Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Incremental Computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Stress analysis method for clearance-fit joints with bearing-bypass loads

Within a multi-fastener joint, fastener holes may be subjected to the combined effects of bearing loads and loads that bypass the hole to be reacted elsewhere in the joint. The analysis of a joint subjected to search combined bearing and bypass loads is complicated by the usual clearance between the hole and the fastener. A simple analysis method for such clearance-fit joints subjected to bearing-bypass loading has been developed in the present study. It uses an inverse formulation with a linear elastic finite-element analysis. Conditions along the bolt-hole contact arc are specified by displacement constraint equations. The present method is simple to apply and can be implemented with most general purpose finite-element programs since it does not use complicated iterative-incremental procedures. The method was used to study the effects of bearing-bypass loading on bolt-hole contact angles and local stresses. In this study, a rigid, frictionless bolt was used with a plate having the properties of a quasi-isotropic graphite/epoxy laminate. Results showed that the contact angle as well as the peak stresses around the hole and their locations were strongly influenced by the ratio of bearing and bypass loads. For single contact, tension and compression bearing-bypass loading had opposite effects on the contact angle. For some compressive bearing-bypass loads, the hole tended to close on the fastener leading to dual contact. It was shown that dual contact reduces the stress concentration at the fastener and would, therefore, increase joint strength in compression. The results illustrate the general importance of accounting for bolt-hole clearance and contact to accurately compute local bolt-hole stresses for combined bearings and bypass loading.

Naik, R. A.↗
DOE OSTI2022

MPAS-Seaice (v1.0.0): sea-ice dynamics on unstructured Voronoi meshes

Abstract. We present MPAS-Seaice, a sea-ice model which uses the Model for Prediction Across Scales (MPAS) framework and spherical centroidal Voronoi tessellation (SCVT) unstructured meshes. As well as SCVT meshes, MPAS-Seaice can run on the traditional quadrilateral grids used by sea-ice models such as CICE. The MPAS-Seaice velocity solver uses the elastic–viscous–plastic (EVP) rheology and the variational discretization of the internal stress divergence operator used by CICE, but adapted for the polygonal cells of MPAS meshes, or alternatively an integral (“finite-volume”) formulation of the stress divergence operator. An incremental remapping advection scheme is used for mass and tracer transport. We validate these formulations with idealized test cases, both planar and on the sphere. The variational scheme displays lower errors than the finite-volume formulation for the strain rate operator but higher errors for the stress divergence operator. The variational stress divergence operator displays increased errors around the pentagonal cells of a quasi-uniform mesh, which is ameliorated with an alternate formulation for the operator. MPAS-Seaice shares the sophisticated column physics and biogeochemistry of CICE and when used with quadrilateral meshes can reproduce the results of CICE. We have used global simulations with realistic forcing to validate MPAS-Seaice against similar simulations with CICE and against observations. We find very similar results compared to CICE, with differences explained by minor differences in implementation such as with interpolation between the primary and dual meshes at coastlines. We have assessed the computational performance of the model, which, because it is unstructured, runs with 70 % of the throughput of CICE for a comparison quadrilateral simulation. The SCVT meshes used by MPAS-Seaice allow removal of equatorial model cells and flexibility in domain decomposition, improving model performance. MPAS-Seaice is the current sea-ice component of the Energy Exascale Earth System Model (E3SM).

58 GEOSCIENCES↗
NASA NTRS1994

The interpretation of remotely sensed cloud properties from a model paramterization perspective

A study has been made of the relationship between mean cloud radiative properties and cloud fraction in stratocumulus cloud systems. The analysis is of several Land Resources Satellite System (LANDSAT) images and three hourly International Satellite Cloud Climatology Project (ISCCP) C-1 data during daylight hours for two grid boxes covering an area typical of a general circulation model (GCM) grid increment. Cloud properties were inferred from the LANDSAT images using two thresholds and several pixel resolutions ranging from roughly 0.0625 km to 8 km. At the finest resolution, the analysis shows that mean cloud optical depth (or liquid water path) increases somewhat with increasing cloud fraction up to 20% cloud coverage. More striking, however, is the lack of correlation between the two quantities for cloud fractions between roughly 0.2 and 0.8. When the scene is essentially overcast, the mean cloud optical tends to be higher. Coarse resolution LANDSAT analysis and the ISCCP 8-km data show lack of correlation between mean cloud optical depth and cloud fraction for coverage less than about 90%. This study shows that there is perhaps a local mean liquid water path (LWP) associated with partly cloudy areas of stratocumulus clouds. A method has been suggested to use this property to construct the cloud fraction paramterization in a GCM when the model computes a grid-box-mean LWP.

HARSHVARDHAN↗
NASA NTRS2018

File Specification for M2AMIP Products: Version Number - 1.0

The Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) is an atmospheric reanalysis computed with the Goddard Earth Observing (EOS) System, Version 5.12.4 (GEOS) data assimilation system (Gelaro et al., 2017). To supplement the reanalysis, the GEOS General Circulation Model (GCM) used in MERRA-2 has been used to generate a 10-member ensemble of simulations, configured following the convention of the Atmospheric Model Intercomparison Project (AMIP; Gates et al., 1992). Each ensemble member was initialized using meteorological fields from a different date in November 1979. The AMIP simulations used the sea-surface temperature (SST) and sea-ice boundary conditions that were used in MERRA-2 (Bosilovich et al., 2016). This 10-member ensemble of AMIP simulations, denoted M2AMIP, is available for download in a group of self-describing files, which are documented in this office note. All data collections are provided on the same horizontal grid as MERRA-2. This grid has 576 points in the longitudinal direction and 361 points in the latitudinal direction, corresponding to a resolution of 0.625 degrees by 0.5 degrees. Although data collections are available at this grid, all fields are computed on a cubed-sphere grid with an approximate resolution of 50 km by 50 km and are then spatially interpolated to the latitude-longitude grid. There are no changes in the vertical grids used: variables are provided on either the native vertical grid of 72 model layers, or interpolated to 42 standard pressure levels. Unlike MERRA, no data collections are available at the vertical layer edges. More details on the grid are provided in Section 4. MERRA-2 introduced observation-based precipitation forcing for the land surface parameterization and the corresponding variable PRECTOTCORR in the MERRA-2 FLX (surface turbulent fluxes and related quantities) and LFO (land-surface forcing) collections (see Section 6; Reichle et al., 2017). While this variable is still available for M2AMIP, there was no observation-based forcing, making the value identical to the model derived precipitation, PRECTOT. Similarly, without data assimilation, the values for the analysis increments, D*DTANA, in the tendency and vertically integrated file collections are zero. The M2AMIP data are available for download online through the NASA Center for Climate Simulation (NCCS) DataPortal (https://portal.nccs.nasa.gov/datashare/gmao_m2amip/). Data are arranged in subdirectories based on ensemble member, followed by year and month. Control files that are compatible with the Grid Analysis and Display System (GrADS) are available in the ctl_daily and ctl_monthly directories for the hourly, three hourly, and monthly mean data. Control files for the monthly mean diurnal cycle can be found in the ctl_diurnal subdirectory within the directory for each individual ensemble member.

M2AMIP↗
NASA NTRS1996

New Theoretical Technique Developed for Predicting the Stability of Alloys

When alloys are being designed for aeronautical and other applications, a substantial experimental effort is necessary to make incremental changes in the desired alloy properties. A scheme to narrow the field to the most promising candidates would substantially reduce the high cost of this experimental screening. Such a method for determining alloy properties, called the BFS (Bozzolo, Ferrante, and Smith) method, has been developed at the NASA Lewis Research Center. This method was used to calculate the thermal stability and mechanical strength of 200 alloys of Ni3Al, with Cu and Au impurities forming ternary and quaternary compounds. With recent advances in the method, almost any metallic impurity and crystal structure can be addressed. In addition, thermal effects can be addressed with Monte Carlo techniques. At present, an experimental program is in progress to verify these results. The method identified a small number of the most promising candidates from the 200 alloys with the largest negative heat of formation and the highest bulk modulus. This calculation required only 5 min of CPU time on a VAX computer. It is clear that semi-empirical methods have achieved the level of development and reliability to warrant examining this new approach to the problem of alloy design. The present work was meant to demonstrate, perhaps in a rather simple way, this power. This type of application of atomistic simulation methods can narrow the gap and improve the feedback between theoretical predictions and laboratory experimentation.

Source record↗
NASA NTRS1983

Intrinsic adaptive mesh techniques

An alternating direction adaptive grid movement code was developed and a thesis adaptive angular meshes was directed. The alternating direction code was also established on the NASA Langley computer system and is available for use there. In essence, grid points are moved on an abstract surface above physical space by means of alternating coordinate directions. The abstract surface is formed with the salient solution properties if they can be extracted by a priori physical reasoning; or otherwise, in the absence of such reasoning, by the use of error estimates in some chosen norm. Upon formulation, all important driving properties for adaptive purposes are consolidated into one object - the abstract surface. At a basic level, a uniform distribution of surface points is equivalent to gradient resolution. This arises from a projection back down into physical space. At a higher level, a more accurate view of the abstract surface is obtained when changes in surface direction are also resolved. The appropriate measure for direction changes is normal curvature. It is defined as the rate of change of surface tangent planes as a surface coordinate curve is transversed in uniform increments of arc length.

Eiseman, P. R.↗
NASA NTRSDate not supplied

Examination of L-Band Brightness Temperature Forecasts in the SMAP Level-4 Soil Moisture Analysis

The NASA Soil Moisture Active Passive (SMAP) mission [4] has been providing L-band (1.4 GHz) passive microwave brightness temperature (Tb) observations since April 2015. By assimilating the Tb observations into the NASA Catchment land surface model [5] using a spatially distributed ensemble Kalman filter, the NASA Global Modeling and Assimilation Office generates the SMAP Level-4 Soil Moisture (L4_SM) product, which provides global, 3-hourly, 9-km resolution estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture with ~2.5-day latency for use in research and applications [6]. The L4_SM product also includes estimates of soil temperature, land surface fluxes, and assimilation diagnostics such as the model forecast and observed Tb values [7]. The output from the L4_SM system is routinely monitored by the L4_SM team. Such monitoring provides valuable information; instances of unusually large Tb observation-minus-forecast (O-F) residuals can indicate events during which soil moisture conditions are poorly described in the land modeling system [7,8]. For example, repeated occurrences of very large Tb O-F values in central Australia were traced back to deficiencies in the gauge-based precipitation product used in the land modeling system through L4_SM Version 5; this discovery prompted the use, beginning in Version 6, of satellite- and gauge-based precipitation observations outside of North America [9]. Recently, a statistical analysis of the Tb O-F residuals revealed systematic errors in the “tau-omega” L-band radiative transfer model that converts the land-model simulated soil moisture and temperature into the forecast Tb prior to the L4_SM analysis. The L4_SM analysis is built on the ensemble Kalman filter and assumes unbiased forecast errors. The presence of systematic Tb forecast errors could thus adversely impact the quality of the analyzed soil moisture. In this paper, we examine the Tb O-F residuals of the latest Version 7 L4_SM data (Science Version ID Vv7030 and Vv7032) [10,11,12]. In the L4_SM Version 7 algorithm, key parameters of the L-band radiative transfer model, including soil roughness, scattering albedo, and a (seasonally varying) climatology of vegetation opacity, are obtained from the SMAP Level-2 Radiometer retrieval product (Version 5) [1]. Additionally, we also use ground measurements of surface soil moisture and soil temperature from the SMAP core validation sites as in situ reference of soil conditions [2,3]. As part of the L4_SM system calibration, the seasonally-varying bias between the model forecast Tb and the observed values is removed prior to the assimilation of the SMAP Tb observations [7]. That is, the L4_SM system is designed to only correct errors in synoptic-scale and interannual variations from the long-term mean seasonal cycle while maintaining the model’s (potentially erroneous) climatology. The Tb O-F residuals examined here are thus computed using SMAP Tb observations after they are rescaled to the mean seasonal cycle of Tb from the modeling system without SMAP data assimilation. Consequently, the long-term average of the Tb O-F residuals has a global mean of only 0.13 K and locally small values, ranging from -1 to 3 K. Despite the small time-average values of the Tb O-F residuals, the model forecast Tb was nevertheless found to exhibit undesirable systematic errors. At some locations, the time-average Tb O-F values strongly depend on surface soil moisture (SM). At the Yanco SMAP core validation site, for example, the Tb O-F residuals typically range from 5 to 15 K under dry soil moisture conditions (SM < 0.15 m3 m-3) yet are predominantly negative under wet soil moisture conditions (SM > 0.25 m3 m-3), with values ranging from 0 to -40 K. This results in soil moisture analysis increments that persistently make the soil drier under dry SM conditions and persistently make the soil wetter under wet SM conditions, suggesting an error in the dynamic range of the simulated Tb, soil moisture or soil temperature. In this paper, we describe the higher-order systematic Tb forecast errors in more detail, examine their impact on the L4_SM product quality, and explore potential avenues to further improve the L4_SM algorithm.

Rolf Reichle↗
DOE OSTI2024

A Kaczmarz-inspired approach to accelerate the optimization of neural network wavefunctions

Neural network wavefunctions optimized using the variational Monte Carlo method have been shown to produce highly accurate results for the electronic structure of atoms and small molecules, but the high cost of optimizing such wavefunctions prevents their application to larger systems. We propose the Subsampled Projected-Increment Natural Gradient Descent (SPRING) optimizer to reduce this bottleneck. SPRING combines ideas from the recently introduced minimum-step stochastic reconfiguration optimizer (MinSR) and the classical randomized Kaczmarz method for solving linear least-squares problems. We demonstrate that SPRING outperforms both MinSR and the popular Kronecker-Factored Approximate Curvature method (KFAC) across a number of small atoms and molecules, given that the learning rates of all methods are optimally tuned. For example, on the oxygen atom, SPRING attains chemical accuracy after forty thousand training iterations, whereas both MinSR and KFAC fail to do so even after one hundred thousand iterations.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1988

PLANECHG: Earth orbit to lunar orbit delta V estimation program. User and technical documentation

The PLANECNG computer program calculates velocities for Earth-to-Mooon and Moon-to-Earth trajectories. The flight to be analyzed originates in a circular orbit of any inclination and altitude about one of the bodies, and culminates in a circular orbit of any inclination and altitude about the other body. An intermedate delta V and plane change occurs at the Lunar Sphere of Influence (SOI), the region where the vehicle is near its lowest velocity in the trajectory, and therefore where it is able to make the plane change with the lowest delta V. A given flight may penetrate the SOI at a number of points. Each point has associated with it a unique set of delta V's and total velocity. The program displays the velocities, in matrix form, for a representative set of SOI penetration points. An SOI point is identified by projecting Lunar latitude and longitude onto the SOI. The points recorded for a given flight are defined by the user, who provides a starting longitude and latitude, and an increment for each. A matrix is built with 10 longitudes forming the columns and 19 latitudes forming the rows. This matrix is presented in six reports, each containing different velocity or node information in the body of the matrix.

Source record↗
DOE OSTI2025

Build-To-Replace Strategy to Reduce O&M Costs of Advanced Reactors

This paper targets the goal of reducing fixed operations and maintenance (O&M) costs to $2/MWh for advanced reactor (AR) designs, an order of magnitude reduction from current nuclear fleets. Such goal will be severely constrained if the underlying assumptions of O&M approaches and practices are not questioned and reexamined, especially today when changes can be implemented effectively and efficiently. Achieving a 90% reduction in AR O&M costs requires a completely new way of thinking – a paradigm shift – not through incremental, technology-focused approaches alone. Here, we address this challenge by evaluating the impact of moving to shorter design life for major structures, systems and components (SSCs) and shorter, more predictable refurbishment cycles as modeled by the commercial airline industry. This paper provides a brief overview of this different mindset to O&M applied to ARs: the build-to-replace approach. We provide a direct example of analysis of a build-to-replace scenario by identifying and evaluating scenarios for reduced system and component lifetimes and associated replacement and refurbishment schedules to evaluate impacts on O&M costs and other lifecycle elements such as SSC reliability.

97 - MATHEMATICS AND COMPUTING↗
NASA NTRS1992

Planning for the semiconductor manufacturer of the future

Texas Instruments (TI) is currently contracted by the Air Force Wright Laboratory and the Defense Advanced Research Projects Agency (DARPA) to develop the next generation flexible semiconductor wafer fabrication system called Microelectronics Manufacturing Science & Technology (MMST). Several revolutionary concepts are being pioneered on MMST, including the following: new single-wafer rapid thermal processes, in-situ sensors, cluster equipment, and advanced Computer Integrated Manufacturing (CIM) software. The objective of the project is to develop a manufacturing system capable of achieving an order of magnitude improvement in almost all aspects of wafer fabrication. TI was awarded the contract in Oct., 1988, and will complete development with a fabrication facility demonstration in April, 1993. An important part of MMST is development of the CIM environment responsible for coordinating all parts of the system. The CIM architecture being developed is based on a distributed object oriented framework made of several cooperating subsystems. The software subsystems include the following: process control for dynamic control of factory processes; modular processing system for controlling the processing equipment; generic equipment model which provides an interface between processing equipment and the rest of the factory; specification system which maintains factory documents and product specifications; simulator for modelling the factory for analysis purposes; scheduler for scheduling work on the factory floor; and the planner for planning and monitoring of orders within the factory. This paper first outlines the division of responsibility between the planner, scheduler, and simulator subsystems. It then describes the approach to incremental planning and the way in which uncertainty is modelled within the plan representation. Finally, current status and initial results are described.

Fargher, Hugh E.↗
NASA NTRSDate not supplied

FUN3D Analyses in Support of the 1st AIAA Stability and Control Prediction Workshop

The 1st AIAA Stability and Control Prediction Workshop was created to establish best practices for the prediction of stability & control derivatives using computational fluid dynamics and assess the limitations of these computational methods when those best practices are applied. The inaugural workshop considers the ONERA version of the NASA/Boeing Common Research Model(CRM), which includes the wing, body, horizontal tail, and a vertical tail designed by ONERA. Wind tunnel tests have been conducted for this configuration with longitudinal tests having been previously published, in addition to unpublished data at small sideslip angles that will serve as ‘blind’ data for workshop data comparisons. Participants were provided a ‘family’ of unstructured grids for the full-span ONERA CRM model with the wind-tunnel sting included. This family of mixed-element grids consists of 5 levels of refinement (tiny, coarse, medium, fine, and extra fine) with surface and volume mesh scaling, resulting in a size range of 14.6 to 53.4 million nodes. In addition, a medium refinement mesh has been provided for the ONERA CRM configuration without a sting to evaluate the sting’s impact on static longitudinal stability characteristics. In addition to these workshop-provided grids, the present work also considers an equivalent ‘family’ of computational grids generated using Heldenmesh™, a rapid grid generation software by Helden Aerospace Corporation for creating high-quality, three-dimensional, mixed-element unstructured meshes. Because of the authors’ familiarity with this software, these additional grids were generated as a comparison to the workshop-provided grids and to better understand the implications of using volume-mirrored grids for stability and control predictions. The present work will contribute to the workshop with test case data generated using the NASA FUN3D code, a parallelized, unstructured, node-based, finite-volume discretization, Reynolds-averaged Navier-Stokes flow solver. Numerical simulations will be conducted using the Quadratic Constitutive Relationship (QCR) version of the Spalart-Allmaras (SA) turbulence model with negative turbulence variable provisions. Both steady and2nd-order, time-accurate simulation results are to be generated and compared for select test cases, as time permits, to investigate their impact on FUN3D predictions. The present work will consider the three primary workshop test cases: (1) grid convergence study, (2) Mach number effect on static stability, and (3) wind tunnel sting increments. Additionally, data will be provided for the two optional test cases, which include:(1) static stability derivative calculations and (2)sideslip angle sweeps. In each of the test cases, the vehicle is stationary, and the body is assumed to be rigid, where vehicle deformation has been accounted for in the model configuration geometry. For all test cases, longitudinal and lateral force and moment aerodynamic coefficients will be provided for the total configuration, in addition to a component-level breakdown that includes the port wing, starboard wing, fuselage, and tail.

CFD↗
NASA NTRS1995

Radiative transfer in a clumpy universe: The colors of high-redshift galaxies

We assess the effects of the stochastic attenuation produced by intervening QSO absorption systems on the broadband colors of galaxies at cosmological distances. We compute the H I opacity of a clumpy universe as a function of redshift, including scattering in resonant lines, such as Lyman alpha, Lyman beta, Lyman gamma, and higher order members, and Lyman-continuum absorption. Both the numerous, optically thin Lyman-alpha forest clouds and the rarer, optically thick Lyman limit systems are found to contribute to the obscuration of background sources. We study the mean properties of primeval galaxies at high redshift in four broad optical passbands, U(sub n), B, G, and R. Even if young galaxies radiated a significant amount of ionizing photons, the attenuation due to the accumulated photoelectric opacity along the path is so severe that sources beyond z approximately 3 will drop out of the U(sub n) image together. We also show that the observed B-R color of distant galaxies can be much redder than expected from a stellar population. At z approximately 3.5, the blanketing by discrete absorption lines in the Lyman series is so effective that background galaxies appear, on average, 1 mag fainter in B. By z approximately 4, the observed B magnitude increment due to intergalactic absorption exceeds 2 mag. By modeling the intrinsic UV spectral energy distribution of star-forming galaxies with a stellar population synthesis code, we show that the (B-R)(sub AB) approximately 0 criterion for identifying 'flat-spectrum,' metal-producing galaxies is biased against objects at z greater than 3. The continuum blanketing from the Lyman series produces a characteristic staircase profile in the transmitted power. We suggest that this cosmic Lyman decrement might be used as a tool to identify high-z galaxies.

Madau, Piero↗
DOE OSTI2024

Optimization-based, property-preserving algorithm for passive tracer transport

Here we present a new optimization-based property-preserving algorithm for passive tracer transport. The algorithm utilizes a semi-Lagrangian approach based on incremental remapping of the mass and the total tracer. However, unlike traditional semi-Lagrangian schemes, which remap the density and the tracer mixing ratio through monotone reconstruction or flux correction, we utilize an optimization-based remapping that enforces conservation and local bounds as optimization constraints. In so doing we separate accuracy considerations from preservation of physical properties to obtain a conservative, second-order accurate transport scheme that also has a notion of optimality. Moreover, we prove that the optimization-based algorithm preserves linear relationships between tracer mixing ratios. We illustrate the properties of the new algorithm using a series of standard tracer transport test problems in a plane and on a sphere.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1999

An Efficient Objective Analysis System for Parallel Computers

A new atmospheric objective analysis system designed for parallel computers will be described. The system can produce a global analysis (on a 1 X 1 lat-lon grid with 18 levels of heights and winds and 10 levels of moisture) using 120,000 observations in 17 minutes on 32 CPUs (SGI Origin 2000). No special parallel code is needed (e.g. MPI or multitasking) and the 32 CPUs do not have to be on the same platform. The system is totally portable and can run on several different architectures at once. In addition, the system can easily scale up to 100 or more CPUS. This will allow for much higher resolution and significant increases in input data. The system scales linearly as the number of observations and the number of grid points. The cost overhead in going from 1 to 32 CPUs is 18%. In addition, the analysis results are identical regardless of the number of processors used. This system has all the characteristics of optimal interpolation, combining detailed instrument and first guess error statistics to produce the best estimate of the atmospheric state. Static tests with a 2 X 2.5 resolution version of this system showed it's analysis increments are comparable to the latest NASA operational system including maintenance of mass-wind balance. Results from several months of cycling test in the Goddard EOS Data Assimilation System (GEOS DAS) show this new analysis retains the same level of agreement between the first guess and observations (O-F statistics) as the current operational system.

Stobie, J.↗
NASA NTRS1995

Image applications for coastal resource planning: Elkhorn Slough Pilot Project

The purpose of this project has been to evaluate the utility of digital spectral imagery at two levels of resolution for large scale, accurate, auto-classification of land cover along the Central California Coast. Although remote sensing technology offers obvious advantages over on-the-ground mapping, there are substantial trade-offs that must be made between resolving power and costs. Higher resolution images can theoretically be used to identify smaller habitat patches, but they usually require more scenes to cover a given area and processing these images is computationally intense requiring much more computer time and memory. Lower resolution images can cover much larger areas, are less costly to store, process, and manipulate, but due to their larger pixel size can lack the resolving power of the denser images. This lack of resolving power can be critical in regions such as the Central California Coast where important habitat change often occurs on a scale of 10 meters. Our approach has been to compare vegetation and habitat classification results from two aircraft-based spectral scenes covering the same study area but at different levels of resolution with a previously produced ground-truthed land cover base map of the area. Both of the spectral images used for this project were of significantly higher resolution than the satellite-based LandSat scenes used in the C-CAP program. The lower reaches of the Elkhorn Slough watershed was chosen as an ideal study site because it encompasses a suite of important vegetation types and habitat loss processes characteristic of the central coast region. Dramatic habitat alterations have and are occurring within the Elkhorn Slough drainage area, including erosion and sedimentation, land use conversion, wetland loss, and incremental loss due to development and encroachnnent by agriculture. Additonally, much attention has already been focused on the Elkhorn Slough due to its status as a National Marine Education and Research Reserve and as part of the Monterey Bay National Marine Sanctuary. These destinations have resulted in a rich collection of prior spatial and temporal habitat data.

Kvitek, Rikk G.↗
DOE OSTI2026

Reconstruction of Six-Dimensional Phase Space

A phase space is a mathematical representation of all possible physical states of a system. Particle beams at Fermilab exist within a six-dimensional (6D) phase space defined by three positional components, (x, y, z) and three momentum components, (px, py, pz). To reconstruct this space implies taking measurement data from detectors and mapping out particle behavior using computational methods. The beam detectors, however, are only able to detect spatial distribution among the events of the beam, therefore being limited to positional data. Also, due to the vast number of events in a particle beam, it is extremely difficult to analyze and differentiate every single one’s behavior. However, with Machine Learning (ML), which can distinguish between patterns and map out particle behavior more efficiently. We first used the particle beam software, G4beamline, to simulate a 10,000-event muon beam, adjusting parameters such as initial momentum magnitude (p¬0) and virtual detector position. Using ten virtual detectors, we analyzed p0 values such that minimum 9,990 events were analyzed by every detector. We then input the data from these beam simulations to a C++ program, that randomly selects 100 events, and creates a 2D histogram based on spatial distribution, detector position, and event intensity. This process is repeated 100 times to create 100 histograms per p0 value. These images were then input to a modified ResNet18 Convolutional Neural Network (CNN) for training, and to predict p0 from some unseen set of histograms. The model was accurate when trained on momentum increments of 5 MeV/c and provided with denser training samples around highly variable test values. These results displayed machine learning being able to accurately predict p0 from being trained on different particle behaviors.

Shirlee, Jermain [Fermilab]↗