Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ion Exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Mineral Recovery Enhanced Desalination (MRED) process: An innovative technology for desalinating hard brackish water

Desalination of water containing high concentrations of calcium, dissolved carbon dioxide, sulfate, silica and other sparingly soluble salts is difficult because of the scaling potential. An innovative pre-treatment scheme was investigated at bench scale that selectively removes these constituents and produces a soft water to enable desalination with high feed water recovery. The process first removes dissolved carbon dioxide by air stripping at low pH. Magnesium is removed by precipitation at high pH. Calcium is removed by ion exchange (IX), and sulfate is removed by nanofiltration (NF). Cation regenerant from IX, containing calcium, and concentrate from NF, containing sulfate, is combined to precipitate gypsum. Concentrate from the desalination process consisting of a concentrated NaCl solution is used to regenerate the IX resins. The selective precipitation, IX, and NF processes were tested in laboratory experiments and produced magnesium hydroxide and gypsum at greater than 90% and 95% purity respectively. A process model was developed to calculate process performance, mass and liquid flow rates. Finally, the MRED process offers the following benefits: 1) greater recovery of brackish feedwater by a desalination process, 2) recovery of marketable commodities and 3) reduction in the volume and mass of waste products from the treatment process.

42 ENGINEERING↗
DOE OSTI2024

Rhenium Isotope Reconnaissance of Uranium Ore Concentrates

Exploration of natural isotopic variations of the element rhenium (Re) is in its infancy, with initial studies revealing isotopic fractionation in a variety of geological materials. Here, in this work, we investigate Re isotope variation as a new geochemical tool, given its redox-sensitive properties and affinity for organic matter and sulfides. In this work, Re abundance and isotope ratio data were collected from uranium ore concentrates (UOCs) across a variety of depositional ages, locations, geologic settings, and deposit types. Ore types from which the UOC were derived include sandstone, unconformity, and quartz-pebble (QP) conglomerate. To isolate Re from the U-rich matrix of UOCs, a new purification method utilizing DGA ion exchange resin was developed. We found that UOCs exhibit a wide range of Re isotope ratios, with sandstone ore-derived UOCs having the isotopically lightest values, QP conglomerate ore-derived UOCs having the heaviest, and unconformity ore-derived UOCs in between (with some overlap with sandstone UOCs). The Re isotope ratio range observed in UOCs extends previously reported values by more than a factor of two. Industrial processing (e.g., incomplete recovery of Re from ore, contamination, fractionation during processing) may play a role in the isotopic variability in the UOCs. However, systematic differences between ore types suggest that the depositional setting is a significant factor. For nuclear forensic investigations, Re isotopic compositions combined with data from other isotopic systems provide geochemical signatures that can aid in provenance assessment of UOCs. Regardless of the specific causes for the wide range of Re isotope ratios in UOCs, these initial data indicate Re is a promising tool for nuclear forensic investigations on samples from early in the nuclear fuel cycle.

58 GEOSCIENCES↗
DOE OSTI2020

Decontamination of urban surfaces contaminated with radioactive materials and consequent onsite recycling of the waste water

Enhancing rapid remediation strategies is paramount for recovery after a large-scale nuclear contamination event in an urban environment. Some current strategies recommend use of readily available equipment, materials, and facilities to expedite recovery. For example, applying pressurized water to contaminated surfaces may effectively remove radioactive contamination. In this study, a commercial power washer removes soluble forms of 152 Eu 3 + , 85 Sr 2 + , and 137 Cs + contamination from common porous building materials, and computer simulations characterize the recycling of the resultant contaminated wash water. Pressure washing the porous building materials under spray conditions typical with do-it-yourself units improved decontamination factors (DFs) for 152 Eu compared to low-pressure application of tap water (majority of two-tailed t-test p-values < 0.1), but pressure did not improve DFs for 137 Cs or 85 Sr. For both pressurized and low-pressure applications, adding potassium ions (K + ) to promote ion exchange reactions produced significantly higher DFs for tested radionuclides on asphalt, brick, and concrete. The resultant contaminated wash water can be processed through self-prepared chemical filtration beds of clay and sand. Modeled in a prior study, the beds yielded linear trends (R 2 > 0.98) in sensitivity analyses between most bed configuration variables and bed performance variables, permitting flexible ad-hoc bed design. The experimental and simulation results led to estimates of the remediation rate and waste generated after cleaning 250 m 2 of cesium-contaminated concrete from the combined deployment of a power washer and two different mobile treatment beds. Furthermore, the first treatment bed was designed to reduce treatment time and processed 1900 L of wash solution in 70 min using 880 kg of clay/sand infill material. Designed to reduce the solid waste generated, the second bed processed the same solution volume in 1040 min (17 h) using 170 kg of clay/sand infill material. The results of this analysis warrant further investigation of power washing with recycled salt solution as an effective rapid decontamination method with manageable waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Linking low and high temperature NO oxidation mechanisms over Brønsted acidic chabazite to dynamic changes of the active site

The oxidation of NO over Brønsted acid sites in chabazite (CHA) zeolites shows an atypical temperature dependence; at low temperature the apparent activation energy is negative, but it becomes positive as the temperature exceeds a transition temperature. To explain this behavior we used density functional theory and statistical mechanics to investigate high and low temperature mechanisms for this reaction and propose a dynamic active site change in response to temperature variation. Our simulations show that the apparent activation barrier in the low temperature regime is more negative over Brønsted acidic CHA as compared to the siliceous zeolite framework. This effect is attributed to further enthalpic stabilization of the transition states by physical interaction with the H-CHA Brønsted acid sites. At elevated temperature, our calculations support both the existence and the significant catalytic role of NO+ in providing a modified active site. The temperature dependent transformation of the active site from H-CHA to NO-CHA sites may occur via two plausible ion-exchange mechanisms that define a transition temperature for the reaction. This transition temperature can be tuned by incorporating different trivalent metal atoms (B, Al, Ga or In) within the CHA framework. We found the lowest transition temperature for H-[In] CHA and H-[Ga]CHA. Here, the ability to control the dynamic response of the active site and the associated switch between low and high temperature mechanism with negative and positive apparent activation energy, respectively, is of fundamental interest for the design of zeolite catalysts operating in the presence of NO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Delplot kinetic method applied to systems with adsorbates: Hydrodeoxygenation of benzofuran on a bimetallic CoPd phosphide catalyst supported on KUSY

The Delplot method provides a means of analyzing conversion and selectivity data to derive a reaction sequence and has been applied so far to gas-phase or liquid-phase species. This study analyses the applicability of the method for catalytic reactions and considers for the first time adsorbed intermediates. The method is applied to a contact time study of the hydrodeoxygenation (HDO) of benzofuran at 0.5 MPa and 350 °C over a catalyst consisting of bimetallic CoPd phosphide supported on a potassium ion-exchanged ultra-stable Y (KUSY) zeolite. Both simple and detailed reaction networks were derived. The simple networks considered only gas-phase species and were modeled by a first-order sequence of steps, whereas the detailed network took into account adsorbed intermediates and was simulated using a rake mechanism. The networks were compared using F-statistics, which accounted for the differences in the number of fitting parameters. The detailed network gave a better fit to the experimental data because it represented a more realistic description of the transformation. A suggested sequence from the Delplot method was consistent with the simple network but not with the detailed network. The lack of applicability of the Delplot analysis to the network with adsorbates was linked to overly large equilibrium constants, a determination supported by Delplot fitting for a model sequence. Further, this study indicated the inapplicability of the Delplot method in determining reaction sequences that involve adsorbed species with large equilibrium constants for formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Application of Fe-doped biochar in Cr(VI) removal from washing wastewater and residual Cr(VI) immobilization in contaminated soil

High-content Cr(VI)-contaminated soils are challenging to remediate using a single remediation technique. This study combined soil washing and immobilization to remediate high-content (3440 mg kg -1 ) Cr(VI)-contaminated soil, which investigated the effects of operating time, temperature, and liquid-solid ratio (LSR) on the Cr(VI) removal efficiency of soil washing and evaluated the potential of Fe-doped biochar (FeBC) in soluble Cr(VI) removal from the washing wastewater and residual Cr(VI) immobilization in the washed soil. The Cr(VI) removal efficiency of soil washing increased with the operating time, temperature, and LSR, but still cannot remove Cr(VI) to achieve the safety content (<100 mg kg -1 ). FeBC showed satisfactory potential in both Cr(VI) removal and immobilization from wastewater and soil, in which the main mechanisms involve ion exchange, redox, and coprecipitation. These results demonstrate applying soil washing & immobilization to remediate high-content Cr(VI)-contaminated soil is a promising alternative method.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Part I: Predicting performance of Purolite A532E resins for remediation of comingled contaminants in groundwater

Ion exchange (IX) resins are used in pump-and-treat (P&T) facilities to remove soluble groundwater contaminants. However, natural anions present at concentrations orders of magnitude higher than contaminants can compete for IX sites and impact resin lifecycles. Here, the Hanford Site’s 200 West Area P&T facility (Washington State, USA) was selected as a case study because it currently uses two IX resins: Purolite® A532E (A532E) to remove pertechnetate (TcO 4 - ) and DOWEX 21K (DOWEX) to remove uranium from groundwater. Nitrate (NO 3 - ), sulfate (SO 4 2- ), chloride (Cl - ), and carbonate (CO 3 2- ) anions have been identified to potentially compete for A532E and DOWEX IX sites. Hanford-relevant anion groundwater concentrations were used to design a series of laboratory-scale batch experiments to evaluate the impact of competing anions on resin performance and potential kinetic effects. These data are then modeled to obtain Cl--normalized equilibrium exchange coefficients (K) needed to predict IX resin performance. The work is presented in two parts, with IX performance evaluated for A532E in Part I and DOWEX in Part II. Part I results demonstrate that TcO 4 - uptake is not impacted by NO 3 - , SO 4 2- , Cl - , CO 3 2- (as HCO 3 - ) and U(VI) carbonate anions, with K TcO4-/Cl- > 4,000, likely due to the high selectivity of A532E trihexylammonium sites for the large, weakly hydrated TcO 4 - anion. Other anion K values were K NO3-/Cl- = 20, K SO4--/Cl- = 0.2, K HCO3-/Cl- = 0.09, K U/Cl- = 370–1000. These K values provide conservative parameters for predicting A532E performance, and demonstrate that, under these test conditions, A532E will remove TcO 4 - from current and future influent streams to meet groundwater treatment objectives.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

A Kinetic Model of the Long-Term Corrosion of Glass-Ceramic Materials

Multiphase waste forms show promise for increased waste loading and for the ability to dispose of contaminated solid and particulate waste through direct densification. However, achieving predictive capability for long-term durability of multiphase waste forms, and thus assessing their possible deployment, requires expanding the current, limited knowledge base. Here, we describe the development of a corrosion model of a two-phase waste form consisting of crystals of known volume fraction embedded in a glass matrix. This model accounts for the dissolution of both the crystalline and glass phases as well as the hydration of the glass phase through an ion exchange reaction. Because of the large difference in solubility between the two phases, the reactive surface of the crystalline phase is a function of the extent of dissolution of the glass phase in this model. Model parameterization was performed using corrosion data, such as from single-pass flow-through tests, for the individual phases. The parameterized corrosion model was evaluated against static dissolution test data for a glass-ceramic multiphase waste form. This evaluation demonstrated the model’s ability to reproduce the time-dependent release of key tracers of glass and crystalline phase dissolution. Hence, the development of a kinetic model provides a pathway for long-term durability predictions and thus the use of multiphase waste forms in nuclear cleanup missions.

Kerisit, Sebastien N.↗
DOE OSTI2021

A low-cost sulfate-based all iron redox flow battery

Redox flow batteries (RFBs) are promising choices for stationary electric energy storage. Nevertheless, commercialization is impeded by high-cost electrolyte and membrane materials. Here, we report a low-cost all-iron RFB that features inexpensive FeSO 4 electrolytes, microporous membrane along with a glass fiber separator. The addition of 0.1 м 1-ethyl-3-methylimidazolium chloride (EMIC) overcomes the low solubility of FeSO 4 in water which is raised to 2.2 м. DFT calculations demonstrate that EMI + can strengthen the interaction between sulfate anions and water molecules. This electrolyte composition also allows both anode and cathode reactions to operate without actively maintaining a pH gradient between them, thus eliminating the need for expensive ion exchange membranes. The all-iron RFB demonstrates stable operation at a current density of 20 mA cm –2 for more than 800 cycles via a simple, periodic regeneration process. Furthermore, the system cost of FeSO 4 /EMIC RFBs is projected to be $ 50 per kWh due to its low-cost active materials and the inexpensive microporous membrane. Finally, this low-cost, high-concentration all-iron RFB is a promising stationary energy–storage system for storing renewable energy.

25 ENERGY STORAGE↗
DOE OSTI2022

Leaching of lanthanide and yttrium from a Central Appalachian coal and the ashes obtained at 550–950 °C

Here in this work, we investigated leaching of lanthanide and yttrium (REY) from a Central Appalachian coal and its ashes obtained at 550–950 °C with the main purpose of understanding the impact of ashing temperature on REY leachability in water, ammonium sulfate, and hydrochloric acid. It is found that the coal contains a negligible amount of water-soluble REY, less than 1% ion-exchangeable REY, and about 28% of HCl-soluble REY. Ashing leads to dramatic changes in REY leachability in both ammonium sulfate and hydrochloric acid solutions, which is believed to be related to transformation and redistribution of organically-associated REY in coal during the ashing process. Ashing temperature significantly affects REY leaching from coal ashes; higher ashing temperature results in lower REY leachability in both solutions. Clay minerals may play a significant role in changing the leachability of REY after ashing. In addition, the results also suggest that the organic matter in the coal is relatively enriched in heavy REY.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Iodine Immobilization by Materials through Sorption and Redox-Driven Processes: A Literature Review

Radioiodine-129 (129I) in the subsurface is mobile and limited information is available on treatment technologies. Scientific literature was reviewed to compile information on materials that could potentially be used to immobilize 129I through sorption and redox-driven processes, with an emphasis on ex-situ processes. Candidate materials to immobilize 129I include iron minerals, sulfur-based materials, silver-based materials, bismuth-based materials, ion exchange resins, activated carbon, modified clays, and tailored materials (metal organic frameworks (MOFS), layered double hydroxides (LDHs) and aerogels). Where available, compiled information includes material performance in terms of (i) capacity for 129I uptake; (ii) long-term performance (i.e., solubility of a precipitated phase); (iii) technology maturity; (iv) cost; (v) available quantity; (vi) environmental impact; (vii) ability to emplace the technology for in situ use at the field-scale; and (viii) ex situ treatment (for media extracted from the subsurface or secondary waste streams). Because it can be difficult to compare materials due to differences in experimental conditions applied in the literature, Part II of this review describes results of laboratory studies for selected materials using a standardized batch loading test.

Moore, Robert C.↗
DOE OSTI2023

Radionuclide transport in fractured chalk under abrupt changes in salinity

Internationally, it has been agreed that geologic repositories for spent fuel and radioactive waste are considered the internationally agreed upon solution for intermediate and long-term disposal. In countries where traditional nuclear waste repository host rocks (e.g., clay, salt, granite) are not available, other low permeability lithologies must be studied. Here, chalk is considered to determine its viability for disposal. Despite chalk's low bulk permeability, it may contain fracture networks that can facilitate radionuclide transport. In arid areas, groundwater salinity may change seasonally due to the mixing between brackish groundwater and fresh meteoric water. Such salinity changes may impact the radionuclides' mobility. In this study, radioactive U(VI) and radionuclide simulant tracers (Sr, Ce and Re) were injected into a naturally fractured chalk core. The mobility of tracers was investigated under abrupt salinity variations. Two solutions were used: a low ionic strength (IS) artificial rainwater (ARW; IS ~0.002) and a high IS artificial groundwater (AGW; IS ~0.2). During the experiments, the tracers were added to ARW, then the carrier was changed to AGW, and vice versa. Ce was mobile only in colloidal form, while Re was transported as a conservative tracer. Both Re and Ce demonstrated no change in mobility due to salinity changes. In contrast, U and Sr showed increased mobility when AGW was introduced and decreased mobility when ARW was introduced into the core. These experimental results, supported by reactive transport modeling, suggest that saline groundwater solutions promote U and Sr release via ion-exchange and enhance their migration in fractured chalk. Here the study emphasizes the impact of salinity variations near spent fuel repositories and their possible impact on radionuclide mobility.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

A new highly enriched 233 U reference material for improved simultaneous determination of uranium amount and isotope amount ratios in trace level samples

A highly-enriched 233 U reference material (>0.99987 n( 233 U)/n(U)) has been prepared and characterized for use as an isotope dilution mass spectrometry spike. An ion exchange separation was performed on 1 g of high purity 233 U to further reduce trace amounts of contaminant Pu in the material. The purified 233 U was then prepared as a master solution which was analyzed for molality of uranium by modified Davies and Gray titration. A portion of the master solution was quantitatively diluted and dispensed for reference material units. Selected units were analyzed for verification of uranium amount and to characterize uranium isotope amount ratios by multi-collector inductively couple plasma mass spectrometry. Furthermore, modelling of spike-corrected isotopic data show that the new spike will enable simultaneous measurements of uranium amount and isotope amount ratios with resulting uncertainties that are substantially less sensitive to over spiking than widely used 233 U certified reference materials.

233U↗
DOE OSTI2021

Efficient Removal of Per- and Polyfluoroalkyl Substances from Water with Zirconium-Based Metal–Organic Frameworks

Per- and polyfluoroalkyl substances (PFASs) are an emerging class of contaminants raising increased levels of concern due to their toxic, bioaccumulative, and persistent nature. Current solutions for removing PFAS from contaminated water rely on adsorption-based methods where commonly used sorbents, for example, activated carbons and ion-exchange resins, exhibit low adsorption capacity and a long equilibration time. Motivated by the generally deficient performance of these current materials, this work addresses the need for the discovery of advanced sorbents for high capacity and efficient PFAS removal. The zirconium-based metal–organic framework (MOF) NU-1000 was characterized for the adsorption of three perfluorosulfonic acids (PFSAs, C4–C8) and six perfluorinated carboxylic acids (PFCAs, C1–C9) from aqueous solutions. Here, the results indicate that NU-1000 exhibits outstanding adsorption capacities of 400–620 mg/g for PFSAs and 201–604 mg/g for PFCAs coupled with ultrafast adsorption kinetics featuring equilibrium times of <1 min. Complementary density functional theory calculations reveal that the PFAS@MOF adsorption mechanism is dominated by a combination of hydrogen bonding, electrostatic, and hydrophobic non-covalent PFAS–MOF interactions. Excellent regeneration and reusability characteristics were found, particularly nearly quantitative removal and recovery rates of NU-1000 after five consecutive adsoption and desorption cycles of PFAS. Additional adsorption testing using PFAS-contaminated groundwater samples obtained from U.S. Air Force bases revealed impressive PFAS removal rates of 75–98% within 10 min regardless of the presence of co-contaminants. To the best of our knowledge, the suite of herein presented PFAS sorption characteristics—capacity, kinetics, regeneration, and reusability—significantly outperforms other current sorbents, rendering NU-1000 as a promising platform for the rapid and effective removal of PFAS from aqueous media.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Synthesis and Properties of Bulk Mg 3 WN 4 in a Wurtzite-Derived Structure

Experimental synthesis of theoretically predicted materials with controlled elemental coordination environments can lead to the realization of useful properties, such as facile ion transport or ferroelectric switching. Among such materials are ternary nitrides in the Mg−W−N composition space, where several stable and metastable compounds have been predicted and synthesized recently in bulk and film forms. Here, we report for the first time on the bulk synthesis of Mg 3 WN 4 in a wurtzite-derived crystal structure via a solid-state metathesis reaction. In situ synchrotron powder X-ray diffraction shows how the ion exchange proceeds from Li 6 WN 4 + MgCl 2 precursors to Mg 3 WN 4 + LiCl products, with the reaction starting slowly near 380 °C and completing by 600 °C, including the presence of a competing disordered rocksalt-derived phase (Mg,W)N above 440 °C. The follow-up ex situ powder synthesis at 400 °C for 0.5 h with 10% excess MgCl 2 reveals the cation-ordered nature of the wurtzite-derived Mg 3 WN 4 structure with polar symmetry confirmed by second-harmonic generation measurements. Optical absorption spectra, chemical composition analysis, and electron microscopy imaging suggest that bulk Mg 3 WN 4 obtained via metathesis reaction is prone to defect formation. Overall, this study shows that selective ex situ synthesis of the phase-pure ternary nitrides, informed by in situ measurements, is possible by carefully controlling the thermal budget of the reaction and paves the way toward property characterization of the Mg 3 WN 4 wurtzite-derived material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Molecular Imaging Reveals Two Distinct Mixing States of PM 2.5 Particles Sampled in a Typical Beijing Winter Pollution Case

Mixing states of aerosol particles are crucial for understanding the role of aerosols in influencing air quality and climate. However, a fundamental understanding of the complex mixing states is still lacking because most traditional analysis techniques only reveal bulk chemical and physical properties with limited surface and 3-D information. In this research, 3-D molecular imaging enabled by ToF-SIMS was used to elucidate the mixing states of PM 2.5 samples obtained from a typical Beijing winter haze event. In light pollution cases, a thin organic layer covers separated inorganic particles, while in serious pollution cases, ion exchange and an organic-inorganic mixing surface on large-area particles were observed. Finally, the new results provide key 3-D molecular information of mixing states, which is highly desirable for reducing uncertainty and bias in representing aerosol-cloud interactions in current Earth System Models, and improving the understanding of aerosols on air quality and human health.

3-D molecular imaging↗
DOE OSTI2025

Adsorption and Chromatographic Behavior of Dispersed Sodium Bismuthate Systems for the Separation of Americium from Curium

The selective partitioning of americium (Am) and curium (Cm) is integral for nuclear science areas such as the nuclear fuel cycle, stockpile stewardship, and isotope production but remains a long-standing radioanalytical challenge due to nearly identical chemical properties. Differences in redox chemistry can be exploited since Am can be oxidized to the hexavalent oxidation state. Sodium bismuthate (NaBiO 3 ) exhibits favorable oxidation and ion exchange characteristics conducive to a rapid and efficient Am/Cm chromatographic separation. Contact of nitric acid with NaBiO 3 was shown to significantly decrease the nitric acid concentration and solution volume. The adsorption, kinetic, and chromatographic behavior of Am and Cm in systems that disperse NaBiO3 in filter aids was evaluated. Further, dispersion of NaBiO 3 increased separation factors to over 100, with rapid kinetics achieved within 1 min of contact and sustained for at least 2 h. The adsorption capacity was more than doubled from 0.066 mequiv g –1 for solid NaBiO 3 alone to 0.149(6) and 0.156(9) meq g –1 when dispersed in Celite 545 and silica gel, respectively. Complete separation was achieved in all systems with ~100% recovery in the respective eluted fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗