Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Irregular applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Probing the Mechanical Performance of Micro-architected Porous Structures Through In Situ Characterization and Analysis

Micropores play critical roles in both natural and man-made materials. Such pores take on a variety of shapes and sizes ranging from spherical to irregular sphere-like voids with diameters spanning from the nanometer to millimeter scales. When porous structures are mechanically loaded, the pores direct the stress around their free surfaces, altering the material’s mechanical response relative to fully dense materials. In this study, for the first time, we create micro-architected porous samples using nanolithography and investigate the role of pore morphology by conducting a series of in situ micropillar compression tests in scanning electron microscopy. The findings demonstrate that porosity is the primary factor influencing the mechanical response of these micro-architected materials, as often seen on a macroscopic level. Additionally, we observed that pore geometry had a significant impact on Young’s modulus, yield stress, and strain energy density as a secondary parameter. Then, the extracted Young’s modulus was compared to macroscopic empirical models and determined the analytical models sufficiently described the impact of porosity in the microscopic scale but failed to capture the impact of second-order parameters. Furthermore, these results suggest how porous materials can be tailored to achieve desired mechanical properties based on the engineering applications of interest.

36 MATERIALS SCIENCE↗

Propagation of wide bandwidth signals through strongly turbulent ionized media

Analytic and numerical techniques are presented which directly address the problem of propagation of wide bandwidth signals through random ionized media. This work is applicable to the problems of satellite communication and space based radar observation through a disturbed ionospheric propagation channel that would result from a high altitude chemical release or nuclear detonation. An analytic solution is presented for the two-position, two-frequency mutual coherence function for spherical wave propagation in the strong scattering limit. This solution is used to derive simple expressions for the power impulse response function and to determine its relationship to the important parameters of decorrelation distance and coherence bandwidth which describe the disturbed propagation channel. Results for mean time delay and time delay jitter are presented and compared to direct simulation results and to other theoretical calculations. A numerical/analytical solution to the parabolic wave equation is presented in the form of a multiple phase-screen (MPS) propagation simulation. In this very general solution technique, the random medium is divided into a finite number of layers. The field fluctuation through each layer is obtained by replacing the layer by a centrally located thin phase-screen, whose statistical properties are determined from the statistics of the electron-density irregularities. The waveform then propagates from phase-screen to phase-screen via an exact solution to the Fresnel-Kirchnoff equation. For wide bandwidth waveforms, numerical solutions are obtained at a number of discrete frequencies centered about the carrier and then time-domain solutions are obtained by Fourier transform techniques. Detailed results are presented for a number of interesting cases including propagation of a 20 MHz bandwidth signal through a finite barium cloud at a carrier frequency of 100 MHz. One of the major uses of the MPS propagation simulation has been to provide realizations of the received signal after propagation through a disturbed channel. The MPS simulation obtains a general solution of the parabolic wave equation under both weak and strong scattering conditions. A second technique to directly obtain realizations of wide bandwidth waveforms is presented here. This technique is limited to the case of strong scattering but requires only a fraction of the computer resources needed for MPS signal generation. Detailed comparisons of the two signal generation techniques are presented.

Random Media↗

Nonlinear Resonance Response of Porous Beam-Type Implants Corresponding to Various Morphology Shapes for Bone Tissue Engineering Applications

Having excellent biocompatibility and apatite mineralization as well as efficient mechanical properties makes bredigite as one of the most attractive bioceramics. A beam-type porous biological implant in a 3D-printed architecture is designed with micron pore size. The surface properties, morphology, and size of the composed powders are evaluated using Scherrer and Williamson-Hall equation. The effect of MNPs deposition into the bredigite bioceramics and correlation with temperature effect on roughness of the prepared bio-nanocomposite are also investigated for hyperthermia application potential. The composed powders are characterized by x-ray diffraction, and then scanning electron microscopy (SEM), differential scanning calorimetry, thermogravimetric analysis (weight change, TGA), and atomic force microscopy are utilized to evaluate the surface topography. The resonance response is the tendency of a bone scaffold to respond at prominent amplitude while the frequency of its oscillations is equal to the structure’s natural frequency of vibration. Therefore, based on the obtained mechanical properties via the experimental approach for the bio-nanocomposite material, an analytical solution based upon the multiple-timescale method is carried out to analyze the nonlinear primary resonance of a 3D-printed porous beam-type biological implant under uniform-distributed load. According to SEM observations, there are hard agglomerates in the bredigite-magnetite nanoparticles (Br-MNPs) bio-nanocomposite material with low weight fraction of MNPs. However, they are broken down by increasing the amount of MNPs. Also, it is displayed that for lower MNPs weight fraction, the height of jump phenomenon related to the nonlinear resonance response is maximum and minimum for, respectively, irregular and mesoporous shapes of morphology, but their associated forcing amplitudes related to the bifurcation points are minimum and maximum, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Geology and landscape evolution of the Hellas region of Mars

Hellas basin on Mars has been the site of volcanism, tectonism, and modification by fluvial, mass-wasting, and eolian processes over its more than 4-b.y. existence. Our detailed geologic mapping and related studies have resulted in the following new interpretations. The asymmetric distribution of highland massifs and other structures that define the uplifted basin rim suggest a formation of the basin by the impact of a low-angle bolide having a trajectory heading S60E. During the Late Noachian, the basin was infilled, perhaps by lava flows, that were sufficiently thick (greater than 1 km) to produce wrinkle ridges on the fill material and extensional faulting along the west rim of the basin. At about the same time, deposits buried northern Malea Planum, which are interpreted to be pyroclastic flows from Amphitrites and Peneus Paterae on the basis of their degraded morphology, topology, and the application of a previous model for pyroclastic volcanism on Mars. Peneus forms a distinctive caldera structure that indicates eruption of massive volumes of magma, whereas Amphitrites is a less distinct circular feature surrounded by a broad, low, dissected shield that suggests generally smaller volume eruptions. During the Early Hesperian, an approximately 1-to 2km-thick sequence of primarily fined-grained, eolian material was deposited on the floor of Hellas basin. Subsequently, the deposit was deeply eroded, except where armored by crater ejecta, and it retreated as much as 200-300 km along its western margin, leaving behind pedestal craters and knobby outliers of the deposit. Local debris flows within the deposit attest to concentrations of groundwater, perhaps in part brought in by outflow floods along the east rim of the basin. These floods may have deposited approximately 100-200m of sediment, subduing wrinkle ridges in the eastern part of the basin floor. During the Late Hesperian and Amazonian, eolian mantles were emplaced on the basin rim and floor and surrounding highlands. Their subsequent erosion resulted in pitted and etched plains and crater fill, irregular mesas, and pedestal craters. Local evidence occurs for the possible former presence of ground ice or ice sheets approximately 100 km across; however, we disagree with a hypothesis that suggest that the entire south rim and much of the floor of Hellas have been glaciated. Orientations of dune fields and yardangs in lower parts of Hellas basin follow directions of the strongest winds predicted by a recently published general circulation model (GCM). Transient frost and dust splotches in the region are, by contrast, related to the GCM prediction for the season in which the images they appear in were taken.

Tanaka, Kenneth L.↗

Geology and landscape evolution of the Hellas region of Mars

Hellas basin on Mars has been the site of volcanism, tectonism, and modification by fluvial, mass-wasting, and eolian processes over its more than 4-b.y. existence. Our detailed geologic mapping and related studies have resulted in the following new interpretations. The asymmetric distribution of highland massifs and other structures that define the uplifted basin rim suggest a formation of the basin by the impact of a low-angle bolide having a trajectory heading S 60 deg E. During the Late Noachian, the basin was infilled, perhaps by lava flows, that were sufficiently thick (>1 km) to produce wrinkle ridges on the fill material and extensional faulting along the west rim of the basin. At about the same time, deposits buried northern Malea Planum, which are interpreted to be pyroclastic flows from Amphitrites and Peneus Paterae on the basis of their degraded morphology, topography, and the application of a previous model for pyroclastic volcanism on Mars. Peneus forms a distinctive caldera structure that indicates eruption of massive volumes of magma, whereas Amphitrites is a less distinct circular feature surrounded by a broad, low, dissected shield that suggests generally smaller volume eruptions. During the Early Hesperian, an approx. 1- to 2-km-thick sequence of primarily fined-grained, eolian material was deposited on the floor of Hellas basin. Subsequently, the deposit was deeply eroded, except where armored by crater ejecta, and it retreated as much as 200-300 km along its western margin, leaving behind pedestal craters and knobby outliers of the deposit. Local debris flows within the deposit attest to concentrations of groundwater, perhaps in part brought in by outflow floods along the east rim of the basin. These floods may have deposited approx. 100-200 m of sediment, subduing wrinkle ridges in the eastern part of the basin floor. During the Late Hesperian and Amazonian, eolian mantles were emplaced on the basin rim and floor and surrounding highlands. Their subsequent erosion resulted in pitted and etched plains and crater fill, irregular mesas, and pedestal craters. Local evidence occurs for the possible former presence of ground ice or ice sheets approx. 100 km across; however, we disagree with a hypothesis that suggests that the entire south rim and much of the floor of Hellas have been glaciated. Orientations of dune fields and yardangs in lower parts of Hellas basin follow directions of the strongest winds predicted by a recently published general circulation model (GCM). Transient frost and dust splotches in the region are, by contrast, related to the GCM prediction for the season in which the images they appear in were taken.

Tanaka, Kenneth L.↗

Linking microstructure to creep behavior in vertically and horizontally built LPBF Haynes 282 compared with wrought material via θ -projection

Laser Powder Bed Fusion (LPBF) has emerged as a promising route for fabricating intricate geometries in high-performance alloys. Haynes 282 (H282) is a strong candidate for applications such as heat exchangers or engines due to its excellent creep strength and thermal stability; however, the long-term creep behavior of LPBF-processed H282 remains poorly understood. In this study, the θ -projection method is used to analyze and extrapolate the creep behavior of vertically built LPBF, horizontally built LPBF, compared to wrought H282 tested at 816 °C. Vertically built LPBF H282 exhibits the lowest minimum creep rate (MCR), while the horizontally built condition shows a higher MCR comparable to that of wrought H282. Despite these differences, both LPBF conditions exhibit significantly shorter rupture life and reduced rupture strain than the wrought material, with the most severe degradation observed in the horizontal builds, consistent with an earlier onset of tertiary creep and accelerated strain-rate evolution. Microstructural characterization reveals that both LPBF and wrought H282 exhibit abundant twin-related boundary character; however, their grain boundary topologies differ markedly. The wrought alloy contains a higher fraction of low-angle grain boundaries and continuous twin lamellae, whereas the LPBF microstructure is characterized by a suppressed low-angle boundary population and fragmented twin-related boundaries embedded within irregular high-angle grain boundary networks. Fractographic analysis further reveals predominantly intergranular cracking in LPBF H282, accompanied by grain-boundary-decorated carbides, Al 2 O 3 inclusions, and high-aspect-ratio pores. These results demonstrate that grain boundary topology, rather than minimum creep rate alone, plays a critical role in governing creep damage accumulation and rupture behavior in LPBF and wrought H282.

Creep↗

Uncertainty quantification in the presence of limited climate model data with discontinuities.

Uncertainty quantification in climate models is challenged by the prohibitive cost of a large number of model evaluations for sampling. Another feature that often prevents classical uncertainty analysis from being readily applicable is the bifurcative behavior in the climate data with respect to certain parameters. A typical example is the Meridional Overturning Circulation in the Atlantic Ocean. The maximum overturning stream function exhibits a discontinuity across a curve in the space of two uncertain parameters, namely climate sensitivity and CO2 forcing. In order to propagate uncertainties from model parameters to model output we use polynomial chaos (PC) expansions to represent the maximum overturning stream function in terms of the uncertain climate sensitivity and CO2 forcing parameters. Since the spectral methodology assumes a certain degree of smoothness, the presence of discontinuities suggests that separate PC expansions on each side of the discontinuity will lead to more accurate descriptions of the climate model output compared to global PC expansions. We propose a methodology that first finds a probabilistic description of the discontinuity given a number of data points. Assuming the discontinuity curve is a polynomial, the algorithm is based on Bayesian inference of its coefficients. Markov chain Monte Carlo sampling is used to obtain joint distributions for the polynomial coefficients, effectively parameterizing the distribution over all possible discontinuity curves. Next, we apply the Rosenblatt transformation to the irregular parameter domains on each side of the discontinuity. This transformation maps a space of uncertain parameters with specific probability distributions to a space of i.i.d standard random variables where orthogonal projections can be used to obtain PC coefficients. In particular, we use uniform random variables that are compatible with PC expansions based on Legendre polynomials. The Rosenblatt transformation and the corresponding PC expansions for the model output on either side of the discontinuity are applied successively for several realizations of the discontinuity curve. The climate model output and its associated uncertainty at specific design points is then computed by taking a quadrature-based integration average over PC expansions corresponding to possible realizations of the discontinuity curve.

54 ENVIRONMENTAL SCIENCES↗

Dual-scale folding in cutting of commercially pure aluminum alloys

We examine a, hitherto, little-studied and curious machining chip morphology, with tell-tale signs of folding at two different length scales, that is common in cutting of certain ductile and highly strain-hardening metals like soft aluminum alloys, tantalum and niobium. This chip morphology does not appear in the usual catalogues of common chip types. The mechanics of formation of the “dual-scale folded chip” is studied in model material systems of commercially pure aluminum alloys (AA 1100 and AA 8040), that prominently exhibit this chip morphology. The flow, folding and associated plastic instabilities are investigated using micro/macro structure observations of the chip in a plane-strain cutting framework, with high-speed in situ imaging and image analysis of material flow; and force measurements. The smaller-scale folding is shown to develop in the primary deformation zone while the larger-scale folding occurs as the chip traverses the rake face of the tool. The resulting chip is composed of irregularly-spaced large folds, superimposed onto which are the quasi periodic small folds. The representative wavelengths of the two folds differ on average by an order of magnitude, 0.1 mm vs. 2 mm. The observations reveal a direct coupling between the material flow and chip morphology, and how specific attributes of the dual-scale folded chip arise from the flow mechanism. Plastic buckling is found to play a key role in the folding at both length scales. The small-scale folds are characteristic of a sinuous plastic flow mode, while the large-scale folding is characterized by buckling and stick-slip along the tool rake face, triggered by adhesive pinning of the chip to the tool. Important consequences of the dualscale folding are very large cutting forces, and force oscillations of large amplitude, despite the alloys being very soft, only ~ 25 HV. Here, the dual-scale folding is why many of these alloys are classified as “gummy” to machine. Since the dual-scale folded chip is associated with large cutting forces and poor surface quality, there is much to be gained by disrupting this flow type in practical machining applications. Methods for controlling the folding to improve machining performance with the gummy alloys are briefly discussed.

36 MATERIALS SCIENCE↗

WE-DE-BRA-11: A Study of Motion Tracking Accuracy of Robotic Radiosurgery Using a Novel CCD Camera Based End-To-End Test System

Purpose: A novel end-to-end test system using a CCD camera and a scintillator based phantom (XRV-124, Logos Systems Int’l) capable of measuring the beam-by-beam delivery accuracy of Robotic Radiosurgery (CyberKnife) was developed and reported in our previous work. This work investigates its application in assessing the motion tracking (Synchrony) accuracy for CyberKnife. Methods: A QA plan with Anterior and Lateral beams (with 4 different collimator sizes) was created (Multiplan v5.3) for the XRV-124 phantom. The phantom was placed on a motion platform (superior and inferior movement), and the plans were delivered on the CyberKnife M6 system using four motion patterns: static, Sine- wave, Sine with 15° phase shift, and a patient breathing pattern composed of 2cm maximum motion with 4 second breathing cycle. Under integral recording mode, the time-averaged beam vectors (X, Y, Z) were measured by the phantom and compared with static delivery. In dynamic recording mode, the beam spots were recorded at a rate of 10 frames/second. The beam vector deviation from average position was evaluated against the various breathing patterns. Results: The average beam position of the six deliveries with no motion and three deliveries with Synchrony tracking on ideal motion (sinewave without phase shift) all agree within −0.03±0.00 mm, 0.10±0.04, and 0.04±0.03 in the X, Y, and X directions. Radiation beam width (FWHM) variations are within ±0.03 mm. Dynamic video record showed submillimeter tracking stability for both regular and irregular breathing pattern; however the tracking error up to 3.5 mm was observed when a 15 degree phase shift was introduced. Conclusion: The XRV-124 system is able to provide 3D and 4D targeting accuracy for CyberKnife delivery with Synchrony. The experimental results showed sub-millimeter delivery in phantom with excellent correlation in target to breathing motion. The accuracy was degraded when irregular motion and phase shift was introduced.

60 APPLIED LIFE SCIENCES↗

End-user Assessment of the NASA SPoRT GLM Stoplight Product

National Weather Service (NWS) offices monitor and forecast the threat for lightning within their County Warning Areas for various impact-based decision support services (IDSS). These forecasts are provided routinely for aviation operations, but irregularly for large-scale, outdoor events, which typically have varying safety requirements with regards to lightning. Lightning monitoring and forecasting can require synthesizing a plethora of data, so products that make this process more efficient and effective are sought by the operational community. The NASA Short-term Prediction Research and Transition (SPoRT) Center has begun to develop several products to address these operational challenges during the lifecycle of lightning activity, and conduct evaluations in concentrated (Research-to-Operations/Operations-to-Research) efforts. The product evaluated for this study is the Geostationary Lightning Mapper (GLM) Stoplight product, which addresses lightning safety specifically with regards to lightning recency and cessation. The GLM Stoplight product displays the spatial extent of lightning and uses color-coded pixels to show the recency of lightning in 10-minute increments. This presentation highlights results from an assessment of the GLM Stoplight product by select NWS offices, as well as emergency managers, that took place over a 5-week period from May 1st to June 2nd. Feedback was collected on the GLM Stoplight product and on a new and interactive lightning viewer, which allowed participants to tailor visualization of the product based on their location and desired application. Results will help NASA SPoRT gain a better understanding of how forecasters and emergency managers use lightning data for safety applications. In addition, the assessment will inform research on any necessary modifications to this and future lightning products to assist end users.

Kelley Murphy↗

Understanding the deformation mechanisms in Ni-based superalloys with using crystal plasticity finite element method

Nl-based superalloy is considered as a good candidate due to its excellent resistance to elevated temperature deformation for long term period application. Understanding the deformation and failure mechanisms of Ni-Based superalloys is very helpful for providing design guidelines for processing Ni-based superalloys. Experimental characterization indicates that the deformation mechanisms of Ni based superalloy is strongly microstructure dependent. Besides, damage transform from the void nucleation to the macro cracks by voids growth leading to the failure of the Ni-based superalloys are also showing strong microstructure sensitivity. Therefore, this work focuses on the prediction and comprehension of the deformation and void growth behavior in Ni based superalloy at different working conditions via crystal plasticity finite element modeling and simulation. Physically based crystal plasticity frameworks were developed for newly Ni- based superalloy Haynes 282. It was found that dislocation shearing through the precipitates were acting as the main contributor to the strength of Haynes 282 at room temperature and 815°C. Our analysis of the creeping behavior of Haynes 282 exhibited that resistance of general climb replaced by the resistance induced by the deposited climb dislocation density. In addition, in the study of void growth behavior, our simulation results demonstrated that as the main loading axis perpendicular to the grain boundary (GB), voids grow more slowly on tilt GBs in bicrystals than those in single and bicrystals with twist GBs. And tilt GBs would promote the void grow into irregular shape.

36 MATERIALS SCIENCE↗

Evaluation of the Validity of Bio-Mathematical Models in Predicting Fatigue in an Operational Environment

During long-duration spaceflight missions, crewmembers and ground-support staff experience irregular sleep schedules, erratic natural light patterns, and high workload due to mission demands. Such conditions can cause circadian misalignment and sleep loss, which in turn cause deficits in cognitive performance. While bio-mathematical models have been implemented within workplace settings to predict fatigue profiles, the accuracy of sleep-wake models under conditions of non-traditional shiftwork is little known. Thus, the present study aims to evaluate the validity of four sleep-wake models (e.g., SAFTE-FAST, the Unified Model of Performance, the Adenosine-Circadian Model, and the State-Space Model) designed to predict human performance and fatigue levels against objective measures of performance in a spaceflight analog. To accomplish this aim, we will collect Psychomotor Vigilance Task (PVT) data from four crews (n=16) in the Human Exploration Research Analog (HERA) over 45 days. HERA is a closed, 3-story habitat at Johnson Space Center where inhabitants are exposed to extreme space exploration scenarios under varying sleep-wake conditions. The PVT is a simple reaction time test that involves minimal learning, making it sensitive to the effects of sleep loss and circadian misalignment. Findings from this study will help inform work scheduling and implementation of effective countermeasures (e.g., caffeine, lighting) to improve work efficiency and combat fatigue, as well as offer valuable insight into the applicability of bio-mathematical fatigue models in future space exploration missions.

fatigue↗

ITEAM - An international mechanistic approach to modeling glass behavior over geologic time scales - 15527

Vitrification is a common worldwide solution for radioactive waste immobilization. Although the excellent chemical durability of glass has been demonstrated in ancient man-made and natural analogues, the lack of an international consensus on a glass corrosion rate law limits the application of glass in high-level waste repository performance models. The contributions of physical and chemical processes controlling the long-term glass dissolution rate in geologic disposal remain uncertain resulting in this non-consensus. A thorough mechanistic understanding of waste form durability in geologic environments would improve public and regulator confidence. In addition, this understanding could lead to cost savings if it becomes possible to take credit for the true durability of the waste form itself in system evaluations rather than requiring expensive engineered barrier systems. To this end, five nations (US, UK, France, Japan, and Belgium) have joined together to formulate a joint plan for collaborative research into the mechanisms controlling the long-term corrosion of glass. Over the last five years, the coordinated research performed by these countries has produced a new level of understanding about the glass corrosion mechanisms, specifically as they apply to glasses similar in composition to the French R7T7 glass. Some recent results are presented as they relate to several mechanisms that are thought to control glass alteration at long time periods. It is important to understand the effects of each particular mechanism on the overall radionuclide release and the relative importance of each process model to the performance assessment calculation. In addition, a new series of experiments calls out potential sources of error due to the use of irregular shapes (such as crushed glass powder) in dissolution experiments. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Shock Compression and Strain Rate Effect in Composites and Polymers

Polymers are increasingly being utilized as monolithic materials and composite matrices for structural applications historically reserved for metals. High strain and high strain-rate applications in aerospace, defense, and automotive industries have lead to interest in utilizing the ability of many polymers to withstand extensions to failure of several hundred percent, often without localization or necking and their strong rate dependence. A broad range of characterization techniques will be presented for semi-crystalline polymers and composites including elastic-plastic fracture, split Hopkinson pressure bar (SHPB), plate impact including soft-recovery and lateral gage measurements and Taylor Impact. Gas-launched, plate impact experiments have been performed on pedigreed PTFE 7C, mounted in momentum-trapped, shock assemblies, with impact pressures above and below the phase II to phase III crystalline transition to probe subtle changes in the crystallinity, microstructure, and mechanical response of PTFE. Observed strong anisotropy on the hugoniot and spall behavior of fiber-reinforced composites will be discussed. Polymers are known to exhibit a strong dependence of the yield stress on temperature and strain-rate that are often observed to be linear for temperature and logarithmic for strain-rate. Temperature and strain-rate dependence will be reviewed in terms of classic time-temperature superposition and an empirical mapping function for superposition between temperature and strain-rate. The recent extension of the new Dynamic-Tensile-Extrusion (Dyn-Ten-Ext) technique to probe the dynamic tensile responses of polymers will be discussed, where more irregular deformation and stochastic-based damage and failure mechanisms than the stable plastic elongation and shear instabilities observed that in metals. The opportunity to use of Dyn-Ten-Ext to probe incipient damage at very high strain-rate by linking in situ and post mortem experimental observations with high-fidelity simulation will be introduced. The potential to study polymer deformation under even more extreme conditions by employing explosive drive to induce Rayleigh-Taylor (RT) growth linking with in situ diagnosis by proton radiography will be proposed. Finally, a case study of collaboration between experimentalists and modelers to study the shock induced phase transition of PTFE presented. Building on a history of shock and Diamond Anvil Cell data it has long been know that PTFE exhibits a pressure induced phase transition at 0.7 GPa. The transition has historically been assumed and reported to be dependent on the hydrostatic pressure. However, studies employing neutron diffraction have suggested the phase transition is driven by only the principle stress applied to the compliant direction of crystalline domain. A multiphase model based on the Maxwell-type viscoelastic formulation was developed to include the stress deviator to drive potential martensitic transition and time to reflects the kinetic nature of the transitions demonstrating the need to account for both a martensitic nature and kinetics of the transition to capture subtle experimental observables.

36 MATERIALS SCIENCE↗

SU-C-201-01: Core/shell and Multishell Colloidal Quantum Dots Nanodosimeters Behaviour Under Repeated MV and KV Irradiations

Purpose: This study intends to characterize the energy dependence of the effect of radiation damage on CdSe multi-shell (MS) (CdS/CdZnS/ZnS) and CdSe core/shell (CS)(ZnS) cQDs. It also aims to investigate irregularities resulting of pauses between subsequent irradiations. Methods: Radioluminescence (RL) measurements were performed with a CCD camera as dose was cumulated by the cQDs (up to 10 kGy), for beam energies 120 kVp, 220 kVp and 6 MV. Repeated expositions of 1999 MU were cumulated. Pauses between subsequent irradiations were varied from 2 to 50 minutes. cQDs photoluminescence (PL) and RL spectral stability was tracked by quantifying the position and FWHM of the luminescence peak. Results: Both types of cQDs showed a clear energy dependence of the RL signal decrease between the kV and the MV beams. For 1.2 kGy of dose cumulated, MS cQDs had 92% of the initial signal left at 6 MV compared to 98% at 120 kVp. The same was observed for CS cQDs: 87% at 6 MV vs 94% at 120 kVp. MS cQDs were found to have a systematic (though small, ∼1%) RL intensity recovery for pauses of 15 minutes or more, while CS cQDs maintain a stable loss regardless of the pause duration. PL and RL spectral measurements revealed a good stability (< 1% variation of the peak position and FWHM) for both types of cQDs. Conclusion: In all, both MS and CS cQDs have a sufficient resistance to large doses of radiation for standard radiation therapy and imaging. Since this resistance is better for lower energy, the utilization of cQDs could be optimized for low energy applications (e.g. theragnostic applications for small animal studies and others). Finally, the ionizing radiation damage mechanisms for this new type of nano-scintillator still have to be identified properly.

60 APPLIED LIFE SCIENCES↗

Magnetized Target Fusion Driven by Plasma Liners

Magnetized target fusion (MTF) attempts to combine the favorable attributes of magnetic confinement fusion (MCF) for energy confinement with the attributes of inertial confinement fusion (ICF) for efficient compression heating and wall-free containment of the fusing plasma. It uses a material liner to compress and contain a magnetized plasma. For practical applications, standoff drivers to deliver the imploding momentum flux to the target plasma remotely are required. Spherically converging plasma jets have been proposed as standoff drivers for this purpose. The concept involves the dynamic formation of a spherical plasma liner by the merging of plasma jets, and the use of the liner so formed to compress a spheromak or a field reversed configuration (FRC). For the successful implementation of the scheme, plasma jets of the requisite momentum flux density need to be produced. Their transport over sufficiently large distances (a few meters) needs to be assured. When they collide and merge into a liner, relative differences in velocity, density and temperature of the jets could give rise to instabilities in the development of the liner. Variation in the jet properties must be controlled to ensure that the growth rate of the instabilities are not significant over the time scale of the liner formation before engaging with the target plasma. On impact with the target plasma, some plasma interpenetration might occur between the liner and the target. The operating parameter space needs to be identified to ensure that a reasonably robust and conducting contact surface is formed between the liner and the target. A mismatch in the "impedance" between the liner and the target plasma could give rise to undesirable shock heating of the liner leading to increased entropy (thermal losses) in the liner. Any irregularities in the liner will accentuate the Rayleigh-Taylor instabilities during the compression of the target plasma by the liner.

Thio, Y. C. Francis↗

Numerical simulation of torus-driven plasma transport in the Jovian magnetosphere

The Rice convection model has been modified for application to the transport of Io-generated plasma through the Jovian magnetosphere. The new code, called the RCM-J, has been used for several ideal-magnetohydrodynamic (MHD) numerical simulations to study how interchange instability causes an initially assumed torus configuration to break up. In simulations that start from a realistic torus configuration but include no energetic particles, the torus disintegrates too quickly (approximately 50 hours). By adding an impounding distribution of energetic particles to suppress the interchange instability, resonable lifetimes were obtained. For cases in which impoundment is insufficient to produce ideal-MHD stability, the torus breaks up predominantly into long fingers, unless the initial condition strongly favors some other geometrical form. If the initial torus has more mass on one side of the planet than the other, fingers form predominatly on the heavy side (which we associate with the active sector). Coriolis force bends the fingers to lag corotation. The simulation results are consistent with the idea that the fingers are formed with a longitudinal thickness that is roughly equal to the latitudinal distance over which the invariant density declines at the outer edges of the initial torus. Our calculations give an average longitudinal distance between plasma fingers of about 15 deg which corresponds to 20 to 30 minutes of rotation of the torus. We point to some Voyager and Ulysses data that are consistent with this scale of torus longitudinal irregularity.

Yang, Y. S.↗

Completion Effects on Diagnosing Multistage Facture Treatments with Distributed Temperature Sensing

Summary Distributed temperature sensing (DTS) is a valuable tool to diagnose multistage hydraulic fracture treatments. When a stage interval is shut in, the clusters that take more fluid during pumping warm up more slowly. Therefore, the fluid volume injected into each cluster can be quantitatively interpreted by numerical inversion of the warm-back temperature behavior. This general concept assumes that the different warm-back behavior is controlled by only the injected fluid volume; however, recent observations of DTS data indicate that completion configurations significantly influence the warm-back behavior. This paper investigates the completion effects on the DTS interpretation. In ideal conditions, when a stage is fractured, the upstream stage intervals should show an almost uniform temperature that is close to the injected fluid temperature. This is due to the high fluid velocity of injected fluid in the wellbore, and the upstream intervals have not been perforated (noncommunicating intervals), so the only heat transfer is heat conduction between the wellbore fluid and the surrounding reservoir. But the field DTS data show considerably irregular variations in temperature along the upstream stage intervals. These variations are caused by the completion effects. The nonuniform temperature profile is caused by different heat transfer behavior induced by completion hardware along the production casing string, such as joints, clamps, and blast protectors, and by the sensing cable location in the cement, as well as the cement quality. Because the varying heat transfer behavior impacts the warm-back behavior as well as the temperature profile, the completion effects need to be considered in DTS interpretation. A method of DTS interpretation considering the completion effects to diagnose multistage fracture treatments was developed. Because the heat transfer between a wellbore and a reservoir depends on the overall heat transfer coefficient describing heat conduction through the completion in a forward model, this parameter needs to be tuned all along the wellbore. To calibrate the completion effect, the temperature inversion is conducted using the temperature measured at a stage interval that is upstream of a stage interval currently being treated. Because the interpreted stage interval is not perforated at that time, the thermal behavior at the noncommunicating interval is governed by only the heat conduction through the completion environment. Once the effective values of the overall heat transfer coefficient are estimated along the interpreted stage interval, they can be assumed to be constant physical parameters. Then, the fluid volume distribution is interpreted by using the effective overall heat transfer coefficient profile along each interval. This study provides a field application of the developed interpretation method. The new interpretation method provides more accurate diagnosis of fracture treatments by DTS interpretation.

Engineering↗