SEARCH · Engineering Papers

Results for “Heterogeneity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS2014

Recycling of Oceanic Lithosphere: Water, fO2 and Fe-isotope Constraints

Spinel peridotite and garnet pyroxenite xenoliths from Hawaii provide important clues about the composition of the oceanic lithosphere, and can be used to assess its contribution to mantle heterogeneity upon recycling. The peridotites have lower bulk H2O (approximately 70-114 ppm) than the MORB source, qualitatively consistent with melt depletion. The garnet pyroxenites (high pressure cumulates) have higher H2O (200-460 ppm, up to 550 ppm accounting for phlogopite) and low H2O/Ce ratios (less than 100). The peridotites have relatively light Fe-isotopes (delta Fe -57 = -0.34 to 0.13) that decrease with increasing depletion, while the pyroxenites are significantly heavier (delta Fe-57 up to 0.3). The observed xenolith, as well as MORB and OIB total Fe-isotope variability is larger that can be explained by existing melting models. The high H2O and low H2O/Ce ratios of pyroxenites are similar to estimates of EM-type OIB sources, while their heavy delta Fe-57 are similar to some Society and Cook-Austral basalts. Therefore, recycling of mineralogically enriched oceanic lithosphere (i.e. pyroxenites) may contribute to OIB sources and mantle heterogeneity. The Fe(3+)/Sigma systematics of these xenoliths also suggest that there might be lateral redox gradients within the lithosphere, between juxtaposed oxidized spinel peridotites (deltaFMQ = -0.7 to 1.6, at 15 kb) and more reduced pyroxenites (deltaFMQ = -2 to -0.4, at 20-25kb). Such mineralogically and compositionally imposed fO2 gradients may generate local redox melting due to changes in fluid speciation (e.g. reduced fluids from pyroxenite encountering more oxidized peridotite). Formation of such incipient, small degree melts could further contribute to metasomatic features seen in peridotites, mantle heterogeneity, as well as the low velocity and high electrical conductivity structures near the base of the lithosphere and upper mantle.

Bizmis, M.↗

NASA NTRS2016

Earth Science Data Analytics: Preparing for Extracting Knowledge from Information

Data analytics is the process of examining large amounts of data of a variety of types to uncover hidden patterns, unknown correlations and other useful information. Data analytics is a broad term that includes data analysis, as well as an understanding of the cognitive processes an analyst uses to understand problems and explore data in meaningful ways. Analytics also include data extraction, transformation, and reduction, utilizing specific tools, techniques, and methods. Turning to data science, definitions of data science sound very similar to those of data analytics (which leads to a lot of the confusion between the two). But the skills needed for both, co-analyzing large amounts of heterogeneous data, understanding and utilizing relevant tools and techniques, and subject matter expertise, although similar, serve different purposes. Data Analytics takes on a practitioners approach to applying expertise and skills to solve issues and gain subject knowledge. Data Science, is more theoretical (research in itself) in nature, providing strategic actionable insights and new innovative methodologies. Earth Science Data Analytics (ESDA) is the process of examining, preparing, reducing, and analyzing large amounts of spatial (multi-dimensional), temporal, or spectral data using a variety of data types to uncover patterns, correlations and other information, to better understand our Earth. The large variety of datasets (temporal spatial differences, data types, formats, etc.) invite the need for data analytics skills that understand the science domain, and data preparation, reduction, and analysis techniques, from a practitioners point of view. The application of these skills to ESDA is the focus of this presentation. The Earth Science Information Partners (ESIP) Federation Earth Science Data Analytics (ESDA) Cluster was created in recognition of the practical need to facilitate the co-analysis of large amounts of data and information for Earth science. Thus, from a to advance science point of view: On the continuum of ever evolving data management systems, we need to understand and develop ways that allow for the variety of data relationships to be examined, and information to be manipulated, such that knowledge can be enhanced, to facilitate science. Recognizing the importance and potential impacts of the unlimited ways to co-analyze heterogeneous datasets, now and especially in the future, one of the objectives of the ESDA cluster is to facilitate the preparation of individuals to understand and apply needed skills to Earth science data analytics. Pinpointing and communicating the needed skills and expertise is new, and not easy. Information technology is just beginning to provide the tools for advancing the analysis of heterogeneous datasets in a big way, thus, providing opportunity to discover unobvious scientific relationships, previously invisible to the science eye. And it is not easy It takes individuals, or teams of individuals, with just the right combination of skills to understand the data and develop the methods to glean knowledge out of data and information. In addition, whereas definitions of data science and big data are (more or less) available (summarized in Reference 5), Earth science data analytics is virtually ignored in the literature, (barring a few excellent sources).

data analytics↗

NASA NTRS2017

Monitoring Land Surface Albedo and Vegetation Dynamics Using High Spatial and Temporal Resolution Synthetic Time Series from Landsat and the MODIS BRDF/NBAR/Albedo Product

Seasonal vegetation phenology can significantly alter surface albedo which in turn affects the global energy balance and the albedo warmingcooling feedbacks that impact climate change. To monitor and quantify the surface dynamics of heterogeneous landscapes, high temporal and spatial resolution synthetic time series of albedo and the enhanced vegetation index (EVI) were generated from the 500-meter Moderate Resolution Imaging Spectroradiometer (MODIS) operational Collection V006 daily BRDF (Bidirectional Reflectance Distribution Function) / NBAR (Nadir BRDF-Adjusted Reflectance) / albedo products and 30-meter Landsat 5 albedo and near-nadir reflectance data through the use of the Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM). The traditional Landsat Albedo (Shuai et al., 2011) makes use of the MODIS BRDFAlbedo products (MCD43) by assigning appropriate BRDFs from coincident MODIS products to each Landsat image to generate a 30-meter Landsat albedo product for that acquisition date. The available cloud free Landsat 5 albedos (due to clouds, generated every 16 days at best) were used in conjunction with the daily MODIS albedos to determine the appropriate 30-meter albedos for the intervening daily time steps in this study. These enhanced daily 30-meter spatial resolution synthetic time series were then used to track albedo and vegetation phenology dynamics over three Ameriflux tower sites (Harvard Forest in 2007, Santa Rita in 2011 and Walker Branch in 2005). These Ameriflux sites were chosen as they are all quite nearby new towers coming on line for the National Ecological Observatory Network (NEON), and thus represent locations which will be served by spatially paired albedo measures in the near future. The availability of data from the NEON towers will greatly expand the sources of tower albedometer data available for evaluation of satellite products. At these three Ameriflux tower sites the synthetic time series of broadband shortwave albedos were evaluated using the tower albedo measurements with a Root Mean Square Error (RMSE) less than 0.013 and a bias within the range of 0.006. These synthetic time series provide much greater spatial detail than the 500 meter gridded MODIS data, especially over more heterogeneous surfaces, which improves the efforts to characterize and monitor the spatial variation across species and communities. The mean of the difference between maximum and minimum synthetic time series of albedo within the MODIS pixels over a subset of satellite data of Harvard Forest (16 kilometers by 14 kilometers) was as high as 0.2 during the snow-covered period and reduced to around 0.1 during the snow-free period. Similarly, we have used STARFM to also couple MODIS Nadir BRDF-Adjusted Reflectances (NBAR) values with Landsat 5 reflectances to generate daily synthetic times series of NBAR and thus Enhanced Vegetation Index (NBAR-EVI) at a 30-meter resolution. While normally STARFM is used with directional reflectances, the use of the view angle corrected daily MODIS NBAR values will provide more consistent time series. These synthetic times series of EVI are shown to capture seasonal vegetation dynamics with finer spatial and temporal details, especially over heterogeneous land surfaces.

Vegetation Index↗

NASA NTRS2017

Validation and Scaling of Soil Moisture in a Semi-Arid Environment: SMAP Validation Experiment 2015 (SMAPVEX15)

The NASA SMAP (Soil Moisture Active Passive) mission conducted the SMAP Validation Experiment 2015 (SMAPVEX15) in order to support the calibration and validation activities of SMAP soil moisture data products. The main goals of the experiment were to address issues regarding the spatial disaggregation methodologies for improvement of soil moisture products and validation of the in situ measurement upscaling techniques. To support these objectives high-resolution soil moisture maps were acquired with the airborne PALS (Passive Active L-band Sensor) instrument over an area in southeast Arizona that includes the Walnut Gulch Experimental Watershed (WGEW), and intensive ground sampling was carried out to augment the permanent in situ instrumentation. The objective of the paper was to establish the correspondence and relationship between the highly heterogeneous spatial distribution of soil moisture on the ground and the coarse resolution radiometer-based soil moisture retrievals of SMAP. The high-resolution mapping conducted with PALS provided the required connection between the in situ measurements and SMAP retrievals. The in situ measurements were used to validate the PALS soil moisture acquired at 1-km resolution. Based on the information from a dense network of rain gauges in the study area, the in situ soil moisture measurements did not capture all the precipitation events accurately. That is, the PALS and SMAP soil moisture estimates responded to precipitation events detected by rain gauges, which were in some cases not detected by the in situ soil moisture sensors. It was also concluded that the spatial distribution of the soil moisture resulted from the relatively small spatial extents of the typical convective storms in this region was not completely captured with the in situ stations. After removing those cases (approximately10 of the observations) the following metrics were obtained: RMSD (root mean square difference) of0.016m3m3 and correlation of 0.83. The PALS soil moisture was also compared to SMAP and in situ soil moisture at the 36-km scale, which is the SMAP grid size for the standard product. PALS and SMAP soil moistures were found to be very similar owing to the close match of the brightness temperature measurements and the use of a common soil moisture retrieval algorithm. Spatial heterogeneity, which was identified using the high-resolution PALS soil moisture and the intensive ground sampling, also contributed to differences between the soil moisture estimates. In general, discrepancies found between the L-band soil moisture estimates and the 5-cm depth in situ measurements require methodologies to mitigate the impact on their interpretations in soil moisture validation and algorithm development. Specifically, the metrics computed for the SMAP radiometer-based soil moisture product over WGEW will include errors resulting from rainfall, particularly during the monsoon season when the spatial distribution of soil moisture is especially heterogeneous.

SMAPVEX15↗

NASA NTRS2018

Implementation of a Comprehensive Ice Crystal Formation Parameterization for Cirrus and Mixed-Phase Clouds in the EMAC Model (Based on MESSy 2.53)

A comprehensive ice nucleation parameterization has been implemented in the global chemistry-climate model EMAC to realistically represent ice crystal number concentrations. The parameterization of Barahona and Nenes (2009, hereafter BN09) allows the treatment of ice nucleation, taking into account the competition for water vapour between homogeneous and heterogeneous nucleation and pre-existing ice crystals in cold clouds. Furthermore, the influence of chemically-heterogeneous, polydisperse aerosols is considered via multiple ice nucleating particle spectra, which are included in the parameterization to compute the heterogeneously formed ice crystals. BN09 has been implemented to operate both in the cirrus and in the mixed-phase regimes. Compared to the standard EMAC results, BN09 produces fewer ice crystals in the upper troposphere but higher ice crystal number concentrations in the middle troposphere, especially in the Northern Hemisphere where ice nucleating mineral dust particles are relatively abundant. The comparison with a climatological data set of aircraft measurements shows that BN09 used in the cirrus regime improves the model results and, therefore, is recommended for future EMAC simulations.

EMAC↗

NASA NTRS2020

A Computational Study to Investigate the Effect of Defect Geometries on the Fatigue Crack Driving Forces in Powder-Bed AM Materials

Powder-bed additive manufacturing (AM) processes are associated with the formation of multiple types of process-specific pores, including but not limited to lack-of-fusion (LoF) and keyhole pores. The performance of an AM component is dependent on the type of pores, their density and their proximity to the free surface, and other heterogeneities in the microstructure. In order to characterize the influence of porosity on the mechanical behavior of AM materials, it is imperative to quantitatively analyze the heterogeneous strain accumulation in the vicinity of porosity. Process-specific microstructure models are generated using SPPARKS, an open-source process simulation code. Spherical keyhole or irregular LoF pores are embedded into the microstructure models, which are meshed and input into a finite element code, ScIFEN, to solve for the heterogeneous strain localization in the vicinity of the pores. Given the non-smooth geometries of LoF pores, they readily promote strain accumulation in their vicinity thereby increasing the propensity of initiating fatigue cracks.

Saikumar R Yeratapally↗

NASA NTRS2021

The abundances of F, Cl, and H2O in eucrites: Implications for the origin of volatile depletion in the asteroid 4 Vesta

We conducted a petrologic study of apatite within eight unbrecciated, non-cumulate eucrites and two monomict, non-cumulate eucrites. These data were combined with previously published data to quantify the abundances of F, Cl, and H2O in the bulk silicate portion of asteroid 4 Vesta (BSV). Using a combination of apatite-based melt hygrometry/chlorometry and appropriately paired volatile/refractory element ratios, we determined that BSV has 3.0–7.2 ppm F, 0.39–1.8 ppm Cl, and 3.6–22 ppm H2O. The abundances of F and H2O are depleted in BSV relative to CI chondrites to a similar degree as F and H2O in the bulk silicate portion of the Moon. This degree of volatile depletion in BSV is similar to what has been determined previously for many moderately volatile elements in 4 Vesta (e.g., Na, K, Zn, Rb, Cs, and Pb). In contrast, Cl is depleted in 4 Vesta by a greater degree than what is recorded in samples from Earth or the Moon. Based on the Cl-isotopic compositions of eucrites and the bulk rock Cl/F ratios determined in this study, the eucrites likely formed through serial magmatism of a mantle with heterogeneous δ37Cl and Cl/F, not as extracts from a partially crystallized global magma ocean. Furthermore, the volatile depletion and Cl-isotopic heterogeneity recorded in eucrites is likely inherited, at least in part, from the precursor materials that accreted to form 4 Vesta and is unlikely to have resulted solely from degassing of a global magma ocean, magmatic degassing of eucrite melts, and/or volatile loss during thermal metamorphism. Although our results can be reconciled with the past presence of wide-scale melting on 4 Vesta (i.e., a partial magma ocean), any future models for eucrite petrogenesis involving a global magma ocean would need to account for the preservation of a heterogeneous eucrite source with respect to Cl/F ratios and Cl isotopes.

Francis M. Mccubbin↗

NASA NTRSDate not supplied

Anomalous and Ungrouped Carbonaceous Chondrites in the US Antarctic Meteorite Collection and their Potential Relevance to Ryugu and Bennu

With two different carbonaceous asteroid sample return missions in full swing, attention has focused on what connections can be made between the asteroid samples and the wide range of carbonaceous chondrite meteorites in worldwide collections. The US Antarctic meteorite collection contains nearly 1000 carbonaceous chondrites of various types including many in well-established groups as well as ungrouped, unusual or anomalous groups [1]. Some of the latter have been included in, or are possibly related to, recently proposed new carbonaceous chondrite classifications – CA and CY chondrites [2,3]. In addition to these, there are numerous ungrouped samples that have properties intermediate between established groups (like CM and CO; [4]), distinct from any other groups [5], or have anomalous properties that might be attributable to parent body processes such as heating, fluid interaction, or impacts [6]. Some CM anomalous or ungrouped chondrites share spectral features with Ryugu, which has a small hydration peak arguably due to hydrated minerals left after either impact heating or shock in carbonaceous chondrites [7]. PCA 91008, PCA 02012, GRO 95566, and LEW 85311 are all CMs that have experienced heating or metamorphism that may be due to impacts, solar radiation, or radiogenic decay [6]. These samples all have low H contents, C/H (bulk), and low 17O [6,8] and may hold clues to understanding the mineralogy of Ryugu, or interpretations of its spectral properties. WIS 91600, on the other hand, appears to be related to several other highly altered CM [6], and shares properties with the newly proposed CY chondrites [6]. An understanding of this grouplet will also aid in the interpretation of Bennu samples which have strong hydration features. In addition, ungrouped carbonaceous chondrites may provide valuable insights into the aqueous alteration potentially recorded in Bennu and Ryugu samples; such as the relatively moderate aqueous alteration recognized and dated at 4-5 myr after CAIs in MAC 88107 (C2-ungrouped) by [9] to the extensive aqueous alteration apparent in MIL 090292 (C1-ungrouped) [10]. Finally, LON 94101/94102 is a brecciated CM chondrite with numerous lithologies. Its appearance is similar to some of the brecciated lithologies visible at the surface of Bennu and Ryugu [11]. Although CM chondrites with multiple lithologies are common (e.g., [12]), the lithologies are often difficult to resolve at the hand specimen scale and only after some detailed e-beam characterization are the subtle lithologic differences evident (e.g., [13]). LON 94102 contains visibly distinct clasts at the hand specimen scale, relatively rare for CM breccias. The largest CM chondrites by mass from the U.S. Antarctic meteorite collection may provide insights into the extent of brecciation and heterogeneity within more typical CM chondrite-like source asteroids. For example, recent curation CT scans [14] show possible clasts within in a subsplit of ALH 83100 (CM1/2) which is the largest CM chondrite or CM chondrite pairing group in the U.S. Antarctic collection with an original mass of 3.019 kg. Similar work on additional subsplits or meteorites may aid our understanding of heterogeneity within CM chondrites from Antarctica. Initial classification of CM chondrites in U.S. Antarctic meteorite collection includes preliminary pairing when petrographically similar CM chondrites that have been previously found in the same field area. The two largest CM chondrite preliminary pairing groups by mass are the ALH 83102 (CM2) pairing group with an original mass of 2.554 kg and the EET 96005 (CM2) pairing group with an original mass of 1.125 kg. However, preliminary pairing groups assigned at classification—intrinsically— do not include stones that are petrographically distinct. Rigorous pairing group studies of CM chondrites from specific field sites are needed to investigate if there is unrecognized heterogeneity in CM chondrites from Antarctica that may represent common asteroid impactors (pre-atmospheric entry asteroids/meteoroids). Detailed pairing studies have the potential to recognize initial stones with multiple lithologies and investigate if there are stones that only sample one of those respective lithologies in the collection. These groups of heated CMs, extensively hydrated CMs, intermediate between CM and CO chondrites, and brecciated samples are all potentially relevant to Bennu and Ryugu samples, where heating, hydration, and brecciation have all come into play. These bodies might also be comprised of material intermediate to CM and CO chondrites, or at least distinct from the well-established CC groups. These small and unusual groups of carbonaceous chondrites may help to unlock new information about early solar system processes and aid in the understanding of the evolution of these carbonaceous asteroids.

meteorites↗

NASA NTRS2021

Assessing impacts of canopy 3D structure on chlorophyll fluorescence radiance and radiative budget of deciduous forest stands using DART

Although remote sensing (RS) of solar-induced chlorophyll fluorescence (SIF) is increasingly used as a valuable source of information about vegetation photosynthetic activity, the RS SIF observations are significantly influenced by canopy-specific structural features (i.e., canopy architecture including leaf area index and presence of woody components), atmospheric conditions during their acquisition (e.g., proportion of direct and diffuse irradiance) and observational geometric configurations (e.g., sun and viewing directions). Radiative transfer (RT) models have the potential to provide a better understanding of the canopy structural effects on the SIF emission and RS signals. Here, we used the DART model to assess the daily influence, from morning to evening, of forest 3D architecture on SIF nadir radiance, emission, escape factor and nadir yield of eight 100 m × 100 m forest study plots established in a temperate deciduous forest of the Smithsonian Environmental Research Center (Edgewater, MD, USA). The 3D architecture of each plot was derived from airborne LiDAR. DART simulations of these 3D forest plots and their 1D (i.e., vertical profile of sun-adapted and shade-adapted leaves) and 0D (i.e., homogeneous layer of sun-adapted leaves above an homogeneous layer of shade-adapted leaves) abstractions were compared to assess the relative errors (ε1D−3D and ε0D−3D) associated with horizontal and vertical structural heterogeneity, respectively. Forest 3D structure, especially horizontal heterogeneity, had a great influence on forest nadir SIF radiance, resulting in ε1D−3D up to 55% at 8:00 and 18:00 (i.e., for oblique sun directions). The key indicators of this impact, in the descending order of importance, were the SIF escape factor (ε1D−3D up to 40%), the attenuation of incident photosynthetically active radiation (ε1D−3D less than 5%), and the SIF emission yield (ε1D−3D less than 2%). The influence of forest architecture on the nadir SIF escape factor and SIF yield (ε1D−3D up to 40%) varied over time, with differences in forest stand structure, and per spectral domain, being always larger between 640 and 700 nm than between 700 and 850 nm. In addition, woody elements demonstrated a large influence on forest SIF radiance due to their “shading” effect (ε up to 17%) and their “blocking” effect (ε ≈ 10%), both of them higher for far-red than for red SIF. These results underline the importance of 3D forest canopy architecture, especially 2D heterogeneity, and inclusion of woody elements in RT modeling used for interpretation of the RS SIF signal, and subsequently for the estimation of gross primary production and detection of vegetation stress.

Omar Regaieg↗

NASA NTRSDate not supplied

A comparison between CERES TOA Radiative Fluxes and Airborne Radiative Flux Measurements from ARISE

Uncertainty in top-of-atmosphere (TOA) radiation fluxes observations are larger in the Arctic than in other regions. These uncertainties are due to the low sun angles and the highly reflective, anisotropic, and heterogeneous surface conditions. Quantifying, attributing, and reducing Arctic TOA radiative flux uncertainty enables a better understanding of the rapidly changing Arctic. To advance this goal, we compare the Cloud and Earth’s Radiant Energy System (CERES) TOA radiative fluxes with Arctic Radiation-IceBridge Sea and Ice Experiment (ARISE) campaign measurements collected in September 2014. We compare CERES TOA and aircraft radiative flux measurements using two complementary approaches: grid box average fluxes and instantaneously matched footprints. The grid box mean flux comparison indicates an agreement between CERES and aircraft measurements within 2σ uncertainty (calibration and inversion) in the longwave for all five grid boxes and for four-of-five grid boxes in the shortwave; shortwave and longwave mean differences are -7.9 and +2.3 Wm 2, respectively. The comparison of 36 40 instantaneously matched footprints with aircraft measurements reveals mean differences of -120.25 and -1.00.4 Wm 2 in the shortwave and longwave, respectively. To further explore the persistent negative difference in the shortwave, Wwe further quantify the effects of temporal and spatial sampling differences, angular distribution models, and scene identification to CERES-aircraft differences. Our analysis indicates that sampling differences (including scene evolution) account for an additional 1.8 and 1.7% uncertainty in the shortwave and longwave, respectively and , but indicates no bias. After accounting for this sampling uncertainty, all CERES-aircraft grid box mean fluxes agree within 2σ uncertainty. Scene identification errors due to sea ice concentration data set differences exhibit no bias in the shortwave flux difference and indicate the possibility of substantial differences in the CERES fluxes in specific cases with large spatial heterogeneity. Considering the instantaneously matched footprints, we find that the angular distribution models account may account for up to 7.3 Wm-2 of the persistent CERES-aircraft shortwave flux difference due to systematic differences in the anisotropy for sea ice partly cloudy scenes. Additional analysis using a special programmable scan model with the CERES FM2 instrument suggests a significant view zenith angle dependence of the CERES fluxes for sea ice partly cloudy scenes where shortwave fluxes systematically decrease with increasing view zenith angle; no dependence is found for other scene types. We conclude that (1) spatial heterogeneity and scene temporal evolution substantially limit our ability to use aircraft measurements to place strong constraints on CERES TOA fluxes and (2) that the representation of anisotropy in sea ice partly cloudy scenes is likely a significant factor contributing to the persistent negative CERES-aircraft shortwave flux difference in this comparison and require additional data to analysis fully quantify the potential bias.

Patrick C. Taylor↗

NASA NTRSDate not supplied

Radiative Flux Measurements from ARISE: A Comparison with CERES Top-of-Atmosphere Radiative Fluxes

Uncertainty in top-of-atmosphere (TOA) radiation fluxes observations are larger in the Arctic than in other regions. These uncertainties are due to the low sun angles and the highly reflective, anisotropic, and heterogeneous surface conditions. Quantifying, attributing, and reducing Arctic TOA radiative flux uncertainty enables a better understanding of the rapidly changing Arctic. To advance this goal, we compare the Cloud and Earth’s Radiant Energy System (CERES) TOA radiative fluxes with Arctic Radiation-IceBridge Sea and Ice Experiment (ARISE) campaign measurements collected in September 2014. We compare CERES TOA and aircraft radiative flux measurements using two complementary approaches: grid box average fluxes and instantaneously matched footprints. The grid box mean flux comparison indicates an agreement between CERES and aircraft measurements within 2 uncertainty (calibration and inversion) in the longwave for all five grid boxes and for four-of-five grid boxes in the shortwave; shortwave and longwave mean differences are -7.9 and +2.3 Wm‑2, respectively. The comparison of 36 instantaneously matched footprints with aircraft measurements reveals mean differences of -10.5 and 0.4 Wm‑2 in the shortwave and longwave, respectively. To further explore the persistent negative difference in the shortwave, we further quantify the effects of temporal and spatial sampling differences, angular distribution models, and scene identification to CERES-aircraft differences. Our analysis indicates that sampling differences (including scene evolution) account for an additional 1.8 and 1.7% uncertainty in the shortwave and longwave, respectively and indicates no bias. After accounting for this sampling uncertainty, all CERES-aircraft grid box mean fluxes agree within 2 uncertainty. Scene identification errors due to sea ice concentration data set differences exhibit no bias in the shortwave flux difference and indicate the possibility of substantial differences in the CERES fluxes in specific cases with large spatial heterogeneity. Considering the instantaneously matched footprints, we find that the angular distribution models account may account for up to ‑7.3 Wm-2 of the persistent CERES-aircraft shortwave flux difference due to systematic differences in the anisotropy for sea ice partly cloudy scenes. Additional analysis using a special scan model with the CERES FM2 instrument suggests a significant view zenith angle dependence of the CERES fluxes for sea ice partly cloudy scenes where shortwave fluxes systematically decrease with increasing view zenith angle; no dependence is found for other scene types. We conclude that (1) spatial heterogeneity and scene temporal evolution substantially limit our ability to use aircraft measurements to place strong constraints on CERES TOA fluxes and (2) that the representation of anisotropy in sea ice partly cloudy scenes is a significant factor contributing to the persistent negative CERES-aircraft shortwave flux difference in this comparison and require additional data to analysis fully quantify the potential bias.

Patrick C Taylor↗

NASA NTRSDate not supplied

Using Controlled Impact Experiments to Understand the Effects of Cohesive Blocks on the Cratering Process

When considering large-scale impact events that occur in the gravity-regime, smallscale target heterogeneities (on order of the projectile diameter) are anticipated to have a minimal effect on the cratering process and are therefore not considered in scaling relations [1-3]. Such heterogeneities and other details of the target's strength and structure, however, become increasingly influential as the magnitude of the impact decreases [4]. At the scale of craters forming mostly in regolith on the Moon (< a few meters), for example, target properties such as cohesive strength, density, porosity, and friction have more leverage than gravity to influence the resultant crater dimensions [5]. Further complications beyond just target properties can manifest in many forms, such as subsurface layers [6]; the presence of random, competent blocks [7]; buried lenses of impact melt; and/or pockets of regolith compacted or indurated to varying degrees by previous impacts. Summing the total effect of target properties and any additional heterogeneities for integration into scaling relations is not straightforward, as each individual parameter will have unequal, and so far, unquantified, effects on the final crater. Even when craters are produced under a best-case scenario of controlled laboratory conditions, understanding the entire relevant parameter space can be a formidable task, and deconvolution of all the contributing factors can be a complex undertaking. To begin the process of quantifying such effects, we are conducting an extensive series of impact experiments to build a framework for the interpretation of craters observed on the characteristically complex surfaces throughout the solar system. Here we present the first, and simplest, configuration to be examined in this multi-year experimental campaign: one in which solitary, cohesive blocks are placed in the path of the projectile’s trajectory at different burial depths in granular, sand targets. Among the variables to be investigated in this configuration are the influence of block size, compressive strength, and burial depth.

impact crater↗

NASA NTRS2019

Comparison of Neutral Outgassing of Comet 67P/Churyumov-Gerasimenko Inbound and Outbound Beyond 3 Au From ROSINA/DFMS

Context. Pre-equinox measurements of comet 67P/Churyumov-Gerasimenko with the mass spectrometer ROSINA/DFMS on board the Rosetta spacecraft revealed a strongly heterogeneous coma. The abundances of major and various minor volatile species were found to depend on the latitude and longitude of the nadir point of the spacecraft. The observed time variability of coma species remained consistent for about three months up to equinox. The chemical variability could be generally interpreted in terms of surface temperature and seasonal effects superposed on some kind of chemical heterogeneity of the nucleus. Aims. We compare here pre-equinox (inbound) ROSINA/DFMS measurements from 2014 to measurements taken after the outbound equinox in 2016, both at heliocentric distances larger than 3 AU. For a direct comparison we limit our observations to the southern hemisphere. Methods. We report the similarities and differences in the concentrations and time variability of neutral species under similar insolation conditions (heliocentric distance and season) pre- and post-equinox, and interpret them in light of the previously published observations. In addition, we extend both the pre- and post-equinox analysis by comparing species concentrations with a mixture of CO2 and H2O. Results. Our results show significant changes in the abundances of neutral species in the coma from pre- to post-equinox that are indicative of seasonally driven nucleus heterogeneity. Conclusions. The observed pre- and post-equinox patterns can generally be explained by the strong erosion in the southern hemisphere that moves volatile-rich layers near the surface.

comets↗

NASA NTRS2023

Interactions Between Thresholds and Spatial Discretizations of Snow: Insights From Estimates of Wolverine Denning Habitat in the Colorado Rocky Mountains

Thresholds can be used to interpret environmental data in a way that is easily communicated and useful for decision making purposes. However, thresholds are often developed for specific data products and time periods, changing findings when the same threshold is applied to datasets or periods with different characteristics. Here, we test the impact of different spatial discretizations of snow on annual estimates of wolverine denning opportunities in the Colorado Rocky Mountains, defined using a snow water equivalent (SWE) threshold (0.20 m) and threshold date (15 May) from previous habitat assessments. Annual potential wolverine denning area (PWDA) was thresholded from a 36-year (1985 – 2020) snow reanalysis model with three different spatial discretizations: 1) 480 m grid cells (D480), 2) 90 m grid cells (D90), and 3) 480 m grid cells with implicit representations of subgrid snow spatial heterogeneity (S480). Relative to the D480 and S480 discretizations, D90 resolved shallower snow deposits on slopes between 3050 and 3350 m elevation, decreasing PWDA by 10%, on average. In years with warmer and/or drier winters, S480 discretizations with subgrid representations of snow heterogeneity increased PWDA, even within grid cells where mean 15 May SWE was less than the SWE threshold. These simulations increased PWDA by upwards of 30% in low snow years, as compared to the D480 and D90 simulations without subgrid snow heterogeneity. Despite PWDA sensitivity to different snow spatial discretizations, PWDA was controlled more by annual variations in winter precipitation and temperature. However, small changes to the SWE threshold (± 0.07 m) and threshold date (± 2 weeks) also affected PWDA by as much as 82%. Across these threshold ranges, PWDA was approximately 18% more sensitive to the SWE threshold than the threshold date. However, the sensitivity to the threshold date was larger in years with late spring snowfall, when PWDA depended on whether modeled SWE was thresholded before, during, or after spring snow accumulation. Our results demonstrate that snow thresholds are useful but may not always provide a complete picture of the annual variability in snow-adapted wildlife denning opportunities. Studies thresholding spatiotemporal datasets could be improved by including 1) information about the fidelity of thresholds across multiple spatial discretizations, and 2) uncertainties related to ranges of realistic thresholds.

Justin M. Pflug↗

NASA NTRS2016

A Space-based, High-resolution View of Notable Changes in Urban Nox Pollution Around the World (2005 - 2014)

Nitrogen oxides (NOxNO+NO2) are produced during combustion processes and, thus may serve as a proxy for fossil fuel-based energy usage and committed greenhouse gases and other pollutants. We use high-resolution nitrogen dioxide (NO2) data from the Ozone Monitoring Instrument (OMI) to analyze changes in urban NO2 levels around the world from 2005 to 2014, finding complex heterogeneity in the changes. We discuss several potential factors that seem to determine these NOx changes. First, environmental regulations resulted in large decreases. The only large increases in the United States may be associated with three areas of intensive energy activity. Second, elevated NO2 levels were observed over many Asian, tropical, and subtropical cities that experienced rapid economic growth. Two of the largest increases occurred over recently expanded petrochemical complexes in Jamnagar (India) and Daesan (Korea). Third, pollution transport from China possibly influenced the Republic of Korea and Japan, diminishing the impact of local pollution controls. However, in China, there were large decreases over Beijing, Shanghai, and the Pearl River Delta, which were likely associated with local emission control efforts. Fourth, civil unrest and its effect on energy usage may have resulted in lower NO2 levels in Libya, Iraq, and Syria. Fifth, spatial heterogeneity within several megacities may reflect mixed efforts to cope with air quality degradation. We also show the potential of high-resolution data for identifying NOx emission sources in regions with a complex mix of sources. Intensive monitoring of the world's tropical subtropical megacities will remain a priority, as their populations and emissions of pollutants and greenhouse gases are expected to increase significantly.

spatial heterogeneity↗

NASA NTRS1971

Shock-metamorphic effects in the Luna-16 soil sample from Mare Fecunditatis

The results of intensive studies indicate that shock-metamorphic effects, characteristic of meteorite impact and virtually identical to those observed in Apollo samples, are common in fragments of the Luna-16 soil sample from Mare Fecunditatis. Two types of shock effects are present: (1) deformation and partial melting features in rock and mineral fragments (1-2 percent of fragments); and (2) heterogeneous glasses and glassy breccias produced by shock melting (70-80 percent of fragments). Shock effects were observed in pyroxene (deformation twin lamellae, multiple planar shock lamellae, extreme mosaicism, partial isotropization); in plagioclase (planar shock lamellae, complete isotropization to form maskelynite); and in basalt fragments (plagioclase isotropization, selective partial melting). The glasses exhibit several characteristics of shock melting, especially: (1) diversity in chemical composition; (2) association with shock mineral fragments and Ni-Fe spherules; and (3) heterogeneous schlieren and incipient fusion of mineral inclusions. Two types of source rocks are present in the Luna-16 sample; basaltic (85-90 percent) and feldspathic (10-15 percent). The basaltic rocks are predominant and generally occur as unshocked fragments, indicating that they form the bedrock underlying Mare Fecunditatis.

French, B. M.↗

NASA NTRS1972

Gas Surface Interactions Occurring on Materials Within Ultrahigh Vacuum

The physical adsorption of nitrogen on the chemically cleaned surfaces of Pyrex, 347 stainless steel and polycrystalline nickel was investigated over the pressure range 1 x 10 to the minus 12th power to 3 x 10 to the minus 7th power torr and for temperatures 77.4 and 87.4 K. The adsorption data were linearized by the Dubinin-Radushkevich equation. The metal surfaces were cleaned by electron impact desorption (EID) and the desorbed gases analyzed by mass spectrometry. Work function measurements were also used to indicate changes in the surface condition following an EID dose. At least a monolayer of gas was observed to desorb from the metal surfaces. The isotherms revealed that the metal surfaces were very heterogeneous and that the Pyrex surface had been leached. The calculated isosteric heats of adsorption indicated that the relative order of the physical binding of nitrogen to the solids was 347 stainless steel Pyrex nickel. A relationship was observed to exist in the dynamic technique between the equilibration time and the pressure above the absorbed layer. The slope of the log-log plot of these parameters was found to be sensitive to the surface heterogeneity and may be related to the activation energy for surface diffusion of physically absorbed molecules.

Outlaw, R. A.↗

NASA NTRS1972

Effects of n-dominance and group composition on task efficiency in laboratory triads.

Task-oriented triads were formed into various homogeneous and heterogeneous combinations according to their scores on the n-dominance personality trait of the Edwards Personal Preference Schedule. Five group categories were used. The group task required a consensus decision on each trial. High cooperation and interdependence were reinforced by partially restricting the communication network. Results showed heterogeneous groups significantly better at organizing their group communication processes. They consequently performed the task more efficiently than homogeneous triads.

Lampkin, E. C.↗