Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heat conduction modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

The stable auroral red arc of October 31 - November 1, 1968 and its interaction with the neutral atmosphere

Satellite observations of electron temperature and the topside electron density structure are used to calculate the red arc according to the thermal conduction model. In this model, energy from the magnetosphere flows in the electron gas along geomagnetic field lines into the ionosphere. This energy heats the ambient F-region electrons sufficiently to excite the oxygen atoms to the O I(1D) level by collisional impact giving rise to the 6300 A emission characteristic of the arc. For the 31 October/1 November 1968 red arc, the calculated emission rate, geographical position, and horizontal extent of the red arc are in agreement with the photometric data obtained by airglow observatories. Almost all of the energy conducted into the red arc is ultimately transferred to the neutral gas through elastic and inelastic collisions. This energy drives a large thermal cell and the circulation extends the influence of the arc thousands of kilometers beyond the region of direct heat input. The calculated neutral gas temperature response to electron heating within the arc is small.

Roble, R. G.↗
NASA NTRS1973

Role of convection in the moon.

Conduction solutions of the problem of the moon's thermal history can be unstable to solid state convection. To examine the role of solid convection, the stability of models in which the initial distribution of radioactive heat sources is homogeneous and the initial temperature profile is due to accretional heating is analyzed in detail. Growth rates of instabilities are compared with the appropriate conduction times in order to determine the effective viscosities for which solid convection is a dominant process. It is found that instability growth may not have been rapid enough to prevent the extensive partial melting predicted by conduction theory, but convection after resolidification is likely to have occurred, and thus the moon would have cooled faster than it would if it were purely conducting.

Cassen, P.↗
NASA NTRS2008

Cold Start of a Radiator Equipped with Titanium-Water Heat Pipes

Radiator panels utilizing titanium-water heat pipes are being considered for lunar applications. A traditional sandwich structure is envisioned where heat pipes are embedded between two high thermal conductivity face sheets. The heat pipe evaporators are to be thermally connected to the heat source through one or more manifolds containing coolant. Initial radiator operation on the lunar surface would likely follow a cold soak where the water in the heat pipes is purposely frozen. To achieve heat pipe operation, it will be necessary to thaw the heat pipes. One option is to allow the sunlight impinging on the surface at sunrise to achieve this goal. Testing was conducted in a thermal vacuum chamber to simulate the lunar sunrise and additional modeling was conducted to identify steady-state and transient response. It was found that sunlight impinging on the radiator surface at sunrise was insufficient to solely achieve the goal of thawing the water in the heat pipes. However, starting from a frozen condition was accomplished successfully by applying power to the evaporators. Start up in this fashion was demonstrated without evaporator dryout. Concern is raised over thawing thermosyphons, vertical heat pipes operating in a gravity field, with no wick in the condenser section. This paper presents the results of the simulated cold start study and identifies future work to support radiator panels equipped with titanium-water heat pipes.

Jaworske, Donald A.↗
NASA NTRS2025

Metallurgical and Thermal Properties of 57Ni-40Ti-3Hf (wt%)

Selected properties of 57Ni-40Ti-3Hf (wt%) were measured to further develop this material for use in aerospace rolling-element bearings. The average grain size and microindentation hardness of the material at room temperature were 90 μm and 549 HV, respectively. From room temperature to 500 °C, electrical resistivity increased from 8.9×10–7 to 11.3×10–7 Ω⋅m, thermal expansion coefficients varied from 1.1×10–5 to 1.2×10–5 mm/mm⋅°C, specific heat increased from 0.44 to 0.53 W⋅sec/g⋅K, thermal diffusivity rose from approximately 0.003 to 0.005 cm2/sec and thermal conductivity increased from approximately 0.09 to 0.19 W/cm⋅K. The behavior of the material can be explained by well-known metallurgical theory. These results are expected to provide a basis for design and modeling of future aerospace components.

rule of mixtures↗
NASA NTRS1979

The effect of energetically produced O2/+/ on the ion temperatures of the Martian thermosphere

The heating rates and ion temperatures of the Martian thermosphere resulting from the thermalization of the energetic O2(+) ions produced by the reactions of the solar ionization products CO2(+) and O(+) with neutral particles are calculated and the effects of small magnetic fields on the ion thermal balance are investigated. The energy transfer and transport of energetic ions is modelled by solving the continuity equation for the ions over a series of finite energy cells yielding the equilibrium densities as a function of energy and altitude. Particles which are able to proceed upwards without collisions are dealt with separately from the continuity equation. It is shown that the thermalization of the energetic O2(+) ions can greatly increase ion temperatures above 200 km compared to those calculated for only ambient electron heating. Current solar wind interaction models predict that small horizontal magnetic fields act to restrict the ion thermal conductivity and to increase upper altitude ion temperatures. The combined effects of these processes provide a partial agreement with measurements made by Viking 1.

Rohrbaugh, R. P.↗
NASA NTRS1980

Semiempirical models of chromospheric flare regions

Homogeneous plane-parallel semiempirical flare model atmospheres which reproduce observations in lines and continua of H I, Si I, C I, Ca II, and Mg II have a thin transition zone at the top of the enhanced chromosphere, indicating a significant amount of heating from the zone to the temperature minimum level. The minimum temperature is located deeper and is higher than in the quiet-sun and active-region models. The results do not agree with the particle-heated theoretical models, and it is suggested that the models of Brown (1973) and Henoux and Nakagawa (1977, 1978) do not include an essential term for heat conduction in their energy balance equations. It is concluded that substantial Ly-alpha radiative heating occurs in the upper chromosphere resulting from the conductive energy flux in the transition zone where the Ly-alpha line cools the gas.

Machado, M. E.↗
NASA NTRS1985

Thermal conductivity of boron carbides

Knowledge of the thermal conductivity of boron carbide is necessary to evaluate its potential for high-temperature thermoelectric energy conversion applications. Measurements have been conducted of the thermal diffusivity of hot-pressed boron carbide BxC samples as a function of composition (x in the range from 4 to 9), temperature (300-1700 K), and temperature cycling. These data, in concert with density and specific-heat data, yield the thermal conductivities of these materials. The results are discussed in terms of a structural model that has been previously advanced to explain the electronic transport data. Some novel mechanisms for thermal conduction are briefly discussed.

Wood, C.↗
NASA NTRS1986

Mass spectrometric gas composition measurements associated with jet interaction tests in a high-enthalpy wind tunnel

Knowledge of test gas composition is important in wind-tunnel experiments measuring aerothermodynamic interactions. This paper describes measurements made by sampling the top of the test section during runs of the Langley 7-Inch High-Temperature Tunnel. The tests were conducted to determine the mixing of gas injected from a flat-plate model into a combustion-heated hypervelocity test stream and to monitor the CO2 produced in the combustion. The Mass Spectrometric (MS) measurements yield the mole fraction of N2 or He and CO2 reaching the sample inlets. The data obtained for several tunnel run conditions are related to the pressures measured in the tunnel test section and at the MS ionizer inlet. The apparent distributions of injected gas species and tunnel gas (CO2) are discussed relative to the sampling techniques. The measurements provided significant real-time data for the distribution of injected gases in the test section. The jet N2 diffused readily from the test stream, but the jet He was mostly entrained. The amounts of CO2 and Ar diffusing upward in the test section for several run conditions indicated the variability of the combustion-gas test-stream composition.

Lewis, B. W.↗
NASA NTRS1988

A comparison of numerical methods for the prediction of two-dimensional heat transfer in an electrothermal deicer pad

Transient, numerical simulations of the deicing of composite aircraft components by electrothermal heating have been performed in a 2-D rectangular geometry. Seven numerical schemes and four solution methods were used to find the most efficient numerical procedure for this problem. The phase change in the ice was simulated using the Enthalpy method along with the Method for Assumed States. Numerical solutions illustrating deicer performance for various conditions are presented. Comparisons are made with previous numerical models and with experimental data. The simulation can also be used to solve a variety of other heat conduction problems involving composite bodies.

Deicer↗
NASA NTRS1988

Thermal effects in two-phase flow through face seals

When liquid is sealed at high temperature, it flashes inside the seal due to pressure drop and/or viscous heat dissipation. Two-phase seals generally exhibit more erratic behavior than their single phase counterparts. Thermal effects, which are often neglected in single phase seal analyses, play an important role in determining seal behavior under two-phase operation. It is necessary to consider the heat generation due to viscous shear, conduction into the seal rings and convection with the leakage flow. Analytical models developed work reasonably well at the two extremes - for low leakage rates when convection is neglected and for higher leakage rates when conduction is neglected. A preliminary model, known as the Film Coefficient Model, is presented which considers conduction and convection both, and allows continuous boiling over an extended region unlike the previous low-leakage rate model which neglects convection and always forces a discrete boiling interface. Another simplified, semi-analytical model, based on the assumption of isothermal conditions along the seal interafce, has been developed for low leakage rates. The Film Coefficient Model may be used for more accurate and realistic description.

Basu, Prithwish↗
NASA NTRS1988

Binary phase correlated X-ray intensity variations and flaring activity in the RS CVn binary HR 1099

The monitor proportional counter and the imaging proportional counter of the Einstein Observatory were used to observe the X-ray variability of the RS CVn binary HR 1099. The X-ray intensity is found to vary with the 2.837-day period of the binary. An intense X-ray flare was noted on February 17, 1980. The present results are explained using a star spot model, and it is suggested that the flare heated plasma cools either mainly by radiation or equally by conduction and radiation.

Agrawal, P. C.↗
NASA NTRS1989

A parametric heat transfer study for cryogenic ball bearings in SSME HPOTP

A numerical modeling is to examine the effects of coolant convective heat transfer coefficient and frictional heating on the local temperature characteristics of a ball element in Space Shuttle Main Engine (SSME) High Pressure Oxidizer Turbopump (HPOTP) bearing. The present modeling uses a control-volume based, finite-difference method to solve the non-dimensionalized heat conduction equation in spherical coordinate system. The dimensionless temperature is found as a function of Biot number, heat flux ratio between the two race contacts, and location in the ball. The current results show that, for a given cooling capability, the ball temperature generally increases almost linearly with the heat input from the race-contacts. This increase is always very high at one of the two contacts. An increase in heat transfer coefficient generally reduces the ball temperature and alleviates the temperature gradient, except for the regions very close to the race contacts. For a 10-fold increase of heat transfer coefficient, temperature decrease is 35 percent for the average over entire ball, and 10 percent at the inner-race contact. The corresponding change of temperature gradient displays opposing trends between the regions immediately adjacent to the contacts and the remaining portion of the ball. The average temperature gradient in the vicinity of both contacts increases approximately 70 to 100 percent. A higher temperature gradient produces excessive thermal stress locally which may be detrimental to the material integrity. This, however, is the only unfavorable issue for an increase of heat transfer coefficient.

Chyu, Mingking K.↗
NASA NTRS1990

Prediction of the aerodynamic and thermal environment in turbines

A numerical study of the steady, viscous flow prediction capabilities of the three-dimensional turbine stage code ROTOR3 is presented. Computations were performed with RAI3DC, a cascade version of ROTOR3 capable of being run in a planar or annular mode. Computed results are compared with experimental data obtained for Hodson's cascade, Kopper's cascade, and United Technologies Research Center's Large Scale Rotating Rig (LSRR) first-stage stator. The code's predictive capability is assessed in terms of the accuracy of predicted airfoil loadings, performance (including secondary flows in the LSRR case), boundary layers, and heat transfer. A grid refinement study was conducted in the LSRR case in an effort to more accurately model the boundary layers on the airfoil and endwall surfaces. The effects of the inlet total pressure profile in secondary flow prediction were also assessed.

Griffin, Lisa W.↗
NASA NTRS1994

Experimental design for the evaluation of high-T(sub c) superconductive thermal bridges in a sensor satellite

Infrared sensor satellites, which consist of cryogenic infrared sensor detectors, electrical instrumentation, and data acquisition systems, are used to monitor the conditions of the earth's upper atmosphere in order to evaluate its present and future changes. Currently, the electrical connections (instrumentation), which act as thermal bridges between the cryogenic infrared sensor and the significantly warmer data acquisition unit of the sensor satellite system, constitute a significant portion of the heat load on the cryogen. As a part of extending the mission life of the sensor satellite system, the researchers at the National Aeronautics and Space Administration's Langley Research Center (NASA-LaRC) are evaluating the effectiveness of replacing the currently used manganin wires with high-temperature superconductive (HTS) materials as the electrical connections (thermal bridges). In conjunction with the study being conducted at NASA-LaRC, the proposed research is to design a space experiment to determine the thermal savings on a cryogenic subsystem when manganin leads are replaced by HTS leads printed onto a substrate with a low thermal conductivity, and to determine the thermal conductivities of HTS materials. The experiment is designed to compare manganin wires with two different types of superconductors on substrates by determining the heat loss by the thermal bridges and providing temperature measurements for the estimation of thermal conductivity. A conductive mathematical model has been developed and used as a key tool in the design process and subsequent analysis.

Scott, Elaine P.↗
NASA NTRS1995

Effects of cavity dimensions, boundary layer, and temperature on cavity noise with emphasis on benchmark data to validate computational aeroacoustic codes

This report documents the results of an experimental investigation on the response of a cavity to external flowfields. The primary objective of this research was to acquire benchmark of data on the effects of cavity length, width, depth, upstream boundary layer, and flow temperature on cavity noise. These data were to be used for validation of computational aeroacoustic (CAA) codes on cavity noise. To achieve this objective, a systematic set of acoustic and flow measurements were made for subsonic turbulent flows approaching a cavity. These measurements were conducted in the research facilities of the Georgia Tech research institute. Two cavity models were designed, one for heated flow and another for unheated flow studies. Both models were designed such that the cavity length (L) could easily be varied while holding fixed the depth (D) and width (W) dimensions of the cavity. Depth and width blocks were manufactured so that these dimensions could be varied as well. A wall jet issuing from a rectangular nozzle was used to simulate flows over the cavity.

Ahuja, K. K.↗