Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Impact Assessment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Identification of Best Practices for Predicting Inlet Performance Using FUN3D Part 2: Installed Inlets.

A series of studies were performed to assess the impacts of boundary condition type and placement, grid refinement, and modeling parameters such as turbulence model and flux limiter on the predicted inlet performance for installed inlet configurations using the FUN3D flow solver. Two configurations were considered for the study; a wall-mounted Boundary Layer Ingestion (BLI) inlet and the C607 propulsion model tested in the 8x6 Supersonic Wind Tunnel at the NASA Glenn Research Center. The results of the studies were to be used to recommend best practices, as well as to assess the accuracy of FUN3D for inlet predictions. The results of BLI inlet stud-ies showed a minimal impact of grid refinement on the predicted inlet performance for a constant mass flow rate through the inlet. For the C607 propulsion model, the results showed that while the FUN3D predictions at the Aerodynamic Inter-face Plane (AIP) qualitatively agree with the experimental data, FUN3D showed a tendency to overpredict the circumferential distortion metric (IDCmax) and un-derpredict both the radial distortion metric (IDRmax) and the pressure recovery at the AIP (PRAIP ), with the differences between FUN3D and the experimental data increasing with increasing grid refinement and Mach number. Additionally, the outflow boundary location studies performed for both geometries showed that the solution at the AIP was not significantly impacted by the outflow boundary location as long as it was not placed at the location of the AIP. The modeling parameter studies did not indicate a path forward for improved predictions for either inlet con-figuration. Finally, comparisons between the mass flow plug and outflow geometry versions of the C607 propulsion model illustrated favorable agreement, which indi-cates that the differences observed are not caused by the outflow boundary model for this problem. This problem poses significant challenges to Reynolds-averaged Navier-Stokes (RANS) solvers due to the presence of shocks and flow separation in the inlet.

FUN3D↗
NASA NTRSDate not supplied

Understanding and Utilizing PBL Height Data from Multiple Observing Systems in the GEOS System

The accuracy of PBL height simulation is a key issue in many applications including forecasting near surface meteorology and air quality, however, it is a very challenging problem due to the lack of not only comprehensive, global Planetary Boundary Layer (PBL) observations but also a strategy and infrastructure to utilize PBL height data from a variety of sensors. Following the designation of PBL as an incubation class observable in the 2017 Decadal Survey, the PBL Incubation Study Team Report [14] made clear that “a future global PBL observing system requires modeling and data assimilation as essential components.” There is an urgent need for global modeling development in order to utilize Program of Record (POR) observations, assess their impacts, and identify gaps to be filled by future PBL missions. Our overall objective is to develop PBL data assimilation capabilities in the NASA Global Earth Observing System (GEOS), focusing on PBL height from multiple observing systems, to support the assessment and use of future PBL observations. The NASA GEOS system is composed of the GEOS global atmospheric general circulation model (AGCM) and the atmospheric data assimilation system (ADAS). The PBL parameterizations include the “Lock” K-profile scheme driven by surface and cloud-top buoyancy fluxes ([4]), and the “Louis” local scheme for stable conditions based on the Richardson number ([5]). Above the mixed layer defined by the Lock surface plume, shallow cumulus convection is represented by the mass flux scheme of [9]. Additional parameterizations are summarized in [1]. The ADAS employs the hybrid 4D Ensemble- Variational (EnVar) configuration ([15]), with the ensemble providing flow-dependent background error covariance information. The resultant analysis increments are fed back to the forecast model through the 4D incremental analysis update (IAU) approach ([11]). In this study, PBL height data are being or have been generated from radiosondes, GNSS RO, satellite (CATS, CALIPSO and ICESat-2) and ground-based (MPLNET) lidars, and wind profiler. Investigations have been conducted to specify quality marks for PBL height retrievals for the data assimilation purpose. These PBL height data have different strengths and weaknesses ([2], [3], [6], [7], [8], [10]), and the satellite PBL height data provide better global coverage and complement in-situ PBL height data. Radiosondes offer high accuracy and in situ measurement of temperature and humidity profiles, but with poor spatio-temporal sampling. The in-situ observing systems like MPLNET and wind profiler provide long history of PBL height records at each station. The GNSS RO based PBL height is retrieved based on the sharp gradients in refractivity profile that represent the fine vertical structure of temperature and moisture changes above the PBL. However, not all RO refractivity profiles reach the surface depending on location and regime, and RO refractivity retrievals can be negatively biased below 2km. The PBL height data from satellite lidars provide high resolution along track PBL height retrievals, but over land they are affected by previous day convective PBL aerosol and strongly associated with mixing layer and retrievals cannot be made below thick, attenuating clouds. A successful assimilation of PBL height data requires a thorough understanding of the observing method and the retrieval algorithm for each observing system in order to use the PBL height data from multiple observing systems properly. Due to the sensitivity of PBL height data to the observing method and choice of algorithm, it is important to use a model definition appropriate for each observation type to compute differences between PBL height data and model PBL height (OmFs). The GEOS model currently includes two PBL height definitions suitable for direct comparison with observed PBL height, and additional definitions are being added in this study. Evaluation of different model PBL height definitions is underway. Meanwhile, efforts have been made in the GEOS data assimilation system to develop PBL height data assimilation capability. PBL height data can be assimilated using two different approaches. The traditional approach is to construct an observation operator and its tangent linear and adjoint, which link control variables to PBL height data from each observing system. This observation operator can be very complicated, e.g., the lidar-based PBL height observation operator includes the backscatter lidar forward observation operator, the algorithm to derive PBL height from attenuated total backscatter, interpolation, and calculations handling the mismatch between observed and model scales. The other approach is to augment PBL height to the control variable vector, and it is adopted in this study. The latter approach was also used in previous studies, e.g., the assimilation of PBL height data from radiosonde and aircraft in the Real Time Mesoscale Analysis (RTMA) system for a dispersion modelling study ([13]); the PBL height assimilation study using lidar PBL height data at Greensburg, Kansas for a field campaign ([12]). The PBL height assimilation from multiple observing systems in this study allows us to take advantage of the diverse PBL height data that provide much better global coverage collectively under different meteorological conditions and with different temporal and spatial scales. As all the PBL heights are tightly coupled with the PBL thermodynamic variables, the strong correlations, which are provided by the 4D ensemble forecast, enable PBL height data from various sources to interact and combine coherently and provide additional information for PBL temperature and moisture fields. The results of comparisons among PBL height data from different sources and the evaluation of the model PBL height definitions with the PBL height data will be presented, and the PBL height data synergy strategies and preliminary results will also be discussed at the conference.

Y. Zhu↗
NASA NTRS2016

Model Development for MODIS Thermal Band Electronic Crosstalk

MODerate-resolution Imaging Spectroradiometer (MODIS) has 36 bands. Among them, 16 thermal emissive bands covering a wavelength range from 3.8 to 14.4 m. After 16 years on-orbit operation, the electronic crosstalk of a few Terra MODIS thermal emissive bands developed substantial issues that cause biases in the EV brightness temperature measurements and surface feature contamination. The crosstalk effects on band 27 with center wavelength at 6.7 m and band 29 at 8.5 m increased significantly in recent years, affecting downstream products such as water vapor and cloud mask. The crosstalk effect is evident in the near-monthly scheduled lunar measurements, from which the crosstalk coefficients can be derived. The development of an alternative approach is very helpful for independent verification.In this work, a physical model was developed to assess the crosstalk impact on calibration as well as in Earth view brightness temperature retrieval. This model was applied to Terra MODIS band 29 empirically to correct the Earth brightness temperature measurements. In the model development, the detectors nonlinear response is considered. The impact of the electronic crosstalk is assessed in two steps. The first step consists of determining the impact on calibration using the on-board blackbody (BB). Due to the detectors nonlinear response and large background signal, both linear and nonlinear coefficients are affected by the crosstalk from sending bands. The second step is to calculate the effects on the Earth view brightness temperature retrieval. The effects include those from affected calibration coefficients and the contamination of Earth view measurements. This model links the measurement bias with crosstalk coefficients, detector non-linearity, and the ratio of Earth measurements between the sending and receiving bands. The correction of the electronic cross talk can be implemented empirically from the processed bias at different brightness temperature. The implementation can be done through two approaches. As routine calibration assessment for thermal infrared bands, the trending over select Earth scenes is processed for all the detectors in a band and the band averaged bias is derived at a certain time. In this case, the correction of an affected band can be made using the regression of the model with band averaged bias and then corrections of detector differences are applied. The second approach requires the trending for individual detectors and the bias for each detector is used for regression with the model. A test using the first approach was made for Terra MODIS band 29 with the biases derived from long-term trending of brightness temperature over ocean and Dome-C.

Chang, Tiejun↗
NASA NTRS2009

An Impact Sensor System for the Characterization of the Micrometeoroid and Lunar Secondary Ejecta Environment

The Impact Sensor for Micrometeoroid and Lunar Secondary Ejecta (IMMUSE) project aims to apply and integrate previously demonstrated impact sensing subsystems to characterize the micrometeoroid and lunar secondary (MMSE) environment on the surface of the Moon. Once deployed, data returned from IMMUSE will benefit: (1) Fundamental Lunar Science: providing data to improve the understanding of lunar cratering processes and dynamics of the lunar regolith. (2) Lunar Exploration Applied Science: providing an accurate MMSE environment definition for reliable impact risk assessments, cost-effective shielding designs, and mitigation measures for long-term lunar exploration activities. (3) Planetary Science: providing micrometeoroid data to aid the understanding of asteroidal collisions and the evolution of comets. A well-established link between micrometeoroid impacts and lunar regolith is also key to understanding other regolith-covered bodies from remote-sensing data. The IMMUSE system includes two components: (1) a large area (greater than or equal to 1 m2) micrometeoroid detector based on acoustic impact and fiber optic displacement sensors and (2) a 100 cm2 lunar secondary ejecta detector consisting of dual-layer laser curtain and acoustic impact sensors. The combinations of different detection mechanisms will allow for a better characterization of the MMSE environment, including flux, particle size/mass, and impact velocity. IMMUSE is funded by the NASA LASER Program through 2012. The project fs goal is to reach a Technical Readiness Level of 4 in preparation for a more advanced development beyond 2012. Several prototype subsystems have been constructed and subjected to low impact and hypervelocity impact tests. The presentation will include a status review and preliminary test results.

Liou, J.-C.↗
NASA NTRSDate not supplied

Delaware Basin Ecological Forecasting: Identifying Vegetation Trends and Atmospheric Stressors in the Guadalupe Mountains and Carlsbad Caverns National Parks

The Guadalupe Mountains and Carlsbad Caverns National Parks, located in the Delaware Basin in the southwestern United States, observed both a decrease in precipitation and an increase in temperature over the last decade. Furthermore, activity from local oil fields generated nitrogen dioxide (NO2) plumes that spread over the parks and augmented the effects of the drought. NO2 is a precursor for tropospheric ozone (O3) which is known to have adverse effects on vegetation and ecosystems at large. These new climate dynamics prompted the National Park Service (NPS) to collaborate with NASA DEVELOP to assess the impact on vegetation within the parks. We used NASA Earth observations including Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper (ETM+), Landsat 8 Operational Land Imager (OLI), and Global Precipitation Measurement Integrated Multi-Satellite Retrievals (GPM IMERG) to assess vegetation health, water stress, and precipitation in the affected parks. After creating a homogenous reference area in the Sierra Diablo Mountains (SDM), the team visualized vegetation health through a Normalized Difference Vegetation Index (NDVI) time series map from 2010-2021. This did not show strong evidence that the NO2 plume is causing vegetation decline. Following this, we created a water stress map with a Normalized Difference Moisture Index (NDMI) time series map from 2010-2021, which revealed a pattern of increasing water stress. We also confirmed that precipitation in the region decreased over the span of 2010-2021. These observations and findings will allow the NPS Intermountain Region to more effectively plan for the preservation and maintenance of vegetation health within the parks.

Jack Mezger↗
NASA NTRS2022

Delaware Basin Ecological Forecasting: Identifying Vegetation Trends and Atmospheric Stressors in the Guadalupe Mountains and Carlsbad Caverns National Parks

The Guadalupe Mountains and Carlsbad Caverns National Parks, located in the Delaware Basin in the southwestern United States, observed both a decrease in precipitation and an increase in temperature over the last decade. Furthermore, activity from local oil fields generated nitrogen dioxide (NO2) plumes that spread over the parks and augmented the effects of the drought. NO2 is a precursor for tropospheric ozone (O3) which is known to have adverse effects on vegetation and ecosystems at large. These new climate dynamics prompted the National Park Service (NPS) to collaborate with NASA DEVELOP to assess the impact on vegetation within the parks. We used NASA Earth observations including Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper (ETM+), Landsat 8 Operational Land Imager (OLI), and Global Precipitation Measurement Integrated Multi-Satellite Retrievals (GPM IMERG) to assess vegetation health, water stress, and precipitation in the affected parks. After creating a homogeneous reference area in the Sierra Diablo Mountains, the team visualized vegetation health through a Normalized Difference Vegetation Index (NDVI) time series map from 2010-2021. This did not show strong evidence that the NO2 plume is causing vegetation decline. Following this, we created a water stress map with a Normalized Difference Moisture Index (NDMI) time series map from 2010-2021, which revealed a pattern of increasing water stress. We also confirmed that precipitation in the region decreased over the span of 2010-2021. These observations and findings will allow the NPS Intermountain Region to more effectively plan for the preservation and maintenance of vegetation health within the parks.

Jack Mezger↗
NASA NTRS2022

Metrics for Flight Operations: Application to Europa Clipper Tour Selection

Objective measures are ubiquitous in the formulation, design and implementation of deep space missions. Tour durations, flyby altitudes, propellant budgets, power consumption, and other metrics are essential to developing and managing NASA missions. But beyond the simple metrics of cost and workforce, it has been difficult to identify objective, quantitative measures that assist in evaluating choices made during formulation or implementation phases in terms of their impact on flight operations. As part of the development of the Europa Clipper Mission system, a set of operations metrics have been defined along with the necessary design information and software tooling to calculate them. We have applied these methods and metrics to help assess the impact to the flight team on the six options for the Clipper Tour that are currently being vetted for selection in the fall of 2021. To generate these metrics, the Clipper MOS team first designed the set of essential processes by which flight operations will be conducted, using a standard approach and template to identify (among other aspects) timelines for each process, along with their time constraints (e.g., uplinks for sequence execution). Each of the resulting 50 processes is documented in a common format and concurred by stakeholders. Process timelines were converted into generic schedules and workforce-loaded using COTS scheduling software, based on the inputs of the process authors and domain experts. Custom code was generated to create an operations schedule for a specific portion of Clipper's prime mission, with instances of a given process scheduled based on specific timing rules (e.g., process X starts once per week on Thursdays) or relative to mission events (e.g., sequence generation process begins on a Monday, at least three weeks before each Europa closest approach). Over a 5-month period, and for each of six Clipper candidate tours, the result was a 20,000+ line, workforce-loaded schedule that documents all of the process-driven work effort at the level of individual roles, along with a significant portion of the level-of-effort work. Post-processing code calculated the absolute and relative number of work hours during a nominal 5 day / 40 hour work week, the work effort during 2nd and 3rd shift, as well as 1st shift on weekends. The resultant schedules and shift tables were used to generate objective measures that can be related to both human factors and to operational risk and showed that Clipper tours which utilize 6:1 resonant (21.25 day) orbits instead of 4:1 resonant (14.17 day) orbits during the first dozen or so Europa flybys are advantageous to flight operations. A similar approach can be extended to assist missions in more objective assessments of a number of mission issues and trades, including tour selection and spacecraft design for operability.

Sarrel, Marc↗
NASA NTRSDate not supplied

Global NWP Impacts of Infrared Sounders from Geostationary Orbit

The Geostationary eXtended Observations (GeoXO) program, expected to launch in the 2030s, includes a proposed infrared (IR) sounder that would provide persistent atmospheric profile observations over much of the western hemisphere. In preparation, the National Aeronautics and Space Administration (NASA) Global Modeling and Assimilation Office (GMAO) observing system simulation experiment (OSSE) framework was used to assess the impact of such an instrument on global numerical weather prediction (NWP) as part of a global “ring” of such instruments. Building on previous preliminary studies, an evaluation of the impact of geostationary IR sounders will be presented with foci on the analysis, forecasts, and the forecast sensitivity observation impact (FSOI) metric, including an examination of the consequences for tropical cyclone representation. Overall, assimilation of geostationary IR provide a beneficial impact for NWP applications.

Erica L. Mcgrath-spangler↗
NASA NTRS2012

Probability and Confidence Trade-space (PACT) Evaluation: Accounting for Uncertainty in Sparing Assessments

There are two general shortcomings to the current annual sparing assessment: 1. The vehicle functions are currently assessed according to confidence targets, which can be misleading- overly conservative or optimistic. 2. The current confidence levels are arbitrarily determined and do not account for epistemic uncertainty (lack of knowledge) in the ORU failure rate. There are two major categories of uncertainty that impact Sparing Assessment: (a) Aleatory Uncertainty: Natural variability in distribution of actual failures around an Mean Time Between Failure (MTBF) (b) Epistemic Uncertainty : Lack of knowledge about the true value of an Orbital Replacement Unit's (ORU) MTBF We propose an approach to revise confidence targets and account for both categories of uncertainty, an approach we call Probability and Confidence Trade-space (PACT) evaluation.

Anderson, Leif↗
NASA NTRS1993

The impact of U.S. continental outflow on ozone and aerosol distributions over the western Atlantic

Aircraft measurements of selected trace gas species, aerosols, and meteorological parameters were performed in the lower troposphere off the U.S. east coast during August and September 1989 as part of the NASA Global Tropospheric Experiment (GTE) Chemical Instrumentation Test and Evaluation (CITE 3) expedition. In this paper, we examine these data to assess the impact of continental outflow on western Atlantic O3 and small aerosol budgets. Results show that mixed layer (ML) O3 concentrations and small aerosol number densities (Np) were enhanced by factors of 3 and 6, respectively, within air masses of predominantly continental origin compared with clean maritime background air. These enhancements exhibited a marked altitude dependence, declining rapidly above the ML to the point where only slight to moderate differences in O3 and Np, respectively, were notable above 2.4 km. Within continentally influenced ML's, both O3 and Np were correlated with CO, exhibiting linear regression slopes averaging 0.4 ppbv (O3)/ppbv(CO) for O3 and 7.7 (particles/cc)/ppbv(CO) for Np and indicating a primarily anthropogenic origin for the observed enhancement of these species. Comparisons between profiles in continental and background maritime air masses suggest that photochemical production below 1.4-km altitude adds over 10% to western Atlantic tropospheric column O3 abundance in continental outflow regimes. For aerosols, eastward advection of low-level continental air contributes an average net flux of 2.8 metric tons of submicron (accumulation mode) particles per kilometer of shoreline per day to the western Atlantic troposphere.

Anderson, B. E.↗
NASA NTRS1979

MHD performance calculations with oxygen enrichment

The impact of oxygen enrichment of the combustion air on the generator and overall plant performance was studied for the ECAS-scale MHD/steam plants. A channel optimization technique is described and the results of generator performance calculations using this technique are presented. Performance maps were generated to assess the impact of various generator parameters. Directly and separately preheated plant performance with varying O2 enrichment was calculated. The optimal level of enrichment was a function of plant type and preheat temperature. The sensitivity of overall plant performance to critical channel assumptions and oxygen plant performance characteristics was also examined.

Pian, C. C. P.↗
NASA NTRS1986

Impact of the 1985 Space World Administrative Radio Conference on frequency/orbit planning and use

The 1985 World Administrative Radio Conference (WARC-ORB-85) was held to determine which space radio services should be planned and which planning methods should be used. The second session of this Conference (WARC-ORB-88) will meet to develop the required plans. This paper presents the results of WARC-ORB-85, assesses the impact of those decisions, and identifies the intersessional work to be conducted by administrations and the CCIR (Consultative Committee on International Radio). The major decisions of WARC-ORB-85 were: (1) the restriction of additional planning to the fixed satellite service at identified frequencies; and (2) the selection of a planning method consisting of two parts (a) an allotment plan, and (b) improved procedures. The paper also discusses WARC-ORB-85 decisions relative to the Region 2 broadcast satellite service plans at 12 GHz, feederlink planning for Regions 1 and 3 broadcast satellites at 12 GHz, and sound broadcast satellite service.

Miller, E. F.↗
NASA NTRS1986

Impact of the 1985 space World Administrative Radio Conference on frequency/orbit planning and use

The 1985 World Administrative Radio Conference (WARC-ORB-85) was held to determine which space radio services should be planned and which planning methods should be used. The second session of this Conference (WARC-ORB-88) will meet to develop the required plans. This paper presents the results of WARC-ORB-85, assesses the impact of those decisions, and identifies the intersessional work to be conducted by administrations and the CCIR (consultative Committee on International Radio). The major decisions of WARC-ORB-85 were: (1) the restriction of additional planning to the fixed satellite service at identified frequencies; and (2) the selection of a planning method consisting of two parts: (a) an allotment plan, and (b) improved procedures. The paper also discusses WARC-ORB-85 decisions relative to the Region 2 broadcast satellite service plans at 12 GHz, feederlink planning for Regions 1 and 3 broadcast satellites at 12 GHz, and sound broadcast satellite service.

Miller, E. F.↗
NASA NTRS1994

Direct Monitoring of Trace Atmospheric Species via Ion Trap Mass Spectrometry

There is an ever-increasing emphasis on the part of government agencies, academia, and industry on enhancing our understanding of atmospheric processes and assessing the impact of human activities on these processes. While issues such as the ozone hole and rising levels of greenhouse gases have received major attention. relatively little is known about the types, concentrations, sources, and sinks of hydrocarbons in the troposphere and stratosphere. Such information would be of tremendous utility in assessing the roles of various anthropogenic and biogenic processes on global carbon cycles. An ion trap mass spectrometer has been developed for monitoring trace levels of hydrocarbons in the atmosphere on NASA's DC-8 "flying laboratory". This aircraft is used to provide measurements in support of a number of "Mission to Planet Earth" activities and tropospheric chemistry experiments. In past missions, specific compounds have been monitored via highly specialized instrumentation, fast GO, or collection of whole air samples for subsequent ground-based analysis. The ion trap has several features. including small size. excellent sensitivity, and broad applicability, which make it highly atttrat:ive for atmospheric monitoring. The design of this instrument, its air sampling interface. and the various complications associated with aircraft-deployment will be described. Data showing the sensitivity of the instrument for detecting hydrocarbons at mixing ratios below one part-per-billion, and the use of MS/MS for direct, on-line, real-time monitoring will be presented.

Palmer, P. T.↗
NASA NTRSDate not supplied

Effect of Rain-Adjusted Satellite Sea Surface Salinity on ENSO Predictions from the GMAO S2S Forecast System

ENSO has a significant impact on climate variability throughout the world and so has been the key focus for improving coupled ocean-atmosphere forecasts. Assimilation of altimetry and in situ data lead to improved short-term forecasts of the coupled system. However, few studies have focused on improving the near-surface density/mixing through assimilation of satellite sea surface salinity (SSS). For expediency, most projects that do assimilate SSS do so as if these data were observed at the top model layer instead of at the surface. In rainy regions where buoyant water sits as a fresh lens at the surface, this assumption is likely invalid. Therefore, we adjust SSS so that it more accurately represents the salinity at the first model layer. The Rain Impact Model (RIM) uses a simple diffusion model to determine the near surface salinity gradient (i.e., 1 cm to 5 m). Satellite SSS data are modified using this near-surface salinity gradient, so the salinity values are now valid at the first model layer (we call this SSS@5m). We assess the impact of satellite SSS observations for near-surface dynamics within ocean reanalyses and how these impact dynamical ENSO forecasts using the NASA GMAO S2S coupled system. For all reanalysis experiments, all available along-track sea level and in situ observations are assimilated for 2011 to 2020 using the LETKF scheme (Penny et al., 2013). One reanalysis assimilates Aquarius /SMAP SSS as before. An additional reanalysis is performed assimilating the SSS@5m data. Validation statistics are compared for experiments that assimilate SSS (sub-optimally as before) versus the SSS@5m. We also compare results of coupled forecasts that are initialized from these reanalyses in spring. For all but the big La Niña in 2017, all NINO3.4 forecasts were improved by using the RIM. We will show that improved SSS estimates upgrades density and near-surface mixing leading to more accurate coupled air/sea interaction and better forecasts.

ENSO↗
NASA NTRS1997

Satellite Analysis of Ocean Biogeochemistry and Mesoscale Variability in the Sargasso Sea

The objective of this study was to analyze the impact of spatial variability on the time-series of biogeochemical measurements made at the U.S. JGOFS Bermuda Atlantic Time-series Study (BATS) site. Originally the study was planned to use SeaWiFS as well as AVHRR high-resolution data. Despite the SeaWiFS delays we were able to make progress on the following fronts: (1) Operational acquisition, processing, and archive of HRPT data from a ground station located in Bermuda; (2) Validation of AVHRR SST data using BATS time-series and spatial validation cruise CTD data; (3) Use of AVHRR sea surface temperature imagery and ancillary data to assess the impact of mesoscale spatial variability on P(CO2) and carbon flux in the Sargasso Sea; (4) Spatial and temporal extent of tropical cyclone induced surface modifications; and (5) Assessment of eddy variability using TOPEX/Poseidon data.

Siegel, D. A.↗
NASA NTRS1993

Recent SEL experiments and studies

The studies discussed in this paper are all examples of activities that are performed as part of the Software Engineering Laboratory's (SEL's) process improvement model. Using this model, the SEL starts by understanding the product and process, then assesses the impact of new technologies, and finally packages what was learned. The preliminary examination of maintenance effort, error, and change profiles to establish a maintenance baseline exemplifies understanding-phase activities. The ongoing testing study that is examining the effects of various testing approaches on process and product measures is an example of typical assessing efforts. Finally, the derivation of cost and schedule estimation models from locally driven factors such as reuse level, application type, and language is an example of experience packaging. In the SEL, no study is ever really completed. Studies will be repeated and iterated upon in the future as part of the ongoing software improvement process.

Pajerski, Rose↗
NASA NTRS2014

The Impact of the Assimilation of Hyperspectral Infrared Retrieved Profiles on Advanced Weather and Research Model Simulations of a Non-Convective Wind Event

Tropopause folds are identified by warm, dry, high-potential vorticity, ozone-rich air and are one explanation for damaging non-convective wind events. Could improved model representation of stratospheric air and associated tropopause folding improve non-convective wind forecasts and high wind warnings? The goal of this study is to assess the impact of assimilating Hyperspectral Infrared (IR) profiles on forecasting stratospheric air, tropopause folds, and associated non-convective winds: (1) AIRS: Atmospheric Infrared Sounder (2) IASI: Infrared Atmospheric Sounding Interferometer (3) CrIMSS: Cross-track Infrared and Microwave Sounding Suite

Brendt. Emily↗