Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Physical and Chemical Responses of Amidine-Containing Polymers in the Capture and Release of CO 2

Polymeric materials containing amidine motifs are of high interest due to their ability to reversibly capture and release CO 2 at ambient temperature. Here, in this study, we probe physical and chemical responses of styrene-based copolymers containing linear amidine motifs as functions of CO 2 and inert gas exposures and temperature. A copper-catalyzed azide–alkyne cycloaddition “click” reaction involving N′-propargyl-N,N-dimethylacetamidine is used to modify random copolymers, resulting in an array of linear amidine motifs along the chain backbone with the amount of CO 2 -active amidine controlled by the copolymer composition. Through thermogravimetric measurements, we demonstrate that the amidine-functionalized copolymers efficiently capture CO 2 upon exposure to a stream of CO 2 (at 27 °C) and release it at a slightly elevated temperature (50 °C) when exposed to an inert gas stream (N 2 ). In addition to displaying a maximum adsorption capacity of 22 wt % in the presence of pure CO 2 , the copolymers show composition-dependent direct air capture (DAC) behaviors. Small molecule analogs are used to definitively understand degradation via chemical hydrolysis of the amidine moiety, which leads to insolubility and a large reduction in CO 2 adsorption capacity (1.7 wt %). Neutron vibrational spectroscopy and DFT calculations confirm that CO 2 binds strongly to the amidine motif, inducing a strong bending of the CO 2 molecule from its linear geometry. The coupled insights into mechanisms and behaviors of CO 2 adsorption in amidine-functionalized polymers provides a foundation for future investigations of CO 2 -responsive polymers and soft materials to improve carbon capture and sequestration technologies.

Chun, Danielle J.↗
DOE OSTI2025

Bottlebrush Block Copolymer Thin Films

The self-assembly of block copolymers (BCPs) in thin films is governed by interfacial interactions (enthalpy) between the blocks and interfaces (at both the substrate and the surface). Advantage can also be taken of entropy to control the polymer orientation. Here, we synthesized a series of bottlebrush block copolymers (BBCPs), with deuterated polystyrene (DPS) as the core block and poly­(solketal acrylate) (PSA) as the corona block, where the backbone length (N BB) and grafting densities (GDs) were varied. The hydrophobic PSA block was converted to a hydrophilic poly­(glyceryl acrylate) (PGA) block by solid-state hydrolysis, bringing the BBCP from a disordered state into an ordered state with a lamellar microdomain morphology. The orientation of the morphology as a function of distance from the interfaces was systematically investigated by atomic force microscopy (AFM), interference microscopy, grazing-incidence small-angle X-ray scattering (GISAXS), and grazing-incidence small angle neutron scattering (GISANS). For N BB = 1 (diblock BCP), a mixed lamellar orientation was found. For N BB = 5 (star-like BBCP), a vertical orientation of the lamellar microdomains was found dominantly at the interfaces that propagated into the bulk of the film due to the entropic penalty associated with constraints on the junction points. Increasing the N BB to 50 (rod-like BBCP) and 100 (worm-like BBCP) yielded a random orientation, as the side chains became overcrowded when aligned in the same direction. By reducing the grafting density (GD) of a N BB = 50 BBCP from 100% to 75% and 50% by the incorporation of spacers into the backbone, the steric hindrance of side chains is reduced markedly, facilitating a vertical orientation of the lamellar microdomains. However, the vertical orientation becomes more random within the bulk of the thin film for different BBCP architectures. By modifying the substrate with a layer of PS, the preferential interactions between the core block of the BBCP and the interfaces induce a reconfiguration of the BBCP, drawing the core block out to contact substrate directly driven by enthalpy. Under these conditions, N BB = 5 showed a predominantly parallel orientation of the lamellar microdomains with the corona block minimizing contact with the substrate. Higher N BB values of 50 and 100 showed a more random orientation of the lamellar microdomains at different depths on the PS-modified substrate. Overall, thin-film morphology was regulated by tuning the configuration of the BBCP, varying the entropic contribution to the microdomain orientation.

Chen, Zhan↗
DOE OSTI2020

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell

The development of membranes with low fuel crossover and high fuel efficiency is a key issue in direct borohydride fuel cells (DBFCs). In previous work, we produced a poly(vinyl alcohol) (PVA)-anion-exchange resin (AER) membrane with a low fuel crossover and a low fuel efficiency by introducing Co ions. In this work, a bilayer membrane was designed to improve the fuel efficiency and cell performance. The bilayer membrane was prepared by casting a PVA-AER wet gel onto the partially desiccated Co-PVA-AER gel. The bilayer membrane showed a borohydride permeability of 1.34 × 10 –6 cm 2 ·s –1 , which was even lower than that of the Co-PVA-AER membrane (1.98 ×10 –6 cm 2 ·s –1 ) and the PVA-AER membrane (2.80 × 10 –6 cm 2 ·s –1 ). The DBFC using the bilayer membrane exhibited a higher fuel efficiency (37.4%) and output power (1.73 Wh) than the DBFCs using the Co-PVA-AER membrane (33.3%, 1.27 Wh) and the PVA-AER membrane (34.3%, 1.2 Wh). Furthermore, the DBFC using the bilayer membrane achieved a peak power density of 327 mW·cm –2 , which was 2.14 times of that of the DBFC using the PVA-AER membrane (153 mW·cm –2 ). Finally, the drastic improvement benefited from the bilayer design, which introduced an interphase to suppress fuel crossover and avoided unnecessary borohydride hydrolysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Capture and Decomposition of the Nerve Agent Simulant, DMCP, Using the Zeolitic Imidazolate Framework (ZIF-8)

Understanding mechanisms of decontamination of chemical warfare agents (CWA) is an area of intense research aimed at developing new filtration materials to protect soldiers and civilians in case of state-sponsored or terrorist attack. In this study, we employed complementary structural, chemical, and dynamic probes and in situ data collection, to elucidate the complex chemistry, capture, and decomposition of the CWA simulant, dimethyl chlorophosphonate (DMCP). Our work reveals key details of the reactive adsorption of DMCP and demonstrates the versatility of zeolitic imidazolate framework (ZIF-8) as a plausible material for CWA capture and decomposition. Here, the in situ synchrotron-based powder X-ray diffraction (PXRD) and pair distribution function (PDF) studies, combined with Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), zinc K-edge X-ray absorption near edge structure (XANES), and Raman spectroscopies, showed that the unique structure, chemical state, and topology of ZIF-8 enable accessibility, adsorption, and hydrolysis of DMCP into the pores and revealed the importance of linker chemistry and Zn 2+ sites for nerve agent decomposition. DMCP decontamination and decomposition product(s) formation were observed by thermogravimetric analysis, FT-IR spectroscopy, and phosphorus (P) K-edge XANES studies. Differential PDF analysis indicated that the average structure of ZIF-8 (at the 30 Å scale) remains unchanged after DMCP dosing and provided information on the dynamics of interactions of DMCP with the ZIF-8 framework. Using in situ PXRD and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), we showed that nearly 90% regeneration of the ZIF-8 structure and complete liberation of DMCP and decomposition products occur upon heating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

In-Operando Study of Shape Retention and Microstructure Development in a Hydrolyzing Sol–Gel Ink during 3D-Printing

3D printing of amorphous and crystalline ceramics is of paramount importance for the fabrication of a wide range of devices with applications across different technology fields. Printed ceramics are remarkably enabled by the sol-gel synthesis method in conjunction with continuous filament direct ink writing. During printing, multiple processes contribute to the evolution of inks including shape retention, chemical conversion, solidification, and microstructure formation. Traditionally, depending on the ink composition and printing environment, several mechanisms have been associated with the shape retention and solidification of 3D printed structures: gelation, rapid solvent evaporation, energy-driven phase transformation, and chemical-driven phase transformation. Understanding the fundamental differences between these mechanisms becomes key since they strongly influence the spatiotemporal evolution of the materials, as the out-of-equilibrium processes inherent to the extrusion, relaxation, and solidification of printed materials have significant effects on the materials properties. Herein, we investigate the shape retention mechanism and the hydrolysis-induced material conversion and microstructure formation during the 3D printing of a water reactive sol-gel ink that transforms into titanium dioxide-based ceramic. This study aims at identifying characteristic mechanisms associated with the material transformation, establishing connections between the microstructure development and the timescales associated with solidification under operando 3D-printing conditions. The investigation of this material's out-of-equilibrium pathways under processing conditions is enabled by time-resolved coherent X-ray scattering, providing simultaneous access to temporospatially resolved microstructural and dynamics information. Furthermore, we explore X-ray speckle tracking as a tool to resolve deformations of the microstructure in a printed filament associated with the deposition of consecutive filaments. Through this work, we aim at providing a fundamental understanding of the relationships behind these transformative processes in 3D printing and their timescales as the basis for achieving unprecedented control over printed materials microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Multiscale Modeling and Experimental Insights into High-Temperature Soil Biodegradation Dynamics of Semi-Crystalline Poly(Lactic Acid) Nonwoven Fabrics

This study investigates the biodegradation of semi-crystalline poly(lactic acid) (PLA) nonwovens (NWs) in soil at 58 °C using both experimental and mathematical modeling approaches. The model utilizes a system of parabolic diffusion-reaction partial differential equations (PDEs) to elucidate chemical transformations over time and in space. It accounts for phenomena such as the diffusion of water and lactic acid monomers through the polymer matrix and into the surrounding soil, along with their microbial breakdown. It also accounts for the initial PLA crystallinity and predicts its evolution in time. The model is solved numerically for a single filament, and the results were used to shed light on PLA NW transformations observed in soil over a 180-day incubation period. Various characterization techniques, including scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Raman spectroscopy, were employed to assess morphological changes, crystallinity, and molecular changes in the NWs throughout the experiment. By comparing the experimental data with the model predictions, the hydrolysis rate coefficient was found to be 3.37 × 10 -7 s -1 , while the rate of microbial degradation of lactic acid monomers was faster, of the order of 9.63 × 10 -7 s -1 . The findings highlight the significant role of crystallinity in the biodegradation process. The PLA degradation ceases when no amorphous material remains, and the crystallinity reaches 0.8, as observed in the experiments by day 120. Furthermore, this research contributes to a deeper understanding of PLA biodegradation dynamics and offers insights for effectively managing biodegradable materials in environmental settings.

Diffusion−reaction modeling↗
DOE OSTI2020

Nitrogenase Bioelectrocatalysis: ATP-Independent Ammonia Production Using a Redox Polymer/MoFe Protein System

Nitrogenase is the only biological catalyst that is understood to be able to convert nitrogen gas to ammonia. In microorganisms, the MoFe catalytic protein of nitrogenase is reduced by a transient Fe protein binding and separate hydrolysis of ATP. Yet, the requirement of 16 ATP molecules by the Fe protein for the 8 electron transfer is an energy-intense caveat to the enzymatic synthesis of NH 3 and is challenging from an electrochemical perspective. Thus, we report the redox polymer-based ATP-free mediated electron-transfer system of MoFe nitrogenase using cobaltocene-functionalized poly(allylamine) (Cc-PAA), which is able to reduce the MoFe nitrogenase directly with a low redox potential of -0.58 V vs SHE. An efficient immobilization of MoFe nitrogenase via Cc-PAA allowed for the bioelectrocatalytic reduction of N 3 – , NO 2 – , and N 2 to NH 3 . Bulk bioelectrosynthetic experiments produced 7 ± 2 and 30 ± 5 nmol of NH 3 from NO 2 – and N 3 – reduction for 30 min, respectively. In addition, biosynthetic N 2 reduction to NH 3 was confirmed by 15 N 2 labeling experiments with NMR analysis. This mediated electron-transfer approach of the immobilized nitrogenase using the Cc-PAA redox polymer provides a valuable technological basis for scale-up and industrial uses in the future of bioelectrosynthesis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Reactive Species and Reaction Pathways for the Oxidative Cleavage of 4-Octene and Oleic Acid with H 2 O 2 over Tungsten Oxide Catalysts

The oxidative cleavage of carbon-carbon double bonds (C=C) in alkenes and fatty acids produces aldehydes and acids valued as chemical intermediates. Solid tungsten oxide catalysts are low cost, non-toxic, and selective for the oxidative cleavage of C=C bonds with hydrogen peroxide (H 2 O 2 ) and are, therefore, a promising option for continuous processes. Despite the relevance of these materials, the elementary steps involved and their sensitivity to the form of W sites present on surfaces have not been described. In this work, we combine in situ spectroscopy and rate measurements to identify significant steps in the reaction, the reactive species present on catalysts, and examine differences between the kinetics of this reaction on isolated W atoms grafted to alumina and on those exposed on crystalline WO 3 nanoparticles. Raman spectroscopy shows that W-peroxo complexes (W-(η 2 -O 2 ) formed from H 2 O 2 ) react in a kinetically relevant step to produce epoxides, which undergo hydrolysis at protic surface sites. Subsequently, the CH 3 CN solvent deprotonates diols to form alpha hydroxy ketones that react to form aldehydes and water following nucleophilic attack of H 2 O 2 . Turnover rates for oxidative cleavage, determined by in situ site titrations, on WO x -Al 2 O 3 are 75% greater than those on WO 3 at standard conditions. These differences reflect activation enthalpies (ΔH ‡ ) for oxidative cleavage of 4-octene that are much lower for the isolated WO x sites (36±3 and 60±6 kJ∙mol -1 for WO x -Al 2 O 3 and WO 3 , respectively) and correlate strongly with the difference between enthalpies of adsorption for epoxyoctane (ΔH ads,epox ), which resembles the transition state for epoxidation. The WO x -Al 2 O 3 catalysts mediate oxidative cleavage of oleic acid with H 2 O 2 following a mechanism comparable to that for 4-octene. The WO 3 materials, however, form only the epoxide and do not cleave the C-C bond or produce aldehydes and acids. These differences reflect the distinct site requirements for these reaction pathways and indicate that acid sites required for diol formation are strongly inhibited by oleic acids and epoxides on WO 3 whereas the Al 2 O 3 support provides sites competent for this reaction and increase the yield of the oxidative cleavage products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ammonia-Assisted Light Alkane Anti-coke Reforming on Isolated ReO x Sites in Zeolite

The conventional reforming produces H 2 with stoichiometric amounts of CO and CO 2 from hydrocarbons. Here, we show that CO x -free H 2 can be produced from ammonia-assisted reforming (ammoreforming) of natural gas liquids (C n H 2n+2 + nNH 3 = nHCN + (2n + 1) H 2 , n = 2 or 3) at the same conditions as the steam reforming. Such a process co-produces HCN, which can be easily separated from H 2 and used as value-added chemicals or for NH 3 recycling through hydrolysis. In addition, the ammoreforming of ethane and propane was realized over the Re-modified HZSM-5 zeolite rather than the traditional Pt-based catalyst for the BMA process (methane ammoreforming). The specific activity of the Re/HZSM-5 catalysts at 650 °C is up to 1 mol H2 /g Re /min (or 180 min –1 ) during ethane ammoreforming. The catalyst is highly coke resistant and shows only slight deactivation with a time-on-stream up to 20 h. Characterization of the fresh and used catalysts by X-ray absorption and Raman spectroscopies suggested that the isolated ReO x site grafted by AlO 4 – tetrahedral in the zeolite framework is responsible for the outstanding catalytic activity and coke resistibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Machine Learning-Guided Identification of PET Hydrolases from Natural Diversity

The enzymatic depolymerization of poly(ethylene terephthalate) (PET) is emerging as a leading chemical recycling technology for waste polyester. As part of this endeavor, new candidate enzymes identified from natural diversity can serve as useful starting points for enzyme evolution and engineering. In this study, we improved upon HMM searches by applying an iterative machine learning strategy to identify 400 putative PET-degrading enzymes (PET hydrolases) from naturally occurring homologs. Using high-throughput (HTP) experimental techniques, we successfully expressed and purified >200 enzyme candidates and assayed them for PET hydrolysis activity as a function of pH, temperature, and substrate crystallinity. From this library, we discovered 91 previously unknown PET hydrolases, 35 of which retain activity at pH 4.5 on crystalline material, which are conditions relevant to developing more efficient commercial processes. Notably, four enzymes showed equal to or higher activity than LCC-ICCG, a benchmark PET hydrolase, at this challenging condition in our screening assay, and 11 of which have pH optima <7. Using these data, we identified regions of PETases statistically correlated to activity at lower pH. We additionally investigated the effect of condition-specific activity data on trained machine learning predictors and found a precision (putative hit rate) improvement of up to 30% compared to a Hidden Markov Model alone. Our findings show that by pointing enzyme discovery toward conditions of interest with multiple rounds of experimental and machine learning, we can discover large sets of active enzymes and explore factors associated with activity at those conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atrazine Degradation Using Immobilized Triazine Hydrolase from Arthrobacter aurescens TC1 in Mesoporous Silica Nanomaterials

Triazine hydrolase fromArthrobacter aurescens TC1 (TrzN) was successfully immobilized on mesoporous silica nanomaterials (MSNs) for the first time. For both nonfunctionalized MSNs and MSNs functionalized with Zn(II), three pore sizes were evaluated for their ability to immobilize wild-type TrzN: Mobile composition of matter no. 41 (small, 3 nm pores), mesoporous silica nanoparticle material with 10 nm pore diameter (MSN-10) (medium, 6-12 nm pores), and pore-expanded MSN-10 (large, 15-30 nm pores). Of these six TrzN:MSN biomaterials, it was shown that TrzN:MSN-10 was the most active (3.8 +/- 0.4 x 10 -5 U/mg) toward the hydrolysis of a 50 uM atrazine solution at 25 degrees C. The TrzN:MSN-10 biomaterial was then coated in chitosan (TrzN:MSN-10:Chit) as chitosan has been shown to increase stability in extreme conditions such as low/high pH, heat shock, and the presence of organic solvents. TrzN:MSN-10:Chit was shown to be a superior TrzN biomaterial to TrzN:MSN-10 as it exhibited higher activity under all storage conditions, in the presence of 20% MeOH, at low and high pH values, and at elevated temperatures up to 80 degrees C. Finally, the TrzN:MSN-10:Chit biomaterial was shown to be fully active in river water, which establishes it as a functional biomaterial under actual field conditions. A combination of these data indicate that the TrzN:MSN-10:Chit biomaterial exhibited the best overall catalytic profile making it a promising biocatalyst for the bioremediation of atrazine.

09 BIOMASS FUELS↗
DOE OSTI2025

Radical Treatment of Haloacetonitriles in Aqueous Systems: A Kinetic Study

Haloacetonitriles (HANs) are important drinking water disinfection byproducts formed through the chlorination and chloramination of amino acids. Although HAN concentrations in treated water are usually lower than trihalomethanes, they are still of major concern due to their higher cyto- and genotoxicity. HANs undergo chemical transformations by hydrolysis on the hour to week time scales; however, for possible direct water reuse situations, their active removal using advanced oxidation/reduction processes (AO/RPs) may be required. We report here our systematic kinetic study of the four major AO/RP radiolysis species, oxidizing hydroxyl (·OH) and sulfate (SO 4 −· ) radicals and reducing hydrated electron (e aq − ) and hydrogen atoms (H · ) with five HANs (mono-, di-, and trichloroacetonitriles and mono- and dibromoacetonitriles) in water measured using electron pulse radiolysis techniques. At ambient temperatures and pH 1−7, significant reactivity was found for e aq − ( k = (1−5) × 10 10 M −1 s −1 ) and H · atoms ( k = (1 − 40 × 10 7 M −1 s −1 ), but only minimal oxidation by ·OH ( k = (0.6−10) × 10 7 M −1 s −1 ) and SO 4 −· ( k = (0.2−4) × 10 6 M −1 s −1 ) occurred. These data suggest that the large-scale AO/RP treatment of these contaminants will be effective for deaerated reducing systems, where the reductive electron-induced degradation of HANs will occur.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

C10-Benzoate Esters of Anhydrotetracycline Inhibit Tetracycline Destructases and Recover Tetracycline Antibacterial Activity

Tetracyclines (TCs) are an important class of antibiotics threatened by enzymatic inactivation. These tetracycline-inactivating enzymes, also known as tetracycline destructases (TDases), are a subfamily of class A flavin monooxygenases (FMOs) that catalyze hydroxyl group transfer and oxygen insertion (Baeyer–Villiger type) reactions on TC substrate scaffolds. Semisynthetic modification of TCs (e.g., tigecycline, omadacycline, eravacycline, and sarecycline) has proven effective in evading certain resistance mechanisms, such as ribosomal protection and efflux, but does not protect against TDase-mediated resistance. Here, we report the design, synthesis, and evaluation of a new series of 22 semisynthetic TDase inhibitors that explore D-ring substitution of anhydrotetracycline (aTC) including 14 C10-benzoate ester and eight C9-benzamides. Overall, the C10-benzoate esters displayed enhanced bioactivity and water solubility compared to the corresponding C9-benzamides featuring the same heterocyclic aryl side chains. The C10-benzoate ester derivatives of aTC were prepared in a high-yield one-step synthesis without the need for protecting groups. The C10-esters are water-soluble, stable toward hydrolysis, and display dose-dependent rescue of tetracycline antibiotic activity in E. coli expressing two types of tetracycline destructases, represented by TetX7 (Type 1) and Tet50 (Type 2). The best inhibitors recovered tetracycline antibiotic activity at concentrations as low as 2 μM, producing synergistic scores <0.5 in the fractional inhibitory concentration index (FICI) against TDase-expressing strains of E. coli and clinical P. aeruginosa. The C10-benzoate ester derivatives of aTC reported here are promising new leads for the development of tetracycline drug combination therapies to overcome TDase-mediated antibiotic resistance.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Role of Amorphous Chains in Nanoplastic Formation from Semicrystalline Polymers

Semicrystalline polymers, e.g., polyethylene terephthalate (PET), release micro- (100 nm to 1 mm) and nanoplastics (up to 100 nm) [MNPL] when they are degraded under quiescent conditions. However, the exact molecular mechanisms leading to material fragmentation into MNPL are unknown. Here, we monitor the evolution of chain molecular weight and the MNPL production kinetics during hydrolysis of PET pellets. We find that only ~0.6% of the amorphous phase ester bonds are hydrolyzed at the onset of MNPL release. Then, by combining a random scission model with measured amorphous spacings, we estimate that only ~15% of the stress transmitters in the amorphous phase, namely, bridges and entangled loops, have failed by this point. Thus, spontaneous fragmentation of the semicrystalline nanostructure occurs despite significant intercrystalline connectivity. We resolve this apparent contradiction by proposing that fragmentation can only occur when progressive tie-chain scission causes the material to undergo the ductile/brittle transition. Mechanistically, we speculate that the internal stresses responsible for material fragmentation are caused by processing (i.e., residual stresses) and/or sample densification induced by chemi-crystallization. We discuss additional factors that may affect our analysis and thus require further investigation, such as skin-core effects, preferential degradation of stress transmitters and/or recrystallization processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Construction of MoS 2 /MoO 3 Heterostructure with Ultrafast-Charged and Superior Low-Temperature Sodium Storage Properties

The electrochemical reaction kinetics of sodium-ion batteries (SIBs) become sluggish at low temperatures, resulting in significant reductions in energy density and power density. Rational design of anode materials with excellent low-temperature performance is of great significance for promoting the application of SIBs under extreme conditions. Here, in this study, the spontaneous hydrolysis and oxidation reactions of MoS 2 in aqueous solution are used to successfully construct the MoS 2 /MoO 3 heterostructure. The formation of built-in electric fields at the MoS 2 /MoO 3 heterointerfaces improves the electrochemical reaction kinetics, thereby enhancing the rate performance. In addition, the dual-phase material can effectively buffer the volume strain during the cycle process, thereby improving the cycle stability. Thus, the MoS 2 /MoO 3 displays ultrafast charging properties at room temperature (up to 244.6 mAh g –1 at 40 A g –1 , discharge/charge in 22 s). Even at −40 °C, it also exhibits a high capacity of 303.7 mAh g –1 and superior cycling performance (capacity retention rate up to 92.9% after 900 cycles at 2 A g –1 ).

MoS2↗
DOE OSTI2023

Discovering and Designing a Chimeric Hyperthermophilic Chitinase for Crystalline Chitin Degradation

Chitin is one of the most abundant renewable biopolymers on earth. However, it is highly crystalline and recalcitrant to degrade. Here, we report a hyperthermophilic chitinase (ActChi) to directly hydrolyze crystalline chitin at its optimal temperature of 80 °C. It contains a malectin domain, a fibronectin type-III (Fn3) domain, and a catalytic domain (CD chi ). Both Fn3 and malectin have the function of chitin binding domain (ChBD) to increase the activity. Fn3 also significantly increases thermostability, but malectin decreases it. To enhance both activity and thermostability, here we introduced a heterogeneous and hyperthermophilic ChBD at the N-terminus of CD chi to obtain ChBD-CD chi . The activity of this hybrid enzyme is 201 U/μmol for crystalline chitin, which has increased 400% compared with that of ActChi. In addition, ChBD-CD chi can continuously degrade crystalline chitin for more than 4 days at 70 °C to increase the overall hydrolysis rate. The strategy is a good example of green sustainable degradation for crystalline biopolymer in nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗