection is triggered may explain these discrepancies.

Magnetic reconnection↗

Data for Selective Oxidation of 3-Hydroxypropionic Acid to Malonic Acid over Pd/C: Mechanistic and Kinetic Study

Malonic acid (MA) is a high-value dicarboxylic acid with strong industrial demand, yet its current production heavily relies on petrochemical feedstocks. Here, we report the first systematic study for the sustainable production of MA via oxidation of 3-hydroxypropionic acid (3-HP) with a Pd/Carbon catalyst. The effects of oxidant type (O2 and H2O2), pH, and temperature on the reaction chemistry were comprehensively evaluated. Guided by experimental observation and DFT-calculated thermochemical energetics, reaction networks for 3-HP oxidation with both oxidants are proposed and validated through kinetic modeling. MA was identified as the primary oxidation product, while further oxidation yields acetic acid and oxalic acid. The kinetic model validated the network, displaying excellent agreement (R2 > 0.95). Kinetic observations also enabled a direct comparison between O2 and H2O2 and revealed their distinct behaviors. The model was further developed into a temperature-time map, providing insight into conditions that maximize MA production. Malonic acid selectivity of 56.9 % and yield of 50.5 % were achieved at 3 bar oxygen, equimolar NaOH:3-HP ratio, and 50 °C.

Bioproducts↗

Modeling suggests that virion production cycles within individual cells is key to understanding acute hepatitis B virus infection kinetics

Hepatitis B virus (HBV) infection kinetics in immunodeficient mice reconstituted with humanized livers from inoculation to steady state is highly dynamic despite the absence of an adaptive immune response. To recapitulate the multiphasic viral kinetic patterns, we developed an agent-based model that includes intracellular virion production cycles reflecting the cyclic nature of each individual virus lifecycle. The model fits the data well predicting an increase in production cycles initially starting with a long production cycle of 1 virion per 20 hours that gradually reaches 1 virion per hour after approximately 3–4 days before virion production increases dramatically to reach to a steady state rate of 4 virions per hour per cell. Together, modeling suggests that it is the cyclic nature of the virus lifecycle combined with an initial slow but increasing rate of HBV production from each cell that plays a role in generating the observed multiphasic HBV kinetic patterns in humanized mice.

59 BASIC BIOLOGICAL SCIENCES↗

A standardized workflow for kinetic metabolic model curation and dissemination

Kinetic metabolic models provide invaluable insights into cellular metabolism, supporting applications in synthetic biology, metabolic engineering, and systems biology. However, reproducibility and utility of these models hinge on clear and rigorous documentation, standardized annotation, and accessible visualization. This paper presents a workflow for building, annotating, visualizing, and sharing kinetic metabolic models. Our method integrates community standards and open-source tools to ensure reproducibility, interoperability, and user accessibility. This procedure enables researchers to produce reusable and well-documented kinetic models, advancing their role as powerful tools in metabolic research.

Cook, Margaret [Univ. of Washington, Seattle, WA (↗

TChem v2.0 - A Software Toolkit for the Analysis of Complex Kinetic Models

TChem is an open source software library for solving complex computational chemistry problems and analyzing detailed chemical kinetic models. The software provides support for: complex kinetic models for gas-phase and surface chemistry; thermodynamic properties based on NASA polynomials; species production/consumption rates; stable time integrator for solving stiff time ordinary differential equations; and, reactor models such as homogenous gas-phase ignition (with analytical Jacobian matrices), continuously stirred tank reactor, plug-flow reactor. This toolkit builds upon earlier versions that were written in C and featured tools for gas-phase chemistry only. The current version of the software was completely refactored in C++, uses an object-oriented programming model, and adopts Kokkos as its portability layer to make it ready for the next generation computing architectures i.e., multi/many core computing platforms with GPU accelerators. We have expanded the range of kinetic models to include surface chemistry and have added examples pertaining to Continuously Stirred Tank Reactors (CSTR) and Plug Flow Reactor (PFR) models to complement the homogenous ignition examples present in the earlier versions. To exploit the massive parallelism available from modern computing platforms, the current software interface is designed to evaluate samples in parallel, which enables large scale parametric studies, e.g. for sensitivity analysis and model calibration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient approach to kinetic simulation in the inner magnetically insulated transmission line on Z

This project explores the idea of performing kinetic numerical simulations in the Z inner magnetically insulated transmission line (inner MITL) by reduced physics models such as a guiding center drift kinetic approximation for particles and electrostatic and magnetostatic approximation for the fields. The basic problem explored herein is the generation, formation, and evolution of vortices by electron space charge limited (SCL) emission. The results indicate that for relevant to Z values of peak current and pulse length, these approximations are excellent, while also providing tens to hundreds of times reduction in the computational load. The benefits could be enormous: Implementation of these reduced physics models in present particle-in-cell (PIC) codes could enable them to be routinely used for experimental design while still capturing essential non-thermal (kinetic) physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrochemical Kinetics of Stable Isotopes (Final Report)

Stable isotopes are sensitive indicators to the mass transport and chemical reactions that occur during potentiostat-controlled electroplating of metals from aqueous (and some non-aqueous) metal-salt solutions. The goal of this research program is to measure the stable isotope fractionation during electrochemical processes, how the isotope-dependent rates are sensitive to chemistry, temperature, and electrochemical kinetics, and to use these measurements to develop a theoretical framework for a kinetic isotope effect that is able to predict kinetic isotope fractionation factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The application of parallel kinetic simulations to laser and electron transport through plasmas (Final technical report)

This is a final report for the grant entitled, “The application of parallel kinetic simulations to laser and electron transport through plasmas”. The objectives of this grant were to significantly advance the fundamental understanding of the nonlinear optics of plasmas and electron transport in high-energy-density laboratory plasmas (HEDLP), including conditions of relevance to Inertial Fusion Energy (IFE). The ultimate goal was to use the understanding to determine how to fully control laser plasma interactions. The primary research tools were our own kinetic particle-in-cell software, OSIRIS, that includes kinetic physics and can run effectively on leadership class computing facilities. Therefore, one objective was to ensure that OSIRIS in continually improved so that it was more accurate and could effectively utilize state-of-the-art computing facilities. Another objective was to attract and train young researchers into the field of high energy density plasma physics. To meet the research objectives, the funds from this proposal were used to conduct research on stimulated Raman scattering (SRS) and enhance our PIC software OSIRIS. It was found that small normalized magnetic fields can in some cases mitigate SRS and that speckles can mutually interact through SRS. It was also found that it is possible for instabilities drive near quarter critical (e.g., the high frequency hybrid instability-HFHI) can generate light waves that propagate back down a density gradient where they can rescatter into the HFHI at 1/16 of the original quarter critical density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Capturing O2 Desorption Through Isoconversional Kinetics for CFD Application

The present work examines desorption mechanisms and kinetics of the calcium-doped strontium perovskite at 25% calcium content (i.e., Sr_0.75 Ca_0.25 FeO_(3-δ)). Laboratory-scale, low inventory, fixed bed redox cycle experiments were developed and conducted in both dry and steam-based environments for three isothermal temperatures, 450, 500 and 550C. The temporal evolution of the conversion extent of the material sample over the redox cycles were obtained through the analysis of the gaseous products of the redox reactions. Using subsequently isoconversional differential methods, it was found that the activation energy exhibits a strong dependence on the extent of conversion during the desorption of this perovskite. In addition, the reconstruction of the reaction model showed that the desorption kinetics are controlled by a three-step mechanism. A successful a priori verification of the isoconversional desorption kinetics against the dry and steam-based environment desorption experimental data are shown.

Konan, Ndri A.↗

On Stochastic Heating and Its Phase-space Signatures in Low-beta Kinetic Turbulence

We revisit the theory of stochastic heating of ions and investigate its phase-space signatures in kinetic turbulence of relevance to low- β portions of the solar wind. In particular, we retain a full scale-dependent approach in our treatment, and we explicitly consider the case in which electric-field fluctuations can be described by a generalized Ohm's law that includes Hall and thermoelectric effects. These two electric-field terms provide the dominant contributions to stochastic ion heating when the ion-Larmor scale is much smaller than the ion skin depth, ρ i << d i , which is the case at β << 1. Employing well-known spectral scaling laws for Alfvén-wave and kinetic-Alfvén-wave turbulent fluctuations, we obtain scaling relations characterizing the field-perpendicular particle-energization rate and energy diffusion coefficient associated with stochastic heating in these two regimes. Phase-space signatures of ion heating are then investigated using three-dimensional hybrid-kinetic simulations of continuously driven Alfvénic turbulence at low β (namely, β i = β e = 0.3 and β i = β e = 1/9). In these simulations, energization of ions parallel to the magnetic field is subdominant compared to its perpendicular counterpart ( Q ∥,i << Q ⊥,i ), and the fraction of turbulent energy that goes into ion heating is ≈75% at β i = 0.3 and ≈40% at β i ≃ 0.1. The phase-space signatures of ion energization are consistent with Landau-resonant collisionless damping and a ( β -dependent) combination of ion-cyclotron and stochastic heating. We demonstrate good agreement between our scale-dependent theory and various signatures associated with the stochastic portion of the heating. We discuss briefly the effect of intermittency on stochastic heating and the implications of our work for the interpretation of stochastic heating in solar-wind spacecraft data.

79 ASTRONOMY AND ASTROPHYSICS↗

Fully Kinetic Shearing-box Simulations of Magnetorotational Turbulence in 2D and 3D. I. Pair Plasmas

The magnetorotational instability (MRI) is a fundamental mechanism determining the macroscopic dynamics of astrophysical accretion disks. In collisionless accretion flows around supermassive black holes, MRI-driven plasma turbulence cascading to microscopic (i.e., kinetic) scales can result in enhanced angular-momentum transport and redistribution, nonthermal particle acceleration, and a two-temperature state where electrons and ions are heated unequally. However, this microscopic physics cannot be captured with standard magnetohydrodynamic (MHD) approaches typically employed to study the MRI. In this work, we explore the nonlinear development of MRI turbulence in a pair plasma, employing fully kinetic particle-in-cell (PIC) simulations in two and three dimensions. First, we thoroughly study the axisymmetric MRI with 2D simulations, explaining how and why the 2D geometry produces results that differ substantially from 3D MHD expectations. We then perform the largest (to date) 3D simulations, for which we employ a novel shearing-box approach, demonstrating that 3D PIC models can reproduce the mesoscale (i.e., MHD) MRI dynamics in sufficiently large runs. With our fully kinetic simulations, we are able to describe the nonthermal particle acceleration and angular-momentum transport driven by the collisionless MRI. Since these microscopic processes ultimately lead to the emission of potentially measurable radiation in accreting plasmas, our work is of prime importance to understand current and future observations from first principles, beyond the limitations imposed by fluid (MHD) models. While in this first study we focus on pair plasmas for simplicity, our results represent an essential step toward designing more realistic electron–ion simulations, on which we will focus in future work.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron-scale Magnetic Holes Generation Driven by Whistler-to-Bernstein Mode Conversion in Fully Kinetic Plasma Turbulence

Magnetic holes (MHs) are coherent structures characterized by a strong and localized magnetic field amplitude dip, commonly observed in the heliosphere. These structures come in different sizes, from magnetohydrodynamic to kinetic scales. Subion-scale MHs are usually sustained by an electron current vortex and exhibit a strong electron temperature anisotropy, with higher temperatures perpendicular to the background magnetic field. Magnetospheric multiscale observations (MMSs) have revealed electron-scale MHs to be ubiquitous in the turbulent Earth’s magnetosheath and the solar wind, potentially playing an important role in the energy cascade and dissipation. Despite abundant observations, the origin of electron-scale MHs is still unclear and debated. In this work, we use fully kinetic simulations to investigate the role of plasma turbulence in generating electron-scale MHs. We find that the turbulence spontaneously produces electron-scale MHs via the following mechanism: first, large-scale turbulent velocity shears produce regions with high electron temperature anisotropy; these localized regions become unstable, generating oblique electron-scale whistler waves; as they propagate over the inhomogeneous turbulent background, whistler fluctuations develop an electrostatic component, turning into Bernstein-like modes; the strong electrostatic fluctuations produce current filaments that merge into an electron-scale current vortex; the resulting electron vortex locally reduces the magnetic field amplitude, finally evolving into an electron-scale MH. We show that MHs generated by this mechanism have properties consistent with MMSs and nontrivial kinetic features with a “mushroom”-shaped electron velocity distribution function. Our results have potential implications for understanding the formation and occurrence of electron-scale MHs in astrophysical turbulent and space environments, such as the Earth’s magnetosheath and the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

A chemical kinetics theory for interpreting the non-monotonic temperature dependence of enzymatic reactions

Abstract. One notable observation of enzymatic chemical reactions is that, for a given abundance of enzymes and substrates, temperature increases cause reaction rates to first increase consistent with the Arrhenius relationship, then plateau, and finally fall off quickly to zero at high temperatures. While many mathematical functions have been used to describe this pattern, we here propose a chemical kinetics theory which successfully replicates this observation and provides insights into the processes responsible for these dynamics. The chemical kinetics theory combines the law of mass action, von Smoluchowski's diffusion-limited chemical reaction theory, and Eyring's transition state theory. This new theory reveals that the thermally reversible enzyme denaturation ensured by the ceaseless thermal motion of molecules and ions in an enzyme solution explains the plateau and subsequent decrease in chemical reaction rates with increasing temperature. The temperature-dependent affinity parameter (K) that relates enzymes and substrates through their binding also affects the shape of the emergent temperature response. We demonstrate that with an increase in substrate availability, K shifts the optimal temperature, where reaction rates plateau, towards higher values. Further, we show that the chemical kinetics theory accurately represents 12 sets of published enzyme assay data and includes the popular mechanistic model by Ratkowsky et al. (2005) as a special case. Given its good performance and solid theoretical underpinning, we believe this new theory will facilitate the construction of more mechanistic-based environmental biogeochemical models.

Tang, Jinyun↗

Fundamental electrode kinetics

Report presents the fundamentals of electrode kinetics and the methods used in evaluating the characteristic parameters of rapid-charge transfer processes at electrode-electrolyte interfaces. The concept of electrode kinetics is outlined, followed by the principles underlying the experimental techniques for the investigation of electrode kinetics.

Elder, J. P.↗

Kinetic energy and quasi-biennial oscillation.

The modulation of the vertical flux of kinetic energy to the stratosphere by the pressure-work effect at 100 mb is compared with variations in the hemispheric kinetic energy, the horizontal momentum and heat transports at 'low' latitudes, and the tropical zonal wind and temperature for the lower stratosphere. It is deduced that the variation of the vertical flux of geopotential is in phase with the kinetic energy in the lower stratosphere and is statistically related to the time rate of change of the horizontal transports of heat and momentum at 30 N. The association of these results to the general circulation of the lower stratosphere is considered.

Miller, A. J.↗

Purfication kinetics of beryllium during vacuum induction melting

The kinetics of evaporation in binary alloys were quantitatively treated. The formalism so developed works well for several systems studied. The kinetics of purification of beryllium was studied through evaporation data actually acquired during vacuum induction melting. Normal evaporation equations are shown to be generally valid and useful for understanding the kinetics of beryllium purification. The normal evaporation analysis has been extended to cover cases of limited liquid diffusion. It was shown that under steady-state evaporation, the solute concentration near the surface may be up to six orders of magnitude different from the bulk concentration. Corrections for limited liquid diffusion are definitely needed for the highly evaporative solute elements, such as Zn, Mg, and Na, for which the computed evaporation times are improved by five orders of magnitude. The commonly observed logarithmic relation between evaporation time and final concentration further supports the validity of the normal evaporation equations.

Mukherjee, J. L.↗

Prediction of free turbulent mixing using a turbulent kinetic energy method

Free turbulent mixing of two-dimensional and axisymmetric one- and two-stream flows is analyzed by a relatively simple turbulent kinetic energy method. This method incorporates a linear relationship between the turbulent shear and the turbulent kinetic energy and an algebraic relationship for the length scale appearing in the turbulent kinetic energy equation. Good results are obtained for a wide variety of flows. The technique is shown to be especially applicable to flows with heat and mass transfer, for which nonunity Prandtl and Schmidt numbers may be assumed.

Harsha, P. T.↗

Trapping of hydrogen atoms in X-irradiated salts at room temperature and the decay kinetics

The salts (hypophosphites, formates, a phosphite, a phosphate, and an oxalate) were X-irradiated, whereby hydrogen formed chemically by a radiolytic process becomes trapped in the solid. By room temperature vacuum extraction, the kinetics for the evolution of this trapped hydrogen was studied mass spectrometrically. All salts except two exhibited second-order kinetics. The two exceptions (NaH2PO2(H2O) and K2HPO4) showed first-order kinetics. Based on experimental results, the escape of hydrogen involves three steps: the diffusion of hydrogen atoms from the bulk to the surface, association of these atoms on the surface (rate controlling step for second-order hydrogen evolution), and the desorption of molecular hydrogen from the surface. The hydrogen does not escape if the irradiated salt is stored in air, apparently because adsorbed air molecules occupy surface sites required in the escape mechanism.

May, C. E.↗